Report with more than 600 kb image - BO Server getting Out Of memory Error

Hi,
   We have a report which displays images and size is above 600 KB.We are getting an "Out Of memory" Error while previewing this report in Business Object Server.
In another situation we tried by giving a dynamic path to the OLE object, but the report is not showing error. We are not able to view the image whose size is more than 600KB
Notes: 1. Image is stored as a BLOB  in Oracle Database
           2. Connection used inside the report is OLEDB
           3. UNIX Environment
Regards,
Sathish

Please re-post if this is still an issue to the Business Objects Forum or if you have a valid support contract create a case on line.

Similar Messages

  • Report with more than 500 rows

    I have a report with more than 500 rows and i donot know the total number of records returned from sql query before hand. Is there any way to dynamically set the MAX ROW COUNT in the report - layout and pagination.
    Thanks a lot
    Sudha

    Hi All,
    The main problem for the scenario is that....Say you first create a SQL query based report with setting the row per page 15 .Now after the region is displayed if u go through the report attributes of the page and change the no. of row per page and apply changes the same will not going to reflect in the report display page.
    For ur case just select the no. of page u want to show while creating SQL Query based report region say 1000 and after creating the region go to the report attributes -> Layout and Pagination -> Max Row Count : 9000 (say).
    I have solved the problem after creating 700 rows and the all rows displayed in the page fine........If u have further issue plz revert back to me.
    Thats solve ur problem i think.....
    Thanks n Regards,
    ROSY

  • Report with more than 30 columns

    XML Pub Gurus,
    I have a requirement where I need to create a table layout with proper spacing for more than 30 columns and I asked this question in Open World XML Pub team and they responded to my question as "The page size in word has to be increased to allow to add those many columns". I was satisfied with the answer without knowing that Word will not allow more than 22" long in landscape. So, I am puzzled with the answer in Open World.
    So, could somebody please give me guide lines to create this type of report for more than 30 Columns. This is very common requirement for us to report some of the stuff from the db.
    Thanks in advance
    Ram G

    What do you want your final destination format to be? I'm thinking you'll probably want to go out to HTML or Excel. I would think that would be the only place where you could read and use a report with more than 30 columns.
    Here's an idea if you want to go to excel and if you are using the 10.1.3.2 Enterprise (standalone) version.
    1. Create your query with as many columns as you want.
    2. Don't create a layout at all
    3. Launch Excel Analyzer.
    4. From within Excel, build your report based off the downloaded data (for example add a pivot table).
    5. Upload your excel Analyzer template back to the server
    This template can now be scheduled and delivered like normal templates or updated with current data directly from within Excel.

  • Reports with more than 100 columns

    I am using Apex 3.2. I am using a classic report with more than 100 columns. So to use the custom heading in the report, I exported the page,did modification in exported sql file and imported back.
    But when I am passing the parameters from a input screen for the first time either it is showing the all data avilable in the database or with only header. If I do the refresh in input screen and try it then it is working as intended. I am updating at the below loaction of the page.Let me know if I have to update anything more in the sql file.
    declare
    s varchar2(32767) := null;
    begin
    s := null;
    wwv_flow_api.create_report_columns (
    p_id=> 200100535534034253 + wwv_flow_api.g_id_offset,
    p_region_id=> 2003453533453 + wwv_flow_api.g_id_offset,
    p_flow_id=> wwv_flow.g_flow_id,
    p_query_column_id=> 157,
    p_form_element_id=> null,
    p_column_alias=> 'XYZ',
    p_column_display_sequence=> 157,
    p_column_heading=> 'XYZ 123',
    p_column_alignment=>'LEFT',
    p_disable_sort_column=>'Y',
    p_sum_column=> 'N',
    p_hidden_column=> 'N',
    p_display_as=>'WITHOUT_MODIFICATION',
    p_pk_col_source=> s,
    p_column_comment=>'');
    end;
    /

    Hi,
    Its just a general thought and I realize you know your application and user community better I do, but do you think your users are going to be very happy when they are presented with a report with more than a hundred columns? Have you considered maybe presenting the data in some sort of rolled up form from which the user can then drill down to the data they are particularly interested in. Also, I'm sure your LAN administrator would be happy not to see 100+ column by x number row reports being regularly shipped across the network.
    Also, 100+ column reports suggests tables with 100+ columns which are probably not designed in a very relationally compliant way. I find that good DB design usually results in applications that have to make less compromises, such as hacking export files in order to fool the API into making ridiculous, unsupported and unsupportable compromises.
    Just a thought..................
    Regards
    Andre

  • DIAdem report with more than 3 signals

    Hi everybody!
    How can I create a report with more than 3 signals  as input. The DIAdem report accepts only 3 signals as Input.
    In my opinion this is an very easy question but I could not solve it during a few hours!
    Thanks in advance,
        Manuel123

    Thank you for your answer!
    But I have still some problems.
    According to your help I have connected eight of the signal-boxes to the connector. After that it is possible to connect up to eight signals to this sub-vi. Great!
    But now I want show all these signals in the Diadem report, for this reason I created a new report-layout (see attachment) and wired the path of it to the "report layout file" - input. Unfortunately Diadem uses still a layout with just two signals and even if I open my own layout in Diadem there are only two data-lines listed in the "Data Portal: Internal Data" - panel.
    Where is my failure?
    Regards,
       Manuel123
    Message Edited by Manuel123 on 08-29-2007 10:00 AM
    Message Edited by Manuel123 on 08-29-2007 10:01 AM
    Attachments:
    man.TDR.zip ‏11 KB

  • I want to create a report with more than  64 column's.

    I want to create a report with more than 64 column's. I have generated Query the XML.When I tried to create a template for the report.I have Inserted the colum's Wizard and finish it throughing error message. "you cannot create atable with more that 63 coloum's "

    Hi ,
    Can u Check the below thread
    More than 63 columns in rtf template

  • Oci error in report 6i in reports with more than 1000 pages

    hi
    in a report that has more than 1000 page output , run in report 6i while formatting pages an error occurs:
    OCI error.==>SELECT NAME,
    what this means?
    please help me.
    CAROL.

    in reports that i know number of pages for example 1100 pageswhile formatting pages 150-200 this error occurs.
    Did you get the error if total report pages < 1100?
    indeed in another report with about 3500 pages output this error not occurs. Any diff. of setting/limits etc. between your two reports?

  • Trying to create Mouse over effect with more than one show image appearing in same cell

    Firstly this is the link to my test page: http://www.design39.co.uk/indexhope.html
    If you roll your cursor over the top left logo (the D&S) one it displays an image to the left. If you roll your cursor onto the next logo (Netnotts) it fades away again. Great. Exactly what I wanted and created in CSS (well done me as I don't normally do much with CSS but the new CS4 has very forced it).
    What I am trying to create is: When you roll onto the Netnotts logo, not only does the original image to the left disappear but a new relative one appears, this is to be for all the logos. In CSS I can only create it as far as I can. I have thought about using AP DIV tags to do it which would obviously work but to keep it in the right place, I would then have to align my whole website to the left instead of centered like it is and to be fair, that's not particularly pleasing to the eye as this is my own portfolio of work.
    I can do flash  to make 'pretty things' but have no idea about actionscript and java is way over my head but I am sure with some help I would be able to get it together as the that particular effect, although done in CSS, is running javascript I noticed.
    Many thanks in advance.

    A relative positioned layer? does this mean it knows how far to be away from the table as a pose to an absolute positioned layer which is lay 15px from the left? I need to be able to keep the positioning as its key, cant have the layer popping up in different places pending on the users browser size.
    I posted the question on a few forums and I got the following back: http://www.design39.co.uk/bla.html
    which is exactly what i wanted it to do but have no idea how to insert java script into my page; Further more, that was done in layers not table cells.
    Any ideas?

  • How to generate a report with more than one elements in the same graph??

    I need to generate a custom report in OEM GC 10g featuring volume total capacity information and volume free capacity information both in the same graph on (Y-axis) and time on the (X-axis). I could generate only the total volume capacity graph individually, but how can the combined graph and the graph for free capacity be generated...

    Is it your values in parameter NO separated by coma? And is it
    parameter in where clause?
    Do you want something like :
    from table
    where s_no in (NO) ?
    If is answer "yes" you can create lexical parameter in report.
    You can write in report sowething like:
    select a.field1, a.field2,.....
    from table a
    &COND /* this is if is condition only one line after "from".
    if you have more lien after where then you will put this &COND
    in line where you want to have your multivalue.
    Then in your trigger in form you should write:
    sc_no := 'where a.sc_no in ('||:searchlist.c_no||')';
    ADD_PARAMETER(PL_ID, 'pamametername', TEXT_PARAMETER, sc_no);
    /* again this is if you have only one line with WHERE ili
    conditions */
    or you will write:
    sc_no := 'and a.sc_no in ('||:searchlist.c_no||')';
    ADD_PARAMETER(PL_ID, 'pamametername', TEXT_PARAMETER, sc_no);
    It will substitute line in which is your conditions with
    multivalue.

  • Keeps Crashing out runs so very slow with more than say 50 images

    I useually come home from a shoot with around 2000 photos, I normally put theses into one directory in Lightroom called 'Temp Photos', this is so that I can go through and delete the duds, after that I will go through and rotate any that are slightly off square, and then finally I will Colour and Tone adjust what is left, normally ending up with 1500 to 1800 photos.
    The problem is this, I need to reload Lightroom after the import, the main reason for this is that when I load up the Task Panel it stats that Lightroom is using up around 780Mb RAM and around 99% CPU, and the system just grinds to a hault, that is if I can get Task Panel to even load, Lightroom seems to be so memory hungry that I normally can not get any response from the system at all, and have to resort to holding in the power button on the PC to shut it down and then boot from cold again.
    I need to do this about 10-20 times when working on this amount of images, as the more that I work with it the slower it gets, some times I can guage it right and I can quit out of Lightroom and restart it before it hangs the system.
    The system is a Dual Xeon 2.8GHz running XP SP2, 2Gb RAM, a 512Mb Video Card and load of Hard drive space, So why is this software SO memoryu hungry, and what Can i do to speed it up.

    > what Can i do to speed it up.
    When you import, make sure you render standard previews.
    After that, go to grid mode and the smallest available cell size. Look at the cells. In the upper right corner you'll likely see three dots. Wait for them all to disappear and then page down. Repeat until you get to the bottom. When you are done, restart LR.
    Let me know if that speeds your performance.

  • PS2013 / SQL 2012 - A SQL Reporting Services Report with more than one filter connection looses connection in a site template

    Hi,
    I created in a sub site not linked to a project to become a site template. I inserted two SQL Reporting Services reports web part that require the same two dates for an interval and the name of the project in a page of the site and connected
    to three filters, two for date and one for text and I got the page below (only one of the reports shown).
    Look that all parameters needed by the report are linked to the filters above the report.
    Then I save the site as template with all contentes and assign it to the EPTs and create a new project or replace the site of existing project site. What I got is:
    Look that the filter connection of the dates are lost (in both reports) and the order of the filters changed.
    I deleted and retried to connect the filters in diferent order and language, but I did not get any success.
    The BI Central Data Connectivity resource is activated in the template site and in the site collection.
    Is there any solution for this?
    Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

    Hi,
    Correction: this happens only with "Date Filter" web part!
    Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

  • Running a  BEx report with more than one query in Background

    I am having a workbook with 2 queries .This workbook needs to be executed at a particular time every day and then save this file to a application server location .
    The file name has to dynamic, as everday a new file has to be created with some date stamp.
    Please let me know the steps/ ideas to achieve this

    Sudhakar,
    are you sure that it has to b a workbook ? running queries independently can be done .. am not sure if a workbook can be scheduled to run...
    One alternative is to use APD - have the queries run and populate two ODS and then have these ODS in a multiprovider and have one query output for the same - seems to be a very longworkaround...
    Another option is to have the queries executed in an ABAP programme and then have the results in an internal table and push both the result sets into an excel sheet ad save it in the application server.
    For reading queries in ABAP there is a functionmodule for the same .. something like RSDRI_INFOPROV_READ .. I am not too sure of the name but there is a function module for sure..
    Hope it helps..
    Arun
    Assign points if it helps..

  • Answers Request -- PDF with more than 600 pages

    Ist that possible?
    At my IE will not do this 150 pages are possible but not more.
    What can I do?
    Regards,
    Stefan

    Check the PDF settings (if any) in your instanceconfig.xml
    You can set a range of values, but the one you're probably looking for is;
    "MaxVisiblePages"
    Although I think the default value is 1000, so I'm a bit confused why it's not working. Give it a go anyway.
    A.

  • Reports 9i Graphs with more than one query..

    Hello,
    I am converting my 6i reports to 9i reports. On my graph reports with more than one query, when I invoke the graph wizard it changes the value of the src to the wrong query automatically. When I run my report, I am getting the error REP-0069 Internal Error rwlib-1: REP-6219 Column (Column Name) not in given cursor hierarchy. Although it's a pretty easy fix to go into the graph settings in the property palette and change it back, it is extremely frustrating. Has anyone else ran into this problem and did you find a permanent fix?
    Thanks,
    Laura

    Hi Laura
    One workround would be to create a new query in the Data Model that includes desired fields, and then source
    chart to the new group.
    FYi, bug2527100 was filed on this issue and is already fixed. The fix would be available in 9i Reports 9.0.2.2 patch. Reports 9.0.2.2 patch is scheduled to be released on Mar 05 2003 (tentative date).
    Thanks
    The Oracle Reports Team

  • Problems deploying Windows 7 x64 computers with more than 8GB RAM

    SCCM 2012 R2 CU1
    Windows 7 x64
    We have a weird problem after upgrading from SP1 to R2 CU1. We have built a Windows 7 64 bit image with the latest updates (currently September 2014 updates). It deploys fine to all computers. But after some days – don’t know exactly – guess after 4-7 days
    - we start getting errors on computers with more than 8 GB of RAM. The errors just start out of the blue. We didn't change TS, image or driver package.
    The error shows in 3 different ways – depending of the computer model.
    1) BSOD – STOP 0x000000F4. Disk error.
    2) Task Sequence error 0x87D00269 when installing the first Application in TS. The error seems to have something to do with Management Point not found.
    3) Task Sequence simply stops after installing CMclient. No errors - it simply stops.
    For instance we get the BSOD on the Lenovo ThinkCentre M93p. But on the ThinkCentre M83 we get the TS error 0x87D00269. M93p and M83 uses the same driver package. They consequently  fail every time after the error has begun. If we reduce (remove physically)
    the memory to max. 8GB of RAM, they successfully run the Task Sequence.  We get the above errors on both Lenovo and HP machines with more than 8GB. 
    I made a copy of the production TS and started testing. I created a new driver package for M93p/M83. It contains only the NIC drivers. Now M93p an M83 successfully finishes the TS. Adding sata or chipset or MEI/SOL drivers to the package I get the 0x87D00269
    error on both m93p and M83. At least not the BSOD on the M93p ;-)
    Tried setting  SMSTSMPListRequestTimeout to 180 in the TS. Also tried putting in a 5 minute break before installing the first Application in the TS. Also tried putting in SMSMP=mp1.mydomain in the installation properties for the CMclient. It is still
    the same problem.
    Investigating the smsts.log on a computer with the 0x87D00269 error.
    Policy Evaluation failed, hr=0x87d00269 InstallApplication
    25-09-2014 08:59:59 3020 (0x0BCC)
    Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_654E40B7-FC55-4213-B807-B97383283607/Application_d9eea5a0-0660-43e6-94b8-13983890bae2'=''InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
    EvaluationJob complete InstallApplication25-09-2014 08:59:59 3020 (0x0BCC)
    MP list missing in WMI, sending message to location service to retrieve MP list and retrying. InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
    m_hResult, HRESULT=87d00269 (e:\qfe\nts\sms\client\osdeployment\installapplication\installapplication.cpp,1080) InstallApplication
    25-09-2014 08:59:59 3020 (0x0BCC)
    Step 2 out of 2 complete InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
    Install application action failed: 'SCIENCE PC Guide'. Error Code 0x87d00269 InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
    Sending error status message InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
     Setting URL = http://mp1.mydomain, Ports = 80,443, CRL = false InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
    Investegating the 0x87D00269 error on the siteservers Status Messages Queries is weird.
    Install Static Applications failed, hr=0x87d00269. The operating system reported error 617: You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that
    you have not previously used.
    Hopefully this is a bug in translating the errorcodes? Just to be sure I checked all the SCCM serviceaccounts and none of them have expired passwords.  And again why only on computers with more than 8GB RAM.
    Anyone else had problems rolling computers with more than 8GB og RAM?
    Why does this happens after a few days? To begin with, it runs just perfect and then starts failing on all machines with more than 8GB. Without a change in TS, image and driverpackage. We have seen this pattern for the last 3 month after
    updating our image with the latest Windows Updates. It all started after updating from SP1 to R2 CU1.
    Why does it only affect machines with more than 8GB RAM?
    How to get rid of the 0x87D00269 error?
    Seems to be somehow related to driver installation mechanism in SCCM in combination with Windows 7 64 bit, +8GB RAM and SCCM 2012 R2 CU1 or perhaps just R2.
    Any help or hints would be appreciated!
    Thanks
    Anders

    We have the same workaround, using a x64 boot image resolved all our issues with WinPE 5.0.
    Machines with >4GB of RAM
    Lenovo ThinkPad T540p failed applying drivers with 80040005
    Black screen/white cursor issues intermittently
    No updates from Microsoft, they are still looking through the logs, but we have updated our boot images and all is well now. Our case it still open with Microsoft, they are researching the logs.
    Daniel Ratliff | http://www.PotentEngineer.com

Maybe you are looking for

  • OSX can no longer find USB 3.0 external drive

    My macbook air was able to read from my USB 3.0 external drive a couple weeks back when I last plugged it in prior to yesterday. Yesterday, when I plugged the drive back into the computer though, my machine was unable to detect the drive at all.  It

  • Sync photos from new computer to iPhone 4

    I have a new laptop that I will use to sync my iPhone 4. I have installed iTunes but it will not let me sync all my "photo" folders since my iPhone is already syncing with my old computer's iTunes.  I can not get the old computer iTunes to unsync wit

  • DR570KU no signal during dvd playback

    JUST started to have the following issue: during playback of purchased dvd's the picture stops and on my NEW TV and I see "no signal". So far the only way to continue watching the dvd is to start the dvd over and fast forward to the point I lost the

  • Subcontracting Handling ByProducts

    Hi I created a BOM with two components and there is one component as negative qty which is generated as By Product. When I am creating a subcontracting PO with Item Category "L" I am able to expolde the BOM with Two Components only and the negative q

  • Is it possible to open a cvx file with adobe Illustrator

    Hello Is it possible to open a cvx (Canvas) file with adobe CS6 illustrator?