Report to check work schedule - If case more than hundreds of work schedule

dear experts,
I have one issue to create work schedule for the next year. I want to create(pt01) active work schedule for the next year(2012).
However i have issue because I don't remember which work schedule still active.This is because we have hundreds
of work schedule rule based on emp sub group grouping, holiday calendar,psa grouping and w schedule rule.
Is there any reports to check all the active work schedule .I'm afreaid ihave missing certain  work schedule for next year...

If you use the IMG node for automatic generation of Work Schedule Rules
(Time Management > Work Schedules > Work Schedule Rules and Work Schedules > Generate Work Schedules in Batch)
you can generate all work schedules associated to a Holiday Calendar
and only the active work schedules will be generated.

Similar Messages

  • I have very little space left on the hard drive on my macbook, on my storage report it says "other" is taking up more than two thirds of the space on the hardrive. How can I identify what these files are?

    I have very little space left on the hard drive on my macbook, on my storage report it says "other" is taking up more than two thirds of the space on the hardrive. How can I identify what these files are?

    Hello,
    There is free software you can download that gives you a graphical image of what files are used on your hard drive. http://www.derlien.com/
    This may help you clean down your hard drive for more space.
    Best of luck

  • Check/uncheck record results on more than one step at a time

    I have one hundred plus sequence files and several thousand steps total. Checking and un-checking record results one step at a time takes a long time. I'd like to be able to select several steps at a time then check or un check the "Record Results" option for all those steps at once. How do I do this? I'm using TestStand 2.0

    Hi Kevin,
    Thanks for contacting National Instruments.
    Do you want to disable result recording for ALL sequences on this station? If so, you can turn on this option in the TestStand sequence editor (Configure >> Station Options, turn ON checkbox "Disable result recording for all sequences").
    However, if you only want to do this for selected sequence files, then Ray is correct - you would need to write an external routine that will automate this for you. Attached is a zipfile containing a VBScript that will iterate through one sequence file ("c:\test.seq") and change all steps (all sequences, including Main/Setup/Cleanup) to turn off "Record Results". It first saves a backup copy of the sequence file, makes the changes, then save
    s the modified sequence file. You can enhance this script to work for more than one sequence file by using Microsoft's FileSystemObject.
    The VBScript uses a DLL I created, which exposes the TestStand 2.0 Engine object as an ActiveX DLL. Before you can run the VBScript, you will need to register this DLL:
    regsvr32 TSEngine.dll
    Then, the VBScript can be executed just by double-clicking it. Hopefully this helps get you started toward creating an automated way of solving this problem!
    David Mc.
    National Instruments
    Attachments:
    ts2seqfiles.zip ‏4 KB

  • Report Painter - Format group for columns in more than one section

    How do have different decimals for columns in different sections.
    For. e.g I have three sections
    one for quantity (I do not need decimals)
    two for dollars (I do not need decimals)
    three for formula dollar upon quantity (I need to have two decimals)
    I made format group 0 (with no decimals) for first two sections and format group 1 (with two decimals) for the last section.
    4.6c does not consider format group 1 and makes every section look alike with format group 0 i.e, no decimals.
    How to overcome this?

    Anders,
    I replied earlier but after reading you post several times I realized that I probably misunderstood what you want. This is what I now understand. You have several resources, each of who may work on various parts of design tasks, assembly tasks, and test
    tasks. For example, let's say your resources are Joe, Bill & Tom. Joe is assigned to a design and test task, Bill is assigned to an assembly and test test task and Tom is assigned to a design task, an assembly task and a test task (Tom is very versatile).
    You would like to see a report showing just the assembly tasks and the amount of work each of the three resources is assigned on those tasks.
    Assuming the above is a correct interpretation, you will need to employ three processes, some VBA, grouping and filtering.
    1. First, designate a custom text field for group identification (e.g. use Task Text1 to enter "design", "assembly", or "test" for each task)
    2. In order to use grouping and filtering effectively,  you will need to translate the Task Text1 information to the Assignment Text1 field. To do that, go to the MVP website at: http://project.mvps.org/faqs.htm, and run the macro in FAQ 37.
    3. Now go to the Task Usage view and set up a group with Text1 as the first group by element and Name as the second group by element. Check the box to group assignments and not tasks. Then select "assignment" for field type of the second element
    (i.e. Name).
    4. Apply the group
    5. To show only the work hours for each resource in a specific group, autofilter on the desired group. Note, if you do not run the macro to populate the Assignment Text1 field with the Task Text1 field, the filter will yield nothing.
    Hope this helps
    John

  • Report error: ORA-01422: exact fetch returns more than requested number of rows

    I am getting this error in tabular form which is to be populated by selecting an item called week description in that page through a dynamic action.
    In main table I have two primary keys and so two foreign keys is detail even though it is not a type of master detail form.
    when I select week description item and related records in tabular form to shown.But it is giving baove error.
    In main table there  two same records ,in that records user name is different that defines the unique ness of record.

    Hi,
    2709643 wrote:
    Please update your profile handler with some meaningful name
    I am getting this error in tabular form which is to be populated by selecting an item called week description in that page through a dynamic action.
    In main table I have two primary keys and so two foreign keys is detail even though it is not a type of master detail form.
    when I select week description item and related records in tabular form to shown.But it is giving baove error.
    In main table there  two same records ,in that records user name is different that defines the unique ness of record.
    It is difficult to tell you the exact solution with the given information.
    please create a sample on apex.oracle.com that helps us to investigate the problem and give you appropriate solution.
    Regards,
    Jitendra

  • Reports not getting generated for more than 100 records

    Hi,
    On 8.1.1.1 with BI Publisher 10.1.3.4.1, some of the Reports are not running when it has more than 100 records and throwing error.
    Below are the some of the specific errors captured in XMLP log
    EAITransport EAITransportDebug 4 00000df64e7130a4:0 2011-09-15 18:25:54 *** HTTP response Headers from Data Send request:
    HTTP/1.1 500 Internal Server Error
    Date: Thu, 15 Sep 2011 12:55:17 GMT
    Server: Oracle Containers for J2EE
    Connection: close
    Content-Type: text/xml; charset=utf-8
    Transfer-Encoding: chunked
    ObjMgrLog Error 1 00000df64e7130a4:0 2011-09-15 18:25:54 (soapbinding.cpp (564)) SBL-EAI-04304: Unknown part ':oracle.apps.xdo.webservice.exception.OperationFailedException' for operation 'uploadReportDataChunk' exists in SOAP message.
    ObjMgrBusServiceLog Error 1 00000df64e7130a4:0 2011-09-15 18:25:54 (outdisp.cpp (209)) SBL-EAI-04308: Operation 'uploadReportDataChunk' of Web service 'http://xmlns.oracle.com/oxp/service/PublicReportService.PublicReportServiceService' at port 'PublicReportService' failed with the following explanation: "oracle.apps.xdo.webservice.exception.OperationFailedException: java.io.FileNotFoundException
    Please let me know what would be the reason for this issue?
    Thanks in advance for your help.
    Thanks

    Are you using 'PublicReportService'? Check the integration for Siebel Reports 8.1.1.1 and BI Publisher 10.1.3.4.1 the port 'PublicReportService_v11' is specified. Did you import this WSDL as directed?
    i.e., export from BI Publisher http://<host>:<port>/xmlpserver/services/PublicReportService_v11?wsdl
    Not certain this is the cause but I have not got the same issue.
    Edited by: user1634268 on 27-Sep-2011 10:38 - did not read the original error correctly first time

  • Prohibited entry if travel more than 2 weeks

    Hi All:
    Does anyone know if there is a setting that can be configures that would stop an employee from entering an expense report if the trip start date is more than 2weeks prior to the current date?
    The business has asked this question, because we have some employees who do not enter their expenses in a timely manner. With this configuration, we might be able to encourage them to get their expenses entered sooner.
    thanks

    Hello,
    As per my knowledge there are no such settings in Config. We can surely do coding to get such business requirement.
    User the exit EXIT_SAPMP56T_002 to put the business logic. I have done the same check for the future date in my system and it works.
    Hope this help you!
    Thanks,
    Vaibhav

  • In Firefox sync can you have more than 2000 history pages sync to the Firefox Home app (for idevices)?

    I set up Firefox sync today with Firefox 4.0b7 (Firefox 4 Beta 7) and my ipod touch (Firefox Home app). I got it to sync and it synced almost everything except for my history. It did sync 2000 pages of my history but I checked and I have way more than that. So I wanted to know: Is 2000 pages of history the limit for syncing?

    @kalos
    Uninstalled everything PA, also uninstalled mangler which was the only thing that depended on PA. It didn't work anyway.
    No pulseaudio --kill command so I couldn't run.
    Checked systemd journal and there is no mention of PA this time.
    Checked top, and grepped ps aux and there is no PA there either.
    I also rebooted the machine completely just to make sure. However VLC and HTML5 have the same incompatibilities.
    _ vlc Videos/anime/fmab/01.mp4
    VLC media player 2.1.5 Rincewind (revision 2.1.4-49-gdab6cb5)
    [0x1bc30f8] pulse audio output error: PulseAudio server connection failure: Connection refused
    [0x1af4118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
    Fontconfig warning: FcPattern object size does not accept value "0"
    Fontconfig warning: FcPattern object size does not accept value "0"
    Fontconfig warning: FcPattern object size does not accept value "0"
    Fontconfig warning: FcPattern object size does not accept value "0"
    [0x7fb604001248] main vout display error: Failed to resize display
    But the video and audio did work until I ran some HTML5 video, after which the audio worked, and then I opened it again and it didn't work...
    @nomorewindows
    I see. That's too bad. At least we're not alone.
    Last edited by Greduan (2014-11-14 01:34:29)

  • PDFA 1b Dictionary with more than 4095 entries

    Hi,
    I am trying to create a PDFA 1b complaint document using a word document.  Acrobat does create a PDF A document but when I try to verify complaince with PDFA 1b using the preflight option it reports error as " Syntac problem: dictionary with more than 4095 entries".  How do I solve this problem?
    Thanks

    Sorry for the split, but the editor messes up the code if I post such a long message.
    The APPLY CHANGES button triggers an event I catch in the following way:
    FORM user_command USING r_ucomm LIKE sy-ucomm
                      rs_selfield TYPE slis_selfield.
    * Calculate sel_lines.
      DATA ref1 TYPE REF TO cl_gui_alv_grid.
      CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
        IMPORTING
          e_grid = ref1.
      CALL METHOD ref1->check_changed_data.
      CASE r_ucomm.
        WHEN  'ZAPPLYCHANGES'.                
          REFRESH mod_lfa1.
          LOOP AT it_lfa1 INTO wa_lfa1 WHERE sel = 'X'. "to get a table of the modified rows
            APPEND wa_lfa1 TO mod_lfa1.
          ENDLOOP.
    Here I can see that the ZZVMDCUI field is not changed for every line, even if I have modified it. And also, SEL gets always the value of the FIRST LETTER (obviously, since it's a flag) of the ZZVMDCUI modification I made.
    This sounds to me that actually my report see the SEL flag as the only 'editable' field; I can write contents in another editable field but the only modified one is just SEL (which is the first).
    Can you please give an hint on that ? Thanks in advance

  • How to create a table cell occupy more than one row using PDF.

    Hi,
    I want create a pdf report,which contains a table cell occupied more than one line.
    just like html language: <rowspan = 2>
    merge cells in one row is allowed,we can use merge cells command(like colspan in html).
    but how to mege cells in one column?

    Hi,
    I want create a pdf report,which contains a table cell occupied more than one line.
    just like html language: <rowspan = 2>
    merge cells in one row is allowed,we can use merge cells command(like colspan in html).
    but how to mege cells in one column?

  • Stock more than 48 month

    Dear Master
    Anybody can help me how to get the report for all stock having ageing stock more than 48 month?
    What is the T Code I can use?
    Thank you
    paritz, the newbie in SAP

    Dear All
    When I run MB5m, it does not show anything, please let me know which scope of list I must select in order to get the more than 48 months stock.
    MB5B can give me the information of posting date, however I can't understand, which qty I can assume it is the stock.
    paritz, the newbie in SAP

  • Spool generated more than 1

    Hi Expert,
    My functional assigned my program (subroutine entry) and my smartforms to output type in MB1B.
    I tried to posted MB1B, and the smartforms display correctly. But when i check in SP02 spool generated more than 1 for the same smartforms.
    Seems like the smartforms was called for several times (same with how many spool created) --> i checked in the code the smartforms was called one time only in subroutine entry.
    Maybe this information make you guys more idea:
    Before i forgot to clear my internal table in the print program (subroutine entry) that called the smartforms and the internal table was append.
    This what happened:
    1 smartforms = 1 page (itab 1 record)
    When i posted MB1B --> 2 spools --> 1 is 1 page (correct), 2 is 2 pages.
    1 smartforms = 2 pages (itab 2 records)
    When i posted MB1B -> 4 spools --> 1 is 2 pages (correct), 2 is 4 pages, 3 is 6 pages, 4 is 8 pages.
    What i try to show is, why the itab also append? Even i forgot to clear the itab should be 1 soubroutine entry called 1 time only every time posted MB1B right? so the itab should not be append.
    Now i clear the itab before call the smartforms.
    This what happened:
    1 smartforms = 1 page (itab 1 record)
    When i posted MB1B --> 2 spools --> 1 is 1 page (correct), 2 is 1 page.
    1 smartforms = 2 pages (itab 2 records)
    When i posted MB1B -> 4 spools --> 1 is 2 pages (correct), 2 is 2 pages, 3 is 2 pages, 4 is 2 pages.
    The pages correctly already, but why the spool still generated more than 1 spool?
    Any idea for the possibility why this happen?
    Best Regards,
    Victor.

    Hi Prashant,
    If let say inside smartforms got multiple loop? is it can cause multiple spool?
    I thought only if multiple call on the smartforms (not multiple loop inside the smartforms itself) will create multiple spool?
    Btw Prashant,
    If you see what happened when i forgot to clear my internal table.
    2 records --> become 4 records --> become 6 records --> become 8 records..
    What make me confuse is, this smartforms or the entry program that append that itab was called only by output type?
    Is it possible the ouput type itself that triggered the smartforms more than 1 time?
    Best Regards,
    Victor.

  • Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

    Hi,
    I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
    when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
    Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
    so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
    Could you please advise on this.
    Appreciate all and any help.
    Thanks,
    Divya

    Hi Divya,
    Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
    To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
    values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • Schedule Reporting doesn't work

    Morning all,
    I have a question regarding scheduling reports. I created two reports and set their schedule to:
    First Report
    1: Run Daily for 8 days
    2: Start from 29/07/2008 to 08/08/2008
    3: Specific recipients
    4: specific parameters
    5: Schedule time 22:30
    Second Report
    1: Run Daily for 31 days
    2: Start from 01/08/2008 to 31/08/2008
    3: Specific recipeints
    4: specific parameters
    5: Schedule time 22:30
    Both reports scheduling is set by going into Infoview and set the scheduling by clicking on schedule.
    I can see the scheduling is set properly because when I click on reschedule it showed the right settings however, it is not working.
    Well it worked for one day meaning I set schedule for the first report on the 29th and I recieved an email with pdf yesterday however, i didn't recieve anything today.
    I cannot see any error messages under Report server nor under History of Report Object.
    The report object history shows:
    29/07/2008 22:30   LabReworkDailyReport  steven  300.000; 359.000  Adobe Acrobat  Success  Reschedule 
         29/07/2008 22:30   LabReworkDailyReport  steven  300.000; 359.000  Adobe Acrobat  Recurring  Reschedule 
         29/07/2008 22:30   LabReworkDailyReport  steven  100.000; 202.000  Adobe Acrobat  Success  Reschedule 
         29/07/2008 22:30   LabReworkDailyReport  steven  100.000; 202.000  Adobe Acrobat  Recurring  Reschedule 
    This report only ran for one day but not running daily.
    where and what am I doing wrong please advise.
    Many thanks
    Kind Regards
    Jehanzeb

    Fixed!!!
    The Frequency should have been set to 1 day not 8 days. I was wondering what it was until I clicked on the Recurring link and saw it said
    Object Runs once every 8 days!
    I was like nooooooooo it should run every day!
    So changed it to 1 day and set it again and now it should work.
    Regards
    Jehanzeb

  • I have a work website the I sign into and check my schedule, etc. Sometimes it opens and other times not., it uses webConnect to open.

    I have a work website the I sign into and check my schedule, etc. Sometimes it opens and other times not., it uses webConnect to open.

    Hi, papineaubill!
    Welcome to The Canon Forums, and thank you for your inquiry!
    We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.  If you live outside the United States, please click here and select your country or region for your support needs.
    Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
    Thanks for choosing Canon!

Maybe you are looking for