Repository EPM - Object created automatically in database

Hi,
Somebody know the database total volume used for repository database of Essbase, Shared Services and Workspace instance ?
In same way, the number of lines provided for each schema/user oracle (3 in my configuration) and a mapping of the different object installed...
In my point of view, thoses objects are automatically created during installation but my dba prefer to control step by step.
Thanks a lot for your help.
Database : Oracle
EPM version : 11.1.1.3
System : Solaris

Can't seem to find any matching bug.
However, version 7.0 is already EOL, and here is the EOL notification:
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5708/ps5709/ps2030/end_of_life_notice_for_cisco_pix_sec_app_v7.html
There won't be anymore bug fixes for version 7.0.
Well, actually version 7.1, 8.0 is already all EOL, and PIX is also EOL.
It's probably time to move to ASA firewall which is the replacement of PIX.

Similar Messages

Objects are updated/created in the database in wrong order

Hello,
I have three objects tied with certain relations: Ticket, Type and
Solution.
Relation between Ticket and Solution is unidirectional one-to-one - ticket
may contain one solution. Relation between Type and Solution is one-to-many
bi-directional.
During transaction I do the following:
1) instantiate new Solution and add it to the Type;
2) set this Solution to the Ticket.
On commit Kodo tries to update ticket before creating solution in the
database. What am I doing wrong?
Thank you in advance.
Best regards,
Alexey Maslov

Alex,
Thank you. It worked :)
"Alex Roytman" <[email protected]> wrote in message
news:[email protected]...
The best way to handle update/insert order is not to rely on it. Not only
foreign key sensitive to order but unique constraints too. So if your
database supports it (and most decent databases do) use defferred
constraints - the ones which get applied on commit not on
insert/update/delete and you will be fine
"Alexey Maslov" <[email protected]> wrote in message
news:[email protected]...
Patric,
Thank you for response.
It's not about Type->Solution relation. We've got constraint from
Ticket
to Solution. But we need to load Ticket to get it's Type.
It's a problem to instantiate the Solution before loading Type. Thething
is that Type object is used to construct Solution automatically adding
it
to
internal collection.
This is done to overcome JDO deficiency in relation maintenance. I'vefound
this pattern in Robin Roos' book.
create...() method usage makes sure that dependent object is added tothe
parent after each creation. Adding objects manually after creation wouldbe
error-prone and code-cluttering.
Where's that "transparency" so much told about on JDOCentral?
P.S. I wonder how this pattern works in other places?
"Patrick Linskey" <[email protected]> wrote in message
news:[email protected]...
Alexey,
In Kodo JDO 2.3 and 2.4, object changes are flushed to the database in
the order that the objects are first enlisted in the transaction. So,
if
you instantiate the Solution object before loading Type, everything
should work the way you want it to.
We have more sophisticated foreign key constraint satisfaction code in
internal codebases -- expect to see this hit production in the nextfew
months.
-Patrick
Alexey Maslov wrote:
Hello,
I have three objects tied with certain relations: Ticket, Type and
Solution.
Relation between Ticket and Solution is unidirectional
one-to-one -
ticket
may contain one solution. Relation between Type and Solution is
one-to-many
bi-directional.
During transaction I do the following:
1) instantiate new Solution and add it to the Type;
2) set this Solution to the Ticket.
On commit Kodo tries to update ticket before creating solution inthe
database. What am I doing wrong?
Thank you in advance.
Best regards,
Alexey Maslov
Patrick Linskey [email protected]
SolarMetric Inc. http://www.solarmetric.com

Snap file is created automatically on my SharePoint database ?

Hi,
On My SharePoint Database a snap file is created which consumes lots of space and the performance of server is degraded.
The snap file is created automatically and its also removed automatically after 1 day.
I am new to SQL and won't find any scheduled task for snap file under SQL .
I had checked on technet and won't find an appropriate solution, why snapshot file is created.
The SQL server version is 2008 R2 and SharePoint version is 2013.
Also due to snap file sometime I am unable to take backup of database with DPM (Data Protection Manager).
Thanks,
Nadeem A

Hi Nadeem Ansari,
A take Snapshot operation creates .vmdk, -delta.vmdk, vmsd, and vmsn files. You should ensure the type of snapshots file.According to your description, the snapshot file was created automatically, and there are no any scheduled task for the snap file in
SQL Server instance. As other post, you need to verify if there is a job about back up your back up a database to a snapshot in SharePoint Server by using SQL Server tools. And verify if the snapshot file was created by others, and if it is file system snapshots
file.
For more information about snapshot files, you can review the following article.
https://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.vsphere.vm_admin.doc%2FGUID-38F4D574-ADE7-4B80-AEAB-7EC502A379F4.html
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

Can't create or import Database Control Repository on fresh install

I've just installed the latest 10g version on a Linux system. Afterward, and after exporting my ORACLE_SID and ORACLE_HOME variables, on trying to start the EM Control (emctl), I got the dreaded "OC4J Configuration issue" error:
./emctl start dbconsole
TZ set to US/Eastern
OC4J Configuration issue. /usr/local/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole_myhostname_myoracledb not found.
lsnrctl hung when connecting or checking status:
./lsnrctl
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 25-JUN-2007 16:14:23
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1521)))
So I ran netca to configure the listener, and that seemed to work, but at the end it complained that the port was already in use (even though netstat -a shows nothing on port 1521). Then I tried to create the repository (emca -repos create), but that failed too ("SYSMAN already exists"):
INFO: Creating the EM repository (this may take a while) ...
Jun 25, 2007 4:18:55 PM oracle.sysman.emcp.EMReposConfig createRepository
CONFIG: ORA-20001: SYSMAN already exists..
ORA-06512: at line 17
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-20001: SYSMAN already exists..
ORA-06512: at line 17
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeScript(SQLEngine.java:841)
at oracle.sysman.assistants.util.sqlEngine.SQLPlusEngine.executeScript(SQLPlusEngine.java:265)
at oracle.sysman.assistants.util.sqlEngine.SQLPlusEngine.executeScript(SQLPlusEngine.java:306)
at oracle.sysman.emcp.EMReposConfig.createRepository(EMReposConfig.java:360)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:182)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Jun 25, 2007 4:18:55 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
Jun 25, 2007 4:18:55 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at /usr/local/oracle/product/10.2.0/db_1/cfgtoollogs/emca/myoracledb/emca_repos_create_<date>.log for
Jun 25, 2007 4:18:55 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at /usr/local/oracle/product/10.2.0/db_1/cfgtoollogs/emca/myoracledb/emca_2007-06-25_04-18-37-PM.log for morJun 25, 2007 4:18:55 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error creating the repository
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:194)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
I'm not sure what else to try. Any thoughts?
Thank you,
~John

Please let me know if this isn't the correct log:
$ cat $ORACLE_HOME/cfgtoollogs/emca/oracledb/emca_2007-06-27_04-51-05-PM.log
Jun 27, 2007 4:51:05 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-config' set to true
Jun 27, 2007 4:51:05 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'UPDATE_EMAIL' set to true
Jun 27, 2007 4:51:05 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'dbcontrol' set to true
Jun 27, 2007 4:51:05 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'db' set to true
Jun 27, 2007 4:51:05 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'create' set to true
Jun 27, 2007 4:51:05 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'drop' set to true
Jun 27, 2007 4:51:05 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: ORACLE_HOME value: /usr/local/oracle/product/10.2.0/db_1
Jun 27, 2007 4:51:05 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 27, 2007 4:51:05 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: EM_HOME value: /usr/local/oracle/product/10.2.0/db_1
Jun 27, 2007 4:51:09 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SID value: oracledb
Jun 27, 2007 4:51:09 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 27, 2007 4:51:09 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: This is expected, as we might be calling it from a non-rac home
Jun 27, 2007 4:51:09 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Error retrieving the local node for the cluster
Jun 27, 2007 4:51:09 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: PRKH-1010 : Unable to communicate with CRS services.
[OCR Error(Native: prsr_initCLSS:[21])]
Jun 27, 2007 4:51:09 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster Error Message: PRKH-1010 : Unable to communicate with CRS services.
[OCR Error(Native: prsr_initCLSS:[21])]
Jun 27, 2007 4:51:09 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 27, 2007 4:51:09 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: oracledb Host: [hostname] Node: null OH: /usr/local/oracle/product/10.2.0/db_1 isDBC: false
Jun 27, 2007 4:51:09 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: oracledb Host: [hostname] Node: null OH: /usr/local/oracle/product/10.2.0/db_1 agentHome: null isCentral: false
Jun 27, 2007 4:51:09 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: oracledb Host: [hostname] Node: null OH: /usr/local/oracle/product/10.2.0/db_1 agentHome: null isCentral: false
Jun 27, 2007 4:51:09 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SYS_PWD.
Jun 27, 2007 4:51:09 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: oracledb, oracleHome: /usr/local/oracle/product/10.2.0/db_1, and user:
Jun 27, 2007 4:51:10 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 27, 2007 4:51:10 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Jun 27, 2007 4:51:10 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Jun 27, 2007 4:51:12 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: PORT value: 1521
Jun 27, 2007 4:51:15 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SYS_PWD.
Jun 27, 2007 4:51:15 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: oracledb, oracleHome: /usr/local/oracle/product/10.2.0/db_1, and user: SYS
Jun 27, 2007 4:51:15 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 27, 2007 4:51:17 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: oracledb, oracleHome: /usr/local/oracle/product/10.2.0/db_1, and user: DBSNMP
Jun 27, 2007 4:51:17 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 27, 2007 4:51:20 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: EMAIL_ADDRESS value:
Jun 27, 2007 4:51:21 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: MAIL_SERVER_NAME value:
Jun 27, 2007 4:51:21 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 27, 2007 4:51:21 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: CONFIRMATION ANSWER value:
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: CONFIRMATION ANSWER value: yes
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LOG_FILE.
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: oracledb, oracleHome: /usr/local/oracle/product/10.2.0/db_1, and user: SYS
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: oracledb
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /usr/local/oracle/product/10.2.0/db_1/cfgtoollogs/emca/oracledb/emca_2007-06-27_04-51-05-PM.log.
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'CHECK_CONFIG' set to true
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: oracledb, oracleHome: /usr/local/oracle/product/10.2.0/db_1, and user: SYS
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: oracledb, oracleHome: /usr/local/oracle/product/10.2.0/db_1, and user: DBSNMP
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: oracledb, oracleHome: /usr/local/oracle/product/10.2.0/db_1, and user: SYS
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: oracledb, oracleHome: /usr/local/oracle/product/10.2.0/db_1, and user: SYS
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: oracledb
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_DOMAIN value: world
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: oracledb
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: oracledb.world
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBID.
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: No dbid available. Will query db to extract it.
Jun 27, 2007 4:51:23 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: oracledb, oracleHome: /usr/local/oracle/product/10.2.0/db_1, and user: SYS
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBID value: 3244183297
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'db' set to true
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: oracledb, oracleHome: /usr/local/oracle/product/10.2.0/db_1, and user: SYS
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: oracledb
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_DOMAIN value: world
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: oracledb
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: oracledb.world
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: oracledb, oracleHome: /usr/local/oracle/product/10.2.0/db_1, and user: SYS
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter EMAIL_ADDRESS.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_NAME.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: oracledb, oracleHome: /usr/local/oracle/product/10.2.0/db_1, and user: SYS
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: oracledb, oracleHome: /usr/local/oracle/product/10.2.0/db_1, and user: SYS
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_DOMAIN value: world
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: oracledb.world
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /usr/local/oracle/product/10.2.0/db_1/sysman/config/emd.properties to /usr/local/oracle/product/10.2.0/db_1/sysman/config/emd.properties.emca.tmp
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /usr/local/oracle/product/10.2.0/db_1/sysman/config/emd.properties has been copied to /usr/local/oracle/product/10.2.0/db_1/sysman/config/emd.properties.emca.tmp
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /usr/local/oracle/product/10.2.0/db_1/sysman/config/emoms.properties.emca to /usr/local/oracle/product/10.2.0/db_1/sysman/config/emoms.properties
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /usr/local/oracle/product/10.2.0/db_1/sysman/config/emoms.properties.emca has been copied to /usr/local/oracle/product/10.2.0/db_1/sysman/config/emoms.properties
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /usr/local/oracle/product/10.2.0/db_1/sysman/emd/targets.xml to /usr/local/oracle/product/10.2.0/db_1/sysman/emd/targets.xml.emca.tmp
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /usr/local/oracle/product/10.2.0/db_1/sysman/emd/targets.xml has been copied to /usr/local/oracle/product/10.2.0/db_1/sysman/emd/targets.xml.emca.tmp
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: oracledb Host: [hostname] Node: null OH: /usr/local/oracle/product/10.2.0/db_1 agentHome: null isCentral: false
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: oracledb Host: [hostname] Node: null OH: /usr/local/oracle/product/10.2.0/db_1 isDBC: false
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: oracledb Host: [hostname] Node: null OH: /usr/local/oracle/product/10.2.0/db_1 isDBC: false
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_oracledb.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_oracledb.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_oracledb.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_oracledb.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /usr/local/oracle/product/10.2.0/db_1/oui
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /usr/local/oracle/product/10.2.0/db_1/oui
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [usr/local/oracle/product/10.2.0/db_1]
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /usr/local/oracle/product/10.2.0/db_1
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from /usr/local/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from /usr/local/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from /usr/local/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from /usr/local/oracle/product/10.2.0/db_1/sysman/config/emd.properties
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Jun 27, 2007 4:51:24 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /usr/local/oracle/product/10.2.0/db_1/install/staticports.ini
Jun 27, 2007 4:51:25 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
Refer to the log file at /usr/local/oracle/product/10.2.0/db_1/cfgtoollogs/emca/oracledb/emca_2007-06-27_04-51-05-PM.log for more details.
Jun 27, 2007 4:51:25 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2266)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)

Tool to create Java Object classes using the Database Tables

Hi,
Is their any tools or utility available to create the Java Object Classes using the Database Tables as input.
Lets Say I am having the Employee, Employee_Salary tables in the Database.The utility has to create the Java Object classes with the relation.
Please Help...
Thx..

Hm, for generating regular Java classes I wouldn't know one from memory. But I suggest you start searching in for example the Eclipse marketspace for a third party plugin that can do it. If all fail, you could always use Hibernate Tools from the Jboss Tools Eclipse plugin set to generate Hibernate/JPA entities and then strip the annotations from them to turn them into regular POJO classes.
How many tables are we talking about anyway? It might be less effort to just create the classes with properties and then use an IDE to generate getters and setters for them.

How do you declare objects in the master database

I am trying to register our CLR assembly as an unsafe assembly without having to make the database trustworthy. Since making the database is_trustworthy_on = 1 is not a best practice, and would cause some of our customers (and our development process)
a little bit of grief.
I have read a ton about it but am still having trouble.
The reason the assembly is 'Unsafe' is because it is calling the TimeZoneInfo class to convert between timezones, since we are not yet on UTC dates. We plan to in the future but that's a big project.
We are also not using the 'SQLCLR' but rather have written our own class library and just have a project reference to it, which works just the same, but we have found to be better for the C# programmers.
I am playing with signing the assembly using an SNK file and have figured out what I need to do, including 1) creating a master key, 2) creating an asymmetric key using the same SNK file that signed the assembly, 3) creating a login for the asymmetric key,
and 4) granting unsafe assembly to the login.
When I do all that with straight SQL, it actually works! But I am having trouble fitting this into our SSDT world.
Should I create a separate SSDT project for items #1 through #4 above, and reference it, and check 'Include composite objects' in our publishing options? As stated in this blog post though, I'm terrified of messing up the master database, and I'm not
excited about the overhead of another project, a 2nd dacpac, etc.
http://blogs.msdn.com/b/ssdt/archive/2012/06/26/composite-projects-and-schema-compare.aspx
Since we do use a common set of deployment options in a deployment tool we wrote, which does set the 'block on data loss' to false, and the 'drop objects not in source' to true, b/c we drop tables all the time during the course of refactoring, etc.
I don't want to drop anything in master though, and I don't want to have to publish it separately if we didn't have to.
I suppose I could just have some dynamic SQL in a pre-deployment script that takes care of the master database, but I was trying to do it the 'right' way, in a declarative style, but struggling.
So, in short, what's the recommended approach for getting an 'unsafe' CLR assembly into an SSDT project?
The error that started all this was:
CREATE ASSEMBLY for assembly *** failed because assembly *** is not authorized for PERMISSION_SET = UNSAFE.
The assembly is authorized when either of the following is true:
the database owner (DBO) has UNSAFE ASSEMBLY permission and the database has the TRUSTWORTHY database property on;
or
the assembly is signed with a certificate or an asymmetric key that has a corresponding login with UNSAFE ASSEMBLY permission.
Also, would a certificate be better than an asymmetric key? I'm not entirely sure of the difference just yet to be honest.
Thanks,
Ryan

After much fighting with this, figured something out as a workaround, and thought I'd share it.
First, I'm pretty certain the SSDT declarative way for these master objects just doesn't work yet.
My workaround was to make a pre-deployment script (that runs when we create new databases, as well as for the current release), that takes care of the security items needed to support a signed CLR assembly with unsafe permissions.
One issue we were running into was when it came to creating the asymmetric key, there are 4 ways to do so, and we didn't want to depend on a hard-coded/absolute file path. The 4 ways are "From file", "from external file", "from
assembly", or "from provider". I still don't 100% understand the from provider way, but ultimately we are actually using the from assembly way, with a little trick/hack I did that allows us to not have to use the 'from file' way and to
reference a hard-coded path on someone's C:\ drive. I really really didn't want to do that b/c we create local dev databases all the time and not everyone has the same paths setup. Also, our databases are deployed on our servers as well as remote-hosted-customer
servers, and up until now, the database release has not needed file system access. Even the CLR itself is created using assembly_bits, which is awesome.
So I thought of something...
What if I had a simple/temporary assembly, which I create from assembly_bits, use to import the public key from, through the create asymmetric key from assembly command, and then drop as if it never existed?
Well...it works!
Here is my current prototype of a pre-deployment script, which I'll go through and cleanup more, but thought I'd share. I also want to document how I created the temporary assembly_bits in case anyone ever wants or needs to know, even though they really
shouldn't. But it should make them feel better. Basically I just created did this to get them:
1 - Created a C# Class Library project in the solution.
2 - Added our .SNK to that project and removed the 'Class1.cs' that it created by default
3 - Signed that class library with the .SNK
4 - Added a project reference to that class library from the main database solution.
5 - Generated a deployment script (but didn't run it) and grabbed the create assembly statement (copy/paste)
6 - Deleted the temporary project
7 - Pasted the code I had copy/pasted into the pre-deployment script
Note that the objects do apparently need to go into MASTER, so at the end of the pre deployment script, I switch back to the automatic [$(DatabaseName)] after first having done USE master.
Hope this helps someone. Finally got it!
BTW - The other way we almost used was to introduce a SqlCmdVariable of $StrongNameKeyFilePath but that would have been a hassle for people to set whenever they got a new machine, etc.
Thanks,
Ryan
PRINT '**************************************************************************'
PRINT 'Pre\SetupMasterDatabaseKeysAndLoginsIfNecessary.sql'
PRINT '**************************************************************************'
PRINT '************************************************************************************'
PRINT 'If they do not already exist, create the database master key, as well as the asymmetric'
PRINT 'key, from the Strong-Named File (.SNK) which signed the CLR assembly. Finally, also'
PRINT 'create a login from that asymmetric key and grant it the UNSAFE ASSEMBLY permission.'
PRINT 'This is all necessary b/c the CLR currently has to be referenced for UNSAFE permissions'
PRINT 'in order to access the TimeZoneInfo class. This code and these objects can be removed'
PRINT 'if the system is ever updated to use all UTC dates and no longer requires the TimeZoneInfo class.'
PRINT '************************************************************************************'
USE master
PRINT N'Creating Temporary Assembly [Wits.Database.AsymmetricKeyInitialization]...'
CREATE ASSEMBLY [Wits.Database.AsymmetricKeyInitialization]
AUTHORIZATION [dbo]
FROM 0x4D5BlahBlahBlah;
IF NOT EXISTS (SELECT 1 FROM sys.symmetric_keys WHERE name LIKE '%DatabaseMasterKey%')
BEGIN
PRINT 'Creating Master Key...'
CREATE MASTER KEY
ENCRYPTION BY PASSWORD = 'I Removed This Part For This Post'
END
IF NOT EXISTS (SELECT 1 FROM sys.asymmetric_keys WHERE name = 'ClrExtensionAsymmetricKey')
BEGIN
PRINT 'Creating Asymmetric Key from strong-named file...'
CREATE ASYMMETRIC KEY [ClrExtensionAsymmetricKey]
FROM ASSEMBLY [Wits.Database.AsymmetricKeyInitialization]
END
IF NOT EXISTS (SELECT 1 FROM sys.server_principals WHERE type_desc = 'ASYMMETRIC_KEY_MAPPED_LOGIN' AND name = 'ClrExtensionLogin')
BEGIN
PRINT 'Creating Login from Asymmetric Key...'
CREATE LOGIN [ClrExtensionLogin] FROM ASYMMETRIC KEY [ClrExtensionAsymmetricKey]
PRINT 'Granting Permissions to Login created from Asymmetric Key...'
GRANT UNSAFE ASSEMBLY TO ClrExtensionLogin
END
PRINT N'Dropping Temporary Assembly [Wits.Database.AsymmetricKeyInitialization]...'
DROP ASSEMBLY [Wits.Database.AsymmetricKeyInitialization]
USE [$(DatabaseName)]

Access key needed when creating a new database table with SE11

Hi,
I'm using SAP Testdrive (evaluation) on linux in order to learn a bit about ABAP programming. I want to create a new database table in the dictionary to be used in my programs. I proceed in the following way:
1) I run the SE11 transaction
2) At the first entry I write the name of the table to be created (in the Database Table field)
3) I click on the create button.
But then the system asks me an Access Key to register, where can I get this?
Thanks in advance,
Kind Regards,
Dariyoosh

Ok I found the answer to my question in another thread
Developer Key
Make sure that your program names starts with "Z" or "Y", otherwise the system will ask you to register the object because it thinks you are creating/changing in the SAP namespace.
In fact this was my error, my table name didn't start with neither "Z" nor "Y".
Kind Regards,
Dariyoosh
Edited by: dariyoosh on Nov 13, 2010 12:34 PM

Error while creating physical standby database using Oracle Grid 10.2.0.5

Hi All,
I am setting up data guard using oracle grid.
Primary database version: - 10.2.0.4
Standby database version: - 10.2.0.4
Primary OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
Standby OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
I am creating physical standby database using EM. But it is getting failed with error message in sqlnet.ora file
Fatal NI connect error 12533, connecting to:
(DESCRIPTION=(ADDRESS_LIST=)(CONNECT_DATA=(SERVICE_NAME=INPRDSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=indb50.oii.com)(USER=oracle))))
VERSION INFORMATION:
        TNS for Linux: Version 10.2.0.4.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
Time: 17-AUG-2010 02:40:07
Tracing not turned on.
Tns error struct:
    ns main err code: 12533
    TNS-12533: TNS:illegal ADDRESS parameters
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0As we can see, address_list is empty.
Can anyone suggest what could be the reason behind this?

Dear user13295317,
Here is the error explanation;
Oracle Error :: TNS-12533
TNS:illegal ADDRESS parameters
Cause
An illegal set of protocol adapter parameters was specified.
In some cases, this error is returned when a connection cannot be made to the protocol transport.
Action
Verify that the destination can be reached using the specified protocol.
Check the parameters within the ADDRESS section of TNSNAMES.ORA.
Legal ADDRESS parameter formats may be found in the Oracle operating system specific documentation for your platform.
Protocols that resolve names at the transport layer (such as DECnet object names) are vulnerable to this error if not properly configured or names are misspelled.Hope That Helps.
Ogan

How to make the fields of BPM object not saved in database.

Is it possible to declare some attributes of BPM object not saved in database.
For example: Order has attribute orderId and date, user (other attributes)... we only want OBPM save orderId. We want the other attributes could be saved and retrieved by external DAO classes.
We still want to use the OOTB presentation from BPM object (not the customer jsp).
Thanks

When you say:
Is it possible to declare some attributes of BPM object not saved in database.do you mean you do not want the information stored in the Oracle BPM Engine's database?
If this is the case, create a BPM Object with just two attributes. One would store your orderId as a primitive data type. The other attribute would be a BPM Object that would store all the other data you are going to retrieve from the external database.
At the beginning of the screenflow, read the database using the orderId attribute and populate the other attribute (the BPM Object). At the end of the screenflow just before it flows to the end activity, you could set the second attribute (again, the BPM Object attribute) to null. This would keep the BPM object with the two attributes from storing anything but the orderId in the Engine's database table for the work item instance.
Dan

Creating automatically "OracleBI Spreadsheet Add-In" files (Excel files)

I have the necessity of create automatically an excel file with a query to a multidimensional model (ROLAP Cube). It exists any API for a programation language that makes easy this process of creation?
How "OracleBI Spreadsheet Add-In" saves the metadata in the excel file, for example, the information about the database (host name, database name), dimensions and measures selected by the user when a query is made with the "Query Builder"?
It is possible to share any information about this subject?
Thanks!!!
Rui Torres

I exported to xml an excel file with a query, that was produced by the âQuery Builderâ, and it is true that the metadata that contains the information about the database, dimensions and measures selected, is specified in xml and is stored in hidden sheets.
My problem is not to create an excel file (create sheets, write in the cells,...) because it exists some apis that do this kind of operations.
My difficulty, is to produce the xml metadata, that is defined by Oracle, and contains the information that is used by "OracleBI Spreadsheet Add-In" to put the data in the cells of an excel sheet.
What I want to know is, for example, if exists any kind of function that receives the name of the host, the name of the database, the owner of the cube, the cube name and all the options that we can choose in the âQuery Builderâ (measures and dimensions that we want, the disposition of the dimensions - layout), and return a String with the Oracleâs xml metadata.
With this xml metadata that is returned, I am prepared to create an excel file, that have the functionality of to connect to a database, and get the data that is stored in it.
Thanks!!!
Rui Torres

How to create a new DataBase using Oracle 10g Express Edition???

Hello, I am new to Oracle, I am used to Microsoft SQL Server (Enterprise Manager).
Here in Oracle I do not get how do I create a DataBase, and then create tables on it.
could anyone please explain to me how to do it?

A SQL Server database is roughly equivalent to an Oracle schema.
You should rarely need to create a new database. If you do need to create a database, get a 'for fee' edition of Oracle and use the dbca tool (Database Configuration Assistant) to do that. In fact, you are only allowed to have one XE database on the machine.
However, you can create as many schemas in an existing Oracle database as you need. (One schema, owned by userid SYS, is roughly equal to your 'master catalog'.)
You can create other schemas simply by
1) creating a userid that will own the schema (one designated for maintenance of the schema);
2) grant that userid appropriate privileges, such as 'CREATE TABLE', 'CREATE VIEW' as shown in the SQL Reference manual under the GRANT section;
3) provide that userid with a quota in one or more tablespaces (see the CREATE USER command in the SQL Reference manual);
4) create the objects, such as tabels, views, sequences, stored procs and functions, etc. (as in the SQL Reference manual);
5) create the users who will access the objects, and grant them the CREATE SESSION capability (as in the SQL Reference manual);
6) grant access (select, update, execute, etc.) on the schema objects to these users (as in the SQL Reference manual);
7) if desired, create synonyms on the schema objects so the users do not need to use fully qualified syntax such as "SELECT col FROM schema.table;" (as in the SQL Reference manual).
In case you are interested in looking at the SQL Reference manual, it can be found at http://www.oracle.com/pls/db102/portal.portal_db?selected=1 ;-)

Insert data from java to oracle object created

Hi
How can i insert data from java to table test with column LIST_QRY_RES_DN_MEMBER_INFO as below after create object type
CREATE OR REPLACE TYPE QRY_RES_SERVICE_VALUES AS OBJECT (
PARAMETER_CODE            VARCHAR2(60),
PARAMETER_VALUE           VARCHAR2(60)
CREATE OR REPLACE TYPE LIST_QRY_RES_SERVICE_VALUES AS TABLE OF QRY_RES_SERVICE_VALUES;
CREATE OR REPLACE TYPE QRY_RES_OPTIONS AS OBJECT (
SERVICE_CODE            VARCHAR2(60),
SERVICE_VALUE           LIST_QRY_RES_SERVICE_VALUES
CREATE OR REPLACE TYPE LIST_QRY_RES_OPTIONS AS TABLE OF QRY_RES_OPTIONS;
CREATE OR REPLACE TYPE QRY_RES_MEMBER_INFO AS OBJECT (
VARIABLE_CODE            VARCHAR2(60),
VARIABLE_VALUE           VARCHAR2(120)
CREATE OR REPLACE TYPE LIST_QRY_RES_MEMBER_INFO AS TABLE OF QRY_RES_MEMBER_INFO;
CREATE OR REPLACE TYPE QRY_RES_DN_MEMBER_INFO AS OBJECT (
DN                       VARCHAR2(60),
MEMBER_INFO              LIST_QRY_RES_MEMBER_INFO,
OPTIONS                  LIST_QRY_RES_OPTIONS
CREATE OR REPLACE TYPE LIST_QRY_RES_DN_MEMBER_INFO AS TABLE OF QRY_RES_DN_MEMBER_INFO;
CREATE TABLE test(
DN_MEMBER_INFO          LIST_QRY_RES_DN_MEMBER_INFO,
NESTED TABLE DN_MEMBER_INFO STORE AS LIST_QRY_RES_DN_MEMBER_TAB
    (NESTED TABLE MEMBER_INFO STORE AS MEMBER_INFO_TAB,
     NESTED TABLE OPTIONS STORE AS LIST_QRY_RES_OPTIONS_TAB
        (NESTED TABLE SERVICE_VALUE STORE AS SERVICE_VALUE_TAB));

It appears you are trying to store java objects (types) in a database rather than raw data (string, int, date types) that the object contains. If so, I don't think that ever really caught on. Most programmers store the raw data, then pull it out and populate a class. The problem with storing the object is that new versions of classes come out and your old version is stored in the database. If you just store the data, you don't have to worry about what version is in the database. You can populate the new version of the class with the same data.
Also, others can use sql to query your data and use it for their own use independent of what you intended it for. I think most people use the (browser) based utility that comes with the database to create the tables, normalize them, set up primary keys, set up foreign keys, etc rather then run an sql statement as you did above.

How to create a new database and use it?

Hi there,
I have so many tables in the current database that i'm working on. When i start to create a new table such as employee, student, person...etc it doesnt allow me to create them becuase it says the tables exists. Even when i use the drop command to drop the tables, doesn't help. So most of the time i have to create a table with postfix of 1, 2 to the table name.
Therefore i need to create a database for every project that i do.
How do i create a new database?
Then how do i use the database that i just created?
Then how do i find the out whats the database that i'm currently working on?
Thanks!
Message was edited by:
dingdong
Message was edited by:
dingdong

A database is a physical set of files that contains many schemas. Each schema has a one to one relationship with database users, so to create a new schema you create a new database user.
e.g.
CREATE USER fred IDENTIFIED BY fredspassword;Then, by logging on as fred you can create all the new tables you like as that user, in that users schema.
If you create a new database then you will find you cannot access functions/procedures, packages, tables etc. that exist in another users schema without creating a database link to the other database that contains them.
If you just create a new schema, you can more easily get at other users schema objects (tables, packages etc.) by referencing them with the users name e.g. JOE.TABLE1 providing that user has given permission for your user to access them. You can also create synonyms that allow you to reference other users schema objects as if they exist in your own e.g. you can have something called TABLE1 in your own schema that is in fact referencing JOE.TABLE1.
Message was edited by:
BluShadow
remove quotes from password. oops! thanks padders

"Create Application from Database" and BLOB type

Hi all,
I see many threads about BLOB type but my question is related to the Flex Builder built-in feature "Create Application from Database".
Is there a way or a sw version to automatically use MySQL BLOB types when creating a PHP/database application?
Thank you!

Hi Dave,
Would you please file a bug with all the necessary details
regarding this issue? The bug base is found at:
http://bugs.adobe.com/jira.
We’ll look into this. Thank you for letting us know!
Lacra

How to create a Cloning Database

Dear all,
Would you plz help me with How to create a Cloning Database in Oracle9i and Windows 2000 Server
and how to automatically synchronize the cloned database with data
Thanks,
Ahmed Abd El Latif

Oracle Data Guard Concepts and Administration
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96653/toc.htm
theres the answer to your question.
In big detail.
i hope it helps

Repository EPM - Object created automatically in database

Similar Messages

Maybe you are looking for