Report Painter for all module
Hi,
Is report painter can be use by MM,PP,SD module ?
in ECC6, we can use report painter for module FI, how about module MM,SD and PP ?
if it can use for those module too, how is the step?
Hello Callia Raissa,
Yes report writer can be used in logistics also. One of the way which I am aware of is described below.
Flexible analyses allow you to can tailor the way in which key figures are combined and aggregated. This means that it is possible to both provide administrators with detailed information and management with aggregated information.
Flexible analyses enable easy access to the Report Writer, a user-friendly tool with which you can create reports for various analyses. The Report Writer is integrated in other SAP applications, such as Extended General Ledger and Cost Center Accounting.
Evaluation structures form the interface to the Report Writer. Evaluation structures consist of characteristics and key figures and are easy to construct.An evaluation structure with the same name exists for each information structure in the standard system.Even the self-defined information structures created in Customizing can be evaluated via the flexible analyses.
Evaluations:You can create an evaluation on the basis of the evaluation structure.
To define an evaluation, all you need to do is select the characteristics and key figures you require (pick-up technique).One of the especially useful features here is that you have the option of tailoring the layout of your report to suit your particular requirements. You can also define extra key figures for the reports, which are derived from existing key figures by means of calculation formulas. You can thereby multiply the key figures or divide one key figure by another.
============================================================
In addition to the above you can also edit a report in logistics module with the help of a report writer. below mentioned is the process for it.
It is now possible to edit your report data using the Report Writer. You can also change the layout of the report. The most important functions of the layout design are summarized below.
Summation levels:In the report screen, you can use the menu sequence View ->Summation level to specify the number of summation used to calculate total values. All totals that do not lie within the specified interval will be hidden. A summation level corresponds to a hierarchical level (for example, material level). Summation level 1 is the lowest hierarchical level. Summation level 2 is the next level up, and so on. The individual values are on the summation level 0.
The summation levels can be specified both universally (for the entire report) or locally (for specific blocks of rows). In this case, the local settings overwrite global values.
Report views:If a report is displayed on the screen, the Report Writer will then set page breaks so that exactly one page fits into the current window. This view will be defined as the standard view. As the Report Writer always processes exactly one page, you can only use the page keys and page icons to page up and down; the scroll bars cannot be used.
The page view can be determined via Settings-> Page view. The page breaks in the page view correspond to those defined in the report layout.
Hide and show rows:The function Edit->Hide rows exclude certain preselected areas of your report from the display. You can undo this command with Edit ® Show rows.
Expanding and collapsing report rows:View-> Hierarchy->Collapse allows you to hide the report rows of the sub-trees that are located underneath. View->Hierarchy ->Expand allows you to undo this command level by level.
If you want to display all the report rows that were hidden by collapsing the hierarchy or restricting the summation levels, select, View->Hierarchy-> Expand all.
View->Collapse all allows you to reduced every row block to the highest summation level.
Texts and Annotations:You can create an annotation for your report.
Select: Extras->Annotation.
You branch into the text editor of the Report Writer.
Via the menu sequence Settings->Texts, you can create and format a title page, the last page, as well as headers and footers using word processing functions.
For example, you can store variables in the header for the author of the report, the date of the selection or the name of the person who last changed the report.
Layout parameters:Using the menu sequence Settings->Layout you can specify the page format, display form, rows and columns of the report according to your needs and you can determine the settings for the graphics function. You can make these layout settings with Report->Save settings.
Hope I had been able to help you to some extent. please assign points as reward.
Rgds
Manish
Similar Messages
-
Regarding report painter for PP module
HI every one,
Is it there any report painter for PP module.
Report painter is available for FI module. Like that is it there any thing for PP module.
Other than SQL Query. Plz suggest me because function people want to do that .
full points will be awarded for correct answer
Thanks and Regards,
P.Naganjana Reddyplz urgent help me in thhis case.
-
Hi there ,
Can any one please help me in learning how we can prepare reports using report painter ... please share with me the any learning document & resource from where I Can learn the same ...
Secondly, do we use report painter for PP rather SCM reports ... I have seen in all the cases it is being used in FI reporting ...
Thanks
KaushikDear,
Most of the PP reports are for internal purpose so we never use the report painter.
Report painter is available for FI module.
Report painter is generally used for reporting from totals tables. Your requirement looks more like a query from master data tables. For this you'd better use SAP query (SQ01) or Quick Viewer (SQVI).
Please refer the below is the links to Report Painter
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
Re: Report painter
Hope it will clear your doubt.
Regards,
R.Brahmankar -
Adding ztotals table in report painter for transaction FGI3 in report type
Hello All,
I have zprograms in report painter for trasaction FGI3. For my reports i have to add Ztables..In the transaction FGI3 there is report type 020. Here they maintain the Zreports.
Can you hellp me out in adding the totals table.
ThanksHi,
Transaction FSi2 takes you there.
Alex- -
Report Painter for B/S , P&L statements
Hii gurus
this is ramki...
Plssss help me in the making of Report painter for Balance Sheet and Profit And Loss Statements , as of now i didn't did Report Painter .
I have tried no.of times , i dont know the confg also...
My client is asking DR & Cr columns for the statements..
can any body plsssss forward to me report painter confg documentation...( atleat for base level confg )
helpers will b great appreciateble..
thanks in advance
regards
ramkiHi
i am sending you a sample of how to createa report in report painter follow it,
Main Steps in Creating a Report Using Report Painter
The illustration below shows the main steps in creating a report with Report Painter:
In this section, you learn how to create a Profit Center Accounting (PCA) report with Report Painter.
For these sample reports, you should focus on the tables that correspond to the SAP application areas with which you are working. The examples shown in this section have been created in Release 4.6C.
Sample Report for Gross Profit Margin
Bungee Corporation wants to use Report Painter to create a gross margin report. This Profit Center Accounting report uses data table GLPCT. The desired PCA report displays the gross margin for each profit center.
Below is an illustration of the completed gross margin report.
Prerequisites to Creating a Report with Report Painter
Before you can create a report with Report Painter, you need to:
Determine the table
Find the library
Create sets
Create variables
The following sections explain these prerequisites.
Determine the Table
Before you can start creating the report, you must decide on the table you need to use. In this example, we use table GLPCT in Profit Center Accounting.
Find the Library
Determine the library you want to use for the desired table.
If you need to create a library, on the SAP Easy Access screen, either:
From the navigation menu, choose SAP menu → Information systems → Ad hoc reports → Report painter → Report Writer → Library → Create.
In the Command field, enter transaction GR21 and choose .
In our example, we use existing library 8A2 for creating a report.
Create Sets
Create the required sets for your report. To create a set, on the SAP Easy Access screen, either:
From the navigation menu, choose SAP menu → Information systems → Ad hoc reports → Report painter → Report Writer → Set → Create.
In the Command field, enter transaction GS01 and choose .
Note that this procedure is not necessary for creating the report given in the example that follows.
Create Variables
Create any variables for the fields that must be entered before the report is executed. To create a variable, on the SAP Easy Access screen, either:
From the navigation menu, choose SAP menu → Information systems → Ad hoc reports → Report painter → Report Writer → Variable → Create.
In the Command field, enter transaction GS11 and choose .
Note that this procedure is not necessary for the sample report in the next section.
Creating a Report with Report Painter
When you are ready to create the report using Report Painter, use the following steps.
Example Task: Creating a report using Report Painter
1. On the SAP Easy Access screen, either:
o From the navigation menu, choose: SAP menu → Information systems → Ad hoc reports → Report painter → Report → Create.
o In the Command field, enter transaction GRR1 and choose .
2. On the Report Painter: Create Report screen:
a. In Library, enter the name of the library to be used for the report (for this example, 8A2).
b. In the Report, enter a name for your report and a short text description.
c. Choose Create.
1.
To help you better understand how to create a report in Report Painter, the next procedures explain the varying substeps. You can either:
o Define the rows (or rows with a formula)
o Define the columns (or columns with a formula)
o Define the general data selection
Define Rows
Example Task: Defining rows (including defining a row with a formula)
To start defining the rows, on the Report Painter: Create Report screen, double click on Row
On the Element definition: Row1 dialog box:
a. To include characteristics in the first row of the report, select the desired characteristics in the Available characteristics frame (for example, Account number)
b. Use to transfer the chosen characteristic to the Selected characteristics frame.
c. In From, enter the account number(s) you want to include in the row definition. Either enter to and from values or a group set (for example, the value 800000).
d. To enter the row heading, choose
On the Text maintenance dialog box:
a. In Short, enter the desired short text (for example, Revenue).
b. To copy the short text into the Medium and Long text fields, choose Copy short text.
c. To continue, choose
On the Element definition: Row1 dialog box:
a. To check if the selection is correct, choose Check.
b. To transfer the selection to the row 1 definition, choose Confirm.
You have now defined the first row.
To define the second row for costs, on the Report Painter: Create Report screen, double-click on Row 2.
On the Select element type dialog box:
a. Select Characteristics.
b. Choose
On the Element definition Row 2 dialog box:
a. To include characteristics in the second row of the report, select the desired characteristics in the Available characteristics frame (for example, Account number)
b. Use to transfer the chosen characteristic to the Selected characteristics frame.
c. In From and To, enter the account number(s) you want to include in the row definition (for example, 400000 and 490000).
d. To enter the row heading, choose
On the Text maintenance dialog box:
a. In Short, enter the desired short text (for example, Costs).
b. Choose Copy short text to copy the short text into the Medium and Long text fields.
c. To continue, choose
On the Report Painter: Create Report screen:
a. You can now choose to add further rows with other required characteristics. In this example, you can create a formula in the third row.
b. Double-click on Row 3.
On the Select element type screen:
a. Select Formula as the row element type.
b. Choose
On the Enter Formula screen:
a. Enter the formula for Row 3. You can either type it in or use your mouse and the formula components buttons. If you type the formula, do not forget the spaces. In this example, Y001 and Y002 represent Revenue and Costs respectively.
b. To check the correctness of the formula, choose Check.
c. Choose
On the resulting Text maintenance dialog box:
a. In Short field, enter the text for the formula field (for example, Gross Marg).
b. In Medium and Long fields, enter the required text (for example, Gross Margin).
c. Choose .
You have now defined three rows (Revenue, Costs, and Gross Margin).
Define Columns
Example Task: Defining columns
On the Report Painter: Create Report screen, double-click on the first column, Column 1.
On the Select Element Type (not shown) dialog box:
a. Select Key Figure with characteristics.
b. Choose .
On the Element definition: Column 1 dialog box:
c. In the Basic Key figure field, use the dropdown to select Amount in company code curr.
d. In the Available Characteristics frame, select the desired characteristic for column 1 (for example, Fiscal Year).
If you want to be prompted for the fiscal year at the time of running the report, you must make this a variable instead of a value.
e. Choose to move the desired characteristic to the selected characteristics frame (for example, Fiscal year).
f. Place your cursor in the From value field and select the checkbox to the left under (variable on/off).
g. To view the possible entries for the From field, choose .
h. From the resulting selection dialog box:
 Select a variable from the list of available variables (for example, CYear).
 Choose .
i. On the Element definition dialog box, choose .
j. On the resulting Text maintenance dialog box:
 In Short, enter a text for the column header (for example, Curr Year).
 To copy the short text to Medium and Long text fields, choose the Copy short text button.
 Choose .
Now you have defined the column 1 for your report.
k. Back on the Element definition dialog box, choose Confirm.
On the Report Painter: Create Report screen, define column 2 and all other columns you choose to define. You can define these columns either by:
o Repeating steps for column 1
o Copying columns
o Entering a formula that calculates the difference between columns (for example, between Current Year and Prior Year [variable is Pyear] in a column called Variance)
Adding a column or formula is similar to adding a row formula. After defining the rows and the columns, the screen would appear as follows.
General Data Selection
After you define the rows and columns, define the general data selection screen for the report.
Example Task: Defining the general data selection screen for the report
1. On the Report Painter: Create Report screen, from the menu bar, choose Edit → General data selection.
2. On the Element definition: General data selection screen:
a. From the Available characteristics frame, select the fields to add to the general data selection as shown.
b. Choose to move the selections into the Selected characteristics frame.
c. Enter the values for each field. (For example, the standard ledger for PCA is 8A to 8E and the U.S. company code in IDES is 3000. This example is a year-to-date report, so all 12 periods are in the range. The standard Version in PCA is 0, the Record type for actual dollars is 0, and CO is 2000).
d. To check the selections, choose Check.
e. To create the definition for the general data selection for the report, choose Confirm.
3. On the Report Painter: Change Report screen:
a. To save the report, choose
To include the report into a report group, choose Environment → Assign report group.
1. On the Insert Report in Report Group dialog box:
a. In Report group, enter a report group name (for example, ZTGR).
b. Choose .
2. On the Create report group dialog box, choose Yes to create and assign to a new report group.
Display and Execute the Report
Example Task: Displaying the report you created in the previous steps
1. On the SAP Easy Access screen, either:
o From the navigation menu, choose: SAP menu → Information systems → Ad hoc reports → Report painter → Report → Display.
o In the Command field, enter transaction GRR3 and choose .
2. On the Report Painter: Display Report screen:
a. Double-click on your report.
b. Review the report display.
c. To execute the report, from the application toolbar, choose execute.
On the Selection screen:
a. Enter the variables used to execute the report (for example, Current Year 2000 and Last Fiscal Year as 1999).
b. On the application toolbar, choose execute.
The report appears. You have successfully created a report in Report Painter.
You can also execute the report through the report group (for example, ZTGR).
1. On the SAP Easy Access screen, choose SAP menu → Information systems → Ad hoc reports → Report Painter → Report Writer → Report group → Execute or in the Command field, enter transaction GR55 and choose
2. On the Execute Report Group: Initial Screen:
o In Report Group, use to select a report group.
o Choose .
3. On the next screen, enter appropriate values and choose .
4. On the next screen, from the menu bar, choose:
o Settings → Column attributes to change the column attributes such as changing the column width, setting the scaling factor, and setting decimal place numbering for number display.
o Settings → Summation levels to specify a range of summation levels for which totals will display.
o Settings → Print page format to change the layout of the report output.
5. To transfer the report to Microsoft Excel or Lotus 123, from the application toolbar, choose .
6. On the Options dialog box, select the radio button of your choice and choose . Note that for the report to open in Microsoft Excel or Lotus 123, you need to have these applications installed on your PC.
7. To get back to the original display of the report, select Inactive on the Options dialog box.
Understanding the Report List
After executing a Report Painter report, several additional functions can be applied to the output to make your reports as meaningful as possible. You can:
Sort on each column.
Highlight rows that meet the threshold criteria, for example any amount greater than 6,000.
Drill down from any line item. Drilling down you can access ABAP programs, transaction codes, SAP Queries, drilldown reports, or other Report Painter and Report Writer reports.
Launch SAP Graphics.
Send the report through SAP mail.
Save as an extract to be brought up later.
Expand and collapse rows.
Change the layout settings.
Display the report in Microsoft Excel with office integration.
hope this gives you an idea, and send me an email to [email protected] i will send you a doc on it,
if this was helpful then assign points ..
regards
Jay -
Attaching Variable to the Library for Report Painter for Cost center report
Hi,
I want to attach the Variable - "Cost element group" to the Library for Report Painter for getting Cost center report. The Cost center report should be cost element group wise with actaul, budget and variance. Please let me know the process.hi..
I think you have to first define Attribute mis as "V" in Cost element master basic data tab for the elements you want to capture as varible.
Then make a Cost element group / set in KAH1/GS01 and use it in your report.
kkumar -
Diaplay authorization for all modules
Hi All,
Can any one tell me how to assign display authorization for all modules like sd, ps, mm, fico ,hr ..
is there any profile available for that ???
any idea would be great.
Thank for ur help in advance.
Regards,
Venki> And best would be if you can share the created copy of SAP_ALL with SDN users - hope moderators wouldn't mind this sharing.
Davinder,
I'm afraid you're chasing ghosts here, as have many before you and I'm afraid it will not stop here.
The reason a search didn't bring up an easy solution (see your other thread, SAP BASIS Display only Role) is because there's no easy way to get to a display only role.
Some thoughts:
1- The amount of authorization objects varies from system to system, due to patch levels and installed add-ons so sharing a role built on a 'strange' system will have it's flaws and due to the amount of objects in SAP_ALL or a copy will make it very difficult to spot those.
2- There are somewhere between 150-200 different activity related fields in an ECC systems' authorization objects and for quite a few 03 is not display. Some do not have a display activity. See below as well.
3- There are a lot of objects that do not have any activity related field so putting them in a role and claiming it is read-only is downright dangerous.
To create proper display roles you will need to get requirements from the business, not only to build the roles but also to be able to test them. I've seen long lasting discussions whether printing is a display activity or not......
Jurjen -
SAP Business one Manual / Documentation for all Modules
Hi,
SAP Business one Manual / Documentation for all modules is required by our client.
The details should include screen wise explanation of each and every form in the SAP Business one package for all modules.
Please provide me with link so I can download such information which would be useful for the User post implementation.
Regards,
Siddheshhi siddesh,
Best user manual is context help available in B1(Press F1/ ? mark),It is also available
in this link for 2005 & 2007 Versions.
http://help.sap.com/saphelp_sbo2005b/helpdata/en/1d/48a291fc4a0448bbc8dacd344e956c/frameset.htm
Crispy overview of all topics can be available in wiki page
https://www.sdn.sap.com/irj/scn/wiki
More documents is available in service market place which requires s-userid & password.
http://service.sap.com/smb/sbo/documentation.
Edited by: Jeyakanthan A on May 15, 2009 4:33 PM -
Dear experts,
I need to create a custom report with ReportPainter with the data you see with t.FAGLB03.
Since there are no standard reports for New GL, to copy and modify, i created a library by copying the library 0FL (Table FAGLFLEXT) and i stopped after :(. For example, "Lead column" must be a hierarchy of profit centers. In the "Element definition" i added "Name" - "Profit Center" and chose "Characteristic is Interpreted as Set / Hierarchy," and "Characteristic is Interpreted as variable. In the list of "Value of variable" for the "From" there is no variable that refers to the table FAGLFLEXT, PRCTR field.
What should I do? I create all the necessary variables with T.GS11, or is there an easier way? Can I use something existing?
Please, can you give me an explanation step-by-step what I should do. Any advice is welcome!
Thank you in advance.Hi Serena,
As stated you can create your own reports using the standard SAP library 0FL
you do not need to create a custom library.
One tip I have is that If you are creating reports with the Profit Center scenario active then
you can still use transaction code KE5B to copy your Financial Statement Version (FSV) groups to EC-PCA.
Even though your reporting source will NOT be EC-PCA in the New G/L, this method can still be
used as a short cut to create account groups that can be referenced as sets in Report Painter.
I used this method in the lead column for "Account Number" to easily generate a FSV style report
in report painter in the New G/L with the profit center scenario activated.
- Good Luck -
Report Painter for Creating Report in Group currency
Dear all,
I have created a report using report painter. I but currently the figures are in Local currency. May I ask how can I convert these figures into Group currency?
Thanks.Hi,
In the characteristics you have defined if you double click you can see on top BASIC KEY FIGURE select Group Currency and the same shall happen.
Revert for further help
Regards,
Rahul -
Report Painter for Non Leading Ledger (Error GH113)
Hi,
Kindly note that we are in the process of enhancing a report for Monthly Balance Sheet as per our client's requirement. The report is based on report painter and we want to add Ledger as an input selection so that the report can be run for Leading Ledger(0L) and for Non Leading ledger(CL)as well .Initially there was no ledger selection and the report ran only for Leading ledger (0L). However when we try to run it for non leading ledger CL it throws an error message GH113 (more than one ledger not allowed in drill down report.)
Our ABAP Consultants have investigated this issue and suggested that for field (RLDNR) ledger the program is picking up "CL" as per input selection , However 0L is also getting captured thereby resulting in conflict and consequently throwing error GH113.
Concern
1) Does this report has a constraint that it can be run only for leading ledger and not for non leading ledger?
2) Apart from report painter form are there any other default setting which extracts "0L" and puts in the report.
Also note that the report painter form settings have been checked thoroughly and ledger has been defined as local variable for input selection.
ThanksHi,
Thanks for your quick response. I have already added the ledger as part of report selection and declared it as a local variable so that input selection is possible. but When I select the non leading ledger "CL" and try to execute report it throws error message GH113.
have checked all the settings in report painter form and not too sure as to from where the report is picking up Leading ledger "0L" although as a part of input selection i have selected non leading ledger "CL"
Appreciate your response.
Thanks -
Standard And Customized BEx Reports & workbooks for the Modules FI,SD,MM
Hi..All
Can any one explain about Standard and customized BEx Reports and workbooks which were frequently used in implementation projects for the modules SD,MM and FI?
Thanks & Regards
JonnHi John,
Find below some of FI(AP) queries....
1.Accounts Receivable: Payment History -0FIAR_C05_Q0001
2.Accounts Receivable: Overdue Analysis -0FIAR_C03_Q0005
3.Accounts Receivable: Days Agreed / Days Taken -0FIAR_C03_Q0001
you can find some queries in help.sap.com
I don;t remember the queries used for other modules...you can refer the below link and identify the queries most usefull for your requirements...
help.sap.com/bw
thanks,
vachan -
Report Painter for Funds Management
Hi all,
I try to develop a budget vs actual report through report painter (tcode: FMEN and FMEK).
The problem is when execute the report, there is no budget data, just actual data and variance.
When create the form, I used key figure :
1. Annual budget (current) in FM area crcy with debit type=3 (expenditures), budget version=0
2. Commitments/actuals (PB) in FMAC with value type=66 (profit transfer postings) and 54 (invoice) --> I used the actual from the invoice.
3. Formula: actual - budget
Is there something wrong when define the key figure of budget data?
Many helps.
ThanksHi,
The library (4FM) is based on availability control tables; therefore, only commitment items where either budget or posting is registered will be presented. Define correctly the parameters within the selection making emphasis on record type and ledger - it should do the work for you.
Regards,
Eli -
Report Painter for GR55 report
Hi
I am changing the formula of one cell of one column in report painter type report. what is happening with my report there are FIVE columns of profit center AND one TOTAL column , every column has 10 rows, there are three rows of total revenue , gross profit and % value of , Gross profit / Total revenue. this % figure is correct for above mentioned five columns but for total column , it is adding horizontally all the five % figure and gives the %GP figure , which is incorrect, it should be TOTAL OF GROSS PROFIT / TOTAL OF REVENUE in TOTAL column itself. now formula for total column for total revenue or gross profit are correct as it is adding horizontally and giving the total, but for only one cell of the column that is GP % in TOTAL COLUMN needs to be changed, HOW it can be done ?
Thanks
DeepakYou can not change a particular cell only in report painter.
Thanks
Ganesh -
Sample ALV report required for FI module
Hello friends,
I am develoing ALV report for FI module for that i need some sample ALV report. If someone have than please send it to me.
Thanx & Regards,
Rahul TaleleHI,
SEE THE SAMPLE REPORT
Fringe Benefit Tax Report
Program Name :
Object ID :
Functional Analyst :
Programmer :
Start date :
Initial CTS :
Description : FRINGE Benefit Tax
Includes :
Function Modules :
Logical database :
Transaction Code :
External references :
Modification Log
Date | Modified by | CTS number | Comments
| | | Initial Version *
REPORT ZFI_FBT NO STANDARD PAGE HEADING LINE-SIZE 255.
TYPE-POOLS: SLIS.
TYPES : BEGIN OF
T_BSIS,
BUKRS TYPE BUKRS, " Company Code
HKONT TYPE HKONT, " General Ledger Account
GJAHR TYPE GJAHR,
BELNR TYPE BELNR_D, " Accounting Document Number
BUDAT TYPE BUDAT, " Posting Date in the Document
BLDAT TYPE BLDAT, " Document Date in Document
XBLNR TYPE XBLNR1, " Reference Document Number
BSCHL TYPE BSCHL, " Posting Key
DMBTR TYPE DMBTR, " Amount in Local Currency
AUFNR TYPE AUFNR_NEU, " Order Number
NONFBT TYPE DMBTR, " non fbt amount
SUBFBT TYPE DMBTR, " subject to fbt amount
ZFI_FBT TYPE ZFI_FBT, " Qualifying amount.
AMOUNT TYPE DMBTR,
FBTPAY TYPE DMBTR,
ZFI_PAY TYPE ZFI_PAY,
END OF T_BSIS,
T_IT_BSIS TYPE STANDARD TABLE OF T_BSIS.
TYPES : BEGIN OF T_FRINGE,
ZFI_HKONT TYPE HKONT,
ZFI_FBT TYPE ZFI_FBT,
ZFI_PAY TYPE ZFI_PAY,
END OF T_FRINGE,
T_IT_FRINGE TYPE STANDARD TABLE OF T_FRINGE.
DATA : GIT_FRINGE TYPE T_IT_FRINGE,
GWA_FRINGE TYPE T_FRINGE.
DATA : GIT_BSIS TYPE T_IT_BSIS,
GWA_BSIS TYPE T_BSIS.
DATA : G_HKONT TYPE HKONT,
G_BUDAT TYPE BUDAT,
G_AUFNR TYPE AUFNR_NEU.
FIELD-SYMBOLS : <BSIS> TYPE T_BSIS.
DATA : G_REPID TYPE SY-REPID,
GIT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
GWA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
GT_SORT TYPE SLIS_T_SORTINFO_ALV,
GT_EVENTS TYPE SLIS_T_EVENT,
GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
GS_LAYOUT TYPE SLIS_LAYOUT_ALV.
GS_LAYOUT-ZEBRA = 'X'.
GS_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
CONSTANTS : C_50(2) TYPE C VALUE '50'.
SELECTION SCREEN DEFINITIONS
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_BUKRS TYPE BUKRS DEFAULT 'H901' OBLIGATORY.
SELECT-OPTIONS : S_HKONT FOR G_HKONT,
S_BUDAT FOR G_BUDAT.
*PARAMETERS : P_AUFNR TYPE AUFNR_NEU DEFAULT '000000100001' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
EVENTS
INITIALIZATION.
INITIALIZATION.
G_REPID = SY-REPID.
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
PERFORM GET_ZTABLE. " get data from ZFII_FRINGE table
START-OF-SELECTION.
START-OF-SELECTION.
PERFORM GET_DATA. " get data from BSIS table
IF NOT GIT_BSIS IS INITIAL.
PERFORM GET_PERCENTAGE. " to get the percentages from table ZFII_FRINGE
PERFORM CHK4_INTERNAL. " checking for the posting key wheather th document is reversed
" and checking wheather internal order is FBT or non-FBT
ENDIF.
END-OF-SELECTION.
END-OF-SELECTION.
IF NOT GIT_BSIS IS INITIAL.
PERFORM DISPLAY. " display ALV GRID display
ENDIF.
*& Form get_data
text
--> p1 text
<-- p2 text
FORM GET_DATA .
SELECT
BUKRS
HKONT
GJAHR
BELNR
BUDAT
BLDAT
XBLNR
BSCHL
DMBTR
AUFNR FROM BSIS
INTO TABLE GIT_BSIS
WHERE BUKRS EQ P_BUKRS AND
HKONT IN S_HKONT AND
BUDAT IN S_BUDAT.
IF SY-SUBRC NE 0.
MESSAGE I000(ZFI) WITH 'No data exist'.
EXIT.
ENDIF.
ENDFORM. " get_data
*& Form display
FORM DISPLAY .
PERFORM BUILD_FIELD_CATALOUGE.
PERFORM GET_EVENTS.
PERFORM DETERMINE_SORT_SEQUENCE.
PERFORM SUB_COMMENTERY_BUILD.
PERFORM ALV_DISPLAY.
ENDFORM. " display
*& Form build_field_catalouge
FORM BUILD_FIELD_CATALOUGE.
DATA : L_POS TYPE I.
L_POS = 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'HKONT' " InTab Field Name
'GIT_BSIS' " InTab Name
'10' " Output Length
'GL Account' " Column Name Text
' ' " Datatype
'X' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
' '. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'BELNR' " InTab Field Name
'GIT_BSIS' " InTab Name
'10' " Output Length
'Document No.' " Column Name Text
' ' " Datatype
'X' " Key?
'1' " Row Position
'X' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
' '. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'BUDAT' " InTab Field Name
'GIT_BSIS' " InTab Name
'10' " Output Length
'Posting Date' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
' '. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'BLDAT' " InTab Field Name
'GIT_BSIS' " InTab Name
'10' " Output Length
'Docu. Date' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
' '. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'XBLNR' " InTab Field Name
'GIT_BSIS' " InTab Name
'16' " Output Length
'Ref. Doc. Number' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'DMBTR' " InTab Field Name
'GIT_BSIS' " InTab Name
'16' " Output Length
'Gross Amount' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'SUBFBT' " InTab Field Name
'GIT_BSIS' " InTab Name
'16' " Output Length
'FBT Amount' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'NONFBT' " InTab Field Name
'GIT_BSIS' " InTab Name
'16' " Output Length
'Non FBT Amount' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'ZFI_FBT' " InTab Field Name
'GIT_BSIS' " InTab Name
'12' " Output Length
'Percentage' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
' '. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'AMOUNT' " InTab Field Name
'GIT_BSIS' " InTab Name
'16' " Output Length
'Qualifying Amount' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'FBTPAY' " InTab Field Name
'GIT_BSIS' " InTab Name
'12' " Output Length
'FBT payable' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
ENDFORM. " build_field_catalouge
*& Form init_field_catalog
text
FORM INIT_FIELD_CATALOG USING P_GIT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV
PV_POS LIKE GWA_FIELDCAT-COL_POS
PV_FIELDNAME LIKE GWA_FIELDCAT-FIELDNAME
PV_TABNAME LIKE GWA_FIELDCAT-TABNAME
PV_OUTPUT LIKE GWA_FIELDCAT-OUTPUTLEN
PV_SELTEXT LIKE GWA_FIELDCAT-SELTEXT_M
PV_DATATYPE LIKE GWA_FIELDCAT-DATATYPE
PV_KEY LIKE GWA_FIELDCAT-KEY
PV_ROW LIKE GWA_FIELDCAT-ROW_POS
PV_HOTSPOT LIKE GWA_FIELDCAT-HOTSPOT
PV_EMPHASIZE LIKE GWA_FIELDCAT-EMPHASIZE
PV_KEY_SEL LIKE GWA_FIELDCAT-KEY_SEL
PV_JUST LIKE GWA_FIELDCAT-JUST
PV_SUM LIKE GWA_FIELDCAT-DO_SUM.
DATA: LT_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
LT_FIELDCAT-OUTPUTLEN = PV_OUTPUT.
LT_FIELDCAT-COL_POS = PV_POS.
LT_FIELDCAT-FIELDNAME = PV_FIELDNAME.
LT_FIELDCAT-TABNAME = PV_TABNAME.
LT_FIELDCAT-SELTEXT_M = PV_SELTEXT.
LT_FIELDCAT-KEY = PV_KEY.
LT_FIELDCAT-ROW_POS = PV_ROW.
LT_FIELDCAT-HOTSPOT = PV_HOTSPOT.
LT_FIELDCAT-EMPHASIZE = PV_EMPHASIZE.
LT_FIELDCAT-KEY_SEL = PV_KEY_SEL.
LT_FIELDCAT-DO_SUM = PV_SUM.
LT_FIELDCAT-JUST = PV_JUST.
LT_FIELDCAT-DATATYPE = PV_DATATYPE.
APPEND LT_FIELDCAT TO P_GIT_FIELDCAT.
CLEAR LT_FIELDCAT.
ENDFORM. " init_field_catalog
*& Form alv_display
text
--> p1 text
<-- p2 text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
i_grid_title = 'Fringe Benefit Tax'
I_GRID_SETTINGS =
IS_LAYOUT = GS_LAYOUT
IT_FIELDCAT = GIT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = GT_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = GT_EVENTS[]
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = GIT_BSIS
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " alv_display
*& Form chk4_internal
text
--> p1 text
<-- p2 text
FORM CHK4_INTERNAL .
LOOP AT GIT_BSIS ASSIGNING <BSIS>.
IF <BSIS> IS ASSIGNED.
IF <BSIS>-BSCHL = C_50.
<BSIS>-DMBTR = <BSIS>-DMBTR * -1.
ENDIF.
IF NOT <bsis>-aufnr IS INITIAL.
IF <BSIS>-AUFNR = '000000100000'. " P_AUFNR.
<BSIS>-SUBFBT = <BSIS>-DMBTR.
<BSIS>-AMOUNT = ( <BSIS>-SUBFBT * <BSIS>-ZFI_FBT ) / 100.
ELSE.
IF <bsis>-aufnr = '000000100020'.
<BSIS>-NONFBT = <BSIS>-DMBTR.
ENDIF.
ENDIF.
<BSIS>-FBTPAY = ( <BSIS>-AMOUNT * <BSIS>-ZFI_PAY ) / 100.
ENDIF.
ENDLOOP.
UNASSIGN <BSIS>.
ENDFORM. " chk4_internal
*& Form get_ztable
text
--> p1 text
<-- p2 text
FORM GET_ZTABLE .
REFRESH : GIT_FRINGE.
SELECT HKONT
ZFI_FBT
ZFI_PAY
FROM ZFI_FBT_DETL
INTO TABLE GIT_FRINGE
FOR ALL ENTRIES IN s_hkont
WHERE HKONT IN S_HKONT.
CHECK SY-SUBRC EQ 0.
SORT GIT_FRINGE BY ZFI_HKONT.
ENDFORM. " get_ztable
*& Form get_percentage
text
--> p1 text
<-- p2 text
FORM GET_PERCENTAGE .
CLEAR : GWA_FRINGE.
LOOP AT GIT_BSIS ASSIGNING <BSIS>.
IF <BSIS> IS ASSIGNED.
READ TABLE GIT_FRINGE INTO GWA_FRINGE WITH KEY
ZFI_HKONT = <BSIS>-HKONT
BINARY SEARCH.
CHECK SY-SUBRC EQ 0.
<BSIS>-ZFI_FBT = GWA_FRINGE-ZFI_FBT.
<BSIS>-ZFI_PAY = GWA_FRINGE-ZFI_PAY.
ENDIF.
ENDLOOP.
UNASSIGN <BSIS>.
ENDFORM. " get_percentage
*& Form determine_sort_sequence
text
--> p1 text
<-- p2 text
FORM DETERMINE_SORT_SEQUENCE .
DATA : LS_SORT TYPE SLIS_SORTINFO_ALV.
LS_SORT-SPOS = 1. " Sort order
LS_SORT-FIELDNAME = 'HKONT'.
LS_SORT-TABNAME = 'GIT_BSIS'.
LS_SORT-UP = 'X'.
LS_SORT-SUBTOT = 'X'. " Sub total allowed
APPEND LS_SORT TO GT_SORT.
CLEAR LS_SORT.
ENDFORM. " determine_sort_sequence
*& Form get_events
text
--> p1 text
<-- p2 text
FORM GET_EVENTS .
CONSTANTS:
GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
GC_FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = GT_EVENTS.
READ TABLE GT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO GT_EVENTS.
ENDIF.
READ TABLE GT_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_USER_COMMAND TO LS_EVENT-FORM.
APPEND LS_EVENT TO GT_EVENTS.
ENDIF.
ENDFORM. " get_events
*& Form sub_commentery_build
text
--> p1 text
<-- p2 text
FORM SUB_COMMENTERY_BUILD .
DATA: LS_LINE TYPE SLIS_LISTHEADER.
DATA : L_LOW TYPE CHAR10,
L_HIGH TYPE CHAR10,
L_DATE TYPE CHAR25.
CONCATENATE S_BUDAT-LOW6(2) '.' S_BUDAT-LOW4(2) '.' S_BUDAT-LOW+0(4) INTO L_LOW.
CONCATENATE S_BUDAT-HIGH6(2) '.' S_BUDAT-HIGH4(2) '.' S_BUDAT-HIGH+0(4) INTO L_HIGH.
CONCATENATE L_LOW ' - ' L_HIGH INTO L_DATE.
***header
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
LS_LINE-KEY: not used for this type
LS_LINE-INFO = 'Fringe Benefit Tax'.
APPEND LS_LINE TO GT_LIST_TOP_OF_PAGE.
***Selection
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = 'Company Code'.
LS_LINE-INFO = P_BUKRS.
APPEND LS_LINE TO GT_LIST_TOP_OF_PAGE.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = 'Posting Date'.
LS_LINE-INFO = L_DATE.
APPEND LS_LINE TO GT_LIST_TOP_OF_PAGE.
ENDFORM. " sub_commentery_build
FORM TOP_OF_PAGE *
When TOP-OF-PAGE will be fired , this event will be called and it
will use the contents of i_list_top_of_page for output in the header
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'ENJOYSAP_LOGO'
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM. "top_of_page
*& Form USER_COMMAND
Called from within the ALV processes. Currently, '&IC1' is used to
process the hotspot and display the document 'picked' by the user.
FORM USER_COMMAND USING PV_UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
CLEAR : GWA_BSIS.
CASE PV_UCOMM.
WHEN '&IC1'.
READ TABLE GIT_BSIS INTO GWA_BSIS INDEX SELFIELD-TABINDEX.
CASE SELFIELD-SEL_TAB_FIELD.
WHEN 'GIT_BSIS-BELNR'.
IF NOT GWA_BSIS-BELNR IS INITIAL.
SET PARAMETER ID: 'BUK' FIELD GWA_BSIS-BUKRS,
'BLN' FIELD GWA_BSIS-BELNR,
'GJR' FIELD GWA_BSIS-GJAHR.
CALL TRANSACTION 'FB03' AND SKIP FIRST SCREEN.
ENDIF.
WHEN OTHERS.
ENDCASE.
WHEN OTHERS.
ENDCASE.
CLEAR : GWA_BSIS.
ENDFORM. "user_command
*& Form SET_PF_STATUS
text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD_FULLSCREEN' OF PROGRAM 'SAPLKKBL'.
ENDFORM. "SET_PF_STATUSENDFORM. "SET_PF_STATUS
AWARD POINTS IF USEFUL....
Maybe you are looking for
-
Crm_order_maintain - how to add a doc_flow link?
Problem: I have searched several topic, articles, google, standard code, but have failed to add a doc_flow item (a campaign element) using the FM crm_order_maintain. Source code: Here is a paste of my function module: [http://pastebin.com/XL7c9DUr|ht
-
How to chage the display name in SC browser for the custome fields?
Hi, I created 2 custom fields for Shopping cart in SRM. How to chage the display name in SC browser for this custome fields? Thanks Kevin
-
Hello , Please find here a query I need to enhance , it takes now above 1 minute to complete and supposed to not exceed 5 sec. appreciate your support, declare @@StartDate as datetime, @@EndDate as datetime, @@CCODE as varchar(6) set @@StartDate =
-
Weird characters in search highlight
I tried using Calvin Ly's search highlight technique. It works fine for a while and then mu users get weird little square characters displaying in bulleted lists in their browsers. Has anyone else experienced this problem? Know of a fix? If I do not
-
Integration Directory not getting opened
hi All, We are not able to open Integration Directory in XI 7.0 but IR (repository) works fine. While i was browsing through the Forum found (Forum ID# 135222) that we can just re-start the sap.com/com.sap.xi.directory in Visual Administrator but not