Report Painter Address

Hi guys,
I'm making a report on the report where the user will choose the company code, a period and a fiscal year. And it'll show the totals by some accounts.
The problem is that i need to print on the header the address of the chosen company code, but i can't find a way to access the address if you guys could help it would be much appreciated.
Thanks for the help.

I was think that maybe there is some kind of variable juggling that i could do to get this value, but i'm out of ideas...
You guys are really my last hope...
edit -
Another thing is there a way to change the characteristics that are show in the extras -> report texts -> header ? Maybe in this way i can get the address...
Edited by: korbeen on Jul 27, 2011 9:45 PM

Similar Messages

Getting Error in Report painter

Dear All ,
i am getting an error after i execute a report in report painter,
Getting the following errors,
Characteristic Ledger does not exist
Characteristic Record Type does not exist
Characteristic Ledger does not exist
Message no. GR655
Diagnosis
The characteristic must (message type E) or should (message type W) be addressed in the report definition. This means that a set must/should exist for the characteristic in the definition of the report rows, report columns, or report selection.
For performance reasons, it is important that you limit the value ranges of those key fields located at the start of the database key as much as possible.
Procedure
Define a set for this characteristic in the report.
Note
In Controlling (Table CCSS), different characteristics (cost center, order, project, etc.) are portrayed internally with a common technical characteristic, "Object". In reports, either a specific characteristic such as cost center must be used, or the characteristic "Object" must be used directly. If this is not the case, an error message appears saying that the "Object" characteristic is missing.
regards
Man

Hi,
define a ledger / record type, (eg in the general data selection).
Best regards, Christian

Logical Formulae in Report Painter

Hi,
How do we insert a logical formula in a report painter.
For instance, "IF-THEN-ELSE".
Your early replies would be appreciated..

You would create a formula column in reports or formula variables to use in columns.
More details on link's below:
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22c6243c611d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22ea043c611d182b30000e829fbfe/frameset.htm
Best Regards,
Daniel Scoz.

Error in generating a report group in Report Painter

Hi,
I created a report in SAP report painter using transaction code GRR2. I attached the report to an existing group ( 15 reports already in the group), when I generate the group in transaction code GR55 thereu2019s an error message u201CSyntax error in GP40V42F6QG4OQVI4Q93F6FE3QK500, row 97,644 (-> long text)u201D. Please help me on this error.
Thanks,
Louie

There's no error when I generate the same report in a new created group as well as when I generate the existting report group without the new created report.
Information on where terminated
    The termination occurred in the ABAP program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
     in "FILL_RANGES_FROM_SET".
    The main program was "GP40V42ERDE7HBU91TXFAHVA6B0500 ".
    The termination occurred in line 92457 of the source code of the (Include)
     program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
    of the source code of program "GP40V42F6QG4OQVI4Q93F6FE3QK500" (when calling
     the editor 924570).
Louie

Creation of report with the help of report painter

Dear Experts,
I need report painter material, if any body have pls farward to me.
my intension to create controlling report with the help of report painter.
I am ready to award full points.
Thanks in advance
Regards
avudaiappan
Moderator - Please read this:
/thread/931177 [original link is broken]
Thread locked

Hello Chinasammy,
Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
Advantages of Report Painter include:
Flexible and simple report definition
Report definition without using sets
Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
=============================================
Below mentioned is the process for creating reports using Report Painter as a tool.
Selecting and maintaining a library for your report: As the transfer structure to Report Painter you use a report table, which is defaulted by SAP and can not be maintained. This table contains characteristics, key figures and predefined columns. In a library, you collect the characteristics, key figures, and predefined columns from the report table, which you need for your Report Painter reports.
When you define a Report Painter report, you assign it to a library. Reports assigned to one library can only use the characteristics, key figures, and predefined columns selected for that library.
When you create or maintain a library, the Position field determines the sequence in which the characteristics, key figures or (predefined) key figures appear in the Report Painter selection lists when you define a report. This allows you to position the objects that you use regularly in your reports at the beginning of the selection lists. If you do not make an entry in the Position field, you will not be able to use this object in Report Painter reports.
You can use either the standard SAP libraries for your reports or define your own.
(ii) Selecting or maintaining a standard layout for your report: Standard layouts determine report layout features and the format of your report data.If the SAP standard layouts do not meet your reporting requirements, you can create a new standard layout or change an existing one.
(iii) Defining row and column models: A model is a one-dimensional, predefined reporting structure that you can insert in either the rows or columns of your report.If you often use the same or similar row or column definitions in your reports, it is recommended that you create row or column models.
You must define the row and/or column models that you want to include in your report definition before you define the report.
You can also use the standard column models supplied by SAP.
(iv) Defining the report: Defining a Report Painter report involves the following steps.
(a) Define the report columns: You define the report columns using the characteristics, key figures, and predefined columns selected for the library that the report uses. Alternatively, you can use a column model for column definition. Column models are predefined column structures which you insert into your entire column definition, instead of defining each individual column.
(b) Define the report rows: You define the report rows using the characteristics selected for the library selected for the report.
Alternatively, you can use a row model for your row definition. Row models serve the same purpose as column models, but are used to define a report row.
Edit and format the report rows and columns in line with your requirements. (For example, you can hide rows or columns, define the column width or define colors for your report rows).
(iii)Define general data selection criteria for the selection of your report data: Selection criteria are the characteristics used to select data for the entire report. You cannot enter characteristics as data selection criteria if they are already being used in the report rows or columns.
(iv) Assigning the report to a report group: Once you have defined a report, you must assign it to a report group. A report group can contain one or more reports from the same library. However, reports that share the same data will select data more quickly and improve processing time.
Hopw this helps you. Please let me know if you need anything more and assign points.
Rgds
Manish

Changing header in report painter

Hi All,
I have a requirement to change the header(column). I am using the global variable &5PY(Period/Year) in the characterictics value. So it displays an output like 06.2008. But the client needs this to be displayed as June 2008.
Kindly help me out with this.
Regards,
Karthik

In report painter you can select variouselements based on which the data will be pulled. I haven't seen any report painter with two header lines and don't think report painter allows that. But for your requirement I believe you can select the periods in the header line itself.

Add element in Report Painter

Hi All,
I am trying a add an element (to the individual/lowest level) in my existing report in 'GRR2'.
If I do not explode, element is created as below image,
If I explode, element is shifted to final level as below image,
But I want the element to be present at the lowest level as below,
* 1990
Note: The test '1990' will be replaced with the actual account name...
Expert advice is appreciated...
Thanks
Rajesh P

hi
Report painter
the below Pdf should help you
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://help.sap.com/erp2005_ehp_03/helpdata/EN/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/eb/1377e443c411d1896f0000e8322d00/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
nagesh

Planned values in report painter

Hello,
Does anybody knows if it is possible to extract planned values (planned through transaction code FSE5N) into a report built through report painter tool?
My report is comming out with "0" values even though I have selected plan version and Plan/Act. indicator.
Appreciate any help!
Paula Rocha

Hi Stacey.
I have just tried, and no changes... Still have "0" values...

Index Currency in Report Painter

Hi,
Is there any way I could include the Index Currency as a key figure for my Report Painter reports?

Hi,
Before running the repport go to envoriment / option and expert mode.
Now you get extra buttons select currency translation. Here you can select what you want. You can create variant from this
Paul

Lead Columns in Report Painter

Hi All
Is it possible to have two lead columns in a report? My requirement is that i want to prepare a profit and loss account by using report painter. It should look like
Expense           Amount           Revenue          Amount
Exp G/L A/c       XXX             Sale G/L A/c      XXX          (For Example)
Now i want to define Expense column as lead column and revenue column as a lead column
Kindly help me with issue
Regards
Invin

Hi Abhijit
Kindly elaborate it I am new to report painter i would like to tell you again what is my specific design requirement
LEAD Column                Column 1                              LEAD Column                    Column 2
Expense                      Amount                                     Revenue                      Amount
(These four will be my columns under this following will be )
Salary Exp G/L       1000                                 Sale G/L A/c       2000 (For Example)
(This salary will be my heading and i will be typing in words and under this i will be assigning my salary Gl A/c same will be the case with Sale)
Now i want to define Expense column as lead column and revenue column as a lead column so that i can write Salary as heading and sales as heading just like traditional Profit and loss account what earlier we use to prepare by hand.
Kindly elaborate it how to do it
Regards
Invin
Edited by: sapcofi on Oct 6, 2009 1:37 PM

Dynamic Rows in Report Painter

Hello everyone,
I'm new to report painter and m using the SAP Library help material to understand report painter. I've one query though i.e
Is it possible to create a report hrough report painter with dynamic rows ? if yes then pls let me know how.
Regards
Anik

Thank you.
See I have the below Rows
Total Revenue
Cost2
Cost3
Direct Cost
Gross = Total revenue - Direct Cost
Gross % = (Gross/Total revenue ) * 100
I have Columns as with basic Key figures and Formulas
Year(basic key Figure)
Year+1(basic key Figure)
Total = Year + (Year+1)
Its giving me correct values in case of Basic Key figures and not in the formula case.
It giving error when there is formula both in Row and Column.
In the above case last row and last colum. Only Column formula is getting implemented.
Here for example I have mentioned 4 rows and 4 columns.. But I have 15 Rows and 30 columns .. out of which 15 rows and columns have formulas...
% Rows are problem.. which gives me errors... I tried using Special cells, but I am not 100% sure how to use them.
I would be very thankful if you can help me out.. Please

Strange discrepancy in report painter

Hi everyone,
I've designed a report painter with all the respective columns & formulas intact but at the Grand Total col (summation of all the sub-totals), the figure doesn't tally with all the sub-totals. All sub-totals have been added correctly but when they are added up to the Grand Total, the fig doesn't tie.
Any clues? Have I missed out something?

Hi Andrew,
I've checked the sub-totals and apparently, when i double click on a sub-total to drill down to line item lvl, the fig doesn't seem to tie in with what I see in the report painter report. It's real strange that the correct fig appears upon drilling down to line item level but at a higher level, the fig isn't right. It's short of a fig which is in relation to another column.
I've double checked the formula at the sub-total col and all the cols in the formula are present. This is the bizarre thing which I've been trying to resolve for the past few days.
Best Regards,
Ethan

Library Tables in Report Painter ?

Hello,
can we use two tables while creating a library for the report painter ? mmy guess is on using a view ??
If views, then how to use them in the libray while defining the characteristics n all ??
Hope i am comprehendable ..
Thanks.
Shehryar

Hi ,
i seen the same issue in sapgenie.com , just have a look .
as per my knowledge u can use Views in report painter.
regards
Prabhu

Change Table in Report Painter

Hi Experts,
I have some Report Painter reports assigned to a Library. I would like to change the table. Is there a a way to change the table without re-writing the reports? I can add a new table, but do not know how to remove the existing table without affecting the report. Does any one have an idea? Please advice.
Thanks
Kingsley

Hi,
I would like to change the assignment of the form.
Yet it is assigned to a standard report and I would like to assign it to a report I have created.
Ronan

Alternative Periods in Report Painter

I'm trying to create a report painter report for labour efficiency, it compares actual labour confirmations to a statistical key figure for payroll hours.
I have the basic elements, but my problem is this. We currently run our accounts on a calendar month basis, so we have 12 periods in FI. This report is required on a weekly basis for each weeks payroll. Is it possibly to report totals for a given week, when that is not your accounting period?
I can't see any obvious characterisics that will give me a weekly total of each figure, but I'm wondering if it os possible to define alternative periods (e.g. 52/53 week years ending each sunday for a period, and bring that in as a row characteristic).
Has anybody managed to achieve anything like this, and if so how?
Postings can occur anytime in the week, so I don't think posting date is an option, but may be if you can specify ranges that can be logically extrapelated in the report (i.e. Mon-Sun).
Thanks for any advice on this
Graham

Has anybody got any comments or advice on this?
Graham

Report Painter Address

Similar Messages

Maybe you are looking for