Report of PO wise MIRO and GRN

Dear all
is there any standard report to know the PO wise MIRO and GRN details.
This is required to be run periodically for a range of PO.
Points will be given
thanks
sap

Hi,
In t code ME23N you have Purchase order history tab. there you will get the details.
are you looking somethign else. please clarify
regs
sunoj

Similar Messages

MB5B Report for Date Wise Stock and Value

Hi,
I am Taking MB5B Report for Date Wise Stock and Value.
But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
I have another Doubt in these report three Stock type indicaters are there like these.
1.Storage Location / Batch Stock
2.valuated Stock
3.Special Stock.
But i have one doubt what is defferent these
1.Storage Location / Batch Stock
2.valuated Stock

Hi Prasad,
Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
Regards
Karthick

Custom MIRO and GRN duty value difference

Dear Guru's
When MIRO is done, the custom duty clearing for INR 6,821,482.80.
When GRN is done for above, the Custom Duty clearing in GRN doc is for INR 6,828,297.31.
There is a difference of INR 6,814.51, small difference in each custom duty between Custom MIRO and GRN.
Thanks in advance for your suggestions.
Edited by: sanjay.s on Dec 17, 2010 12:36 PM

if you make Goods receipt with respect to PO with movement type 101 that is GRN.
If you make the reverse posting of the above with movement type 102 then it is cancellation of GRN, the it will pick entire amount.
If you maintains moving average price for that material it pick the price available at time of reversal or cancelation

Report for bom wise target and actual cost as well as qty at line item

Dear Experts,
Is there any standard tcode for bom wise target and actual cost as well as qty at line item level for the month.
there is one tcode s_alr_87013127 but user has to double click in order to get line item details.
I want to see line item wise breakup/bom wise target and cost cost as well as qty.
Thanks in advance.
regards
RK

Dear experts,
I am still looking for a revert.
regards
RK

Asset Report by Location wise with address & other details

Hi,
Can any one guide me any reports are available for Asset Report by location wise, address and
other details.
Thanks in advance.
Regards,
GB

Hi Govind,
I have solution for your requirement.
Go to Tcode OAVI
Create new entries.
Difine a name for the sort version and enter description for the same.
Choose fields for display in standard SAP asset reports.
For your case enter table name ANLAV field names MENGE, STORT, and KOSTL. etc
Here you can choose various other fields also.
Then use this sort version while runnnig the SAP standard asset reports.
By using this sort version you can able to to see the quantity, location and cost center fields available during any any asset balances report. So take a printout of the asset balances report S_ALR_87011964 - Asset Balances by Asset Class along with the above fields and go for physical verification
Note: This development you can directly do it in your production system
This will defenetely fix your requirement.
Add Point*s, if problem resolved.
Thanks,
Srinu

Material wise reciept and Issue report with Opening and Closing Stock

Hi
I need a report,Material wise Receipt and issue with Opening and Closing stock.Is there any standard report available in SAP ?
Or we have to go for Customised Report.
Please reply

Hi,
MB5B gives total receipts - if i click on the receipts i can view the multiple material documents - BUT is there any way to drill down the reciepts or view the breakup of the receipts on the same screen OR is there any other report for this.
Regards,
Laxmi

Report display will be 2010,2011 year wise display and 2012 Month display

Hi,
       I want to Create Report, output will be 2010,2011 year wise display, 2012,2013 month wise display and Fiscal year quarter display, all are display based on input value of Fiscal year data, please anyone guide me, How to do?
Thanks,
Nandish

Hi,
      How to assign KF to Time Characteristics,My report dsplay will be like this, For example
      Input Fiscal YEAR=2010 to 2013
                    Material              2010   2011 APR.2012 to MARCH 2013
Quantity              A1              200      300        *                    *
Quantity              A2              300      400        *                    *
Also Display quarter wise display. How to do
Thanks,
Nandish

Ageing wise vendor and customer report

hi....
Where i can get ageing wise vendor and customer report?
Thanks & Regards
Rekha shrama

Hello
First configure credit management & customise.
A/R Summary
Degree of ageing
You can set the allowed degree of ageing in Customizing for Sales, under Basic Functions ® Credit Management/Risk Management ® Credit Management ® Define Automatic Credit Control.
Under Checks in financial accounting/ old A/R summary, you can enter the permitted degree of ageing for the A/R summary, in the fíelds Permitted days and Permitted hours. Here, you can define how old the A/R summary can be, in order to be called up for a check. If the permitted degree of ageing for the A/R summary is exceeded in the credit check, then the document is blocked.
Fields allowed days and allowed hours are only available for entry if you have entered an X in field Read A/R Summary in Customizing. The path is: Accounts Receivable and Accounts ® Credit Management ® Credit Control Account ® Make basic settings for credit management.
Updating
The A/R summary is either sent periodically (with the help of the report RFCMCRCV) from central Financial Accounting to the decentralized Sales and Distribution units according to ALE distribution model or, if an obsolete A/R summary is presented, updated for the credit check by the system per remote function.
In order that the system is burdened as little as possible, SAP recommends you stick to the following order:
Program run: Incoming payments in central FI
Program run: Distribution A/R summary from central FI to decentralized Sales and Distribution units
Program run: Renewed credit check for blocked sales documents in decentralized Sales and Distribution units
Status Management for Obsolete A/R Summary
If the A/R summary is obsolete, the credit status Credit data obsolete is set. This means that the document is blocked, and appears in the credit representativeu2019s worklist. In Customizing for Sales, in the section Automatic Credit Control, for the single, aforementioned checks, for which FI data is necessary, you can define whether a warning appears in the obsolete data, or whether a status is set.
If you are working with the A/R summary, and would like to re-process obsolete data, it is recommended that you set a status.
Reg
suresh

Regarding Report on purchase order purchase requesition and GRN No.

Dear All,
              I am creating ALV report in which. I want all purchase order (EBELN), their respetive Purchase Requesition(BANFN)
              And GRN No(MBLNR)., if they are created. But all purchase order should be displayed evenif their GRN have not been
             made. GRN only haveing movement type 101 and 102. i.e. of 50 series and not 49 series.
                              i want tlike this
For Ex:-
                      EBELN           BANFN          MBLNR
                  45000223       1000223       5000080
                  45000245                            5000056
                 45000676
                 45000848     .

Hi,
1. Fetch all the Purchase Orders from EKKO
2. Fetch Purchase Req from EBAN for all entries in above selected internal table where EBELN = EKKO-EBELN
3. Fetch GR info from EKBE for all entries in first selected internal table where EBELN = EKKO-EBELN and VGABE = '1'. (this indicates GR for a PO) and BWART in ('101', '102').
4.
Loop through EKKO.
        T_FINAL-EBELN = EKKO-EBELN.
        Read EBAN with key EBELN = EKKO-EBELN.
        T_FINAL-BANFN = EBAN-BANFN.
        Loop through EKBE where EBELN = EKKO-EBELN. (there can be multiple docs for a single PO)
             T_FINAL-MBLNR = EKBE-MBLNR.
             Append T_FINAL.
        Endloop.
        If SY-SUBRC is not equal to 0. (If no GR happend, control will not go to EKBE loop, still you need to display it in ALV)
            Append T_FINAL.
       Endif.
    Endloop.
5. Display the contents of T_FINAL in ALV.
Hope this helps you !!!
Regards,
Ganga

Shift wise confirmation and shift wise production report

Hi Guys
To get shift wise production confirmation and reports, I have maintained the following setting ,
1- maintained shift sequence and with shift grouping,
2- assigned the shift grouping to work centers,
other theses settings, what other setting to be done for shift wise confirmations and also production reports,
thanks in advance,
mohan.m

Hi Mohan,
We had similar requirement for our manufacturing plant.
We have done Z-Development for
1) Shiftwise - Linewise Production
2) Shiftwise - Beltwise Packing
1) for that we have define new control key
2) That key assigned to master recipe.
(Why new control key ?
New control key is defined specifically to generate this report. Because Auto GR is done only at the end of packing and not at the end of shift. But we want report for each shift. That's why after each shift end proposonatly that much qty is confirmed by new control key. However actual Goods receipt is only happened while completing total manufacutring or packing)
3) That control kept as base of Z-development.
4) As far as shift timings are concerned, we have taken actual shift timings of our manufacturing plant.
Hope this will help to resolve your problem.

PO Creation and GRN date report

Pls Suggest any std report for the below values
PO Number PO Creation date PO Line Item Material Material Document No Material Document Date

HI,
Using T-code MB51 - Material Document List, your requirement full-filled and the details to be given as follows.
Plant : __________
Posting Date : __________ to _______ (for the period 01.10.2010 to 31.10.2010 if required)
under Data Source heading 'Database' option to be ticked and then executed the report (run clock).
After execute the report shown material document list and then top of the report blue color button( Detail list) press, the report shown PO number, PO date,PO line item with material description, material doc.no. and material doc.date as you needed.
Hope, it is full-filled your requirement.
Regards,
K.Rajendran

Asset balance report Vendor/supplier wise

Dear All,
I want to take asset balances report vendor/ supplier wise.
Is any report avaliable like this?
Thanks & Regards,
Pritam

Hi,
you can use sort variants which contain the vendor information. You can find some information in SAP notes 98739 and 546856.
Regards,
Markus

Report for Branch wise Trail Balance & Profitability

Hi,
I need a report for Branch wise trail balance and Profitability. Is there any standard report in FI for that or do i need to define with Report painter functionality?
Please advise
BR,
Yadayya

Trial balance and profit and loss account can be drawn atleast at Profit center level or business place through F.01.
As you have mentioned branch , how have you treated branch ? are they profit centers or business area ?
Else you can very well use report painter for FAGLFLEXT and draw the details as desired .

Report for MIGO done MIRO pending

All SAP Gurus,
We require the list of MIGO vs MIRO numbers, so that we can list out the MIGO for which MIRO have not been posted.
Is there any report by which we can we can list the MIGO vs MIRO numbers.
I'm aware of the fact that multiple MIRO can exist against a MIRO and vice versa.
Regards,

Check table EKBE. PO History Category 'E' for GR and 'Q' for Invoice.
Hope this will also help you in future.
Thnx
Abhi

To prepare daily production report in grade wise

Hi,
Need your help regarding grade wise Finish Goods. My finish goods product code is in database 1601001. When bulk receipt from production how to separate grade wise quantity.
Example:
My production order quantity is 100000 pcs and receipt from production in stock is 95000 pcs. Now in 95000 pcs, 75000 are grade u201CAu201D quality and rest of 20000 pcs are u201CBu201D quality.
There is any option that I can prepare daily production report in grade wise.
Regards,
Mizan

Hi.....
Go to Item master data whihc you want to maintain Gradewise.
In general tab you find Serial or Batch Number under which just select Batch and select on every transaction......
This will hjelp you to manage your inventory by Batches which you consider as grade......
Regards,
Rahul

Report of PO wise MIRO and GRN

Similar Messages

Maybe you are looking for