Report using charts not work on non-development machine
Post Author: ftsoft
CA Forum: .NET
using visual studio report uses charts. works fine on development machine when I move the web app to a test machine which does NOT contain visual studio, the chart report does not worknote: other reports which only display data records work fine. the space where the charts should be displayed contain the following two lines CrystalReportViewer - CrystalReportViewer1 Error: Fail to render the page. any help would be appreciated
Solution suggested worked for me.
On my test server Crystal was trying to use the c:\temp directory to write the temporary images, my report always ran ok on the test server. On the live server CRW was running under with the ASPNET account and / or my own user account.
I ran FileMon and filtered on the aspnet_wp.exe process across both servers and ran the application up to the point of generating the issue. The FileMon output from the test server showed no issues we as the output from FileMon off the live server showed an access denied message.
I gave access right to the relevant accounts on the relevant folders on the live server and the report ran fine.
Similar Messages
-
Hr report using pch not working
I am trying to create a report using logical database pch.here is the code
TABLES: objec,
gdstr.
INFOTYPES: 0002,
1003.
GET objec.
LOOP AT p1003
WHERE begda LE pc-begda
AND endda GE pc-begda.
write: / p1003-abtel.
ENDLOOP.
but p1003 is not filled with value .
Anyone pls help me outdid you include start-of-selection and end-of-selection?
example:
TABLES: objec,
gdstr.
INFOTYPES: 0002,
1003.
start-of-selection.
GET objec.
LOOP AT p1003
WHERE begda LE pc-begda
AND endda GE pc-begda.
write: / p1003-abtel.
ENDLOOP.
end-of-selection.
Warren
Message was edited by:
Warren Clements -
Reporting using SSRS not working - logon session does not exist
Hello All,
After installing the 'reporting site system role' and configuring (using MS technet reference guides), I see the report folder under my Monitoring-> reporting->reports folder;
When I click on a report and 'run', I get the following error:
"the default value expression for the report parameter 'usertokenSIDs' contains an error. A specified logon session does not exist. It may already have been terminated"
details:
System.Web.Services.Protocols.SoapException: The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist. It may already have been terminated.
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Microsoft.ConfigurationManagement.ManagementProvider.SmsException
The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist. It may already have been terminated.
Stack Trace:
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
System.Web.Services.Protocols.SoapException
System.Web.Services.Protocols.SoapException: The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist. It may already have been terminated.
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Stack Trace:
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
The account I'm using is a domain account with 'full' permissions to compliance security role. I also verified the individual object level permission and it holds good. I'm not sure what I'm missing here.
Any help on this is greatly appreciated. thanksI talked to a member of the product team and they agree this is not a solution. He has not heard of this issue before and STONGLY recommends that you contact CSS for support. This is the only way this is going to be fixed permanently.
It is my guess that if you ever apply a service pack 2 or other updates to CM12, this problem will re-occur, again this is my guess this will happen again.
Remember that if it is a bug then there is no charge for the support call.
http://www.enhansoft.com/ -
Schedule Reports using Calendar not working
I am using a calendar to schedule reports
this scenario works:
calendar run date = 18.5.2010
shcedule report > recurrence > start date = 18.5.2010
this scenario doesnt works:
calendar run date = 20.5.2010
shcedule report > recurrence > start date = 18.5.2010
the reason i setup a calendar is because our reports need to be run on different dates every month but it only seems to work when the start date (recurrence tab) is the same as the run date - how to fix this ???Please, this thread is almost two years old.
Your question has been responded to here:
http://supportforums.blackberry.com/t5/BlackBerry-Curve/can-t-use-my-calendar-help/m-p/1739907
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Plug-in not loaded on Non developers machine
Hi,
We are implementing an acrobat plug-in using VC++.Net (VS 2008) MFC Dll application, here we are referring a C# dll for hosting Infragistics WPF grid on the VC++ dialog(User interface). We created C# dll and plug-in application and added C# dll in acrobat.exe folder, Now the application works fine in our developer machine, but the same application is not running on Non-developer machines, We added all dependent libraries(Presentation core, Presentation Framework, Windows Base, C# dll for WPF grid, InfragisticsWPF3.DataPresenter.v10.2.dll, InfragisticsWPF3.Editors.v10.2.dll, InfragisticsWPF3.v10.2.dll, in the Non developer machines too, still it is not working there, what could be the problem, is there any more libraries we need to add? or any settings we need to change, please let me know.
Thank you,
palakshaUsually that happens when you don't have the language runtime stuff on the other machine.
Not a PDF/Acrobat issue - but a build and windows one. -
File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13
File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
ThanksI hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print -
VS2005 Crystal Report Print Report Button is not working on Windows 7 x64
Hi There,
My application is written in VS2005 C# on x86 machine. It runs smoothly on XP pro and Vista x86 machine.
I deployed the same to windows 7 x64 machine with CRRedist2005_x64.msi and found that the Print Report button is not working.
So, I re-compiled my application to x64 target platform, and reinstall the application to the same machine. But nothing changed. I have surf for answer over the web but nothing found.
Please help urgently. Any helps is much appreciated. Thks in advance.
Edited by: chanpyvivian on Mar 26, 2010 11:14 AMI follow your instruction as below:
1) download the sample app vbnet_win_printtoprinter.zip to dev computer and compile it to .NET 2005.
- Run from my dev computer
- Click "Print Report" button
- Error message display - please see below
The error was due to the default printer name hard coded in the program was not found. I have edited to my printer name and it can be printed out with no error.
2) Use a "saved data" report so that you do not have to worry about database logon.
can't find the "saved data", please elaborate
3) Then copy the exe to the 64 bit box and try to print using this sample app.
-do you mean copy the exe to the 64 bit computer for testing ?
ERROR Message
CrystalDecisions.CrystalReports.Engine.InvalidArgumentException:
Invalid printer specified. ---> System.Runtime.InteropServices.COMException (0x80000201):
Invalid printer specified.
at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal)
at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value)
at CrystalDecisions.CrystalReports.Engine.PrintOptions.Copy(PrintOptions src)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_FormatEngine()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
at PrintToPrinter.Form1.Button1_Click(Object sender, EventArgs e) in C:\Crystal\CRNET\vbnet_win_printtoprinter\vbnet_win_printtoprinter\Form1.vb:line 91
OK
Edited by: chanpyvivian on Mar 30, 2010 6:18 PM -
this photo illustrate how that (Substitution Variables) not working in "SQL Developer" Environment :-
http://www.imagehosting.com/show.php/1555180_ddddd.PNG.html
any solve for this problem ?????!!!!!!!!!!There is a dedicated forum for SQL Developer related questions
SQL Developer
I should admit however, that query you have provided ( with substitution variables) works like a charme in my environment (SQL Developer 1.1.0.23 build 23.64)
Best regards
Maxim -
Why does Server Monitor not work with non-Xserves?
Does anyone know why Server Monitor does not work with non-Xserve computers? We acquired a Power Mac for a server, based on there being no apparent difference except for the obvious. Turns out there are some differences after all.
Do Power Macs lack some hardware components or is this just a software thing?God question, unfortunitly I dont have the answer but I would also like to know why the software only works for X-Serve....Is there any 3rd Party Software that is similar to "Server Monitor"?
Thanks -
Change password on the first use - does not work
Change password on the first use - does not work.
Created a user and specified 'Change password on the first use' - when user logs in - the 'Change password' window does not pop- up.
Please advise.(APEX 4.0.2) I am running into this same issue - if you don't set the password expiration and locking to 'Yes', the user gets into the app without being asked to change the pw.
When you do set expiration and locking - after the user logs on with their temporary password, it does take them to the change password page (4155:50) but the username is blank. Because the username didn't get to the page the old password will never match and you get the "Invalid password" message.
What am I missing? Anyone successful doing this?
Simple application, default authentication, no javascript, HTTP_SERVER, no ssl.
Thanks,
Steve -
Group Policy not work in some client machine.
Hello All,
Existing environment is AD 2012. gpupdate /force command does not working in some client machine. And it's occur randomly. Error shown about 15-20% of client machine. Please suggest. Hopefully this time get reply from community.
The Error:
User policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller
has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
Computer policy could not be updated successfully. The following errors were enc
ountered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.Thanks for your reply. basically this error occurs with in same location as well as branch location. i have check event log in AD but not got any specific error. AD health status is ok. AD to AD synchronization also working well. All the client machine running
on windows 7 64 bit and few of them are windows 8.
Please suggest. if you need any event log for analysis i can send you.
Thanks
I recommend you examine the event logs upon an affected client machine. Specifically, look for the surrounding events on that machine (both System, and Application logs), for the hours previous and the hour after.
The time period may vary according to your environment (e.g. what is expected/normal for your environment, your configured GP refresh cycle-time).
e.g., are there network drops, or power drops, or system crashes, restarts at the similar time.
if it's a laptop, is it wireless? Was there a transition from wireless to wired operation?
Is there VPN in use?
If you are able to compare with another machine (I would encourage that), to understand what "normal" looks like in the logs, so that you have some kind of baseline data for comparison.
Other checks, maybe confirm that the machines are updating as required (have the relevant WindowsUpdates etc), and consider if some security/protection/firewall software might be interfering with normal Windows operations.
Also the potential for malware or virus, which can disturb many basic services (ensure a scan is performed and returns clean).
If you have the opportunity for an affected user to contact you urgently when the symptom occurs, check that the gpt.ini file is accessible from their PC.
e.g.: \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini
This file is hosted within the replicated SYSVOL share on your DC's, so check that it is accessible.
You might also validate the particular GPO this refers to, and check each of your DC's holds the correct copy of the files for that GPO GUID.
If you open that GPO, and perform a minor change to it (e.g. add a comment), then click Apply, OK, this should cause the GPO contents to replicate an updated version (be cautious, depending upon the nature of that GPO !!!)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Total using SUM not working on Account field on Lead History report
Hi,
I have a report based on Lead History on which I need to use the SUM of a field that is under the Account.Custom Number/Integer. This basically is a report of leads along with some fields from the account the lead is associated with. The SUM on that field works fine when I try it on another report off the Account History object but does not work when used on the report off the Lead History. It just shows the value of the field for that record instead of the total of the field for all the records displayed on the report. I am guessing that the issue has to do with the query going off the Lead-Account relationship because of which it treats each relationship as one resultset and totals the field values for just that relationship.
Any ideas on how to accomplish this would help very much. Can a field on one report be referred from another to achieve this?
Thanks in advance for your help!
Regards,
MadhukarHi again
Just checked a similar report test I did a while ago, and my query is:
SELECT c001 MyText, TO_NUMBER(c002) MyNumber
FROM HTMLDB_COLLECTIONS
WHERE COLLECTION_NAME = 'ATD'
So, you should use TO_NUMBER(c002)
Andy -
SQL Developer: View menu selections Reports and Connections not working
Downloaded latest SQL Developer May 9 updated version and my dropdown selections from the View menu for Connections, and View Reports do not work. However, Snippets does appear when selected. Hate to lose some of the User Defined reports I had created. Any help would be appreciated.
Don't know if I get what you're saying: the entries Connections and Reports from the View menu don't work?
On top of the connection tree, if you get one, aren't there the two tabs with these options?
If you're unable to view the whole tree, you're installation would be corrupted. Install from scratch in a separate folder, first without migration to see if that resolves the issue. Then you could do the same with migration to retrieve all previous settings and connections.
K. -
My Labview Report generator is not working with 2013 excel version
Hi All,
My report generator tool kit which was developpend using labview 2011 was workign with excel 2010...after that i installed 2013 excel and the code is not working..
Do i need to enable some setting to work with excel 2013.
Basically this generator tool will copy the charts from excel and paste in power point...Please let me know.
Thanks,
HareeshAh, I understand now - I had assumed you were using the NI Toolkit.
If you're not using the report generation toolkit, did you write your own VIs for communicating with Office or are you using a different toolkit? If you're using ActiveX to communicate with Office it may be that the ActiveX API has changed for Office 2013 - you will probably need to modify your program for the new calls.
Since it wasn't as obvious as I thought with the report generation toolkit, it would help if you posted some code to try and understand what might be happening. Are you getting any errors in your application when you try to use Office 2013?
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets -
Suppress embedded field blank lines in Crystal Reports XI is not working
Hi,
We have a text box in a Crytal Reports XI report which has address information in it as follows:
These are individual fields from the database. We check the "suppress embedded field blank lines" option for the text box and preview it in the designer and the suppression works as expected in that when the unit field is blank the whole address line isn't suppressed. However when we run this report using the Report Viewer control in a VB.NET 2005 application the whole address line is suppressed when the unit field is blank.
This appears to be a bug in the suppression logic when the Report Viewer is used to view a report. While yes we can embed a formula into the address line this adds extra maintenance and confusion which is not necessary as it works as expected in the report designer.
I have seen others which are having a similiar issue and the only suggestions are to create your own suppression using formulas, etc. which is only a bandaid and is not the best solution as the suppression works as stated in the designer but not in the viewer embedded in an application. Please indicate if this is a known bug and if this issue has been addressed and fixed in a new merge module.
We are running Crystal XI 11.5.0.313 for the report designer and have deployed the needed dlls to run the reports with our application using the CrystalReports11_5_NET_2005.msm merge module.
Thanks in advance for any assistance in resolving this issue!Hello,
Moved to .NET SDK forum.
Upgrade to XI R2 SP 6, you are using the original release:
https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
And the distribution files are for Visual Studio version of Cr, not R2 build.
https://smpdl.sap-ag.de/~sapidp/012002523100013451312010E/crxir2_fp64_server_ins.zip
Or
https://smpdl.sap-ag.de/~sapidp/012002523100013451332010E/crxir2_fp64_net_mm.zip
Don
Maybe you are looking for
-
Using different content with template tag (struts)
I developed a page according to the examples on the following link. http://jakarta.apache.org/struts/api/org/apache/struts/taglib/template/package-summary.html my problem is, that i want to use different pages as content. How can i do this?? do i nee
-
How do I disable Quicktime for being my default player for .avi files?
When I click on a .avi file, quicktime always tells me it's unable to open it because it needs a plugin. So I use VLC media player b/c it's hassle free. When I open an avi file, I select the "always open with" option when I choose VLC. Unfortunately,
-
Lenovo X220 and low volume [specially in Linux]
Hi everybody, i've googled this issue and found it affects other users, but didn't find any solution. Problem is the audio level of my Lenovo X220 is very low, in the sense that there must be zero noise in the room to be able to hear the sound. I fou
-
Configure Base Station from either of (2) diff. partitions
I setup the Base Station from partition (A) and everything is working. I then bought a new internal drive and installed 10.4.0. on partition (B). While booted on partition (B) when I selected the network, no Connect button in Internet Connect Airport
-
If I restore an iPhoto library, do I lose my current photos?
If I do an iPhoto 11 restore from my time machine, do I lose current photos?