Reporting pass/fail information from threads in Teststand logs

I am fairly new to Teststand. I am just getting started on threading techniques in TestStand. Previously, task A and B were running sequentially. To improve program run time, I am splitting the tasks into thread A and thread B. In the sequential version of the program, task B is running certain steps and logging to a Teststand log file. After I split the tasks into their threads, thread B does not perform the logging feature. Before the thread split, task B would log each error using
RunState.Step.Result.ReportText feature. This logging thread is the last step before thread A and B rendezvous. How do
I enable the logging in Teststand for thread B?

I'm not sure if you need the rondezvous or not without knowing your program design. It may not be neccessary. Any sequence call that calls into a new thread will need a Wait step if you want if you want it in the report. It sounds like you don't need the rendezvous without knowing any more information.

Similar Messages

WWI-server reporting - population of information from 1 substance

Hi,
I would like to include the CAS-number from each Hazardous Ingredient on one MSDS output (by using WWI-server concept).
The Hazardous Ingredients are maintained in the Specification Workbench and therefore the information is already available in the system. But is it possible to populate information from out of more substance propoerties or identifiers to one MSDS output (through WWI-server and MS-Word wizard tooling)?
Thanks.
Kind regards,
Roy Derks

Hi Roy,
Its not possible to print CAS numbers for all the Hazrad Inducers in a single document; coz the CAS number maintained in property trees of specification management for each specification; all the hazard inducers are assigned to DG clasifcation; and in each classification DG regulations are maintaned and the hazard inducers are assigned to each regulations.More than all, Hazard inducers are not maitained CAS numbers; but UN number is maintained;
In ur query you mensioned hazardous ingradient, if it is so pls let me know; I will check whether it is possible or not.
Regards,
Keshav

Help Creating A Link In An IR Report Passing The Value From A Different Col

Version 4.0.2.00.07
Hello,
I have an Interactive Report with a column that I need to create a link on but I need to pass the value of another column.
This report shows the Features of a particular Release. There is a select list for the Release that is selected and executes the report.
There is a column that indicates whether the Feature has a Commitment attached to it. If there is have that a link to another report that shows all the Commitments for that Feature by passing the FEATURE_ID which is also a column on the Feature report.
Query:
SELECT
      ,CASE WHEN ft.feature_id IN (SELECT cc.feature_id
                                   FROM customer_commitments cc
                                   WHERE ft.feature_id = cc.feature_id
                                  ) THEN 'Yes' ELSE 'No'
       END "Commitment Exists"
          ,ft.feature_id
FROM ....If "Commitment Exists" has a 'Yes', the 'Yes' is a link that will pass the FEATURE_ID to another report that will show the Commitments for that Feature. If the "Commitment Exists" has a 'No' then no link.
I was also wondering if the Commitment report could open in a seperate window and make it modal?
I hope this is clear and someone could help me.
Please let me know if it's not clear or more information is needed.
Thanks,
Joe

To accomplish this I would build the link as part of the value. So if Yes the Yes itself would be a link, if No is simply text as today.
It would look something like this:
SELECT
      ,CASE WHEN ft.feature_id IN (SELECT cc.feature_id
                                   FROM customer_commitments cc
                                   WHERE ft.feature_id = cc.feature_id
       THEN
        '<a href="f?p=&APP_ID.:NEW_PAGE:&SESSION.::::Pn_FEATURE_ID:' || ft.feature_id || '">Yes</a>'
       ELSE
        'No'
       END "Commitment Exists"
          ,ft.feature_id
FROM ....One problem with this approach is when you export the report (as a CSV for example). There are a few ways to handle this, one is to simply duplicate the column with clear text yes and no and set this column to be included on export and only visible on export. The other column, with the link, set it to no export.
The other option is to add another condition on the REQUEST value.
SELECT
      ,CASE WHEN ft.feature_id IN (SELECT cc.feature_id
                                   FROM customer_commitments cc
                                   WHERE ft.feature_id = cc.feature_id
       THEN
              decode(:REQUEST, 'CSV', 'Yes'
            , '<a href="f?p=&APP_ID.:NEW_PAGE:&SESSION.::::Pn_FEATURE_ID:' || ft.feature_id || '">Yes</a>'
       ELSE
        'No'
       END "Commitment Exists"
          ,ft.feature_id
FROM ....It seems that the link itself is getting replaced with a #. The link would look something like this:
'f?p=&APP_ID.:NEW_PAGE:&SESSION.::::Pn_FEATURE_ID:' || ft.feature_id
Hope this helps.
Oh and of course, in order for the link to display you need to change the Display Type to "Standard Report Column" otherwise the HTML will be escaped.
Thanks
-Jorge

What is the best way to open close and pass instrument handles from labview in teststand parallel model?

I have a number of test systems that use a parallel model with labview. We have a good number of instruments(PXI).
What is the prefered method for open,closing and passing instrument handles in teststand using labview?
Solved!
Go to Solution.

Hi,
No, Below is a bit from the Session Manager Help
Currently, Session Manager supports the following instrument session types:
IVI Sessions—Use an IVI session to obtain the C-based instance handle for an IVI logical or virtual instrument name. NI Session Manager does not support IVI-COM drivers at this time. When IVI-COM drivers are available, you can use an IVI session to obtain an ActiveX interface reference to an IVI-COM driver.
VXIplug&play Sessions—Use a VXIplug&play session to obtain a C-based instance handle for a VXIplug&play logical or virtual instrument name. Configure VXIplug&play names in the <VXIplug&play directory>\<Platform directory>\NISessionMgr.ini file.
VISA Sessions—Use a VISA instrument session to obtain a C-based viSession handle to a VISA resource or logical name. Configure VISA logical names in the <VXIplug&play directory>\<Platform directory>\NISessionMgr.ini file.
Custom Sessions—Use a custom session to create a data container object that shares ActiveX objects you create or other data between software components you write. Use the Attach and Get methods to attach data to and retrieve data from a session. A custom session does not initialize, close, or own an instrument handle. The data you share with a custom session does not have to be instrumentation related. You can create a custom session with any name you request.
Regards
Ray Farmer
Regards
Ray Farmer

Passing text information from sales order to purchase requisition

Hi
My requirement is in third party processing. I want to pass line time text in sales order to the purchase requisition created in a third party processing.
My question : is it possible in standard config setting?
If not, Is there any user exit to address this
please send us valuable inputs
Thanks
Sriram.

Dear Sriram,
Try this,
Go through this IMG path do the required settings
SPRO>IMG>Material Management>Purchasing>Purchase Requisition-->Texts for Purchase Requisitions.
-->Define Text Types here you can define the Text type same as sales order Text type for Purchage requesition .
-->Define Copying Rules -->Here you select the Text type(Newly defined) to which text type you want to copy the sales order text then click on Text Linkage -->New Entries in the New entries screen you enter
Sequence
Source Object as Sales order
Source Text
Fix as blank -Text automatically adopted in target object
Finally save the settings.
Now you create third party sales order system will copy the sales order text to the Purchase requesition
I hope this will help you,
Regards,
Murali.

Need Help to extract information from Windows Security Event log

Hi Everyone,
My challenge is to create a script that queries the Security event log for event id 4624 , logon type 2 and 10, then export the result to file, hopefully tab limited.
I need the time - date - User Account - Workstation - IP address - Logon Type.
I have had a go, checking out other advice from other questions, but i'm just not getting what I want.
Kind regards,
Andrew

A good point to start is get-eventlog with where clauses.
For example:
get-eventlog -log security | where {$_.eventID -eq 4624}
So you want to get the entire security log, and then filter it client side? (Some of these logs can be massive).
I would recommend Get-WinEvent with -FilterHashTable (Filter on the left) which will filter against the log directly.
http://blogs.technet.com/b/heyscriptingguy/archive/2011/01/24/use-powershell-cmdlet-to-filter-event-log-for-easy-parsing.aspx
You might have admin rights issues accessing the security logs.
You're right - my answer was only a first step to try "get-command *event" and eventually get-help.....

Need to pass information from MS access database to another prog

Hi,
I really need some help here...
I need to pass selected information from my database to another information.
I am able to select and display the infotmation but i am not sure how i can transfer the information to the next program. Can any one please offer me some assistance?
My code is as follow:
/* Getting data from PSM32 and displaying it *can work* */
import java.net.URL;
import java.sql.*;
import java.lang.String;
/** Application to create a Ganttchart * */
public class PSMdb
public static void main (String argv[])
//SQLQueryFormat a = new SQLQueryFormat();
System.out.println("\nEstablishing Connection - Pls Wait... \n");
/** Get Info fr database**/
try
     //Connect to the database specified in the URL
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     Connection con = DriverManager.getConnection("jdbc:odbc:PSM32");
     System.out.println("Connection Established.\n");
     //Create a SELECT statement object
     Statement statmt = con.createStatement();
     //Issue the SELECT statement
     String querySt = "SELECT Set, Name, Order " +
     "FROM PMETERS " +
     "WHERE Set = 'BRAKE.BAK' ";
     //Create and execute query
     ResultSet res = statmt.executeQuery(querySt);
     while (res.next())
          String Proj = res.getString(1); //get Proj Name
          String Task = res.getString(2); //get Task Name
          //Print statement
          System.out.println("" +Proj);
          System.out.println("" +Task);
     //Close Statement and Connection
     statmt.close();
     con.close();
     System.out.println("\nConnection Closed - Operation Successful.");
     catch(Exception E)
//Print out the Exception Error
System.out.println("Error:" +E );
}And yes there is another problem. I can compile and run the program in a C:\folder but when i open the document in a project workspace, i cant compile the above code. Can any one please offer me assistance?
Thanks a million.

To NanookOITheNorth:
Could you provide some more relevent information
about what the other program is and how data should
be transferred to it? API? Socket? File?was wanted to use the "return task" thing. Issit possible to use that?
To annie79:
my next program is supposed to retrive the events in the "task" field and display it in a applet. After retriving the tasks i will be getting the dates to produce the gantt chart. uses the jfree lib functions.
the code for the applet is as follow
/* original gantt chart program that can work*/
import java.applet.*;
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import java.util.Calendar;
import java.util.Date;
import org.jfree.chart.ChartFactory;
import org.jfree.chart.ChartPanel;
import org.jfree.chart.JFreeChart;
import org.jfree.data.category.IntervalCategoryDataset;
import org.jfree.data.gantt.Task;
import org.jfree.data.gantt.TaskSeries;
import org.jfree.data.gantt.TaskSeriesCollection;
import org.jfree.data.time.SimpleTimePeriod;
/** Application to create a Ganttchart * */
public class Ganttchart extends JApplet{
/** @param title , frame title **/
    public void init() {
        final IntervalCategoryDataset dataset = createDataset();
        final JFreeChart chart = createChart(dataset);
        // add the chart to a panel...
        final ChartPanel chartPanel = new ChartPanel(chart);
        // this size (500, 270) here doesn't matter cos this become the html control
        // how big u wan can change in the html code the width="800" height="600"
        chartPanel.setPreferredSize(new java.awt.Dimension(500, 270));
        setContentPane(chartPanel);
     * Creates a sample dataset for a Ganttchart.
     * @return The dataset.
    public static IntervalCategoryDataset createDataset() {
     //"Task" information should be retrived from the database to replace this current 1
        /*final TaskSeries s1 = new TaskSeries("Scheduled");
        s1.add(new Task("Write Proposal",
               new SimpleTimePeriod(date(1, Calendar.APRIL, 2001),
                                    date(5, Calendar.APRIL, 2001))));
        s1.add(new Task("Obtain Approval",
               new SimpleTimePeriod(date(9, Calendar.APRIL, 2001),
                                    date(9, Calendar.APRIL, 2001))));
        s1.add(new Task("Requirements Analysis",
               new SimpleTimePeriod(date(10, Calendar.APRIL, 2001),
                                    date(5, Calendar.MAY, 2001))));
        final TaskSeries s2 = new TaskSeries("Actual");
        s2.add(new Task("Write Proposal",
               new SimpleTimePeriod(date(1, Calendar.APRIL, 2001),
                                    date(5, Calendar.APRIL, 2001))));
        s2.add(new Task("Obtain Approval",
               new SimpleTimePeriod(date(9, Calendar.APRIL, 2001),
                                    date(9, Calendar.APRIL, 2001))));
        s2.add(new Task("Requirements Analysis",
               new SimpleTimePeriod(date(10, Calendar.APRIL, 2001),
                                    date(15, Calendar.MAY, 2001))));*/
        final TaskSeriesCollection collection = new TaskSeriesCollection();
        collection.add(s1);
        collection.add(s2);
        return collection;
     * Utility method for creating <code>Date</code> objects.
     * @param day the date.
     * @param month the month.
     * @param year the year.
     * @return a date.
    private static Date date(final int day, final int month, final int year) {
        final Calendar calendar = Calendar.getInstance();
        calendar.set(year, month, day);
        final Date result = calendar.getTime();
        return result;
     * Creates a chart.
     * @param dataset the dataset.
     * @return The chart.
    private JFreeChart createChart(final IntervalCategoryDataset dataset) {
        final JFreeChart chart = ChartFactory.createGanttChart(
            "Ganttchart", // chart title
            "Task",              // domain axis label
            "Date",              // range axis label
            dataset,             // data
            true,                // include legend
            true,                // tooltips
            false                // urls
//        chart.getCategoryPlot().getDomainAxis().setMaxCategoryLabelWidthRatio(10.0f);
        return chart;
}As for the "run the program in a C:\folder but when i open the
document in a project workspace, i cant compile the
above code. Can any one please offer me assistance?"The run time error that i get is "java.lang.NoSuchMethodError: main
Exception in thread "main" "
Please give me some leads on how i can cont to proceed?
Thanks a lot

Passing Information from UCCX call variables through trunk SIP to Astersik

Hi All,
We need to pass some informations from our UCCX 8.5SU3/CUCM 8.6.2a to our Asterisk Server.
This two PBX are connected by a trunk sip.
Is it possible to do it?I've read about sip header,but i've never work on it.
Is it possible with a javascript?
Could you please help us?
Thanks
Stefano

No. CCX uses JTAPI (CTI/QBE) to integrate with CUCM, not SIP. As such there is no mechanism for it to manipulate or add extra SIP headers. You would need to use one of the native scripting options (e.g. ODBC, HTTP GET/POST, SMTP) or write a custom Java class that can interface natively with the other application. Examples of this exist such as the excellent documents on SFTP, CIFS, and LDAP.
Please remember to rate helpful responses and identify helpful or correct answers.

Passing Information from one RS to another RS

How can we pass the information from one RS to another RS?

yes,from EM when I am testing the webservice it is returning the string properly .
In my ESB application I am calling this service thru a SOAP Service and I am using a FileAdapter to capture the result.Now to configure the RS shall i choose 'Generate WSDL from schemas' i.e. the request -reply option or 'Select Existing WSDL option'?I am choosing the first one.Now whn I am defining the rule there is a node mismatch in my source and target during mapping.When I am invoking the RS from EM i am getting some exception that "input is null".

Passing information from webdynpro to CATS system

Hi all,
I have a webdynpro application, and i'd like to pass on information from my application to the CATS system.
Can anyone throw some light on how to go ahead with this?
Kindly respond at the earliest.
Regards,
lisha

Hi Lisha.
I'm working on that, and y use the following bapis to manage catsdb data:
- BAPI_CATIMESHEETMGR_CHANGE
- BAPI_CATIMESHEETMGR_DELETE
- BAPI_CATIMESHEETMGR_INSERT
Change and insert bapis have a table 'CATSRECORDS_IN' that i'm filling from webdynpro before execute the bapis. In this structure are the fields of catsdb that can be inserted or changed. The delete bapi has 'CATSRECORDS' table that only need the 'COUNTERS' which is the key field of catsdb.
And i'm using the CATS_READ_TIMESHEET_DATA bapi to consult the data in catsdb.
This bapi has E_CATSD structure, in this structure is the data organized like in CAT2 transaction.
I hope it help u.
Regards.
Gregory.

Passing information from applet to java script of same browser

Hi
i want to pass some information from applet button click to same browser window html elements where applet exist. how it can be possible
Thanks
Dev

Use JSObject:
html file:
     <object classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
              height="0" width="0" >
        <param name="code" value="someApplet.class" />
        
        <object classid="java:someApplet.class"
                height="0" width="0"
                mayscript=true>
        </object>
        
      </object>
<LABEL id="lblOutputText">This text is the HTML text </LABEL>applet
// new class for jsObject!!!! compile this: javac -classpath "C:\Program Files\Java\jre1.5.0\lib\plugin.jar" someApplet.java
// since jaws.jar does not exsist anymore
// in 1.4.0 to compile: javac -classpath "C:\j2sdk1.4.0_03\jre\lib\jaws.jar" someApplet.java
// for msjvm use the -source 1.3 -target 1.1 option so the command looks like this:
// javac -source 1.3 -target 1.1 -classpath "C:\j2sdk1.4.0_03\jre\lib\jaws.jar" someApplet.java
import netscape.javascript.*;
public class someApplet extends java.applet.Applet {
    JSObject win;
    public void init() {
         try{
             win = JSObject.getWindow(this);
// you need win.eval("window.close();"); // to close the window. if the current window is not a popup
// opened by a parent with window.open than the user will get a waring, your next question probably will
// be "can I stop this warning" and the answer is simple: NO
             JSObject textBoxLabel = (JSObject) win.eval("document.getElementById('lblOutputText')");
             textBoxLabel.setMember("innerHTML", "<center><h1>Some text from applet</h1></center>");
        }catch(Exception e){
             e.printStackTrace();
}

Why does captivate 5 scorm 2004 change the pass/fail status when using complete/incomplete

SUMMARY: I am trying to use SCORM 2004 reporting but I am finding out ADOBE does not diffentiate between COMPLETE/INCOMPLETED and PASSED/FAILED variables in the SCORM 2004.
RESULT: I can not accurately get the passing/failing status from the course.
QUESTION: Is their anything I can do or does ADOBE have a patch they have release which will accurately report the passed/failed STATUS as well as the completed/incompleted status.
OTHER RESEARCH: I even attempted to post these "proofs" on scorm.com and they have something called "SATISFACTION TRACKED" to accomodate content creation systems (CAPTIVATE 5) which does not follow the standards of SCORM 2004.
BACKGROUND: the report status "Incomplete/Complete" and "Pass/Fail" under the publishing options for SCORM 2004 essentially mean the same thing when the CAPTIVATE COURSE sends setvar commands to the SCORM API... In other words the SCORM API receives the same exact commands when publishing in both modes. "THIS IS WRONG"
why is the wrong? IF REPORTING; incomplete/complete ; the CAPTIVATE 5 COURSE SHOULD NOT "change" the STATUS OF PASS/FAIL when attempting to report COMPLETE/INCOMLETE with 100% slide views.
DEMO #3> SHOWS THE PROBLEM
About DEMO #1 and DEMO #2> these are other reporting options I attempted with other problems arrising..so these images are just for supporting my original problem which is shown in DEMO #3...
DEMO 1 (REPORT STATUS has no affect on reporting):SETTINGS:
PASS: (PROBLEM)
Anything above Passing Score is not recorded to LMS (once passing is reached...no more bookmarks are recorded)
FAIL: (CORRECT)
Failure gets sent to the database on the last screen with "completed"
DEMO 2 (Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api):
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database
FAIL: (PROBLEM)
NOTHING GETS SENT TO DATABASE (stuck in final score screen forever)...because it says "INCOMPLETE"
DEMO 3:
Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database with a 90% passing with "completed"
FAIL: (PROBLEM)
LAST SLIDE SENDS "completed" but GETS SENT AS A PASSING SCORE??? even when it is a failure
(IN OTHER WORDS ADOBE CHANGES THE PASS/FAIL STATUS based on slide views...
this is WRONG ....REALLY WRONG becuase I am trying to report
"COMPLETE/INCOMPLETE" for 100% slide views
PASS/FAIL OPTIONS:
OPTION I CAN PURSUE?
SO WHAT CAN I DO? YES, I CAN TELL THE LMS...to COMPARE THE SCORE RECEIVED DURING A "COMPLETE" status...and then change the grade in the LMS based on the SCORE IN THE LMS...BUT THAT WOULD MEAN THE LMS COULD REPORT ONE GRADE and the COURSE COULD REPORT A DIFFERENT GRADE....and that would not be good.
ALL OF OUR COURSES SHOW THE STUDENT THE FINAL SCORE WITHIN EACH COURSE..
QUESTION TO ADOBE?
SO ADOBE when are you going to differentiate these two reporting options so that the PASS/FAIL OPTIONS ARE ACCURATELY REPORTED WHEN USING COMPLETE/INCOMPLETE?
MORE INFORMATION
HERE IS THE SCORM.COM "Satisfaction" adjustment (very last line) to accomodate inconsistent reporting in CAPTIVATE 5.
Thanks,
DOUG LUBEY OF LOUISIANA
www.douglubey.com
OTHER WEBSITES:
http://forums.adobe.com/message/3332035
http://forums.adobe.com/message/3122315
http://forums.adobe.com/thread/712502?start=50&tstart=0
http://forums.adobe.com/thread/800570
http://forums.adobe.com/thread/720121
SEARCH ENGINE REFERENCE:
CAPTIVATE SCORM SUCCESS_STATUS
captivate 5 scorm 2004 pass/fail is dependent on complete/incomplete
scorm 2004 captivate cs5 success_status incorrect
scorm 2004 captivate cs5 reports success_status incorrectly
scorm 2004 captivate incorrectly reports pass/fail
scorm 2004 captivate 5 incorrectly reports pass/fail
scorm 2004 "captivate 5" incorrectly reports pass/fail
captivate 5 sends a pass even when a failure is issued by the course using scorm 2004.
captivate does not work properly when working with completed status.
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT
CAPTIvATE 5 cmi.completion_status
and cmi.success_status does not work independently with scorm 2004. they both share the same definition. These two field were designed to help differentiate the difference between a passing or failing score and when the course is actually completed. WITH CAPTIVATE 5 they do not differentiate the two. COMPLETE means PASS and INCOMPLETE means fail..
I was trying to use "completion_status" as a way to determine when all slides were shown. So that I can send the final score (PASS/FAIL) the LMS after all slides were viewed and this was the absoluted score the student recieved.
2011 CAPTIVATE CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
2010 CAPTIVATE CHANGES SUCCESS TO PASSED WHEN COURSE REPORTS FAILURE
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
CPTX CAPTIVATE CHANGES cmi.success_status TO PASSING
CP5 WHY DOES CAPTIVATE SCORM SUCCESS_STATUS
CPTX WHY DOES CAPTIVATE CHANGE PASSING STATUS
CPTX CAPTIVATE SCORM CHANGES FAILING SCORE TO PASSING SCORE
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS MEANS THE SAME THING
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT

Hi,
Here's something I found in a similar situation... hope this helps!
After publishing your CP5 project as a SCORM 2004 zip file, unzip the file so you can get into the separate files. Open the imsmanifest.xml file with a text editor; I like using Notepad++. Search for the line starting with <imsss:minNormalizedMeasure>. The complete line will probably look like <imss:minNormalizedMeasure></imss:minNormalizedMeasure>, this is the line that is supposed to contain your passing score (at least for our LMS). So, if your passing score is supposed to be 80%, edit this line to be: <imsss:minNormalizedMeasure>0.80</imsss:minNormalizedMeasure> and save the file. Then select all the files and re-zip them, I use 7-zip for that.
I found one other weird thing that doesn't happen 100% of the time, so test it. In the example above, try to get a score of exactly 80% (or whatever passing grade you are using) and see if you get the correct status reported. I found I sometimes have to re-edit that line in the manifest file to be 0.79 so it correctly includes an exact 80% score. No idea why and you have to watch the number of questions in your quiz to make sure that works for you mathematically.
If this works or not, I'd recommend posting your results so others can get some ideas. Good Luck!!

Getting information from DB02 tcode in function

I have developed a report which retrieves information from DB02 and it show information on a Word document.
I have used functions for Oracle and SQL server databases, but at my actual landscape, I was using DB2 for AIX and I have not the knowledge how to pick up de information.
In my report I use functions to pick up data for DB02, fill up internal table and after that to show the result in Word document
In Oracle I use function
DB02_ORA_FILL_TD110
Is any function in DB6 for AIX I can obtain the same result??
Regards

I'm not an AIX guru but try, $ prtconf

Pass/Fail Assessments

I am using Captivate 3 and am looking for resources that can guide me through creating an assessment in a pass/fail mode. I have created assessments, and have created quizzes, but need to bring the two together to record a demonstration of a software package we use, then launch an assessment that requires the user to get XX percent of mouse clicks, etc. correct in order to pass the assessment. I know that I can use failure captions and set the number of tries a user is allowed, but have not been able to determine a way to set it up as pass/fail.
Thanks for your assistance.

Hello,
No problem with CP. First you will have to determine the mastery score, what is needed to Pass. This has to be done in the Quiz, Preferences, Pass or Fail, Pass options. You can combine Question slides with assessment, where the user has to use interactive objects to be scored. An overview of scored Question slides and interactive objects can be seen in the view 'Advanced Interaction' (menu Project). Then you will have to set the Reporting (also in Quiz Preferences), depending on the SCORM version (do not know Plateau myself). It is possible to report Pass/fail as you will see in those settings.
Hope this can be a start.
Lilybiri

Pass/Fail in Report Filename

I would like to display pass/fail in the TS report filename. Please provide steps or example code of how to perform this task.

Just an update:
TestStand 4.2 gives you the ability to specify the report path using Expressions as well right from the Report Options dialog box. For instance, using the
<UUTStatus> macro, you could specify that reports for UUTs that Pass versus those that Fail go to different locations.
For more information on this, refer to:
NI TestStand Help: Specifying Report File Paths by Expression
NI TestStand 4.2 Release Notes: Using Expressions to Customize Report File Paths
For more information on the new features in TestStand 4.2, refer to:
Whats New in TestStand 4.2
Jervin Justin
NI TestStand Product Manager

Reporting pass/fail information from threads in Teststand logs

Similar Messages

Maybe you are looking for