Report painter  and drill down reports

Hi SAP gurus,
               Can any froward configuration of  report painter  and drill down reports.
   iassign points

Hiii Sai Krishna,
can u forward the same documentation to me..plsss
my mail id - [email protected]
thanks in advance
regards
ramki

Similar Messages

  • What is the difference in Interactive reports and Drill down reports?

    What is the difference in Interactive reports and Drill down reports? Are they same?

    Hi FRD ,
    Both are same .
    as far as i know there is no difference .
    bye .

  • Inconsistency in upper level report and drill down report

    I have to reports:
    1) Higher level report pulls data against customers and shows aggregated data for all promotions for that customer from a table A.
    2) Lower level report pulls data from the same table A, but for all promotions against a customer after i drill down on a Customer.
    However, the values of a measure when summed up for a customer in the higher and lower level reports, does not match sometimes. Sometimes its in sync, sometimes its not.
    My Oracle BI servers are 2 in no. with clustered configuration. Can this be an issue related to caching of measure values? If not, please give me pointers in other directions i can look.

    clustering is not a problem here....just check for some example...and do some unit testing to find the rootcause of mismatch..it might be including some some extra values..

  • Reports 3.0 - Drill Down Reports over the Web

    Can anyone tell me how to code a button to run a drilldown
    report over the Web ?
    I have read about bookmarks, hyperlinks and hypertext and found
    the on-line documentation to be rather unclear.
    Thanks
    null

    Magoo is talking about a patch 23, and you are on 11. Maybe that's the difference?
    You can also try to upgrade just the Oracle 8 client (I assume Developer 2000 uses the 8 client). We did that to resolve some issues for Developer 6i on a 9i database.
    You need to get Oracle8 8.0.6.3.8 patch.

  • Customized drill-down report cannot go to line item level (FGI4 and FGI1)

    Hi Expert,
    I created a customized drill-down report using New GL features, as follows:
    FGI4 create form, with reference to form: 0SAPBLNCE-01
    FGI1 create report for the form created.
    After that I set some things like characteristic, variables, and output type.
    When I execute the report, the data shown cannot be drill-down to line item level:
    Goto > Line Item (this function is disabled).
    Kindly advise why I cannot goto line item level, where I copy from standard form: 0SAPBLNCE-01, which ha sthe features of drill-down to line item level.
    Thanks
    sbmel

    Hi sbmel,
    For calling up a line item report in a drill down report you need to make the below settins:-
    - You first have to generate the line item report with program RGRGENSI for your summary table.
    - Then assign the generated line item report to the summary report.
               Assiging the report is part of the 'Change drilldown report' function, which you reach by activating the characteristic selection field and then Extras -> Report assignment.
                In the dialog box that appears, choose the 'Other report type' function and insert the line item report generated earlier, as an ABAP report
    Regards,
    Gaurav
    Edited by: gka2707 on Jul 19, 2010 8:07 AM

  • Difference between Drill down Report and Interactive Report

    What is the difference between Drill down Report and Interactive Report?

    Hi,
        Drill down report and Interactive report seems to be acts as same. But there is a minor difference between those two.
    Drill Down Report  - When you  click on a particular field in a report it drills down to the next report, it won't trigger another screen.
    Interactive Report -  When you click on a particular field in a report it will trigger another report based on the field clicked. It opens another session internally in the same screen.
    Regards,
      Jayaram...

  • Drill Down Report to Summary Report Page Navigation

    Hi,
    I need technical input.
    I have 1 summary report, which is having two columns i.e. Name, ID.Name having hyperlink which navigates to drill down level report.
    How to go back from drill down level report to summary report.
    Note : Using IE back button it is not full filling becz whenver user navigates the data in drill down reports
    Example : In drill down report i have 200 records where i have traverese to 175 records.Where i have clicked 6 times next level page button, In this scenario where user click on the IE back button it not takes back to summary report rather than it traverse back 150 records.
    Thanks in advances
    Regards,
    Murali

    After creating the hyperlink in your ORACLE report you have to do the following
    Here are the instructions
    1. Open Adobe Reader 8.0 (not sure if earlier versions have an internet option.)
    2. Click edit
    3. Click Preferences
    4. Click Internet
    5. Remove check mark for Display PDF in browser
    6. Click ok
    7. Close Adobe Reader
    8. Run your UI
    9. Generate a PDF report
    10. A pop-up window will appear. Check remember and then click ALLOW
    11. Enter username and password (this needs to be done only once to initialize the connection between Adobe and Oracle login app)
    Good luck
    Carroll

  • Drill down report on Report Server

    How to run a drill-down report on Oracle report Server?
    The drill-down report works fine in Client Server. When the same report is tried on Web (Run a reoprt on Web using Oracle Report Server - Oracle Report 6i) it do't work.
    The problem is:
    1)The drill-down button doe't appear as button. It appears as text.
    2)How to pass the parameter from the main report to the drill-down report.
    For Ex. When you click on SS_No on the main report the drill-down report runs to show the salary, 401K deterction etc., for that particular employee.
    Thanks

    I dont understand if you are working in Client server or web
    but...
    If you are running in C/S you can use the host command from
    reports.
    If you are running reports on the web then you should also run
    forms on the web and then you can use the Forms servlet or cgi
    implementation to have a URL that activates the form, or just
    call a static HTML form that activates the form on the web.
    If your report is on the web and your form is C/S then
    As far as I know HTML cannot activate program on the computer
    that views it.

  • Drill Down Report in screen painter

    Hi Experts,
    I have a requirement in dialog programming/screen painter to create a 2 level drill down report. for eac page of the report, it should only contain 10 entries then to view the other entries (11 and up), the button for next page should be click (there is also back button).
    First question is how will I have the drill down report (alv list type?) in screen painter?
    Second question is how should I process the logic mentioned above (next and back) in screen painter/dialog programming?
    Thanks in advance for all teh support. Points will be rewarded.
    Cheers,
    Kurtt

    Hai,
    Go thru this Threads u ll get an idea,
    Drill down report help
    Re: regarding Drill Down Reporting
    drill down capabilities for an alv grid display field using oops concept
    Regards,
    Padmam.

  • REPORT PAINTER DRILL DOWN REPORT

    Hi,
    i need to develop report painter report with drill down for cost elments and month wise
    out should be cost elements and all months
    Please suggest how to use drill down
    Thanks and Regards
      RAVi

    Along these same lines. I have a user that cannot drill down into a drill down report. Let me clarify. This  report does have drill down capability as some people can drill down into it but others cannot. If a user has authorization to run a report via GRR3. When they click on an item to drill down they do not get an authorization error statement, all they get is a statment that says "list contains no data". Any ideas why some can drill down and some can't? Thanks
    Mark

  • Drill Down Report through Report Painter

    Dear All
    I am looking solution for Drill Down Reporting through Report Painter.
    Kindly Help me for the same.
    Thanks in Advance
    Alok

    Hi Alok,
    All the report writer reports and report painter reports will have the ability of drill down. You can create a report using  T Code GRR1 and GR31. Create a report group T Code GR51 and assign the report to the report group. Generate the report group using T code GR55. One the report is executed double clik on any line item, the system will take you to the drill down options.
    Regards
    Sridhar

  • Report Painter - cannot hide an element selected for the drill-down report

    Dear Experts
    I am using report painter to modify a report by trying to hide a row but getting the following error.
    You cannot hide an element that you selected for the drill-down list
    Message no. K7186
    Diagnosis
    You cannot hide elements that have already been selected for the drill-d
    System Response
    The function was canceled.
    Procedure
    Deselect the relevant row or column from the drill-down list.
    It says to deselect the relevant row from the drill-down list, but not able to find out how do i do it.
    kindly please help me to solve it
    thanks in advance
    Suresh

    Hi,
    If you are asking me whether i am trying to hide the row in the report painter form or in the output of the report, then, yes i am trying it in the report painter.
    I copied this standard form  '0SAPRATIO-01' for Cash Flow statements-Indirect method(tcode FSI5) and trying to modify the copied one. I tried to hide an existing row but it gave me the above message.
    any help?
    Suresh
    Edited by: rasuresh on Aug 10, 2010 12:44 PM

  • Drill down reporting through report painter...????

    hi  all ,
         I am generating a P & L report  from report painter .....
    I wish to have a drilll down option on items in rows 
    for eg if  i click on income i should be able to see all  the items of income ....
      can this be done how...????
    otherwise
    i shall have  show all the items  in the report
    the other thing is that can i give  a company logo in the report generated by report painter...
    please help as it is urgent
    thanks in advance..
    Nidhi
    pts assured

    Hi Nidhi,
    couls you give me a material on drill down reporting?

  • Drill Down Report using Crystal reports in eclipse and jspviewer

    Hi
    I want to understand how to write a drill down report since I have a requirement for my project, so I tried to run the sample drill down.rpt that is available with Crystal Reports 2008 Complete Reference book by George Peck.
    I can see the results correctly( i.e. can drill down) in the preview tab . Since I am working inside the eclipse, the way I run the reports is first  "Create report viewer JSP" by right clicking the report and have a url mapping to this jsp. I am running the reports from a hyperlink that maps to the url which will launch the jsp.
    the jsp is:-
    <%@ page contentType="text/html; charset=UTF-8" pageEncoding="ISO-8859-1" %><%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer" %><crviewer:viewer reportSourceType="reportingComponent" viewerName="Drill Down-viewer" reportSourceVar="Drill Down" isOwnPage="true" allowDrillDown="true">
         <crviewer:report reportName="reports/Drill Down.rpt" />
    </crviewer:viewer>
    The one that was created by  "Create report viewer JSP" did not had "allowDrillDown" attribute at all .But I added it since it isnt working.
    So when I launch my web app and click on the link to run the report, I get the report results but only to the summary level. When I double click the summary level I get a 404 error page.
    Can please anyone suggest what is going on.
    Thanks
    poonam

    Ok. So, you added the report to the project. Now we have to add the CR assemblies to the project, add the viewer (if need be) and fire it off. Simplest code would be:
    Public Sub New()
            ' This call is required by the designer.
            InitializeComponent()
            ' Add any initialization after the InitializeComponent() call.
            CrystalReportViewer1.ReportSource = ("path to report")
        End Sub
    In this case you are using the viewer SDK to runt he report. The report will prompt for any logon parameters - but you can code these also. You can load the report via the engine as bellow. Again, the report will prompt. I prefer to use the engine as it is way more "extensible"...
    Public Sub New()
            ' This call is required by the designer.
            InitializeComponent()
            ' Add any initialization after the InitializeComponent() call.
            Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
            crReportDocument.Load("path to report")
            'Bind the report to the viewer
            CrystalReportViewer1.ReportSource = crReportDocument
        End Sub
    If you have a report added to the project (strongly typed) the code would be:
    CrystalReportViewer1.ReportSource = New myReport()
    For more details, I'd recommend looking at the sample app vbnet_win_simplepreviewreport.zip available from the following location:
    https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
    The developer help files are here:
    [SAP Crystal Reports .NET SDK Developer Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip]
    [SAP Crystal Reports .NET API Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_api_2010_en.zip]
    - Ludek

  • Drill Down Reports and Drag & Drop capability Tool for Developer2000

    I am currently doing my development in Developer2000 rel. 2.0.
    I have seen many tools for VB which provide the facility for Drill Down reporting and drag & drop option in reporting, but unable to find any tool for developer2000. I wonder if anyone can guide me about any tool for developer2000 which can provide these facilities in reporting and forms.......
    Qamar Bilal

    you can use the mouse triggers to do drag and drop.
    you have mouse-move and mouse-enter etc...
    what do you mean by drill down?
    you can do drill down reporting in reports by using srw.run_report built in and you can also use oracle discoverer.

Maybe you are looking for

  • ITunes 11.4 The attempt to burn a disc failed. The disc drive didn't respond properly and can't recover or retry.

    27-inch, Late 2009 Processor 2.66 GHz Core i5 8 GB memory Software OS X 10.9.5 iTunes 11.4 Can not burn a playlist in iTunes 11.4 to a CD, upon completion of the burn operation get error message, "The attempt to burn a disc failed. The disc drive did

  • Transaction type for Account Determination

    This doubt in STO scenario: STO - between 2 plants - different company codes under same client Created STO from Receiving Plant in ME21N with document type NB Based on that STO, Created Delivery in VL10B from supplying Plant Tried PGI in VL02N from s

  • How to get *.class file path....

    how could find the executable file path at execution time.. if there is one *.class file, then i will paste it to another location . next i will execute that .class file. how to find that path from execution program ....

  • Procedure help (urgent)

    i AM NEW TO ORACLE I created this procedure PROCEDURE P_SUPLR IS SUPPLIER VARCHAR2(2000); cursor c1 is SELECT DISTINCT(M.SPLR)supplier FROM DM_MARKETING M WHERE M.SPLR IN ('ZEG','ZUS','USK'); BEGIN      for rec in c1 loop supplier := rec.supplier; en

  • Tracing of sql statements

    in the debug level normally we can trace the step by step. but how can we trace the sql statements.