Reportings Services in a 2-Tier Architecture / (Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key. )

Hello,
we want to install Reporting Services in a 2-Tier Architecture. The Servers are the following:
SERVER1: Windows Server 2012 and SQL Server 2012
SERVER2: SharePoint 2013 (WFE)
Reporting Server is installed on SERVER1 and running. On SERVER2 the registration of the service through Powershell was done but it does not start. An Error when starting the Service on the server occurs with the message:
"Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key."
I have found the following in msdn stating that a minimal of the same SharePoint Installation must exist on the Reporting Server. The article is for SQL Server 2008 R2 and SharePoint 2010. Is this the case also for SQL Server 2012 and SharePoint 2013 and
the root of the problem? http://msdn.microsoft.com/en-us/library/bb510781%28v=sql.105%29.aspx
If so does this mean that I require for the installation another License?!?!
Thank you in advance!

Hi,
According to your post, my understanding is that you wanted to install Reporting Services in a 2-Tier Architecture.
As the article
say, if you use Two-Computer Deployment, the first computer hosts an instance of a SharePoint product. The Reporting Services Add-in is installed on this computer. The second computer hosts SQL Server Reporting Services and the Database Engine.
The steps to install in a  two-tier environment are very similar to a standalone environment hence you can go to refer to the ' Install Reporting Services SharePoint Mode for SharePoint 2013' article at http://msdn.microsoft.com/en-us/library/jj219068(v=sql.110).aspx
To install in a  two-tier environment, you can refer to:
How to setup, configure and test
SQL 2012 SP1 SSRS with SharePoint 2013 SP1
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Similar Messages

  • SharePoint 2010 with SQL Reporting Services 2012 "Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"

    i have a small sharepoint farm "2 servers" (WFE) and SQL Server 2012 ,
    i installed rsSharePoint for reporting services , as a read the Reporting services is Application Service  with SQL 2012 not as SQL 2008 R2 with SharePoint integrated mode, so after installation when am trying to configure the  SQL Server
    Reporting Services Application services i got the below error :
    "Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"
    any kind of help would be much appreciated .

    I'm having the same issue, but to me it seems like the instructions I've seen are all over the place.  I already have SP 2013 and SQL 2012 SP 1 installed.  I already added the features for Reporting Services - Sharepoint and Reporting Services
    Add-in for SharePoint Products.  I didn't see the Reporting Service service in CA, so I ran the powershell scripts to add SPRSService and SPRSServiceProxy. 
    My initial quest, was to get the BI features enabled, which took me on the journey of adding the Report Services, then I got the error.
    Then when I read this about installing the BI features
    http://blogs.msdn.com/b/querysimon/archive/2012/11/26/installing-the-bi-features-of-sharepoint-2013.aspx, which I already had SQL and SP installed.  Do I have to rerun and selct the SQL Server PowerPoint for SharePoint option?  I have the PowerPoint
    Configuration Tool on my SQL server, I run it and I get PowerPivot for SP 2013 Configuranoi is missing prerequisits:  SP 2013 EE is required.  Which I have EE.
    Is Reporting Services different or in addition to the BI Feature (PowerPivot)? 
    Have I missed a step?
    Thanks for you help.
    Kim
    Kim.Williams

  • Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\120 registry key.

    Dear Expert,
    I setup SharePoint for 3 tiers, WFE, APP + DB Server.
    I installed SQL 2014 reporting service Add-in on APP Server and already enable sql reporting service in DB Server. DB Server can do report server.
    I follow the step : https://msdn.microsoft.com/en-us/library/jj219068(v=sql.120).aspx  but I stuck in no.2, I cannot start the services, in picture below.
    I checked the SSRS provision is disabled not online
    Please help.

    Hi MasterBird,
    According to your description, when you register and start the Reporting Services SharePoint Service, the error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\120 registry key is thrown out.
    As this
    article say, if you use three-computer deployment, the first computer hosts an instance of a SharePoint product. The Reporting Services Add-in is installed on this computer. The second computer hosts SQL Server Reporting Services and the third computer
    hosts an instance of the Database Engine.
    Regarding the error message, it could cause by the Reporting Services – SharePoint feature and Reporting Services Add-in for SharePoint Products haven’t been installed. Please refer to articles:
    SSRS SharePoint 2013 Create Service Application error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key Error
    Installing SSRS 2012 in SharePoint Mode on SP2010
    If issue persists, please check the error detailed information in ULS logs, and check Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log to see if any error occurred during set up. For more information, please refer to this article:
    Troubleshoot a Reporting Services Installation.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • Windows 7 64-bit Installation Error "Could not find appropriate listener"

    *11.2.0.1* Installation fails on Win7 Professional 64-bit
    1) Installed software (did not create database initially)
    2) Create Listener via Net Config (no apparent problems here)
    3) Added DB to Listener via Net Mgr
    4) dbca fails in final portion of DB creation. Error states: *"Could not find appropriate listener for this database. Configuring DB control requires database to be registered with at least one listener.*
    My Listener services is started.
    All current updates have been applied to Win 7.
    I have searched around and found similar issues that seem to center around adminstrator rights, but I have not been able to make any progress.
    C:\Users\scott_hp>lsnrctl status
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 10:16
    :11
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.195)(PORT=1522
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date 20-FEB-2012 09:47:07
    Uptime 0 days 0 hr. 29 min. 7 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\oracle\app\scott_hp\product\11.2.0\dbhome_1
    etwork
    \admin\listener.ora
    Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
    alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.195)(PORT=1522)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "mmodb.192.168.0.195" has 1 instance(s).
    Instance "mmmodb", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully <gphmh>
    Edited by: svk1965 on Feb 20, 2012 7:17 AM
    Edited by: svk1965 on Feb 20, 2012 7:22 AM

    svk1965 wrote:
    FIXED!! *Thank you very much.* I followed your instructions, renaming listener.ora, before the lsnrctl start. I then waited and ran dbca and walked through the configuration screens and this time it processed through to 100%. But I am not sure I understand what caused the issue??
    C:\Windows\system32>lsnrctl stop
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:34
    :24
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.195)(PORT=1521
    The command completed successfully
    C:\Windows\system32>lsnrctl start
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:36
    :51
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Starting tnslsnr: please wait...
    TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
    Log messages written to c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\al
    ert\log.xml
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date 20-FEB-2012 11:36:56
    Uptime 0 days 0 hr. 0 min. 5 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
    alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
    The listener supports no services
    The command completed successfully
    C:\Windows\system32>lsnrctl status
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:39
    :30
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date 20-FEB-2012 11:36:56
    Uptime 0 days 0 hr. 2 min. 37 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
    alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
    Services Summary...
    Service "mmmodb.192.168.0.195" has 1 instance(s).
    Instance "mmmodb", status READY, has 1 handler(s) for this service...
    Service "mmmodbXDB.192.168.0.195" has 1 instance(s).
    Instance "mmmodb", status READY, has 1 handler(s) for this service...
    The command completed successfullyThe db instance will register itself with the listener every minute or so. When you first start the listener, it will have to wait until the next cycle of the instance self-registration before it (the listener) knows about the db instance.

  • Reporting Services 2008 R2 configuration error: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server

    Hi, I am using SQL Server 2008 R2 and on one of our dev boxes I am trying to setup ReportServer using ReportingServices Configuration manager. This is was installed longtime back and during installation they created a service account for reporting services.
    When I try to configure the service account I do not get the service account created during the installation in the pull down and if I were to use something different I get this "Named Pipes Provider, error: 40 - Could not open a connection to SQL Server"
    error.
    Thanks in advance...........
    Ione

    Hi,
    Take a look at this blog - http://blogs.msdn.com/b/sql_protocols/archive/2007/03/31/named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server.aspx
    I hope it will help.

  • Powerpivot add-in installation issue "Could not find a part of the path"

    Hello, 
    I got a Windows Server 2008R2 terminal server with Office 2010 and Powerpivot installed. I have an issue for some users, not every user get this error. When trying to add the Powerpivot add-in in Excel the following error message is displayed: 
    Name: 
    From: file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto
    ************** Exception Text **************
    System.Deployment.Application.DeploymentDownloadException: Downloading file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto did not succeed. ---> System.Net.WebException:
    Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'. ---> System.Net.WebException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft
    Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'. ---> System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
       at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
       --- End of inner exception stack trace ---
       at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
       at System.Net.FileWebRequest.GetResponseCallback(Object state)
       --- End of inner exception stack trace ---
       at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.FileWebRequest.GetResponse()
       at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
       --- End of inner exception stack trace ---
       at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.GetManifests(TimeSpan timeout)
       at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()
    I have checked the path and I found nothing. I could understand the problem if all users got this error but it's online a handfew of users. Other users can add the add-in in Excel without any issue. All the users are in the same domain and they use the one
    and only terminal server on the site.
    Any advice? I've searched the web but haven't found anything.
    Thanks in advance!

    Guys, I think I solved the
    issue:
    Symptoms
    1. Power Pivot SQL 2012 32-bit installed over the old version without
    deinstalling it
    2. Installed with a user with administrator rights
    3. It worked under the profile with admin rights, it didn't work under the
    normal users w/o admin rights and threw this error message: Downloading file.///c:/Program files (x86)/Microsoft analysis services/AS Excel Client/10/Microsoft.AnalysisServices.XLHost.Addin.VSTO
    did not succeed.
    4. In the admin profile, it went to the path "110":  C:/Program
    Files (x86)/Microsoft Analysis Services/AS Excel
    Client/110/Microsoft.AnalysisServices.Modeler.FieldList.vsto
    5. In the normal profile, it went to the - wrong - "10" path:
    C:/Program Files (x86)/Microsoft Analysis Services/AS Excel
    Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto
    SOLUTION
    1. ADMIN: Installed VSTO 4.0
    2. ADMIN: Checked if the .NET Programmability Support was installed - it was -
    if not, install it!
    3. NORMAL USER: Create a .reg file (Backup your registry before!) and
    use it UNDER THE NORMAL USER!!!
    Windows Registry Editor Version 5.00
    [HKEY_CURRENT_USER\Software\Microsoft\Office\Excel][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins\Microsoft.AnalysisServices.Modeler.FieldList]
    "Description"="Microsoft SQL Server PowerPivot for Microsoft Excel"
    "FriendlyName"="PowerPivot for Excel"
    "LoadBehavior"=dword:00000003
    "Manifest"="C:\\Program Files\\Microsoft Analysis Services\\AS
    Excel Client\\110\\Microsoft.AnalysisServices.XLHost.Addin.vsto|vstolocal"
    "CartridgePath"="C:\\Program Files\\Microsoft Analysis
    Services\\AS OLEDB\\110\\Cartridges\\"
    4. NORMAL USER: Rename the registry key
    "HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User Settings\Microsoft.AnalysisServices.Modeler.FieldList"
    into
    "HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User
    Settings\Microsoft.AnalysisServices.Modeler.FieldList_old"
    5. NORMAL USER: Start up Power Pivot and it should
    work now!
    Analysis
    IMHO the issue lies in the fact, that the Power Pivot
    installer creates two problems:
    The first issue is that the path to the add-in under
    the NORMAL user is simply wrong and points to a wrong location (the
    "10" in the path). In the admin profile, where it was originally
    installed, it points to the "110" path which is correct.
    The second issue is that the installation procedure
    somehow needs to create a registry key (the one under point 4 in the solution)
    to complete it self and if this key already exists it fails to install and
    throws up weird error messages. If you delete or rename this key, it is created
    again (exactly in the same way) but then everything works out.
    Hope this
    helps!
    Regards, Reto

  • Custom Timer Job to execute WCF web service error - Could not find default endpoint element that references contract

    Hi,
    I am currently creating custom timer job to call WCF web service to perform nighty job to update employee document library metadata. If I update regular list/library items it updates correctly on a specified interval basis. However when I try to integrate
    the WCF client, it throws error shown below :
    Could not find default endpoint element that references contract EmployeeServiceReference.
    EmployeeServiceClient in the ServiceModel client configuration section. This might be because no configuration file was found for your application, or because no endpoint element matching this contract could be found in the client element.
    I followed exact instructions Andrew Connell has provided but included my logic in execute()
    public
    override
    void Execute(Guid
    targetInstanceId)
    var empClient =
    new
    'ServiceReference.EmployeeServiceClient();
    var employee = empClient.EmployeesMethod();
    I have tried all approaches to manually adding app.config settings in sharepoing web.config but still it throws the error mentioned. It seems that application config and sharepoint site config binding issue still exist and cannot be resolved.
    <system.serviceModel>
    <bindings>
    <basicHttpBinding>
    <binding
    name="BasicHttpBinding_EmployeeService"
    />
    </basicHttpBinding>
    <netTcpBinding>
    <binding
    name="CustomBinding_EmployeeService">
    <security>
    <transport
    protectionLevel="None"
    />
    </security>
    </binding>
    </netTcpBinding>
    <wsHttpBinding>
    <binding
    name="WSHttpBinding_EmployeeService">
    <security
    mode="None"
    />
    </binding>
    </wsHttpBinding>
    </bindings>
    <client>
    <endpoint
    address="http://services.mycomp.com/EmployeeService.svc"
    binding="wsHttpBinding"
    bindingConfiguration="WSHttpBinding_EmployeeService"
    contract="EmployeeServiceReference.EmployeeService"
    name="WSHttpBinding_EmployeeService"
    />
    <endpoint
    address="http://services.mycomp.com/EmployeeService.svc/soap"
    binding="basicHttpBinding"
    bindingConfiguration="BasicHttpBinding_EmployeeService"
    contract="EmployeeServiceReference.EmployeeService"
    name="BasicHttpBinding_EmployeeService"
    />
    <endpoint
    address="net.tcp://crmapp.mycomp.com:5050/EmployeeService.svc/tcp"
    binding="netTcpBinding"
    bindingConfiguration="CustomBinding_EmployeeService"
    contract="EmployeeServiceReference.EmployeeService"
    name="CustomBinding_EmployeeService">
    <identity>
    <userPrincipalName
    value="[email protected]"
    />
    </identity>
    </endpoint>
    </client>
    </system.serviceModel>
    Will you please help resolving this issue?

    Hi,
    You can use any of the three approaches:-
    1) Access web application's web.config programmatically in Execute() method.
    http://praveenkasireddy.wordpress.com/2012/12/14/access-web-application-configuration-values-in-timer-job-sharepoint/
    2) Store the configuration in xml and upload it to SharePoint document library then read from there
    http://www.sharepointdynamics.net/2011/08/using-an-xml-settings-file-to-store-values-for-your-sharepoint-projects/
    3) Programmatically configure a WCF endpoint.
    http://msdn.microsoft.com/en-us/library/ff647110.aspx
    Regards, Shruti

  • Installer problems - Could not find the main class

    Hello
    I am trying to install openmq on vista and having problems. I've had the same problem with a nightly build of 4.3 and stable 4.2 build. The install kicks off fine until I get to the part where the install happens and then I get:
    Java Virtual Machine Launcher : Could not find the main class. Program will exit
    I have several sun JREs/JDKs installed and have tried all of them, the installer itself is not impacted:
    jre 1.7.0
    jdk 1.7.0
    jre 1.6.0.7
    jre 1.6.0.7 and jre 1.6.0.7
    Am I missing something obvious or is there a way of installing without the java installer ?
    Much obliged
    Edited by: Alphawave on Oct 14, 2008 11:39 AM

    Hi,
    I've seen this error before on vista. In the past the users saw this message when they didn't have write permission on the directory they were installing to. Even with administrator privileges, they still need write permissions.
    A quick test is to:
    login as the user you are installing as.
    cd to the directory you are installing into.
    touch foo // to see if you can write to the dir.
    Thanks.

  • ITunes 10.7 installation error:  "Could Not Open Key," etc. & Privileges error

    When attempting to download iTunes 10.7.0.021 (latest version for iOS 6 compatibility with my new iPhone5) I get the following error: 
    "Could not open key:  UNKNOWN\Components\DA42BC89BF25F5BD0AF18C3B91A1EE8\7E577B2224C65CF4E801A9E52375 DB49."
    This error pops up in the middle of my iTunes installation; After hitting okay, the installation proceeds and then another error message reading:
    "Apple Mobile Devices Failed To Start.  Please make sure you have sufficient privleges... etc."
    I don't know what to do about both of these errors, so if you find a solution please e-mail me:  [email protected]

    try with this one
    uninstall all the apple application S/w like Quicktime, Bonjour,
    apple Device Support, Apple Auto update, Itunes etc from your pc,
    Reboot it
    Now download a fresh itunes from apple and try installing
    Reboot it
    If you are having Problem in uninstalling any of the apple application
    try 'revo uninstaller' and uninstall all the apple applications
    mentioned above

  • Installation Error "Could not determine information about file system"

    Hi, i get the following error trying to install ABAP central instance on windows server 2003 enterprise edition. I am trying to do a local installation.
    Anybody have any ideas what i am doing wrong?
    INFO 2007-05-13 23:50:40
    Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: q0w9e9r8t7.1.xml.
    INFO 2007-05-13 23:50:40
    Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: q0w9e9r8t7.1.xml.
    INFO 2007-05-13 23:50:40
    Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\q0w9e9r8t7.1.xml.
    INFO 2007-05-13 23:50:41
    Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.1.xml.
    INFO 2007-05-13 23:50:41
    Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.1.xml.
    INFO 2007-05-13 23:50:41
    Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\keydb.1.xml.
    INFO 2007-05-13 23:50:41
    Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\change.log.
    INFO 2007-05-13 23:50:42
    Output of change user /install is written to the logfile change.log.
    WARNING 2007-05-13 23:50:42
    Execution of the command "change user /install" finished with return code 1. Output: Install mode does not apply to a Terminal server configured for remote administration.
    INFO 2007-05-13 23:50:42
    Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'ENTERPRISE\Administrator' on host '.'.
    INFO 2007-05-13 23:50:42
    Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\summary.html.
    PHASE 2007-05-13 23:50:42
    Prepare the installation program.
    INFO 2007-05-13 23:50:49
    Installation start: Sunday, 13 May 2007, 23:50:39; installation directory: C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI; product to be installed: SAP NetWeaver '04 SR1> SAP System Installation> ABAP System> Oracle> Unicode> Central Instance Installation
    INFO 2007-05-13 23:50:50
    Host operation t_HostInfo_SHARED processed successfully.
    ERROR 2007-05-13 23:55:28
    FSL-02107  Path component contains reserved character (':'): C:
    ERROR 2007-05-13 23:55:28
    FSL-02106  Path contains reserved character (':'):
    C:
    SAP
    ERROR 2007-05-13 23:55:28
    MOS-01236  Could not determine information about file system enterprise:, mounted at unknown.
    WARNING 2007-05-13 23:55:28
    The step GetMountInfo with step key SAPSYSTEM_CI|ind|ind|ind|ind|ind|0|SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|GetMountInfo was executed with status ERROR.

    Hi.. Philip...
    During installation when it prompts / gives us to  type / Browse the installtion sources like installation master / ker cd's / installation export .......,
    What did you do ?
    did you browse to the respective directory ??
    or
    did you manually type ??
    I got the same problem on unix like. On oversight instead of browsing i typed manually and by mistake in one of the path i added space in one of the installation source path and installation ended with not able to locate file system error.
    if you have typed it manually .. i beleive it could be similar to this ??
    Update your reply
    Rgds
    PR

  • Conversion Agent Installation Error(Could Not Create IFCMFramework)

    Hello ,
    When I am installing the conversion Agent from Item field in to my stand alone system which is a XI client.I am getting the following error could you plz guide how to resolve this.
    <b>Internal error logged: Could Not Create IFCMFramework.CFramework Control.
    Error details can be found in the log file.</b>
    java.lang.NullPointerException
    at com.itemfield.cm.ui.wizards.project.ActiveXProjectWizard.addEventListeners(ActiveXProjectWizard.java:24)
    at com.itemfield.cm.ui.wizards.project.ActiveXProjectWizard.<init>(ActiveXProjectWizard.java:20)
    at com.itemfield.cm.ui.wizards.project.CMWizard.init(CMWizard.java:118)
    at org.eclipse.ui.internal.dialogs.WorkbenchWizardNode.getWizard(WorkbenchWizardNode.java:126)
    at org.eclipse.jface.wizard.WizardSelectionPage.getNextPage(WizardSelectionPage.java:96)
    at org.eclipse.jface.wizard.WizardDialog.nextPressed(WizardDialog.java:677)
    at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:316)
    at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
    at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
    at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
    at org.eclipse.jface.window.Window.open(Window.java:563)
    at org.eclipse.ui.actions.NewProjectAction.run(NewProjectAction.java:107)
    at org.eclipse.jface.action.Action.runWithEvent(Action.java:842)
    at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:456)
    at org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionContributionItem.java:403)
    at org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionItem.java:397)
    at org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(ActionContributionItem.java:72)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
    at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
    at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
    at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
    at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.eclipse.core.launcher.Main.basicRun(Main.java:291)
    at org.eclipse.core.launcher.Main.run(Main.java:747)
    at org.eclipse.core.launcher.Main.main(Main.java:583)

    check this https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3332. [original link is broken] [original link is broken] [original link is broken] [original link is broken]

  • Installation Error - Could not open key.............Please help

    Still trying to install iTunes and QuickTime, but have an error,
    Could not open key:
    HKEY_LOCALMACHINE\Software\Classes\QuickTimePlayerApp\CLSID.
    Verify that you have suffcient access to that key, or contact your support personnel.
    Any help would be most welcome, as I am desperate to use my new Nano my wife just bought me for my Birthday. In plain English if you can.

    +My next problem is, that whenever I plug my iPod Nano, 3rd Gen into my PC, it shuts down and reboots. Any ideas on this one?+
    Do you also get that if you try playing a movie using QuickTime?
    Are you getting any sort of blue screen when the PC shuts down? if so, what numerical and text codes are you getting with it? (ie 0x{zeros/letters/numbers} CAPSANDUNDERSCORES)
    If the blue screen mentions a specific file, let us know what that is called too. (Exact spelling, please.)
    Here's a reference on the sorts of things i'm asking about:
    Troubleshooting Windows Stop Messages
    If you're not seeing a blue screen (or just a flash of one), we can use this technique to make hidden blue screens appear for us:
    1) Open your system control panel (Start->Control Panels->System).
    2) Select the "Advanced" tab.
    3) Click the "Startup and Recover" section's "Settings" button
    4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.

  • Issue when installing SQL Server Express 2012 - "The requested control is not valid for this service" + "Could not find the database engine startup handle"

    Good morning,
    I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
    Installation goes plain until around the end of the progress bar, it stops on the setup of
    SqlEngineDBStartConfigAction_install_configrc_Cpu32
    giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
    After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
    I've put in my SkyDrive the error log I received after the install;
    I'm at full disposal if you need further information,
    thank you in advance
    Best regards
    Francesco

    Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above: 
    SqlEngineDBStartConfigAction_install_configrc_Cpu32
    giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
    After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
    Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
    Then, I just got my account added as Local Admin and then tried to start the service and was able to.
    However, I am not sure whether same was the case for you.
    Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

  • Reinstall OS x "could not find installation information for this machine"

    Early 2011 MacBook Pro upgraded (on-line) from Lion to Mountain Lion.
    Going to Rocovery Console (Command+R) during startup and choose "Reinstall OS X".
    Clicking Continue in  OS X Mountain Lion  window, clicling contionue in
    "To download and restore OSX, your computers'elidgilibility will be veryfied with Apple"
    and got error:
    Could not find installation information for this machine.
    Contact AppleCare.
    Well, when I retirn from the office, AppleCare is not working anymore.
    Any idea what to do?
    Thanks.

    Singapore ISP  Singtel is having issues with Apple Internet Recovery.
    There is a need to add proxy access via port 8080.
    Since I can't even get into Recovery mode, this info doesn't help.
    So, I call up Apple hotline and explain the whole picture.
    Was fortunate that Apple has similar feedback from Singapore user.
    So, was told to just bring down Mini to service provider.
    Problem solved some what.
    Service provider only reinstate the ori OS X Lion.
    Back home, I download and install ML.
    This time, made a copy of ML installer in USB stick for future usage.
    I guess the only way around this is getting someone to just install Lion or ML, if Internet recovery doesn't work.

  • Internet Recovery could not find installation information on this machine.

    Hi there I've bought an iMac the latest model as well as the Macbook Air also the latest model and the Airport Extreme also the lastest model but i am unable to do internet recovery and none of my devices came with operating disc to restore my systems. I'm always prompted with the error "could not find installation information on this machine". Is there anyway I could have this fixed? I've called technical support and they said they cant do anything but for me to bring it to any apple support centre to get it formatted. Its alot of trouble for me to go down leave the machine there for a few days and come back to collect it again. Both my machines are extremely new and could not perform this internet recovery from day one. I even though it was my router so i gave away my WNDR 3700 and bought the apple airport extreme. Please help

    It's possible there is a block on your Interet connection. If it works on a Apple network but not yours then that points the finger at your network. If this is a home network then I'd start by changing the DNS settings to:
    1. System preferences
    2. Network
    3. Click Advanced
    4. Click DNS tab
    5. Click + sign
    6. Add 208.67.222.222
    7. Click + sign
    8. Add 208.67.220.220
    9. Click OK.
    10. Exit System Preferences
    If you are on a business network or any other type of network where someone else has control over it then they may have put certain restrictions on it. In that case you will have to contact the Network Administrator for help.

Maybe you are looking for

  • How to use variables in data slices?

    Hello, in BI-IP I have tried to use variables in a data slice. The user should fill these variables. How can one use and fill these variables? Thank you Daniel

  • New 15 i7 mbp getting too hot on small tasks

    When I'm browsing through firefox, the CPU temp goes from 51 to 55 degree celsious. the left side palmrest seems to be hotter than the right side palmrest. Is it me, or are these normal temps if browsing through firefox? HD Macintosh: 37 CPU: 54 CPU

  • Cant upload music video onto 30g video ipod? please HELP!

    it said " here it goes again" was not copied to the ipod " fizzy's ipod" because it cannot be played on this ipod? How come? please help, it took 5 hrs to load this video. please? I have the latest version of itunes, and My ipod is 1.2

  • List of SQL server Agent jobs for a SSIS package

    Hello everyone, Can you please help me in trying to list all the jobs that have a particular ssis jobs. I saw that all the jobs and jobs steps with the query: SELECT    Srv.srvname AS ServerName,    Job.name AS JobName,    JStep.step_id,    JStep.ste

  • Problems using uploadify 2.0 with the new Adobe Air 3.8 resp. Flash Plyer 11.8

    Hi there, we have a problem with the plug-in uploadify 2.0 and the new Adobe Air 3.8. It isn´t compatible. The plug-in just doesn´t work any longer. Anybody else with this problem? Maybe sb already got a solution? --We need urgent help .. Thanks in a