[REQ] help on rtl8180

okay so i've got arch installed on this gateway laptop that uses an realtek rtl8180, there was a package build but it stopped working in the 2.6.16 and above kernel's (wouldn't make) so i tracked down a couple patches and but now i can't get it to install to a non-system directory (i.e. the standard pkg diectory that abs looks for) yeah so could i get some help?
sources:
cvs -z3 -d :pserver:[email protected]:/cvsroot/rtl8180-sa2400 co -D 20060805 -f ieee80211
cvs -z3 -d :pserver:[email protected]:/cvsroot/rtl8180-sa2400 co -D 20060805 -f rtl818x-newstack
patches:
http://sourceforge.net/tracker/index.ph … tid=667396
thanks for anything.

got a PKGBUILD?
for most modules, you dont need to use their own install setup, because they're generally crap. Just use the 'install' command and install the module in the correct location in the source tree yourself.
James

Similar Messages

Req help in conversion of string to array of args

Hi,
i need help in converting a string into array of args just like command line args
i have a string s1 = 12 13 56 etc
now i want to copy that into an array a[]
a[0] = 12
a[1] = 13 etc
Thanks for help

U can use String tokenizer.Why prefer that over split?Yah Bobby u can use split too..
J2SE 1.4 added the split() method to simplify the task of breaking a string into substrings, or tokens.
Thanks BigDaddy.. I realized after you told.
try this too..
String str = "Your string";
String[] arr = str.split (" ");
for (int i=0; i < arr.length; i++)
System.out.println (arr);

Req Help on Query name

Hi All
I need a report where we can see the User Usage of queires,,
I Have installed Statistics also, but not able to find the exact query. If anybody worked please let me know.
Or let me know how to create a custom query
Appreciate your help
Regards,
Ashwin

Hi Varun,
If you have installed technical content then you can find Usage statistics by using below queries.
0TCT_MCA1_Q0141 - No.of BI Application Object Executions per User
0TCT_MCA1_Q0142 - No.of Executions per BI Application Object
0TCT_MCA1_Q0143 - No.of BI Application Executions per User
0TCT_MCA1_Q0144 - No.of Executions per BI Application
For more details check below link
http://help.sap.com/saphelp_em70/helpdata/en/cc/c28ef76cf247a2b221d8ec588cf35d/content.htm
Regards,
Ashish

Req help with fx5200-vtd128 no display out of box

new assembly, monitor cannot see card with either the reg vga or dvi with vga adapter.
-monitor does work, tested with other system
-ps appears good the fan on vga card turns
-cleaned pins and reseated
-mobo setup is correct i think, checked it 3 times. it
has 4 jumpers
-mobo appears ok but cannot confirm till later
- do not have additional system to swap test card in
thanks for any help or ideas
soltek nv400-l64 single channel
nforce2 400 north bridge
nforce2 mcp south bridge
nforce mcp 10/100 onboard lan
amd barton athlon xp 2500
512mb corsair cmx512 2700
msi fx5200-vtd128
xaser III 2k
450w ps
wd 80gb 7200 8mb
no os, just assembled

Just a thought - had a friend with an FX5900 on an nForce chipset which would not show anything on the display. Another VGA card put in its place had the same problem. The mobo (an MSI) had two jumpers to set it in safe mode (100Mhz bus speed). After flipping these into position and turning it on there was the display!!
Reset items in BIOS and jumpers and the system went on without problem. Maybe your board has the same jumpers.
Just a thought!

REQ:Help updating lg spectrum

I've successfully downloaded the update file, but during the update, everything stops and my lg spectrum reboots without the update being applied. I've had this cell phone about two months and its the same thing. Any help or work around will be greatly appreciated.

you didn't root your phone, did you?

Req help: creating access-lists

cisco 2651XM router
IOS: c2600-adventerprisek9-mz.124-15.T8.bin
connected to internet by wic1-adsl card
I would like to configure my router to block the following ranges of ip's.
Start IP End IP
69.25.60.0 69.25.61.255
208.111.154.0 208.111.154.255
209.249.86.0 209.249.86.255
problem is I'm beginner level at configuring the cisco router so I'd appreciate help in knocking up a set of access lists that will do this job. Thanks for any advice.

Also, one final note, 12.4(15)T8 supports named ACL's, as does almost any IOS these days. This is a highly recommended practice.
I have seen several times on our network where someone wants to remove a subnet from a numbered ACL and enters the following command...
no access-list xxx deny ip 208.111.154.0 0.0.0.255 any
Unfortunately, the router just reads this as no access-list xxx and deletes the entire ACL. The recommended way to do this would be as follows...
ip access-list extended
deny ip 62.25.60.0 0.0.1.255 any
deny ip 208.111.154.0 0.0.0.255 any
deny ip 209.249.86.0 0.0.0.255
exit
interface x/x
ip access-group
end
Named ACL's are also typically easier to find in the config. For example, if you were to use a numbered acl, say ACL 5, and later need to find where all it is used, you would have to search the config for "5" and that could appear many, many times. One final recommendation I make is that you use all caps when naming anything in your configuration. This makes it pretty simple to see what is something you named versus what is part of the routers parser syntax.

Req Help to Update LIKP-LIFSK,Delivery Header block through custom program.

Hi everyone,
Can you please suggest a FM or BAPI to update the delivery header block field, LIFSK, in LIKP table through FM or a BAPI.
I tried using 'BAPI_OUTB_DELIVERY_CHANGE' as below to update the LIKP-LIFSK, but it is not working.
DATA : ls_likp TYPE likpvb,
       ls_dlv_header TYPE bapiobdlvhdrchg,
       lt_dlv_items_control TYPE STANDARD TABLE OF bapiobdlvitemctrlchg,
       ls_dlv_item_control TYPE bapiobdlvitemctrlchg.
DATA : ls_dlv_hdr_control   TYPE bapiobdlvhdrctrlchg,
       ls_dlv_techn_control TYPE bapidlvcontrol,
       lt_bapireturn TYPE STANDARD TABLE OF bapiret2,
       ls_bapireturn TYPE bapiret2,
       lt_bapiext2 TYPE STANDARD TABLE OF bapiext,
       ls_bapiext2 TYPE bapiext.
DATA : BEGIN OF ls_mns_of_del,
             vbeln TYPE likp-vbeln,     "delivery number
             lifsk TYPE likp-lifsk,     "means of transport
       END OF ls_mns_of_del.
CONSTANTS : lc_del_blck           TYPE bapiext-param VALUE 'LIKP-LIFSK'.
PARAMETERS : p_dlv TYPE likp-vbeln OBLIGATORY." OBLIGATORY.
SELECT SINGLE *
FROM likp
INTO ls_likp
WHERE vbeln = p_dlv.
CHECK sy-subrc = 0.
CLEAR : ls_bapiext2.
ls_mns_of_del-vbeln = ls_likp-vbeln.
ls_mns_of_del-lifsk = 'BX'.
ls_bapiext2-param = lc_del_blck .
ls_bapiext2-value = ls_mns_of_del.
APPEND ls_bapiext2 TO lt_bapiext2.
CALL FUNCTION 'MAP2E_LIKPVB_TO_BAPIOBDLVHDRCH'
EXPORTING
    likpvb          = ls_likp
CHANGING
    bapiobdlvhdrchg = ls_dlv_header.
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
EXPORTING
    header_data           = ls_dlv_header
    header_control        = ls_dlv_hdr_control
    delivery              = ls_likp-vbeln
    techn_control         = ls_dlv_techn_control
TABLES
    extension2            = lt_bapiext2[]
    return                = lt_bapireturn[]
EXCEPTIONS
    communication_failure = 1
    system_failure        = 2
    OTHERS                = 3.
IF lt_bapireturn[] IS INITIAL.
COMMIT WORK AND WAIT.
MESSAGE 'Success' TYPE 'I' DISPLAY LIKE 'S'.
LEAVE LIST-PROCESSING.
ELSE.
MESSAGE 'Error' TYPE 'I' DISPLAY LIKE 'E'.
LEAVE LIST-PROCESSING.
ENDIF.

Hi ,
After seeing your code, you are not passing any parameters to header control data. once check the below code, it might useful.
DATA: h_data like bapiobdlvhdrchg,
         h_control like bapiobdlvhdrctrlchg,
        delivery like bapiobdlvhdrchg-deliv_numb,
        item_data like bapiobdlvitemchg occurs 0 with header line,
        item_control like bapiobdlvitemctrlchg occurs 0 with header line,
         return like bapiret2 occurs 0 with header line.
        CLEAR: h_data, h_control, delivery, item_data, item_control,
               return.
        REFRESH: item_data, item_control, return.
       h_data-deliv_numb = gst_alv_table-c6_vbeln.
       h_data-dlv_block = p_new_del_blck.         "the new delivery block
       h_control-deliv_numb = gst_alv_table-c6_vbeln.
       h_control-dlv_block_flg = 'X'.
       delivery = gst_alv_table-c6_vbeln.
          CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
              EXPORTING
           header_data                   = h_data
         header_control                = h_control
          delivery                      = delivery
           TABLES
            return                        = return .
         "Check if return table got an error.
         READ TABLE return WITH KEY type = 'E'.
            IF NOT sy-subrc IS INITIAL.
           CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
               EXPORTING
              wait = 'X'.
             ELSE.
         ROLLBACK WORK.
                        ENDIF.
Regards,
Parupelly

Req. help on converting int value to a character(ASCII?)

I have an array, letter[x]...where x is an int from 0 to 26. Each element is storing the freq of a particular letter in a piece of text.
how do I convert back so that I can store the most freq letter in a string...I presume it's by using the ascii code but I don't know how.
here's the problem code...
if (letter[x]>currentMostCommon)
mostCommonLetter=x; // Don't want value of x, I want ascii for letter "a" ie. x+97
}

Yes, it was meant to be 0-25...silly error.
Thanks for the advice, however your suggestion gives an error:
C:\MYDOCU~1\SUBJECTS\COMPPR~1\MYPROG~1\ASSIGN2\AnalyseText.java:61: possible loss of precision
found : int
required: char
char c= 'a' + x;
any suggestions?
Paul

Req Help for "warning: sun.misc.SignalHandler is Sun proprietary API "

Hi All,
I am getting the below exception when i am building the class. Please guide me and please provide any alternate solution for this.
[javac] main\SignalHandler.java:35: warning: sun.misc.SignalHandler is Sun proprietary API and may be removed in a future release
[javac] implements sun.misc.SignalHandler
[javac] ^
[javac] main\SignalHandler.java:69: warning: sun.misc.Signal is Sun proprietary API and may be removed in a future release
[javac] public void handle( final sun.misc.Signal signal )
[javac] ^
[javac] auditlog\core\AuditLogFileWriter.java:26: warning: com.sun.org.apache.xalan.internal.xsltc.runtime.Hashtable is Sun proprietary API and may be removed in a future release
[javac] public static Hashtable writingStatus=new Hashtable();
[javac] ^
[javac] ftpcommon\ftp\PasswordEnDecrypt.java:156: warning: sun.misc.BASE64Encoder is Sun proprietary API and may be removed in a future release
[javac] return new sun.misc.BASE64Encoder().encode(enc);
[javac] ^
[javac] ftpcommon\ftp\PasswordEnDecrypt.java:182: warning: sun.misc.BASE64Decoder is Sun proprietary API and may be removed in a future release
[javac] byte[] dec = new sun.misc.BASE64Decoder().decodeBuffer(str);
[javac] ^
[javac] ftpcommon\main\SignalHandler.java:57: warning: sun.misc.Signal is Sun proprietary API and may be removed in a future release
[javac] sun.misc.Signal.handle( new sun.misc.Signal(signalName), this );
[javac] ^
[javac] main\SignalHandler.java:57: warning: sun.misc.Signal is Sun proprietary API and may be removed in a future release
[javac] sun.misc.Signal.handle( new sun.misc.Signal(signalName), this );
Thanks & Regards,
Rajeshwar
Edited by: Rajeshwar_Java on Apr 27, 2009 5:31 AM
Edited by: Rajeshwar_Java on Apr 27, 2009 5:32 AM

as corlettk already told you: avoid those API whenever possible.
Regarding your cases:
* SignalHandler: proprietary API, there's not alternative. Use it if you must. Fail gracefully if it isn't there
* Hashtable: seems like you simply picked the wrong one. Use the one in java.util
* Base64 stuff: Plenty of free (BSD licensed) implementations out there, I'm sure there's one in commons-codec as well. Use those instead.

Continuous track cd

XP Pro SP3: 2 Gb memory: 1.8 Processor: Audition 3:
New boy in town... req. help.
I have recorded an original music cd. There are 12 tracks on it overlaid on a continuous backing track of relaxation sounds. When the CD is played it shows up as 'track 1' only. I would like to be able to enable 'skip track' or 'fast forward' to next track & to show all tracks as numbered tracks. In desperation I have generated a 5 second silence between each track, but the CD still reads as 'track 1' only. Is it possible to achieve what I want without re-recording the whole project again? Thank you. Hugh

>Is it possible to achieve what I want without re-recording the whole project again?
Recording the whole project again would just give you the same result!
Fortunately, there's a way to achieve exactly what you want - and it's what you would have to do at this stage anyway:
Firstly, set the time format (right click on the timeline) so that it is set to Compact Disc 75fps. Then set the the snapping to 'frames' - this prevents tracks being put where a CD physically can't put one.
Then you need to put a marker at every point in your continuous file (minus the gaps you put in, of course...) where you want a new track to start. And that includes a marker at the start and finish of your file as well. Everywhere you want one, place the cursor and hit F8.
Now go to Window>Marker List and highlight all of your marker points (swipe them all with the mouse). You can now set them all to 'track' cue types, and then, if you swipe them all again and click on the 5th button along at the bottom of the pane, you can do the important bit - this is the 'merge selected' button, and it merges all of your track marks into ranges.
At this point, when you open the CD page, you will see all of the ranges you just created displayed in order, under the file name. Pick them up, and place them in order on the CD playlist, and make sure that the pause between each one is set to zero (it should happen automatically). Now, when you write your CD you should be able to jump between tracks, but if you play the entire CD, it should be continuous.
Hope that helps...

BDC help req??

Hi
Can any one tell me to use 2 BDC simultaneously at a time in 1 single report.
I had an req like to make a BDC for MIGO & same time after its done the BDC for Tcode J1IEX has to be called,so can any one tell me some info for it.
As its a reprot programing,I need to disply the final data like GRN No. after MIGO had been done & Exc Invoice No after J1IEX had been done on a single page in an ALV form .
Please help me in this,I had made a reprot for it,but I am not able to make 2 BDC working at the same time.
So plz tell me how to do ??
Regds

Hi,
I had done in my previous project, that was production order creation, conformation and one more. You can check is there any BAPI's exist for you to update the data.
Rgds,
Bujji

Urgent help req : work item id not getting passed in the method

Hi ,
I have created a subtype zcats of business object CATS and delegated it .
I have created a new method Approve1 ( with attributes SYNCRONUS & DIALOG ) in zcats which is similar in coding to Approve method of CATS ( DIALOG) .
I have include the method Approve1 of business object zcats in a standard task .
The problem is that when the eorkflow gets triggered , the workitem id is not getting passed in the method APProve1 of zcats.
Can someone please help me with this .
Points would surely be awarded .

BEGIN_METHOD APPROVE1 CHANGING CONTAINER.
DATA: WORKITEMID_IMP LIKE OBJECT-KEY-ITEMID.
DATA: WI_CHCKWI LIKE SWWWIHEAD-WI_ID.
DATA: WORKITEM TYPE SWC_OBJECT.
   <u> WORKITEMID_IMP = OBJECT-KEY-ITEMID</u>.
    SWC_GET_ELEMENT CONTAINER '_WORKITEM' WORKITEM.
    SWC_GET_PROPERTY WORKITEM 'WorkitemReference' WI_CHCKWI.
    IF SY-SUBRC EQ 0 AND NOT WI_CHCKWI IS INITIAL.
      WORKITEMID_IMP = WI_CHCKWI.
    ENDIF.
    CALL FUNCTION 'CATS_WF_APPROVAL'
      EXPORTING
        WORKITEMID_IMP = WORKITEMID_IMP
      TABLES
        CONT_IMP = CONTAINER.
END_METHOD.
hi ,
the above is the code in the method .
At the first step of execution underlined above , the work item id is appearing blank .
I think that the value is not passed to the container , but i am not sure og how to pass data to this conatiner

Issue in WAD Dropdown box functionality. Help req.

Hello,
Issue in WAD and Bex.
I have two dropdown boxes in the web templates, for ex cost center and controlling area.
DDBox1: Controlling Area.
DDBox2: Cost center.
Step1: I am selecting Controlling area 4002
Step2: I am selecting cost center 691
Step3: Now I want to change the cost center to 4001.
When I change the cost center to 4001 in Dropdown box1
the filter(Selected value 691) set in the Dropdown 2(for cost center) is not removed or reset,
so that it shows no applicable data found even though there is data for the controlling Area 4001(DDBox2)
Some one please guide me to solve this
Thanks in advance!
Kind regards
RaM

Hello,
Some one please help me on this topic.
If any further informations required i can give .
Thanks
RaM

How to have a search help in module pool without using Process on value req

Can someone please tell me what r the ways if any to have F4 help in the module pool screen
with out using POV ?

Hi,
They are two ways to define search help for an object...
BY using POV
or
go to screen Layout and double click on the field you want F4 help and Pass the Search help math code for feild at the
place of Search_help field aand also you can add parameter-id at this place to provide search help.
go to screen Layout -->double click on the field you want F4 help
-->Pass the Search help math code for feild at the place of Search_help
save and activate..
reagrds,
Prabhudas

Urgent Help Req.: Exception=ORABPEL-11162 Error while reading native data

Hi All,
I am getting below error: Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7|http://forums.oracle.com/forums/] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
Let me also give you the brief scenario of what I am trying to achieve.
INTERFACE FUNCTIONING:_
I have an interface which reads the records in a file in a chunk through ChunkRead adapter and and after one successful reading if chunk it calls the DB adapter to insert the records in the table.
Now these records are committed and next chunk is read and the process goes on till all the records are read.
After this the API is called which does the processing of these records.
Inserting records in the DB is a XA transaction which means if anything goes wrong while inserting the data, the records which are added earlier are rolled back.
ISSUE:_
Now the issue comes when I do the negative testing. Since my file is based on fixed length schema., I change the length of last record from 15 to 13. (say total are 10 records)
Now what happens is when chunkread tries to read the record of 15 length it gets only 13 characters and hence ignores the records.
But the chunkread reads all other 9 records correctly and sends this to DB adapter which now inserts them correctly in the DB.
But being a global transaction I want that if any record is missing from DB in comparison to those in file then whole transaction should roll back.
So I am unable to make this whole process as global transaction. This is because the ChunkRead adapter inspite of detecting the error doesn’t throw it back.
Moreover if this problem occurs in say next chunk then also I am unable to find out how to rollback the whole transaction. Because the first chunk was correct.
So basically two concerns are there:+
How to detect that chunkread adapter has missed one record?+
Secondly, If it’s detected then how should I rollback the transaction that caused earlier records to enter into database?+
Please let me know if anyone has faced this issue earlyer and how it got resolved. Any pointers regarding this would be of great help.
Also attached is the chunkread log for reference.
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage errList=[oracle.tip.pc.services.translation.xlators.nxsd.ErrorList@a5213b]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage badCount=[1]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.467-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: Rejecting message fileName=/rh01/s01/n01/Distributions/B2B/Gentran/In/855/Test.txt, startLine=4, startColumn=1, endLine=-1, endCol=-1, Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
}</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
PFB the version details :
SOA suite version : 10.1.3.3.1 and JDEV : 10.1.3.3
Edited by: SOA Team on Oct 6, 2008 10:48 PM

Just a thought, you could set the terminator for the last field as {eol} instead of length, this means that it should read the last field regardless of the length.
Depending on the logic of Db adapter the error could be traped due to incorrect length.
If the file starts each row with a constant(s), e.g. 01 then you can terminate the previous line on that, this is the better option but relys on the file format.
The other option is a little thing call compensation, ouch. Basically this allows you to back out commited rows but you have to provide all the logic, it is generally something people avoid because of the complexity.
cheers
James

[REQ] help on rtl8180

Similar Messages

Maybe you are looking for