Report of stock in a Plant

Hi
I just wanted to enquire if there is anyway to get a list of all the material numbers, current stock quantity and value in a report?
I had a look MC.1 is it possible to get something like this with the material numbers and quantity of the stock?
Thanks
Vinesh

dear sir
you try with this report
S_P00_07000139- stock card and inventory material report.
In that you select the stock balance report-summary radio button.
It will show the total stock and total value.
Regards
jrp

Similar Messages

Report for stock transfer from plant to plant

Hi,
Is there any standard report for stock transfer from plant to plant .
If not is there any enhancements to get the above report.
Regards,
Ravindranath.

Hi Ravi,
U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
if u want the list of stock transport orders then use tcode ME2N and the input parameter as item category "U" and generate the report.
hope it wud have answered ur question
Reward if useful
Shawn

Report for stock for supplying plant

Hi Experts
Is it possible te extract report which going out material from one suppling plant to all plants. Is there any stantdard transaction.

hi
if u want movement type wise then u can use MB5B or MB52
regards
kunal
award if helpful
Edited by: kunal ingale on Nov 8, 2008 7:57 AM

Re: Report for Stock Movement

Hi All,
Can we get a report from SAP for the receipts and issues material wise for
any particular period - for a particular plant & overall?
Plant Part Code Description Opg Bal Receipts Issues/Sale
Closing stock
Best Regards
Siva

Dear,
MB5B--stock on posting date.
MB51--Material document list inthis report u can get desire result with help of m.type
Mc.2 stock analysys by plant
Mc.6---stock anylaysys by s.loc
Regards,
Gopala.S

Stock Overview per plant wise/Storage location wise

hi
is there any transaction or report to get Stock overview plantwise/ storagelocationwise ... except MMBE it gives particular material.. i want per particular plant or storage location total materials stock.
I want stock report similar to MMBE it gives available stock per single material in a palnt but my requirement to print available stock per all materials in a given material along with storagelocation wise/batch wise and total quantity.
Points guaranteed..
Message was edited by: Ashok Parupalli
Message was edited by: Ashok Parupalli

There's quite a lot you can do in Logistics Info Systems to report on stocks across multiple materials.
Other than that, it depends on what you really want to show - stock that's physically present (e.g. including vendor-owned consignment), stock that you own (e.g. including customer consignment or toll manufacturers' stocks); do you want to show quantities (doesn't usually make much sense for more than one material, of course, due to varying units of measure) or values, etc.
Some of these data are quite expensive to read from a runtime perspective, in particular the "special" stocks (e.g. consignment).
You also have to consider that stock you own but that's not physically present on site (e.g. customer consignment), or GR blocked stock, usually is not assigned to a storage location.
If you give me some more info about what you're actually trying to achieve, I may be able to help you better.

Reconciliation fo stock report at stock type level

Hi gurus,
I want to compare the stock quantities in a stock report with ECC when I drill down the report at Stock type level. I have tried to do it through MB5B but I found it not appropriate as the stock type calculation in BW as based on some LIS logic. also I found it is not always same as in MB5B.
Please suggest me how can I cpmpare the data at stock type in ECC.
thanks in advance
Regards,
Jitendra

Hi,
Use 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM to 0IC_C03 Cube and design the report.
Use :
0VALSTCKVAL   " for Value
0VALSTCKQTY   " for Qty
0CALMONTH        " for Month
Use the above combinations in New Selections in columns and go it.
For Qty Opening:
New Selection bad drag abd drop following things
0VALSTCKQTY   " for Qty
0CALMONTH        " for Month and restrict with less then or equalto option variable (single value, user input) and set the offeset
                               value = -1 bcoz if user will give 12.2009 , so it will display 11.2009 closing stock, this is opening for 12.2009.
For Qty Closing:
New Selection bad drag abd drop following things
0VALSTCKQTY   " for Qty
0CALMONTH        " for Month and restrict with less then or equalto option variable (single value, user input) .
In the same way build for Value and other Keyfigures on 0IC_C03.
And
Drag & drop
0MATERAIL
0PLANT " Give some Input Variable.
Reconcile BW Vs ECC MB5B
In ECC goto MB5B and give Material and Plant and Date Range corrctly , select radio button Valuated Stock an dexecute and check teh Opening/Closing Stock for that month.
Once you design your report like above then you can check in ECC in MB5B
See the steps.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
Thanks
Reddy

Considering stock in other plants' storage location

Hi all,
E.g. For 1 material I have stock in 2 plants A and B. Major consumption being in plant A (say 80%). So when I execute MD07 for this material with MRP controller for plant A (collective overview), in the 'plant stock' column I would like the stock to be sum of stock in plant A and plant B. Is it possilble ?
Regards,
Yogesh

Hi,
For that you can use MD48, but it is per material. If you want such feature for multiple materials, then you will have to build a custom report (for stocks refer to table MARD). As std SAP ECC does not have this feature.
Hope it clarifies.
Regards,
Vivek

Report for stock in transit datewise

I need stock in transit datewise. Is there any report possible for that ? Which table and fields should I refer. please revert.
Regs,
Appie

Hi,
T.Code: MB5T can be used for Report for stock in transit, but date wise u can't get here. U have to develop areport or by querry u can develop a report.
U can get date (MKPF-BUDAT) wise details by giving movement type in MSEG table u get all the details in the tables.
Regards,
Chinna

PR and PO should be display in IWBK report for stock item.

Hi Exterts,
Our client requirement is to display PR and PO number in IWBK report for stock item as well.
I know PR and PO can be display in IWBK report for non-stock item but how we can display PR and PO for stock item,as PR is generated through MRP for stock item.
Please share your ideas on this.
Regards
Vishu

Vishu,
In typical MRP settings you "procure to stock" not "procure to order".
This means that there is no direct link between the PM/CS orders and any PR/POs created via MRP.
Subsequently you will not be able to show this data in IWBK.
However, we are currently designing a customer-specific report similar to IWBK that also counts the number of open POs for a given material on a PM/CS work order. The user can then navigate to ME2M (PO list) or MD04 (stock requirements list) to get further details.
PeteA

Reg : Z report for Stock on given date

Dear ABAP Guru's,
 Iam in need of urgent report inorder to find Stock on given(particular) single date but not SAP standard report.That Stock Value should match the MC.9 value.Pls help me

Hi,
This code may help you.
*& Report ZDH_ITC_STOREP
REPORT ZDH_ITC_STOREP.
TABLES: T001L.
type-pools slis.
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: GT_HEADER TYPE SLIS_T_LISTHEADER.
DATA: GS_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: GT_EVENTS TYPE SLIS_T_EVENT.
TYPES: BEGIN OF TY_FINAL,
 MATNR TYPE MCHB-MATNR,
 MATDES TYPE MAKT-MAKTX,
 BATNO TYPE MCHB-CHARG,
 UMIL TYPE MCHB-CLABS,
 UCFC TYPE MCHB-CLABS,
 BMIL TYPE MCHB-CSPEM,
 BCFC TYPE MCHB-CLABS,
 TMIL TYPE MCHB-CLABS,
 TCFC TYPE MCHB-CLABS,
 END OF TY_FINAL.
TYPES: BEGIN OF TY_MCHB,
 MATNR TYPE MCHB-MATNR, " Material Number
 CHARG TYPE MCHB-CHARG, " Batch Number
 CLABS TYPE MCHB-CLABS, " Valuated Unrestricted-Use Stock
 CSPEM TYPE MCHB-CSPEM, " Blocked Stock
 UCFC TYPE MCHB-CLABS,
 bcfc TYPE MCHB-CLABS,
 END OF TY_MCHB.
*TYPES: BEGIN OF TY_MARA,
* MATNR TYPE MARA-MATNR,
* END OF TY_MARA.
TYPES: BEGIN OF TY_MAKT,
 MATNR TYPE MAKT-MATNR, " Material Number
 MAKTX TYPE MAKT-MAKTX, " MATERIAL DESCRIPTION
 END OF TY_MAKT.
TYPES:BEGIN OF TY_MARM,
 MATNR TYPE MARM-MATNR, "MATERIAL NUMBER
 UMREN TYPE MARM-UMREN, "Denominator for conversion to base units of measure
 UMREZ TYPE MARM-UMREZ, "Numerator for Conversion to Base Units of Measure
 END OF TY_MARM.
DATA: IT_FINAL TYPE STANDARD TABLE OF TY_FINAL,
 WA_FINAL TYPE TY_FINAL.
DATA: IT_MCHB TYPE STANDARD TABLE OF TY_MCHB,
 WA_MCHB TYPE TY_MCHB.
*DATA: IT_MARA TYPE STANDARD TABLE OF TY_MARA,
* WA_MARA TYPE TY_MARA.
DATA: IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
 WA_MAKT TYPE TY_MAKT.
DATA: IT_MARM TYPE STANDARD TABLE OF TY_MARM,
 WA_MARM TYPE TY_MARM.
data: atot, btot type MCHB-CLABS.
PARAMETERS: PA_FACT TYPE T001W-WERKS OBLIGATORY, "FACTORY
 PA_DATE TYPE SY-DATUM OBLIGATORY. "DATE
SELECT-OPTIONS: SO_STLO FOR T001L-LGORT OBLIGATORY. " STORAGE LOCATION
* GETTING THE MATERIALS
SELECT MATNR CHARG CLABS CSPEM
FROM MCHB
INTO TABLE IT_MCHB
WHERE WERKS = PA_FACT
AND LGORT IN SO_STLO.
* GETTING THE BRAND DESCRIPTION FROM THE ABOVE SELECTED MATERIAL
SELECT MATNR MAKTX
FROM MAKT
INTO TABLE IT_MAKT
FOR ALL ENTRIES IN IT_MCHB
WHERE MATNR = IT_MCHB-MATNR
AND SPRAS = 'EN'.
* GETTING THE BATCH CODE FOR THE ABOVE MATERIAL AND BRAND
SELECT MATNR UMREN UMREZ
FROM MARM
INTO TABLE IT_MARM
FOR ALL ENTRIES IN IT_MCHB
WHERE MATNR = IT_MCHB-MATNR.
* CALCULATING THE TOTALS OF BLOCKED AND UNRESTRICTED QTY
LOOP AT IT_MCHB INTO WA_MCHB.
READ TABLE IT_MARM INTO WA_MARM WITH KEY MATNR = WA_MCHB-MATNR.
WA_MCHB-ucfc = ( ( WA_MARM-UMREN / WA_MARM-umrez ) * wa_mchb-clabs ).
 WA_MCHB-bcfc = ( ( wa_marm-umren / wa_marm-umrez ) * wa_mchb-cspem ).
* WA_MCHB-ucfc = atot.
* WA_MCHB-bcfc = btot.
modify IT_MCHB from WA_MCHB TRANSPORTING ucfc bcfc WHERE MATNR = WA_MCHB-MATNR.
READ TABLE it_makt into wa_makt with key MATNR = WA_MCHB-matnr.
WA_FINAL-matnr = WA_MCHB-MATNR.
WA_FINAL-MATDES = wa_makt-maktx.
WA_FINAL-BATNO = wa_mchb-CHARG.
WA_FINAL-UMIL = wa_MCHB-CLABS.
wa_final-UCFC = WA_MCHB-ucfc.
wa_final-bcfc = WA_MCHB-bcfc.
wa_final-bmil = WA_MCHB-CSPEM.
WA_FINAL-tmil = WA_MCHB-clabs + WA_MCHB-CSPEM.
WA_FINAL-tcfc = WA_MCHB-ucfc + WA_MCHB-bcfc.
append wa_final to IT_FINAL.
ENDLOOP.
perform buildheader USING GT_HEADER[].
PERFORM FIELDCATINIT USING GT_FIELDCAT[].
perform alvdisplay.
PERFORM build_layout USING GS_LAYOUT.
*& Form buildheader
* text
* --> p1 text
* <-- p2 text
FORM buildheader USING RT_HEADER TYPE SLIS_T_LISTHEADER..
DATA: TP TYPE SLIS_LISTHEADER.
DATA: TEXT(20) TYPE C,
 DT TYPE SY-DATUM.
TP-TYP = 'H'.
TP-INFO = 'STOCK REPORT '.
APPEND TP TO RT_HEADER.
CLEAR TP.
WRITE SY-DATUM TO DT DD/MM/YYYY.
CONCATENATE 'DATE :' DT INTO TEXT.
TP-TYP = 'S'.
TP-INFO = TEXT.
APPEND TP TO RT_HEADER.
CLEAR TP.
ENDFORM. " buildheader
*& Form alvdisplay
* text
* --> p1 text
* <-- p2 text
FORM alvdisplay .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = 'ZDH_ITC_STOREP'
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
 IS_LAYOUT = GS_LAYOUT
 IT_FIELDCAT = GT_FIELDCAT[]
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
 T_OUTTAB = IT_FINAL
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " alvdisplay
*& Form FIELDCATINIT
* text
* --> p1 text
* <-- p2 text
FORM FIELDCATINIT USING FINIT TYPE SLIS_T_FIELDCAT_ALV.
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
LS_FIELDCAT-FIELDNAME = 'MATNR'.
LS_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
LS_FIELDCAT-KEY = 'X'.
LS_FIELDCAT-JUST = 'L'.
APPEND LS_FIELDCAT TO FINIT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MATDES'.
LS_FIELDCAT-SELTEXT_L = 'BRAND'.
LS_FIELDCAT-KEY = 'X'.
LS_FIELDCAT-JUST = 'L'.
APPEND LS_FIELDCAT TO FINIT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'BATNO'.
LS_FIELDCAT-SELTEXT_L = 'BATCH NO'.
APPEND LS_FIELDCAT TO FINIT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'UMIL'.
LS_FIELDCAT-SELTEXT_L = 'RESTRICTED'.
APPEND LS_FIELDCAT TO FINIT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'UCFC'.
LS_FIELDCAT-SELTEXT_L = 'UCFC'.
APPEND LS_FIELDCAT TO FINIT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'BMIL'.
LS_FIELDCAT-SELTEXT_L = 'BLOCKED'.
APPEND LS_FIELDCAT TO FINIT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'BCFC'.
LS_FIELDCAT-SELTEXT_L = 'BCFC'.
APPEND LS_FIELDCAT TO FINIT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'TMIL'.
LS_FIELDCAT-SELTEXT_L = 'TOTAL MIL'.
APPEND LS_FIELDCAT TO FINIT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'TCFC'.
LS_FIELDCAT-SELTEXT_L = 'TCFC'.
APPEND LS_FIELDCAT TO FINIT.
CLEAR LS_FIELDCAT.
ENDFORM. " FIELDCATINIT
*& Form BUILDLAYOUT
* text
* -->P_GS_LAYOUT[] text
FORM BUILD_LAYOUT USING RS_LAYOUT TYPE SLIS_LAYOUT_ALV.
RS_LAYOUT-NO_INPUT = 'X'.
RS_LAYOUT-ZEBRA = 'X'.
RS_LAYOUT-COLWIDTH_OPTIMIZE = ' '.
RS_LAYOUT-NO_COLHEAD = ' '.
RS_LAYOUT-NO_VLINE = ' '.
RS_LAYOUT-INFO_FIELDNAME = 'WS_COLOR'.
ENDFORM.
 " BUILDLAYOUT
HTH
Regards,
Dhruv Shah

MULTI LEVEL REPORT FOR STOCK TRANSPORT PURCHASE ORDER

Hi,
I will have lot of stock transport purchase orders,like md4c transaction where we get multilevel report for sale order/production order,is there any report for stock transport purchase orders.its urgent kindly help

goto purchase order history tab
you can see all the details of PO-deluvery-GI, GR, imvoice. Click on delivery, you can see the billing document throughdocument flow button.
This function is not availilable for production order, hence we have MD4c.

Inventory report for stock category B

Hi everyone,
We are trying to generate a customer stock inventory report with stock category B. The table MARD is not displaying any values annwe also looked at table MKOL. Its not giving us any. How do i get the inventory report for this stock type B. Kindly Advise.

it is customer owned stock. We receiver materials from customer for repair and we recondition them and we give it back. for this we maintain it in stock type B. it is specifically used in aerospace industries. We want to make an inventory report for this customer owned stock in our inventory . i am unable to get the table. Kindly advise

Report for stock value at Warehouselevel

Hi
I need to generate a report of stock value at the warehouse level.
please let me know the tables to be linked to get the report.
Thanks

Hi Nainar,
You can use MB52 and if you get the list you can use 'sum' icon to get the total value (on the selection screen you can set wether SAP should display values or not).
You can also use MB5L, MC.A transactions. If you want to check the stock only for one material you can check it in material master record on Accounting1.
BR
Csaba

Report where stock should be calculated after every movement

Hello
I need to create a report where stock should be calculated after every movement (after every document)
initial stock is 500
                quantity     on going stock
Doc 1         +100               600                          = 500 + 100
Doc 2         - 200               400                          = 500 + 100 - 200
The non cumulative KF doesnt help in this case. What would you recommend to use?

create an DSO having time stamp as part of key and two key figures outgoing and incoming. This should provide you all the movement history.
Hope it helps
Vikash

T-code for report of stocks

Hi Guru's
Wat is the t-code to find out the report of stock in FI view like MC.9.
Thanks in advance
rgds

Hi Rajesh,
Thanks for reply ,but i want the t-code from FI point of view,i want to compare the stock with that of mc.9 stock
rgds

Report of stock in a Plant

Similar Messages

Maybe you are looking for