Reporting commitments for IO and Cost Centre

Hello Help!
I need your expertise please ..
When reporting on a cost centre's commitments in Y_DEV_17000159, the commitments posted to the internal order (which is also attached to the cost centre) does not appear in the report.
However, when I do a report on the cost centre only, it shows commitments except the IO. And when I execute a report on the IO, it shows all IO commitments.
Is there a way to report on both IO and cost centre commitments in the one report?
P.S. the order does have Statistacal Postings enabled.
Many thanks for you help on this!
? Vanessa ?

Hi,
When you post to Real internal Order, and Cost Center.
The Internal Order will take precedence always. Cost center posting will become statistical.
To your question "whether IO and Cost Center co-exists in one transaction?"
Yes, very much, many cases this happens normally for transactions related to marketting campaigns etc
Hope this would clarify your question
Best Regards
surya

Similar Messages

BI FI and Cost Centre Reconciliation

Hi
I have a requriement to create a GL reconciliation report between Finance and Cost centre data, i have a multi sitting over the relevant cubes and the data is coming through.
The report is as follows
|_FI Total__|___Cost Centre Total__|__Difference_(should = 0)
GL Account | | |
For the cost centre data the report should bring through the data where the cost element = GL account in the row,
ie GL Account - 60000
FI Total - GL Account - 60000
CC Total - Cost Element - 60000
Difference - FI - CC
Any ideas on how i can do this or if this is possible?
Thanks
Josh

Hi Harshal
Yes i was able to create this report, i had to create an infoobject ZFI_GLCE with 0GL_ACCOUNT as a ref. characteristic.
Then i created a cube and had transformation going from YCOOM_C02 (CO-OM: Costs and Allocations (Delta Extraction)) to the cube where i mapped the Cost Element to ZFI_GLCE and then also had another transformation from YFIGLO02 (General Ledger: Line Items) to the cube mapping the GL Account to ZFI_GLCE.
Could you further explain the problem you are having with the GL Accounts?
Josh

Creating control area,Company codes and Cost centres

Hello experts,
I want to create a new controlling area,company code and cost centres for a new client. I know the transaction codes/menu path, but I would like to get an exact guidance for creating these. Experts pls comments on this, I want exact procedure for all not only tcodes.

Hi,
This is the work of FICO Consultant.
However, Refer to this website for creating Creating controlling area, company code and cost centres.
Creating controlling area, company code and cost centres
http://www.sap-basis-abap.com/sapco.htm
Also refer to SAP Best Pratices
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
V08: Basic Controlling
Additionally refer to this book
www.amazon.com/Configuring-SAP-Essential-Financial-Controlling/dp/0782125972
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M

Real IO and Cost Centre

HI all
JV posting with real IO and Cost Centre. Which will take precedent?
Internal order and Cost centre, could these two co-exist in one transaction?
regards
Jana

Hi,
When you post to Real internal Order, and Cost Center.
The Internal Order will take precedence always. Cost center posting will become statistical.
To your question "whether IO and Cost Center co-exists in one transaction?"
Yes, very much, many cases this happens normally for transactions related to marketting campaigns etc
Hope this would clarify your question
Best Regards
surya

How to get G/L account and cost centres from ECC to SRM...

Dear All,
How to get G/L account and cost centres from ECC to SRM...
Please let me know the steps...
Thanks
Ravi

Hi
GL account - You can define in SPRO- Cross application settings--Account assignment ->Define GL account for product category and account assignment category.
or you can use BADI BBP_DETERMINE_ACCT.
In Organisation Strucute - You can Map the backend cost center via KNT cost center attribute .
Regards
Muthu

MB5L Report Discrepacy for Material and Stock Account Currency

I have found in the MB Report Discrepancy for Material and Stock Account Currency. Why is this happening? Why is there a variance between total price in materials and stock account? Anyone please help me. I'm abaper but now been pushed to do logistic. I need help for this issue.

Hi,
Here's some information from help. Variances can occur for the following reasons:
You have entered postings to the stock account manually.
The stock account includes not only stock postings, but also other postings. In this case, you should check the account determination in the Customizing for Valuation and Account Assignment. Make sure that the stock accounts are used solely for the transaction key BSX (stock postings).
Check Account Determination - OMWB
The account assignment for the stock accounts (transaction key BSX) was changed during productive operation; the respective stocks, however, were not deducted from the old account (movement type 562) and posted to the new one (movement type 561).
Cheers !

G/L account for issue to cost centre-FERT

Hello friends,
here I have an issue,
when I am running the transaction MB1A with mvt type 201,two G/L accounts getting updated, one is inventory that is assigned in OBYC , in transaction BSX.
Another G/L account is 'for' issue to cost centre,' where it is assigned.
Can somebody give me the solution?
regards,
Seetaram Functional consultant.

Hi Friend,
You should assign it to OBYC Account Assignement. GBB - VBR (Internal Goods Issue such as Cost Center or Order). Also check OKB9. Whether cost element has been assigned to Cost Center.
I hope this found useful to you.
Regards,
Jigar

Creating/Copying a Work Centre,also a Production Scheduler and Cost Centre.

Hi All,
I am trying to create a new work centre based on the settings of a previous one? First of all,how I can do this?
Secondly,after I have created the new work centre (having copied being copied from another),I need to create a new production Scheduler and Cost Centre? How I will be able to do so,also?Will the Production Scheduller and Cost Centre assignments fom the old work centre be copied,too,or I will need to create/copy these from scratch?
All help greatly appreciated,will award points to all useful answers.
PAPJ1.
Edited by: PAPJ1 on May 20, 2011 11:01 AM

Hello,
You can create a new work center by copying an existing work center. in the cr01 screen in the copy from column put the plant name and Ref. work center name and put enter. all the existing data will be copied to the newly created work center. no need to create new assignment to Production Scheduller and Cost Center.
Hope it helps.
Regards
Alok

Asset and cost centre

hi,how can i create my own asset and cost centres?

Hi Lakshmi,
Use BAPI_FIXEDASSET_CREATE to create assets and BAPI_COSTCENTER_CREATEMULTIPLE to create cost centers.
Regds,
Younus
<b>Reward Helpful Answers!!!</b>

Reset commitments for expected delivery costs

Hi guru's,
after i have implemented note 733733 I finally got SAP to reset commitments after setting the 'Final Invoice' indicator in the PO.
Only it does not reset the commitment for any expected delivery costs that occur on the purchase order.
Can any one advice how to reset commitments for expected delivery costs when no delivery cost invoices are to be expected?
Kind regards,
Roel

Hi,
If you refereed the OSS Note 427944 correctly it explains how the shipment cost can be transferred to delivery cost based on some pre-requisite.
Like the value for PO should be >0
Like the service agent is involved during shipment liability, then there should be cumulative transfer for each value which will update based on shipment cost if PO value is "0".
The shipment cost will be delivered to all delivery items based on weight.
If you want to enhance this then you need to use the enhancement V54KSFRC to update the values as per your requirement.
Rgds,

Use of different production versions for MRP and costing

Dear PP Gurus ,
We have a scenario in which there are multiple production versions for a particular product .The MRP run as welll as costing run considers only the production version 0001.
We would like the system to consider different production versions for MRP and costing ..that is 0001 for MRP and 0005 for costing .
Is this possible ... if yes ...Kindly suggest the config and master settings for this to happen .
Ram ~

Dear Ramakrishna,
For doing the costing for a specific production version use CK11N,under quantity structure tab key you
can assign the prod.version which is to be used for costing purpose.
While taking MRP if you want to consider the particular Prod.version,assign the demand to the
correct prod.version under schedule line tab in MD61.
Otherwise the system always picksup the first prod.version for MRP.
One more alternative is you have to lock the other prod.versions if you want the system to consider a
particular prod.version.
Check and revert back.
Regards
Mangalraj.S

OBIEE Analytic Report Requests for Financial and HRMS Analytics

All
Does anyone know where i can get a complete list of the available reports(requests) for Financial and HRMS Analytics. I have an incomplete copy from a seminar i attended, but cannot find where to get a complete list.
Thanks in Advance.

Hi,
Please tell me which version you have use. 10g or 11g
if you are using OBIEE 11g then, New-> under Published Reporting -> Report.
if you have .rdf file then upload it and saved.
and simply create dashboard, drag and drop report into dashboard.
Regards
Prashant

Gl account no and cost centre relation

Hi friends,
I need to know there is any function module available to get cost centre from gl account number or any other way to get that?(requirement is to add cost cente in a report copied from f.08 standard report).
Regards,
Shans
Moderator: Please, avoid asking basic questions

Hi,
In FBL3N, give the following details:
GL Account Number
Company Code
Fiscal Year
Date Range,
Execute the screen, it will show you the line item details, there you can enable field Cost Center by Ctrl+F8,
The table for GL Open Item is BSIS and for cleared one it is BSAK
Hope it is clear, assign pts if helpful
Br,Vivek

Activity Types and Cost Centres

Our PP is not yet live now.
While going through the system settings, it is found that many activities (approx. 15 for indirect expenses also) are planned in the Production Cost Centres.
However, these activities are not included in the master data of the Work Centre. Only one activity type is mentioned there for machining.
Then, what is the purpose of other activity types planned if they are not mentioned in the Work Centre ?
Is there any other way these activity costs will appear in the Cost report ?

Hi,
You are almost on the right line, activity quantities will be triggered in the cost center report based on the routing master and through the confirmation from the production orders.
For the creation of the work center - Activity Planning KP26 is required. Cost center/Activity
where we can plan the activity quantities.
Prior to that KP06 is required to plan the primary cost combination of (Cost Element/Cost center/Activity Type) where we can plan the cost.
Based on the above information we can calculate the plan price - KSPI
Based on the confirmation from the production orders activity quantities will be updated in the center report. cost will be updated with actual postings in the cost center.
So that you can calculate the actual activity price.
Please look into the blog for better understanding:
Expenses Analysis and Its splitting - Part 1
Regards,
Pavan Kumar Arvapally

Open PO report with GL's and Cost Centers

Hi Gurus,
Is there a report that already exists where we can run open purchase
orders not received for non-inventory items that pulls the quantity,
price, GL account code, and cost center account code?
Thanks
Anusha

Hi,
May be the requirement will not be met in a single report.Please check the t code ME2K with selection parameter as we101 which gives you the open POs for that cost center or range of cost centers.
EKPO gives price details.
and check the table EKKN for GL account and cost center for that PO.
If you want open POs check the T code ME80FN.
Regards,

Reporting commitments for IO and Cost Centre

Similar Messages

Maybe you are looking for