Report to check Standard WBS link to which standard network and activity

Dear All,
Is there any way or standard report to check standard WBS (cj93) link to standard network/activity (CN03).
Normally we create project by using template existing, we would like to check the structure. Is there any way to check the standard template for it ( WBS template link to network/activity template).
Thank you.
Nies

Hi,
Please try this:
1. Tcode : CN41
2. Change database profile: In that in the origin check mark the Standard structure. Continue..
3. At the bottom of the selection screen check mark the standard structures.
4. In the selction area for the Project hit F4 and  select the project based on the standard WBS Element.
5. Exceute the report.
Hope this is useful.
Reward points if found useful.
thanks..

Similar Messages

  • Is there a way to force which wifi network and proxy clients connect to from WGM?

    is there a way to force which wifi network and proxy clients connect to from WGM?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Restrict network and activity to be moved between WBS

    Hi,
    Can any one suggest which BADI i have to use to restrict the network and activity moved between WBS.
    i have tried WORKORDER_UPDATE,WORKBREAKDOWN_UPDATE and PROJECTDEF_UPDATE
    non of these BADI's  are working.
    thanks in advance,
    regards,
    rams

    this depends on your requirement - what you have stated will work

  • Standard report to check Equipment-WBS-Material-Asset No

    Hi All,
    Is there a report to have a look equipment no, which is belong to WBS, material and Asset no.
    Normally i open using IE03. Any standard report to shows all part in 1 report ?
    Please advice.
    Thanks a lot.
    Nies

    ok

  • Report to check project-wbs-requesting co.code-company code in assignment

    Dear All,
    Is there any standard report to check Requesting co.code and company code (assignment tab) by project and wbs. I tried CNS43 but there is no requesting company code.
    Can we use SQ01 to create this one ? Any one can advice me how to make query for this concern.
    Please advice.
    Thank you
    Nies

    Hi,
    You can use SQ01 for this. Query the table:PRPS.
    The fields you require are:
    PRPS-PBUKR
    PRPS-ABUKR - Requesting company code.
    Muraleedharan.R

  • Report to check the WBS "system status"

    Hello friends,
    Would anyone know for a standard report where I can check for the WBS "system status"?
    i.e.: I want to know everything I have in AVAC status
    Thanks and Regards
    Alex

    You can get the system status of WBS in CN41, Execute the report , after it use the change layout option, select status.
    System will display you user / system status for all the PS Objects.
    With Regards
    Nitin P.

  • Link b/w cost center and activity of a WBS

    Hi,,
    Can anyone let me know how work center and activities of a WBS are linked?
    Please let me know ASAP...
    Regards,
    Balu

    I got to know...
    Take object id from AFVC for the activities and give it to CRHD to get the cost center

  • Texas School District Utilizes D-Link Solutions to Upgrade Network and Incre...

    Take advantage of crazy low prices while they last. From now until September 30, 2015, D-Link has dropped pricing on all DGS-1510 SmartPro Stackable switches. Instantly receive discounts ranging from $60 to $200, depending on model number.The DGS-1510 SmartPro Stackable series Gigabit Switches are one of D-Link's flagship networking products, supporting a wide range of […]
    Read More
    This topic first appeared in the Spiceworks Community

    i checked for updated firmware on the d'link dir-615 router back in september when this first happened (after the ios6 update) but the firmware was already up to date - although the last update was 2009.
    This was my first clue.
    After further research, I discovered that all DIR series products have been discontinued by D'Link.  This means that when apple is preparing for a software update, it requests all software/hardware specs from wifi router companies like D'Link, Netgear, Garmin, Cysco, etc.  Since D'LInk no longer produces DIR series routers, they did not provide the info.  D'Link only provided info for it's newest line of wireless routers.
    Leaving all existing DIR users in the dust, with a failed strategy that we'd all buy the new line of wifi routers.
    Yesterday, I purchased an Apple wifi router, although pricey at $99, i plugged it in, typed the network name and pw want to use, and it was up and running in less than 5 minutes.  The apple router will recieve software/firmware updates just as my iphone, macbook, & ipad does. Everything is working perfectly, and the higher price is worth the convenience and reliability.
    If anyone makes it this far, the only thing left would be to check with your internet service provider (comcast, RCN, etc) and make sure you have the most up to date modem.  some folks are unable to send text & pic messages on wifi using an out of date modem. (i didn't have to replace mine, but i'm also not having this issue now that i have the new apple wifi router.)
    Hope this helps at least a few people out there.

  • My Macbook Pro running Lion 10.7 will no longer connect to either my HP or Epson printers. Both printers report that they are connected to the correct wireless network and until 2 weeks ago work perfectly.

    My Macbook pro running Lion 10.7 will not connect via a wireless network to either of my printers, Epson and HP. Both printers report an excellent connection to the correct network. The Macbook reports "printer not found"
    Until 2 weeks ago all worked well. Both printers makes me think some setting in the computer must have changed.
    Any suggestions?

    System Preferences>Fax & Scan. Delete the printers and re-add them back in.

  • Does texting on an unlimited texting plan use 3G if you are not linked to a WiFi network and your 3G plan is limited ?

    I have an iPhone 3 with unlimited texting and a 450MG 3G plan, but my WiFi went down 4 days ago and is still out.
    Does texting without connected to WiFI use my 3G ? Or does texting require something else besidesthe 3G and doesn't use 3G ?
    Thanks ! (:

    SMS messages do not use cellular data. They travel over the voice network. MMS messages do use cellular data, but I do not believe they count against your data allowance, only your messaging allowance (this may vary by carrier).
    iMessages DO use cellular data if you are not connected to WiFi.

  • Reports to check what org units or positions linked

    Hi,
    I want to run a report for 2000 positions and check
    which positions are linked with which other positions
    and which positions are linked with what other

    hi,
    sap provide the two types of relationship for a objects ,
    A -
    BOTTOM  TOP
    B----
    TOP  DOWN
    for position to position  ( A position reported to another position  A|002 where 'A' is bottom up relation and 002 is infotype ( reports line to ) 
    position is the line manager of another position  B| 002 where the 'B' is top down relation and 002 is infotype .
    position manages an org unit  A |012
    an org unit is managed by position B|012
    report is HRP1001,
    RupaPrasad

  • TS3899 Cannot send email from iPhone. Outgoing settings are correct. Checked against iPad setting which are OK and can send mail OK.

    Cannot send email from iPhone. Outgoing settings are correct. Checked them against iPad settings which are OK and can send mail. What can I do?

    For IOS7.02
    The user name and password are in two places. Make  sure they are correct in both locations.
    Settings>>Mail, Contacts, Calendars>>your email>>
    First spot is here under INCOMING MAIL SERVER
    Below this is OUTGOING MAIL SERVER
    Select: SMTP smtp.comcast.net>> PRIMARY SERVER :smtp.comcast.net>>second location of user name and password
    Here is the second place that the user name and password must be checked.
    I had changed my password in the first spot, but not the second spot. I had been receiving the same error message. This fixed my problem.

  • Networks and activities attached to statistical WBS

    Hi,
    I have a statistical WBS which is attached to networks, and activities. It looks like in standard SAP, the networks and activities cannot be made statistical. So the networks and activities carries actual cost (after posting). Is there a way in SAP to make this actual cost in network and activity as statistical? Or do you think that we need to settle the cost somewhere?
    Thanks in advance for your reply.
    Aman

    As I stated before, I also know that networks, and activities cannot be statistical. My question is what would be the solution in this case? Anyway, we've decided to make all objects as statistical WBS elements to resolve the issue. Closing the thread.

  • Installing and activating Creative Suite 6 Design Standard on two computers?

    Hello!
    I purchased Creative Suite 6: Design Standard as a physical copy (with a CD) about a couple of years ago. I've installed it on my iMac, but now that I purchased a Mac Book Pro, I'd also like to install the package on the laptop. My new Mac Book Pro 13" with Retina display does not have a CD/DVD drive.
    First of all, is it possible to have an Adobe package installed and activated on two computers simultaneously?
    I tried to download the Creative Suite 6 from the Downloads on Adobe website and activate it on my laptop with the serial number that I received when I purchased the product, but the serial number did NOT work. It says "The serial number you entered is invalid." Does this problem occur because the serial number is in use on the Creative Suite, which is installed and activated on my iMac?
    Is there another way to download + install + activate the package on my laptop? Obviously without a CD/DVD drive I cannot use the physical installation CD that I purchased.
    Thanks for help in advance, I really appreciate it!
    – Miina

    Hello!
    Thanks for the reply. I've been looking into this problem more but haven't been successful in solving it. Getting a bit frustrated with this!
    The serial number seems to be the issue.. I don't know why it won't go through. Do I need a different serial number to activate a Creative Suite 6 Design Standard downloaded from the Adobe website? I used the same serial number that can be found on the back of the product box that I purchased a couple of years ago. So far I have installed and activated my product only with my iMac, and now attempting to activate it with my Mac Book Pro, so the problem is not that it's been activated too many times.
    When I finally do manage to activate this software also on my laptop, do I have to deactivate and activate it every time I wish to switch from one computer to the other? Is there a limit to how many times it can be activated/deactivated?
    Thanks again for your help!
    P.s. I also consulted this person https://forums.adobe.com/people/Nikhil%20Bisne (not sure if he is around, though) on my issue, because he was able to help somebody with a similar issue here: Re: Invalid Serial Number . The difference being that this person was activating their software for the first time, I'm trying to activate it a second time on a different machine (while still keeping the software activated on the first machine).

  • Change screen field network and upload additional wbs network activity

    Dear All,
    1st. How can i change the screen field company code in network header (assignment tab) to input or required. I tried OPUA but it doesnt show company code. In default  it shows that network header (company code) in display mode.
    2nd. How can i add additional WBS,network and activity using additional enhancement for easy use method. Or in other word, is there any enhancement program..not cj20n / cj20?
    really appreciate.
    nies

    Hi
    2nd. is there any other solutions? users donot convinience to use cj20n / or copy from template? is there badi /program upload to be used? in other words, users can maintain it in excel then upload it..
    Use this BAPI to create WBS elements
    BAPI_BUS2054_CREATE_MULTI
    Sorry for the my last post on the point 1
    The company code for network order is coming from thw WBS element, that you cannot change in network order. This is standard setting.
    Thanks
    S.Murali

Maybe you are looking for