Report of projects across cost centers and vice versa

Hi friends,
Do we have any standard report of Projects across Cost Centers and vice versa?
In our case, it is statistical cost center postings and real project postings. How can we get a standard report of Projects across Cost centers ?
thanks in advance,
San

Refer the thread
Reports on Statistical WBS
In the report CJI3- Actual Line Item Report, pull in the field Partner Object in this case it would be Cost Centre (where actuals are posted)
Regards
Sreenivas

Similar Messages

Do we have a General Ledger report that combines both cost centers and WBS?

Do we have a General Ledger report that combines both cost centers and WBS?

Have you tried FAGLL03

Assignment of cost centers and profit centers

Hi Friends,
can anybody give me a series of steps of assignment of cost centers and profit centers, like I know there is a T.code 3KEH, but I really dont know the chronological (step by step) order of steps to be followed to assign the cost centers to profit centers, as profit centers cannot be directly posted to and as the postings.
And above all when I see the info about 3KEH, it says we need to assign only balance sheet items there and not cost items.
Basically I've not studied Profit center accounting Properly and so I'm facing this problme
If there is any documentation on this can anyone pass this on to: kiransandhyaATyahooDOTcom
regards
sandhya

Hi Sridhar,
Thnx for replying. I've gone ahead and defined cost and profit centers and did what you have told me to. Now this is where I'm stranded. How do I map profit and cost centers so that the we get the right kind of reports.
Basically, my question would be: say for eg: if we are defining Company, Co.Code, before completing with Global paramters, there are a series of steps that we need to complete, right.
Like wise, I just wanted to have a series of mandatory steps that I need to follow where the cost centers and profit centers mapping is done, atleast if I have the steps with me then I can go ahead and check the logic as to why should I define a particular step.
Like I mentioned I happened to see some information about 3KEI, so before going to 3KEI or 3KEH, are there any other steps that I need to follow.
I need to get the cost center and profit center reports, so that is what I'm looking for, and what do i need to configure, before getting to that point?
I dont have a great insight into PCA, and I was not a part of the controlling configuration, but because a person has left in between the project, I'm supposed to do this and that is the reason why I dont have much time in doing R&D, and thats the whole reason why I'm seeking inputs which would actually minimise my time of R&D, once I'm able to convince my people, then again I can sit back and try to improvise my self.
regards
sandhya

Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers in fbcj

Hi all ,
I have a requirement to Post Cash Journal Document using FBCJ tcode.
Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers
for exp:
pk   GL a/c   description       amount   cost center profit center
40 400101 telephone exp   500        1403            P 1000
40 400101 telephone exp    100       1404            P 2000
50 200100 cash in hand      600-
   This is My requirement is it possible in fbcj
    Please suggest me.ASAP.
Regards
   Naresh.

Hi,
This you can do it in two ways:
1. Make three header under top level....one Product A, 2nd Product B ( as Billing element) and third as Common expense ( only cost). Now 1st & 2 nd WBS, you have to have sales order linking with individual lint item, for third you will accumulate all the common expense till the period end then make a reposting of the same in desired proportion to both products WBS hierarchy
(This is if you want to have a track on the common expense as well.......like planning, budgeting & control)
After this reposting, run RA for individual billing element and hence you will all the complement detailing and control over Revenue and expense with respect to Product A and Product B individually.
2. If you don't want to maintain that kind of detailing the common expense and keep track of it through project, then have cost centers accordingly and make an assesment/ distribution with respect to expenses accumulated at those cost centers for the period to the respective WBS under each product. Then execute the period end processes for the project.
Or
You can try with have two more line items in the costing sheet as an overhead against common expenses with respect each product.
I hope this should help you.
Regards
Avisek Bhardwaj

Cost centers and budgets filtered by functional locations

Hi All,
I need report containing cost centers and budgets filtered by functional locations.
Regards
Hari

Hi,
Please find the logic below & try it at your system-
Here cost center group is not possible (also i not checked it so do it on your own simultaneously i am trying the same).
Use Table BSEG-> in bseg give the cost center-> with the help of cost center find the account number (field HKONT)-> take this GL account number & got to table COEP-> in this give the GL account number at field 'offsetting account' (field GKONT) & you will get the line item.
Try it & let me know if you have any question.
Thanks

Link beteen cost centers and activities

Hi
We have 180 + cost centers and I want to have 100 + activities.. I want to link these cost centers & activities..Eventually what should happen is when processing transactions with a CO object (cost center, internal order, WBS) in AP posting, recurring entry, depreciation, PO ect the value should also hit the activities at the time it hitting the cost center
I just want to know whether a link can be maintained in the cost center master data to link an activity..
Thanks

HI,
the linkage of cost centers and activity types is done in cost center / act. type master data using the field "cost center category". if you set cost center category to "X" in the cost center, the cost center can only "use" act. types with cost center category "X" (or * which is a wildcard).
In act. type master data you can key in up to 8 different CCtr categories, which allows you to limit activity type "test" to be used for cost center category X and Y and Z.
The possible combinations can be seen in act.rate planning (kp26). Planning is only possible for the combination of cost center / act. type given by the linkage described above.
Best regards, Christian

Cost Centers and distribution rules

I need to allocate costs to profit centers and would like to have the costs be allocated first to the department cost center then distributed to product profit center by %.
Example: An invoice is first allocated to the sales department, then the distribution rule will allocate the cost between 4 product lines (33 % chemical A, 33 % chemical b, 17 % chemical c and 17 % chemical d).
How would I setup the profit centers, cost centers and distribution rule to accomplish the above task.
Thank you,
Wayne

Hi Fred,
I assume you using 8.81?
1. Administration - General Settings - Cost Accounting : Tick "Use Multidimensions" option
2. Financial - Cost Accounting - Dimensions : Tick "Dimension 1" and "Dimension 2".
Give proper description to each dimension, in your case maybe "Department" to Dimension 1 and "Product" to Dimension 2
3. Financial - Cost Accounting - Cost Centers : Create your intended cost centre, "Sales" cost centre with dimension "Department", "Chemical A" to "Chemical D" with dimension "Product"
4. Financial - Cost Accounting - Distribution Rules :
As for your intention to allocate the invoice to Sales Department, since you want to allocate it 100% to Sales Department, you don't need to create a distribution rules, since B1 will automatically create a distribution rule with 100% allocation for each cost centre you created.
As for your production cost allocation, create a distribution rule with your code "DR-P01" as an example, choose dimension "Product", set the Total with "100". In the detail section, choose each cost centre (Chemical A to D), enter respective value and click "Add" button.

Cost centers and profit centers mapping

Hi Friends,
I'm through with defining cost and profit centers. How do I map the cost centers and profit centers. I've gone ahead and assigned the cost elements to cost centers in OKB9, giving 2-Business area mandatory.
I'm just done with defining the profit centers, but i dont have an idea how do I map the profit centers.
pls suggest.
regards
Pallavi

found it

Table for Cost Centers and Org Units

Hi All,
How to retrieve the list of Cost centers and the associated Organization Units?
My HR user is in need of such list...
Can anyone help me out....????
Regards
Pavan

Hi
I dont think you can associate a cost center with org unit, it is normally associated with position/person.
You can check table PA0001 to get the cost center and org unit for a personnel number.
Is this your requirement ?
Thanks,
Shrinivas

How to extract cost centers and their number of appendant assets to internal table?

Hello,
my aim is to get an internal table with all my selected cost centers and the number of their appendant assets to pass this to a SmartForm.
The result would be something like:
cost center
number of assets
100000
65
100001
13
100002
105
100007
3
100008
57
What I did so far: I made up an SQL statement, which I tested in the transaction DBACOCKPIT (Performance -> Additional Functions -> SQL Command Editor), which works fine and gives me exactly what I need.
The SQL statement is (slightly simplified, and exemplarily only for costcenters 100000 and 100001):
select costcenter, count( assetnr ) as numberofassets from
     ( select anlz.kostlv as costcenter, anla.anln1 as assetnr, anla.deakt, anla.aktiv from anla
          join anlz on anla.mandt = anlz.mandt and anla.bukrs = anlz.bukrs and anla.anln1 = anlz.anln1
          where anlz.kostlv = '0000100000' or anlz.kostlv = '00000100001' )
group by costcenter
Now, I want this SQL statement to work in my ABAP code. To match the requirements of the ABAP Editor (SE80), I
- replaced all the point delimiters (.) by a tilde (~),
- removed all commas,
- added "into costcenter_assetcount" to store my result in an internal table.
So in my ABAP code the SQL looks like this (alias assetnr inb the first line is printed in red):
select costcenter count( assetnr ) as numberofassets from
   ( select anlz~kostlv as costcenter anla~anln1 as assetnr anla~deakt anla~aktiv from anla
       join anlz
         on anla~mandt = anlz~mandt
         and anla~bukrs = anlz~bukrs
         and anla~anln1 = anlz~anln1
       where anlz~kostlv = '0000100000' or anlz~kostlv = '00000100001' )
    into costcenter_assetcount
group by costcenter
Checking my code, ABAP Editor gives me a syntax error pointing to the SELECT of the subquery (it's in German, because this is my default language setting). After my first FROM, ABAP seems to expect a table name instead of a subquery.
Programm Z_FIAA_ASSETCOUNT        @0A\QFehler@
"SELECT" ist im ABAP-Dictionary nicht als Tabelle, Projektions- oder
Datenbank-View deklariert.
Isn't it possible to use a SELECT subquery after my FROM in the ABAP Editor?
What would be the best practice to put the data in an internal table?
Looking forward to your comments!

Hi,
I think, You make it to complicated, try this:
select anlz~kostlv as costcenter count( distinct anla~anln1 ) as numberofassets
   from anla
        join anlz
          on anla~mandt = anlz~mandt
          and anla~bukrs = anlz~bukrs
          and anla~anln1 = anlz~anln1
        where anlz~kostlv = '0000100000' or anlz~kostlv = '00000100001'
   group by anlz~kostlv.
Jarek

Email sent on my iphone 5 does not show in the sent folder in mail on my macbook pro and vice versa especially since update to Yosemite

I have an iphone 5 and a Macbook pro. Since upgrading to Yosemite, when I send an email from my yahoo email account or another email account linked to my website, on my iphone, the emails don't show in the sent folder in mail on my macbook pro and vice versa.
I have deleted the accounts and re-created them on both my iphone and macbook pro but the samething keeps happening.
When last I was at the istore, they were unable to sort it out and said I needed to book it in.
Any suggestions that will prevent me from booking my macbook pro in are welcome.

Hi,
Are you saying you are trying to synch iMessages across two iPhones ?
Or do you mean you are trying to get iMessage that were synced to one iPhone to show on another ?
Whilst the first is possible - from the date you add the second iPhone the second is not possible.
10:11 PM Saturday; January 5, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Navigate from WebDynpro Application to BPS Layout and vice versa

Hi,
Please see the following Problem Statement:
We have WebDynpro applications and BPS applications in our project. All the applications are published via SAP Portal. Both areas (WebDynpro and BPS) have same selection screen (Selection fields are common). Is it possible to call
WebDynpro application from BPS layout (on click of button)and also passing the selection parameters to the WebDynpro application and vice-versa.
- Sujal Shah

Hi,
You can you free tool from Oracle called OMWB (Oracle Migration Workbench) for SQL Server to Oracle.
For more details, visit http://www.oracle.com/technology//tech/migration/workbench/index.html
From Oracle to SQL Server, there are third party tools available.
Cheers,
Harshw
Message was edited by:
[email protected]

How to connect an non-hana-ewm with an Hana-ECC and vice versa

Hello,
for our migration project planning I am wondering how to connect EWM on SAP with ECC on Hana and vice versa.
As it is, both systems are (productive) on non - hana with actual SAP-Release and have to be migrated.
The background of my question: we may be not able do the "big bang" thing to migrate ERP ECC607 and EWM (with special Add-Ons) at one point to Hana (DMO) and therefore may need an interim solution. I checked ETL and LTS as "connectors" but they - from my point of view - are one-way solutions from EWM to ECC/Hana -not bidirectional.I Found some questions concerning the same theme in the net but no solution at all till now..
How about BODS ? (Didnt work with it yet)
Best regards,
Ronald

Great. So I have to either install OS X, or buy a new mcahine. Can OS X run on a G3 without grinding to a halt?
By the way, I cannot get the iPod to even mount when connected via firewire. The USB/firewire PCMCIA card does not have drivers for OS 9. I thought that this support was built into OS 9. The USB port works (although the iPod will not mount when connected via USB either). Any ideas?
Thanks

I would like to delete emails on my PC when I delete them on my Ipad (and vice versa, if possible). How do I set this up? Thanks.

I would like to delete emails from my PC when I delete them from my Ipad (and vice versa, is possible). How do I set this up? Thanks in advance.

The ability to do that would depend on the type of email account that you have. If it is a POP account, it cannot be done. If it is an IMAP account, it should sync across devices automatically. If you are not sure what type of account it is, who is your email provider?

SSRS subscriptions in default zone of sharepoint 2013 are not showing in intranet zone and vice versa.

one of the Sharepoint 2013 site collection has alternate access mappings created. Default site is .com and intranet is .local.
So when we add SSRS subscription in .com - they are not showing in .local and vice- versa. How do we fix this so the subscriptions are same in both .com and .local.

Hi spanda,
Per my understanding that you have configured the alternate access mappings which Default site is .com and intranet is .local. But the subscription in one of the site will not list in another mapped site, right?
Actually, if you are on a different Alternate Access Mapping other than the Subscription was created on, we will get no subscriptions, Because we are using the method "Microsoft.ReportServices.SharePoint.UI.ManageSubscriptionPages"
to deal with the logic by creating the value for "m_reportUrl" using the current context of the URL the user is using and passing that to the "SubscriptionListControl". You can find the code in this article if you have some
knowledge of development:
SQL Server Reporting Services ignores Alternate Access Mappings When Checking for Report Subscriptions
I recommand you to submit an feedback at
https://connect.microsoft.com/SQLServer/
If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the level of service
provided.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Report of projects across cost centers and vice versa

Similar Messages

Maybe you are looking for