Report on Opportunity Close Date Changes

I would like to create a report showing all deals that have had changes made to the Close Date. I am trying to create it from the Pipeline History section of the Analytics, but I am not sure which fields I can use, if any.
Any suggestions?

That is a very creative solution, Dale. I do have a couple of "what ifs" for you.
What if the Close Date is 10/30/2007... I change this to 10/15/2007 - a change of -15 days. Then I realize that I meant to change it to 11/15/2007 and changed it again. Would this create a problem for the report since the change amount would now show a 30-day change when it is really a 15-day change?
Another scenario has the date change twice in one week, between times that the report is run. The original date of 10/30/07 changes to 11/15/07 and then the next day changes to 12/15/07. How does this affect the report?
When we get to the point that the audit trail becomes reportable, this problem is solved. Until then, it is quite the puzzle. I think your solution potentially solves part of the problem, but depending on how much that date field actually changes and how often you run your report and which fields are needed in that report, it could return misleading data as well.
This is a very interesting problem. Dale has come closest to a solution so far. Any other suggestions for DavidG? I am drawing a blank on it so far.

Similar Messages

  • Report on Opportunity Close date forecast Quarters

    Hi,
    we have created a custom report with fields from the Forecast section in Reporting including the Opportunity close date, and under the 'Close Date' we have put the Fiscal Quarter. However it is coming out wrong in some cases, so i added the 'Date' under the Close date section and not the opportunity section and it is different to the Close date on the opportunity. Can someone tell me what this 'Date' refers to?
    Thank you

    That is a very creative solution, Dale. I do have a couple of "what ifs" for you.
    What if the Close Date is 10/30/2007... I change this to 10/15/2007 - a change of -15 days. Then I realize that I meant to change it to 11/15/2007 and changed it again. Would this create a problem for the report since the change amount would now show a 30-day change when it is really a 15-day change?
    Another scenario has the date change twice in one week, between times that the report is run. The original date of 10/30/07 changes to 11/15/07 and then the next day changes to 12/15/07. How does this affect the report?
    When we get to the point that the audit trail becomes reportable, this problem is solved. Until then, it is quite the puzzle. I think your solution potentially solves part of the problem, but depending on how much that date field actually changes and how often you run your report and which fields are needed in that report, it could return misleading data as well.
    This is a very interesting problem. Dale has come closest to a solution so far. Any other suggestions for DavidG? I am drawing a blank on it so far.

  • Updating product revenue close date based off opportunity close date

    We do not use the product revenue close date, only the opportunity close date. We need to get the fiscal month of the opportunity close date but we have several reports the need to use the opportunity product history area and that does not contain the fiscal month for the opportunity. If we did a combined report, we cannot offer the user any prompts.
    Does anyone know how to get the opportunity close date fiscal month from the opportunity products area? Is there a way to update the product revenue close date when the opportunity close date it updated?
    Thanks

    Hi David,
    In the universe you describe you have the opportunity 'Close Date'. Use a 'case-when' expression to create the 'Fiscal Month' you need.
    Other than that you can use the JoinFieldValue function in the application to retrieve the opty close date, but that will require you to update product revenue for it to trigger which probably won't work for you.
    Good luck.

  • Validating Opportunity close date

    I was requested to create a validation for Opt. Close Date - Something like: If changed from the previous value it should be in the same quarter. Other than that it would be invalid.
    I still trying but started using PRE(JulianQtr([<CloseDate>])) and do get syntax error about invalid name in expression... I suppose I should use PRE('<xxxxxx>') - so that means I cannot use PRE(JulianQtr.... ?
    I'd appreciate any help.
    Txs.
    Antonio

    Hello,
    I am trying to validate the Opt. Close Date using:
    (JulianQtr[<CloseDate>] - JulianQtr(PRE('<CloseDate>'))) <> 0
    (JulianQtr[<CloseDate>] - 1 < JulianQtr(PRE('<CloseDate>')))
    Both expressions are ok in the syntax checker but during opt field validation there is an error message about CSSString does not support '-'
    So it seeems that somehow JulianQtr is returning a string value that cannot be used in expressions.
    Pls. I'd appreciate any help.
    Txs.
    Antonio

  • Vendor master data changes

    Hi all,
    Please help me with some useful information regarding the history of master data creationa and changes. I need to create a query for creation and changes of vendor master data. Data for creation of the vendor master data are saved in LFA1 but for changes I cannot find table.
    Thank you,
    Desimira

    Hi,
    You can use the standard report for Vendor master data changes, S_ALR_87012089 - Display Changes to Vendors.
    Regards,
    SAPFICO

  • How to schedule the webi report based on data changes in the report data

    Hello,
    I want  to schedule a webi report based on data change in a column in the report.
    The scenario is something like below:
    1. If a data of a particular column changes from 2 to 3 than I would like to schedule this report and sent it to users mail box.
    I know how to apply alerts or schedule a report or data tracking for capturing changes in the report but I dont know how to schedule the report only for data changes.
    Anybody done this before.
    Thanks
    Gaurav

    Hi,
    May be these links can help you:
    http://devnet.magicsoftware.com/en/library?book=en/iBOLT/&page=SAP_R_3_Master_Data_Distribution_Defining_Change_Pointers.htm
    SEM-BCS: Load from data stream schedule
    Attribute Change Run

  • Vendor master data change confirmation -Report Y_CD1_39000398

    Hello All,
    In report  Y_CD1_39000398 we can see the confirmation pending for the Vendor master data changs. There are some entries which are pending since last 5 years becasue the chagnes are rejected. Is there is any possibility to remove this so that in this report we can get only relevant entries
    Thanks  & regards,
    Prashant

    Hi,
    I dont think it is the standard report. I think its a developed one as it is starting with Y. If so, then co-ordinate with your abaper and do the necessary changes to get the right result.

  • Report to display material master data changes

    Hi,
    Is there a standard report available to display all changes to material master data over a specified time frame i.e all changes made alst week,all chnages made today.
    Please suggest.
    Thanks in advance.

    Hi!
    Appart from MM04, you can also have a look at MM03 or MM02:
    1. Goto MM02 or MM03 transactions and enter the material.
    2. Select the relevant views for which you want to have the details.
         In the Bar menu follow the path Environment -> Display changes.
    Here you will get the list of changes done to the fields with Old and
    New values.
    Appart from these two tools, there is not any other report provided in the standard for this target.
    I hope this helps!
    Esther.

  • Report to bring CATS Time data changes

    Hi,
    I need a report to bring CATS Time data changes during a certain month.
    Is there any report that does this?
    And is there any idoc that is populated with this information and a report to create it?
    Or for example a function that returns this information.
    Thanks.
    Sónia

    HI Sonia,
    Try to use the bapi: BAPI_CATIMESHEETRECORD_GETLIST
    Regards,
    ravi

  • Report for basic dates change in maintenance order

    Dear friends,
    Client requirement is to see the orders for which basic dates have been changed. The scenario is when preventive maintenance is done , if the work cannot be done on the date(basic date in maintenanc eorder), the basic date is changed for a convenient time. They want to have a report showing all the ordres for which the basic dates have been changed and the changed dates detail( ie. initial basic date, changed basic dates).
    best regds
    Arun

    Once you get the Change Document header data from CDHDR you will then need to get the change details from CDPOS.
    Have a look at program RSSCD200 via TCode SE38.
    There may well be a suitable function module for this...
    PeteA

  • Order Reporting by Create and/or change date

    Hi all,
    is it possible using business content to report orders based on the date that they were created -OR- changed/canceled (if they were).  My understanding is that BC reports orders by original CREATE date only.
    Any links or documents_?

    any documents on best practices for this for order reporting and open order reporting...i want to make sure that the deltas reflect the "truth" as the business sees it here
    Calday     Created on Date      Changed on Date      Planned Ship Date     Qty      Sales Rep     Doc Type     Change Flag
    1/1/2007     1/1/2007     #     1/9/2007     10      Bob     O     #
    1/4/2007     1/1/2007     #     1/9/2007     (10)     Bob     O     #
    1/4/2007     1/1/2007     1/4/2007     1/9/2007     10      Joe     O     C
    1/6/2007     1/1/2007     1/4/2007     1/9/2007     (10)     Joe     O     C
    1/6/2007     1/1/2007     1/6/2007     1/9/2007     7      Joe     O     C
    1/9/2007     1/1/2007     1/6/2007     1/9/2007     (7)     Joe     O     C
    1/9/2007     1/1/2007     1/7/2007     1/11/2007     7      Joe     O     C

  • The information of photo like date change after close it. How can'i correct that

    the information of photo like date change after close it. How can'i correct that?

    Using the Photos ➙ Batch Change ➙ Date menu option will let you change the EXIF Capture Date of the photo.
    For a single photo (or to set a group of photos to the same date and time) use the Photos ➙ Adjust Date and Time ... menu option.
    Happy New Year

  • Conitional formattimg on group data change access report

    I want to do apply a conditional format on an access report when data changes from one group to another.
    So on the on format property of the report, the ordinary conditional method would be something like:
    if [SomeField]=SomeValue then
     do action A
    elseif [SomeField]=SomeValue2 then
     do action B
    else
     do action C
    end if
    what I want to do is:
    If somefield changes data from one thing to another (ie the data in the field changes value at some point, without knowing what those values are)
    do action A
    end if
    Thanks

    Hi
    Please have a look at the wiki Troubleshooting Issues with VS .NET Datasets and Crystal Reports.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • While preparing an AUDIT - (Data changes report) faces an 'Server error' message

    Hi BPC Experts,
    While preparing an AUDIT report- (Data changes report) faces an 'Server error' message.
    But regular users are able to input their data in EPM.
    What could be the reason for this message?
    Regards,
    Rajesh.

    Hi Chuan,
    Attached the Error message here. We use BPC NW10
    Rajesh.

  • Import Opportunity Partners data reporting non-primary contact relationship

    I currently have three contacts related to each opportunity, but only the primary can be reported in OnDemand. It looks to me like I can use Opportunity Partners to accomplish the reporting of contacts related to the opportunities by linking the contacts in the opportunity partner area.
    Anyone have experience with this problem and/or this solution?
    My other problem is that Oracle says that Opportunity Partner data can not be imported, but I am guessing that someone knows how to do that in some way. maybe using web services??
    thanks

    Hi Mike,
    You may want to try posting your question regarding CRM On Demand's reporting capabilities to the Analytics forum: CRM On Demand Analytics and Reports
    Regarding your second question, WS can be used to associate Partner records as well as Contact records to an Opportunity.
    Thanks,
    Sean

Maybe you are looking for