Reporting Financials EHP3 - Problem with 0FIGL_M30

Hi All,
  We are using the multiprovider 0FIGL_M30 for the Balance Sheet, P&L and Cash Flow Statements in SAP BW. When we activate the multiprovider 0FIGL_M30, I see the Infoproviders 0FIGL_V30, 0FIGL_C30 and 0FIGL_V31 under the multi provider.
But when I go to the SAP Help Document, it doesn't discuss about 0FIGL_C30 at  all, which gives me an impression that 0FIGL_C30 is not required and it should not be included in the multiprovider 0FIGL_M30. Even the scenario installation guide for EHP3 doesn't give any reference of the cube 0FIGL_C30.
  If I have also the cube 0FIGL_C30 in the multiprovider and when I ran any of the reports, I see the data is duplicated and it is coming from the cube 0FIGL_C30. The cube 0FIGL_C30 is fed from the cube 0FIGL_V30 through a full DTP. 0FIGL_V30 and 0FIGL_V31 are filled by a Function Module with the Multiprovider 0FIGL_M20 as source. I tried to run the reports on 0FIGL_M30 with no data in the cube 0FIGL_C30, but the reports do not display any data. If I fill the cube and run the reports I see that the data is duplicated.
  Did any one face the same situation. Please throw some light on this from your experience. I could hardly find any documentation on this cube 0FIGL_C30.
Thanks in Advance,
Madan Koka

Hello, did you hear further on this issue or get a resolution?
Babak

Similar Messages

  • Report generation toolkit problem with office 2000 and office XP

    Hello, I am having a problem with running my vi after it is compiled with application builder. The dev machine is an XP box and the targer is windows 2000. I included _Excel Dynamic VIs.vi and _Word Dynamic VIs.vi from the office 2000 section of the install cd (for the report toolkit) in the compile but did not include those files for XP. When I run the application on the target machine (2000), the reporting functions call Excel just fine and the program does not come up with any errors. The program however, is not loading the approprate template and inserting the approprate data. Did I leave some neccessary files out of the compile? Thanks in advance!
    Greg
    Gregory Osenbach, CLA
    Fluke

    Hi Acer,
    The recommended procedure in your case is to install Microsoft Office 2000 on the development machine and then reinstall the LabVIEW Report Generation Toolkit. When the toolkit is installed, it will check for the current version of Office and install the corresponding VIs to support it. The VIs include different ActiveX calls according to the version of Office. Therefore it is not enough to change the support manually without having the correct version of Office installed first.
    However, I would recommend that you just try to run your executable on a machine that has Office 2000 installed. The difference in the ActiveX API for Office XP and 2000 is not that significant, so your application might work perfectly on an Office 2000 machine. If you try to run the executable on a machine with Office 97 installed I'm willing to bet my right arm that you will experience errors.
    Good luck Acer!
    - Philip Courtois, Thinkbot Solutions

  • Report Conversion Tool - problem with logging in table OBJ_G_MIGRATION

    Hello Community-Members,
    since several days I am searching different BO-Communities for a solution, but I didn't find any threats about my problem.
    I am new to BO XI R3.1 and I want to convert deski-reports with the report conversion tool.
    I tried it directly on the server-machine and all is ok (report is converted inclusive the logging in the audit-table OBJ_G_MIGRATION).
    When I try it on my client-machine, the conversion is made successfully, but there is no result in the audit-table.
    On the client-machine, I use the same connection like on the server machine and on both machines, I am logged on (in the report conversion tool) with the "Administrator"-user.
    Has anyone an idea? Could it be a problem of user-rights in the Oracle-DB?
    kind regards
    Guenny

    Hello Denis,
    thank you for your reply.
    From my client machine I can successfully test the connection to the Audit-DB. With non BO-Tools like "SQL Tools1.4.1" I can also connect to that DB.
    After your reply I have tested once again and I have found something else strange.
    If I convert a deski-report, and the conversion-status is "not converted", the Audit-DB is written (for example: error-text = "document cannot be read" / workaround = "remove protection password if set").
    But when I convert the same report together with an other report, which will result in "partially converted", nothing is written to the Audit-DB (same effect as when I convert only reports with status "partially convertet").
    regards
    Guenny

  • Crystal Reports XIR2 performance problem with Sybase IQ 15.2

    Dear all,
    we are facing a performances pb with Crystal reports and Sybase IQ 15.2, Does anyone have a similar issues and have a solution as ( design , or sybase IQ configuration...)
    regards,
    Eric

    Wow, not so much info please... for starters:
    Is this in the designer or in an app?
    Depending on the above, the following may, or may not apply:
    What are you comparing the performance to?
    What is the exact version of CR or what CR Service Packs have you applied?
    If in an app , what your development language?
    What CR SDK are you using?
    Web or Win app?
    How are you connecting to the database (OLE DB, ODBC, etc .)?
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Report Suite/Analytics problem with Pro Account

    I have a Pro account and want to set up the Application role so I can actually build my app and insert a shared secret for the free subscription my app offers.
    However, after I've specified my app name and shared secret, I leave the report suite fields blank and click submit, but it still says 'Report Suite is required to set up analytics'. I then can't go any further - it won't allow me to save the shared secret. What is the issue?
    I thought this only applied to Enterprise subscribers??

    Yes, Pro customers should not have to enter a report suite name and a company name since Pro customers use a shared report suite. They may be an issue with your account.
    It's best if you contact DPS Gold support for this. The contact information is in DPS Dashboard under 'Manage and Contact Gold Support'.

  • Sql report on item - problem with commas in the string

    I have a simple report that groups all the Job Titles entered on our database.
    I pass the job title to an apex item and then on a second page list the records that match that job title using:
    and ed.ede_job_title = :P35_JOB_TITLE
    If there is a comma in the job title the report returns the records that match the string up to the point the comma appears not the full string.
    So 'Project Manager, Operations' matches all the 'Project Manager' records.
    Also when there is a leading space in the job title the report displays the jobtitle without the leading space.
    Apologies if this is answered elsewhere, I did search.

    Check the actual URL up in the location bar. Your comma may actually be dropping out there, because it isn't encoded such that in value commas can be differentiated from delimiters, so the fields aren't lining up in the URL properly.
    When you go to a page that takes in parameters for assignment in the link, it has 2 fields. The first is the comma separated list of the item names on the page to assign, which wouldn't contain commas in their names. The other field in the URL is a comma separated list of values to be assigned to the previous list. Since these values aren't encoded, the comma in the value is picked up as delimiter and not a part of the value. I have an example I can load up to apex.oracle.com if you need.
    -Richard
    Edited by: rwendel on Aug 13, 2009 11:51 AM

  • Hello, I would just like to report the little problem with the apple store. When I try to download an app it loads for about 2 seconds and then it stops downloading! I don't know what's wrong

    Hi, when I try to download an application the app stores downloads it for about 2 seconds and then it stops downloading it! I don't know what's wrong?

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... (But can take Longer..)
    Release the Buttons...
    If no joy...Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

  • Reporting Financials

    Hi Experts!
    This is regarding Pre requisite in ECC 6.0 for BW data source related to FI Modules.
    I was looking at 'SAP Help' for Reporting Financials (EhP3).
    http://help.sap.com/saphelp_nw04s/helpdata/EN/30/44593167d447198995bed770d70ddf/frameset.htm
    It says that for using a new data source say 0FI_GL_40, the pre requisites are:
    1. SAP Enhancement Package 3 for SAP ERP 6.0 in all source systems
    2. Activated the Reporting Financials business function
    I am quiet unclear about the pre requisites. Can anyone guide me (step by step) in 'How to check whether these pre requisites are already available/configured/installed in the R/3 system'?
    Thanks in anticipation.
    With Best Regards
    S Murugan

    Hi,
    I basically want to check in  R/3 if the following requirements are fulfilled in R/3.
    1. SAP Enhancement Package 3 for SAP ERP 6.0 in all source systems
    2. Activated the Reporting Financials business function
    Any Updates?
    Thanks n Regards
    S Meyyappan

  • Reporting Financials - Pre requisites

    Hi Experts!
    I was looking at 'SAP Help' for Reporting Financials (EhP3).
    http://help.sap.com/saphelp_nw04s/helpdata/EN/30/44593167d447198995bed770d70ddf/frameset.htm
    It says that for using these (0FI_GL_40....) new data sources the pre requisites are:
    1. SAP Enhancement Package 3 for SAP ERP 6.0 in all source systems
    2. Activated the Reporting Financials business function
    I am clear about point number 1. But I am not sure about point 2 (what it refers to).. Any Ideas?
    With Best Regards
    S Murugan

    Hi Oscar,
    Thanks for the update. I want to see whether this feature has been activated in a particular client before talking to their FI team.  I am looking for step by step information to see whether this has been actiavted in the client environment.
    Pls see if u can provide more information.
    With Best Regards
    S Murugan

  • Problem with include and relative path in jsp

    Precompile jsp with wlappc in 9.2, I got the error "The include file was not found" when the jsp use <%@ include file="../includes/dataEntry/code_error.html" %>
              This code used to work with 8.1. I notice that someone has report the same problem with 9.0 and you have patch for it. Is it fix in 9.2 or do I require a patch as well?
              Thanks,
              Khuemy

    When you precompile, can you say "Keepgenerated=TRUE". It might help you track
              down the difference with the URL. You should only get a 404 error when the
              resource is not found at runtime, which is independant of when you compile. The
              difference should be in how the URL is compiled.
              Chris
              ali wrote:
              > I am using WLS 6.0 SP1, when I use relative path in <jsp:forward> in my JSPs
              > it forwards ok if I am using directly JSPs but if I am using pre-compiled
              > JSPs (and have proper servlet-mappings
              > in my web.xml), I get 404 error with the relative-path, if I change it to
              > absolute path with pre-compiled JSPs it forwards ok , then.
              > any ideas why this is so?
              > thanks,
              

  • Networking problems with OS 10.4.6

    My server is a G3 iMac on OS 9.1 networked with a G4 on OS 10.4.6. Prior to installing 10.4.6 I could connect with the G3 iMac. Now I cannot.
    Are there other reports of connection problems with 10.4.6?
    Anybody have a solution?
    Thanks.
    trl
    iMac G3   Mac OS 9.1.x  

    Point taken but this is not just a Quark question. I have been told that 10.4.6 has problems with Extensis X1.
    Kind of silly to put out thousands for a computer and not to have it work with certain programs.

  • "There is a problem with your device,We're sorry the device you connected may be damaged and cannot be activated for service. "

    My problem is after i did a restore on my 32gb ipod touch i now get a error on itunes that says "There is a problem with your device,We're sorry the device you connected may be damaged and cannot be activated for service. " Please help

    In the ipad discussion forums there apparently is a HUGE problem with people not being able to update to ios 4.3.3, it apparently locks up their devices and they are also getting the error "there is a problem with your device".... some are reporting the same problem with their ipod touch as well... it looks like it's a global issue
    The forum is in the ipad section under the title of "There is a problem with your device".
    I have dodged a bullet on this one since i have not updated my ipod's or ipad in the last couple of days.... i will hold off syncing to itunes until this issue is fixed... good luck, and spread the word if you can to get apple to listen

  • Has anyone else had this problem with their screen?

    This has happened to me twice, at random....................The background of the phone would go dark, and three bars approx 7 or 8 cm in width would appear running down the length of the phone.
    Background was a dark gray, the three bars were a darker gray almost black. 
    I called into Verizon just now and spoke to a CS rep and they transferred me to technical support.  They logged the problem, but I told them I didn't want to send my phone back, as they are on backorder already.
    Please let me know if you have had ANY problems or issues with your screen.  The lady in tech support said once Verizon has taken reports on any problem with -3- people, they send it onto Motorola for resolution.
    Thank you !!!!!!

    SavannahsMommy wrote:
    how long did your phone's screen stay looking like that?  Mine was only maybe 30 seconds and it jumped right back to normal.
    Will you please call Verizon and report the problem-they told me 2 more people and they would send to motorola for a fix.....
    The only problem I'm having now is the battery, I knew the life would be short, but give me a break......I started using my Droid X at around noon off and on and it is 2:25 here est and the battery indicator is on yellow already !!
    I installed the task killer but this is ridiculous.....
    I guess I should exchnage it because of the screen problem-I just knew the phones were on backorder and I didn't want to give it up yet, LOL......maybe the battery is defective too?  I do plan on buying an extended life battery to help out a bit.
    I bought online also. I exchanged at the store. Surprised they still had some left My battery life seemed ok.  But then again I didn't have it very long..

  • TS1702 I am having a major problem with a Z2 app. I have written to the three times and received no response. Is there somewhere to report this and at least get my money back?

    When Z2 did their first 5. Update, a message popped up saying you had to do the update. After doing so, another pop-up said to remove and reload the game. In doing so, all my progress/ purchases disappeared. I only updated on my iPad, not my iPhone, so the iPhone app is till on the "you have to install the update to play" status. I've written to Z2 three times with no response. I would at least expect a refund of the $ I have spent on the game.

    You bought an app but it did not work properly on your device. You can easily report problems with your iTunes Store purchases via the iTunes Store. Here is how:
    Launch iTunes > Choose Store > Sign in.
    Store > View My Account > Purchase History then Click the Report a Problem button.
    Fill out the form explaining the problem you are having.
    Submit the problem report and wait for a response from Apple, they usually respond within 24 hours.
    Notes:
    When Apple emails your invoice, there will be a link on the invoice. You may also click the “Report Problem” link next to the app that you are having issues with to report your problems.
    Problems with in-app purchases or free apps, report them here:http://www.apple.com/support/itunes/ww/
    Before reporting your issue, make sure that you followed these troubleshooting steps explained here.
    <Link Edited by Host>

  • Problem with Result Analysis report (KKAK)

    Hello Experts,
    I am facing problem with T-code KKAK, when I am executing this transaction (Results Analysis (RA) on sales orders creates the data for posting to the GL, depending on the sales order (i.e. WIP or COS) ) system is displaying/calculating for all sales order which are already completed (fully shipped and billed), this report displaying in 300 to 400 pages.
    My requirement is  .. is it possible to display only sales orders which are no completed. This will help alot.
    Please help me to solve this problem.
    Thanks
    Sudheer

    Hi,
    in the selection screen of KKAK in "Output options" there is a flag "display closed items".
    Uncheck this and ensure that all completely processed orders have status closed (CLSD).
    Thus they will not be reported anymore.
    BR Christian

Maybe you are looking for