Report Preview in CMC keeps prompting for parameters ...

Dear Experts, I am trying to see the preview of a report in CMC (CMC -> Folders -> Browse to the report and then click on review). It prompts for parameters and I enter the parameters. The report shows the result but then prompts for the parameters again. I check the same report in Dev and QA and they work. All these systems have same configuration, same version of IE and same settings. I check them all.  Kindly point out if I'm missing something. I appreciate any help.

Hi
what exactly do you mean by:
The report shows the result but then prompts for the parameters again
Is your report shown and after X seconds it prompts again for the parameters automatically?
Regards
Stratos

Similar Messages

  • Report does not prompt for parameters when SeparatePages=False

    Hi all. We are using CR2008 Basic w/SP1 along with VS2008. Within our application, reports pull up fine and prompt for parameters using the CrystalReportViewer against the web service. SeparatePages is set to True. We want to change SeparatePages to False, but when I do that any report that should prompt for parameters is not.
    The reports were created in CR 8.5. We have upgraded them to CR2008 (open, refresh, save) which has greatly increased performance. With some further testing, I've discovered that if I take a report that doesn't currently have any parameters and add one via VS2008 report designer, it WILL prompt for the parameter when I run it in our application with SeparatePages=False.
    So I'm leaning that the problem has to do with the reports originally being created in 8.5. I've tried modifying an existing report with parameters, deleting parameters and re-adding, but I still can't get these to prompt for parameters with SeparatePages=False.
    Again, these same reports prompt for parms and work fine as long as SeparatePages=True.  I'm hoping someone might be able to shed some light on this. There are over 400 reports so re-creating them from scratch under CR2008 will be a painful option
    If I need to provide any additional information just let me know. Thank you!
    Sheila

    We are still working to resolve this issue. Testing has shown that for reports that don't return a lot of data, the prompt for parameters will display. But for larger reports, we just see the hour glass and the parameter prompt never displays. It's almost like the reports are trying to return the full dataset without any paramters being passed BEFORE it will prompt for parameters. This would explain why smaller reports will prompt and larger reports never will (?). Not sure that is what is happening.  Again, with SeparatePages=True we are immediately given the parameter prompt. With SeparatePages=False we run into the issue of no prompts.
    Here's the code behind if it help:
    ReportDocument report = new ReportDocument();
    try
        String rptFileName = @"App_Data\Reports\" + Request.QueryString.GetValues(0).GetValue(0).ToString();
        log.writeLog("Loading Report: " + rptFileName);
        String rptFile = Server.MapPath(rptFileName);
        report.Load(rptFile);
        report.Refresh();
        ConnectionInfo crConnectionInfo = new ConnectionInfo();
        log.writeDebugLog("ServerName : " + rProperties.ODBCSource);
        crConnectionInfo.ServerName = rProperties.ODBCSource;
        log.writeDebugLog("DatabaseName : " + rProperties.ODBCSource);
        crConnectionInfo.DatabaseName = rProperties.ODBCSource;
        log.writeDebugLog("UserID : " + rProperties.ODBCUser);
        crConnectionInfo.UserID = rProperties.ODBCUser;
        log.writeDebugLog("Password : " + rProperties.ODBCPassword);
        crConnectionInfo.Password = rProperties.ODBCPassword;
        foreach (CrystalDecisions.CrystalReports.Engine.Table table in report.Database.Tables)
            TableLogOnInfo crTableLogOnInfo = new TableLogOnInfo();
            crTableLogOnInfo.ConnectionInfo = crConnectionInfo;
            table.ApplyLogOnInfo(crTableLogOnInfo);
    catch (Exception err)
        log.writeLog("Error Loading Report: " + err.ToString());
        this.lblError.Text = err.ToString();
        this.ErrorTable.Visible = true;
        this.ReportTable.Visible = false;
        return;
    CrystalReportViewer1.HasCrystalLogo = false;
    CrystalReportViewer1.ReportSource = report; // _serverFileReport;

  • Crystal reports viewer will not prompt for parameters

    Help,
    I can not get crystal report viewer to prompt for parameters when called from IIS 8 on Server 2012 r2
    I can get crystal report viewer to prompt for parameters when run from vs 2010 built in web service.

    Thanks,
    The solution for me was to uninstall the latest crystal reports runtime 13.10.x and install 13.6.x instead.
    Thanks anyway.

  • Not Prompting for Parameters in .jsp page

    Post Author: montgomm
    CA Forum: General
    We have defined an input parameter to our report and it will successfully prompt for the input parameter within the designer preview.  However, once we build a .jsp page to contain the report and load it to our server, when we run it, it never prompts for any parameters. It does display the report in the .jsp, but it appears to be always running for the last parameters that we entered for the report in the designer.Any suggestions on correcting this?Is there any good documentation on parameter passing in .jsp pages?

    Yes.
    You can create a form in one jsp and have it's value sent in a parameter key to another jsp file identified as the action target.
    Here is code for first jsp file (i.e. first.jsp). This will give you a text input box and a submit button labeled sendit.
    <form action=second.jsp>
    <input type=text name=filename>
    <input type=submit name=Submit value="SendIT">
    </form>
    Here is code snibit to get the param in the second jsp file (ie. second.jsp)
    StringBuffer theparam = new StringBuffer();
    theparam.append(request.getParameter("filename"));
    out.println("The second jsp got param=" +theparam);
    Hope you get it workin'
    Gregg

  • Outlook 2010 keeps prompting for credentials

    Hello,
    I have just about every user experiencing an issue with Outlook 2010 where Outlook keeps prompting for credentials.  This has been happening ever since recent Microsoft Office updates that rolled out last week it seems. All my users still have connection
    to the exchange server and can send/reply just fine.  Issue occurs on both 32 bit and 64bit versions.  This prompt will appear every few seconds and is becoming a nuisance for all my users. 
    I have attempted the following with no resolution:
    - removed credentials from credentials manager
    - ran Outlook in safe mode
    - ran repairs on Office
    - completely removed and re-added users Outlook profile (profiles are manually configured)
    - made sure Office is up to date
    - configured Outlook account on freshly imaged PC

    Hi,
    For this issue, you can first try some suggestions in this forum content:
    Why does Outlook keep prompting for password
    Especially try NTLM Authentication to check the result.
    We have received some report about this issue since the February 10, 2015 update for Outlook 2010 (KB2956128). If you have installed this update, please note we have realized this issue and once there is any update, I'll let you know.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Why does Outlook keep prompting for password

    We have seen our community members ask questions about Outlook keeps prompting for credentials many times. This issue could be caused by numerous reasons. Below is a list of the most common reasons for this problem:
    Outlook is configured to prompt you for credentials
    Incorrect password cached in credential storage
    Required Authentication Settings for outgoing server and incoming server
    Outlook Anywhere is not configured to use NTLM Authentication
    Corrupt Outlook profile
    Slow or unstable network connection
    Antivirus programs
    Shared calendars
    Outlook is configured to prompt you for credentials
    If you are using an Exchange account, there is a setting in your Outlook profile to always prompt for logon credentials. To find the setting, please follow:
    1. In Outlook 213, go to File tab > Info >
    Account Settings > Account Settings…
    2. Highlight your Exchange account and click Change button.
    3. Click on More Settings button.
    4. Select the Security tab.
    5. Under the User Identification, make sure the “Always prompt for logon credentials” option is not selected.
    If you are using other types of email, please make sure you have ticked the option “Remember password”.
    Incorrect credential cached in Credential Manager
    Your Windows system stores user credentials on your computer. If the cached credentials are incorrect, you will be prompted for password. This issue usually happens after the password for your domain user account is changed. Before your password changed,
    you saved your credentials. The stored credentials are not overwritten when Outlook triggers the authentication prompt even if you enable the Remember my credentials option.
    To fix this issue, you need to remove the corrupted credentials, follow these steps:
    Click Start,      click Control Panel, and then click Credential Manager.
     Note If View by is set to Category, click User Accounts first, and then click Credential Manager.
    Locate  the set of credentials that has Outlook in the name.
    Click the name to expand the set of credentials, and then click Remove from Vault.
    Repeat step 3 for any additional sets of credentials that have the word Outlook in the name.
    Required Authentication Settings for outgoing server and incoming server
    Different email provider may need different authentication settings. Please make sure you have set the server settings correctly. You can contact your email provider to gather the information.
    In general, we select the “My outgoing server (SMTP) requires authentication” option and the first bullet “Use same settings as my incoming mail server”.
    In addition, click on the Advanced tab and check if you have enter the correct Server Port Number and select the correct encrypt type. Below is a screenshot for an IMAP account:
    Outlook Anywhere is not configured to use NTLM Authentication
    The Outlook Anywhere feature allows you to access your Exchange account remotely from the Internet when you are working outside your organization's firewall.
    When using Outlook Anywhere to connect to your Exchange server, we need to choose
    the authentication method among Basic Authentication, NTLM Authentication and Negotiate Authentication. The difference among them is the way that the passwords are sent when connecting to the server. With Basic Authentication,
    the password is sent in clear text. Using NTLM Authenticationcan significantly reduce the number of password prompts.
    To check the authentication setting, please go to File > Account Settings > Account Settings,
    select the Exchange account, and then click
    Change. In the Change Account wizard, click
    More Settings, and then click the Connection tab. Click the Exchange Proxy Settings button and now, you can see the settings under
    Proxy authentication settings. Try to change the authentication to
    NTLM Authentication and then check the issue again.
    Slow or unstable network connection
    If your network connection is slow or unstable, Outlook may lose connection to the mail server. When Outlook try to reconnect, it will prompt for the credentials. To verify this, please switch to a stable network environment and then check if this issue
    persists.
    Corrupt Outlook Profile
    Corrupt profile may cause Outlook to no longer remember your password. Please try to create a new mail profile in Control Panel and reconfigure your email account in the new profile to fix the issue. To create a new mail profile, you can refer:
    http://support.microsoft.com/kb/829918
    Antivirus software
    Antivirus software usually integrates into your Outlook and it may cause some conflicts. Try to temporarily turn off your antivirus software to check if the issue will be gone.
    Shared Calendar
    Shared calendars can impact the user credentials, this issue may also occur if you have shared calendars opened in Outlook. You can try to unselect the shared calendar to check the result. It’s recommended to not open the shared calendar unless you want
    to view them.
    If you have any comments, welcome to post in the forum. Thank you.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Nope...
    I went through point by point by point, top to bottom, checking and verifying every single item as a possible cause for why my system (Outlook 2013 running on Windows 8.1 and connecting to Exchange 2010) insists on prompting me for my password every single
    time I start Outlook.  None of the solutions worked, my system still prompts me.  I don't even have to supply a password.  When the prompt dialog appears, I just cancel it.  Within a few seconds, the bottom Outlook status bar changes to
    "Need Password" with a key icon to the left.  Then I just click on that message and immediately Outlook connects to Exchange.
    The freaking software is BROKEN!  Period.

  • Outlook 2013 on Windows 8.1 keeps prompting for username and password.

    Hi,
    I have a HP Pavillion TouchSmart laptop with MS Windows 8.1 OS. I had installed MS Outlook 2013 Standard. This laptop is joined to the domain like many of my users, however, it keeps prompting for username and password. The emails are still able to send
    and receive without any problem.
    I have tried to check the connectivity, both cables and wireless are well connected.
    I have tried to reinstall the Outlook 2013, but it still occurs.
    Attempted to recreate profile but it still occurs.
    For the configuration:
    I have selected negotiate authentication, and have unchecked the box that states
    "Always prompt for login credentials"
    Please advise.
    Thank you.

    Hi,
    We can also follow this forum FAQ to troubleshoot this problem:
    Why does Outlook keep prompting for password
    http://social.technet.microsoft.com/Forums/en-US/bcd2d9c2-1a1b-4446-bf32-69fee8cdf11b/why-does-outlook-keep-prompting-for-password?forum=outlook
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • HELP! Can't uninstall 8.1.2 Update - Keeps prompting for reboot

    I have Adobe Acrobat Standard. Version 8.1.0 came with the laptop. (Dell, XP, SP3)  So I updated to 8.1.2 and have no  ends of problems.  Though I have clicked on the "ok" to reboot to finish the update, it never connects that it has rebooted.
    So I tried to uninstall the 8.1.2 update.  Unfortunately the Control Panel says that the "original is not installed" and won't let me continue. So I can't uninstall from there.
    I then downloaded the Microsoft Install Clean Up utility which is recommended in other threads.  The original 8.1.0 is there and can be deleted. Unfortunately 8.1.2 is nowhere to be seen!!  So I can't remove it from there.I do also have Photoshop CS3 installed which seems to have a variety of other items listed for it.
    I have tried downloading the 8.1.2 update patch but when you try and run it, it says that there is no Adobe installed. Well that isn't true. I have 8.1.0 installed. You just can't update it or repair it because it keeps prompting for the never ending reboot.  I have tried uninstalling, reboot, re-installing 8.1.0 (via control panel AND MS install clean up) with no luck.
    So right now I'm trying to get rid of the 'computer needs to reboot' problem which I think might be tied to the failed install of 8.1.2.

    I asked on another site and actually got an answer that worked for me. Well... Sort of. This stopped the endless re-boot. Now I have to figure out why I can't manually update. It may be a result of the aborted 8.1.2 update. I'm going to try and uninstall again and start from scratch... again.
    The answers I got there I wanted to share here so others may use them.
    First Answer:
    The issue is seems to be with SP3 and Adobe Standard 8.1 update. The same issue I had experienced on Vista. Following are simple suggestion.
    1. Clean Install after reg clean -- may or may not work .Depends on SP3 and Adobe Standard compatibility.
    2. Remove Update from Start up and manually download the patches. 
            (note: Run; MSCONFIG; Startup Tab; deselect Adobe Updater; Ok; restart)
    3. Roll back to SP2 and check . Should work fine as it doing on one of my old PC.
    Second Answer: (Note:  Removing the "AdobeUpdater" from msconfig Startup tab worked for me.)
    Try the following: 
    - Click the Start button and select Run. 
    - Type in "msconfig" (without the double quotes) and click the OK button.
    - A new window will appear with several tabs near the top. Select the Startup tab.
    - Find an entry named AdobeUpdater (or similar) and remove the checkmark for it.
    - Click the OK button, which will close the window. Now restart your computer.
    I hope this will help. The drawback is that you will have to manually update Adobe Acrobat (which generally isn't a major issue).

  • CS6 keeps prompting for Java

    I can't run most CS6 applications on my updated Mac OS Lion 10.4 (MacBook Pro 17"). They still say "To open “Adobe Photoshop CS6 (or any other CS6 program),” you need to install a Java runtime, but you are not connected to the Internet." I'm always on the internet using Wifi and it works properly. Please help

    Thanks Jeff.
    Date: Mon, 2 Jul 2012 13:22:15 -0600
    From: [email protected]
    To: [email protected]
    Subject: CS6 keeps prompting for Java
        Re: CS6 keeps prompting for Java
        created by Jeff A Wright in Trial Download & Install FAQ - View the full discussion
    In that case please see Install Java (JRE) | Mac OS 10.7 Lion - http://helpx.adobe.com/x-productkb/global/install-java-jre-mac-os.html for an alternative method of installing Java.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4534245#4534245
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4534245#4534245. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Trial Download & Install FAQ by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • IPhone4 keeps prompting for email password?

    My iPhone4 keeps prompting for email password. I continue to re-enter but I continue to receive msg prompt. Help?

    More than likely that is a Yahoo issue. Their mail accounts are historically bug ridden when operated in the mobile environment. Good luck.

  • Outlook 2010 keeps prompting for password

    Hi,
    We use Exchange 2008 and Outlook 2010. For some reason, Outlook 2010 keeps prompting for password. My use entered the password and checked "Remember Password" box, but next morning when he logged in, he still got the prompt.
    I removed the Outlook credential for Outlook listed under Password Credential in Control Panel, but still no help.
    Please advise!
    Thanks in advance!
    Grace

    Hi Grace
    1. Open Outlook 2010. Click File>Account Settings>Account Settings. 
    2. Click the E-mail tab, click the Exchange Online mailbox, click Change…
    3. Click More Settings…. Click the Security tab, make sure the Always prompt for logon credentials box is unchecked. 
    Please mark it answer if it helps you solving your problem
    Amit Kotha

  • Stop Crystal from Prompting for Parameters

    Hi there,
    I am trying to stop Crystal from prompting for a parameter that has the Optional Prompt flag set to True as I want to use the HasNoValue attribute to retrieve all records when there is not a specific value sent to the parameter.
    When the parameter is created from a store procedure, I can simply set the value to nothing and handle the resulting NULL in the procedure.
    I was expecting that I could do the same for the regular parameters but this returns a "parameter field and parameter field current values are not compatible" error.
    I have tried setting the HasCurrentValue to True but this is a read only attribute.
    I have also tried setting the Viewer.ReuseParameterValuesOnRefresh to False (and True) but the report still prompts for the parameter.
    I have searched the web for the last two days and have had no joy on this so any help or pointers would be appreciated.
    Thanking you in advance

    Hi Don,
    I am using Crystal 2008 for both the report and the assemblies.
    Using the word All is not really an option as I need to process all types of parameters i.e. Boolean, integers and dates as well as strings.
    I could create some complex formulas to handle this but I need the report creation to be simple as possible as possible so that the customer can create reports at will.
    Using the Optional Prompt feature now available in 2008 I can create a simple record selection formula that looks like something like this :-
    (not HasValue({?MyParameter}) OR {Table1.Field1} = {?MyParameter})
    My problem is getting the parameter to register through my code that it has been set to HasValue = False so that the user is not prompted by the viewer to enter the parameter again.

  • Refresh_report prompts for parameters

    Following some installation problems from our installer using the .msm files to create crystal runtime info, we have switched to using the downloadable redistributable to install Crystal 2008 runtime files (SP3 & 4)
    When we do this, when our code issues a refresh_report(), the report prompts for the parameters again with the original values missing.
    We can see the parameters in the viewer (on the left) until we issue the refresh_report, and we have checked that the setting ReuseParameterValuesOnRefresh (or similar) is set to True.
    Clients running the same version of our application change behaviour if we uninstall the .msm based version and install the downloadable redistributable.
    Any suggestions (the msm based version was point blank refusing to install on certain clients (64bit W 7, but not all of them)?
    Iain

    We are using Visual Studio 2008 to write a C# wrapper to then interface with our actual application  as a COM dll.
    However, this code is working on a client where the runtime was installed using an installer which used the Crystal 2008 msm files, and isn't working where the client is installed using the re-distributable downloadable .msi files.
    We can leave our app in place, and uninstall one version of the crystal runtimes, and then install the re-dist provided by SAP and the problem manifests. Re-installing the original runtime files from the msms 'fixes' this problem, but we then cannot get this to install at all on certain clients.

  • ABAP consuming Web Service in HTTPS keeps prompting for credentials

    I have a Share Point Web Service that I want
    to call in HTTPS from ABAP
    in an ECC 6.0 SAP_BASIS 700 SP 30 system. The
    following steps have been
    executed:
    BASIS work completed –
    SAPCRYPTOLIB, HTTPS Activation, profile
    parameters, STRUST certificates
    I have created the Client Proxy in SE80 for the SharePoint WCF Web Service
    The Logical Port was created in SOAMANAGER
    The issue I have is when I test the process using SE80 sometimes it will prompt
    for credentials, sometimes it won't. The behavior is very sporadic, I
    can run it once and it prompts then the second time it doesn't. This is
    especially true after a restart of the system. The user and password
    are on the RFC destination under consumer security tab.
    Any suggestions why the prompting for
    credentials?
    Regards
    Diane Szmurlo

    Hi Sekhar,
    Please see below link. It will be helpful.
    Regards,
    Sudha

  • Unable to create a webi report and 3 times it prompting for logon credentai

    Hi,
    We have a issue,
    1.We are  unable to create a webi report and 3 times it is prompting for logon credentials.
    3.After giving the logon credentials 3 times then it is working fine.
    4.We are  using IIS Jakarta redirector .
    5.We are  able to view the webi documents successfully ,the issue occurs only when we  create a new webi report.
    Any one please help me on this issue.
    Thank you in advance.
    Environment u2013
    BOXI3.1,
    SSO,
    IIS Jakarta redirector.
    Thanks & Regards,
    Powell.

    bypass IIS and jakarta (go to tomcat directly with an enterprise account like administrator), does the issue still exist?
    Regards,
    Tim

Maybe you are looking for

  • Where did the Live Chat feature go?

    So I've been browsing the site for weeks trying to decide on my next phone, and once in a blue moon there is a "live chat" prompt with a sales rep, which is very handy for me as I'm deployed military overseas and making a 30 min international phone c

  • How do I stop TV shows from being deleted?

    Is there a way to restrict the ability to delete a tv show or series from an iPad? Our son has just deleted 2 of his cartoon series and as we are on hols, I didn't bring the laptop....also, is there a way to get the show back?

  • Using ABAP instrution to change screen field properties

    Hi, I've a screen (SE51) and i need to change field properties using an ABAP instrution. I need to do this... if variable LV_NDEP_IN is not initial, user can't change field content. I've tried this...   IF lv_ndep_in IS INITIAL.     SET CURSOR FIELD

  • GetResourceAsStream and Weblogic 6

    Hi all, I'm interested in loading some error messages from a file in Weblogic 6, and caching the result. One thing I note about this brave new world of EAR packaging is that there's really nowhere to put extra files of your own choosing. So I figured

  • Calling a specific folder  in standard KM navigation iview

    Dear developers, I'm trying to make an iview call a specific km folder of another iview (standard KM navigation iview). I believe I should use the "EPCM.doNavigate" method, setting the "Navigation context URL" argument to point to the folder I need t