Request does not contain any saved update rules; rollback not possible
Hi,
In BW on hana, there's a 3.x flow DSO where it loaded a request from PSA.
It failed due to activation error SID Generation. But unfortunately, due to PSA Deletion process chain, it's PSA Request got deleted.
Now, we couldn't delete the red request(failed request) from the 3.x flow DSO.
If we try to delete, it shows job has been completed successfully with the following message:
Job started
Step 001 started (program RSDELPART1, variant &0000000004233, user ID )
Delete running: DataStore object ZREBATE, from 630,138 to 630,138
Delete is scheduled; Selection conditions were substituted
Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
Job finished
I went to the table RSICCONT and checked the mentioned request. But I couldn't find delete option enabled. Even our basis team doesn't have authorization to delete the mentioned request from the standard table RSICCONT.
Request you to please help me how to handle this.
Regards,
Antony Jerald.
Hi Antony,
Once you have deleted the data in PSA there is no way to reconstruct the request hence you can do below things to correct it
1) Identify the No of Records which having error , because if you have more records it will take more time as in debug mode we have option to edit only one record at one.
2) Display only one record in Active table and change it using the Debug option ( not recommended ), but as you are in corner we need to use this
3) change the records with respective values and active the request again
Regards
Jagan
Similar Messages
-
Update structure does not contain any elements error
Dear Friends in am a newbie in WDA. My Function Module has the following decalarations.
TABLES
*" U_P9006 STRUCTURE P9006
*" IT_P9006 STRUCTURE P9006
IT_P9006 is used to fill all the values in the Table, if the user wants to create a new entry in the table then he will click on the new button and U_9006 will be used to hold the new value and save in the database.
when i binded U_9006-EmployeeNumber to a Input box to accept values and tested the application dumps giving the error
"Adapter error in INPUT_FIELD "TC_1_EMPLOYEE_CODE" of view "ZHOLIDAY.MAINVIEW": Context binding of property STATE cannot be resolved: Node COMPONENTCONTROLLER.1.ZESS_EDU.1.CHANGING_1.1.U_P9006 does not contain any elements "
i have 3 basic questions please help me.
1. Currently the cardinality of the Node U_9006 is 0..n and Selection 0..1 , i reffered few sdn threads where it says change the cardinality to 0..n and issue will resolve , my issue is cardinality is already 0...n and even if i try to change it at the context tab it is not changing.
2. if map the INPUT BOX a String attribute ctx_employee rather than mapping it to the U_P9006-EmployeeNumber the page does not dumps , but how do i assign this ctx_employee value to the u_9006-employeenumber in the coding?
3. any sample of SAVE code so that on those lines i write SAVE coding and try to update the record.
Regards,
JackJack,
Bind_table , bind_element methods are used to insert records into NODE, not into database table.
As you said you want to insert records into custom infotype, you need to use function modules to create .
For infotype tables we use below function module to insert records
HR_INFOTYPE_OPERATION
DATA return1 TYPE bapireturn1.
DATA: wa_9006 TYPE p9006.
NOW PASS ALL THE VALUES OF WA_9006.
WA_9006-PERNR = LV_EMPID.
wa_9006-begda = " provide start date'
wa_9006-endda = ' provide end date
wa_9006-aedtm = sy-datum.
wa_9006-uname = sy-uname. ///LY PASS ALL THE VALUES OF P9006 TABLE( CHECK SE11 FOR FIELDS )
THEN CALL BELOW FUNCTION MODULE.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
infty = '9006'
number = wa_9006-pernr
* subtype = wa_9006-subty
* OBJECTID =
* LOCKINDICATOR =
validityend = wa_9006-endda
validitybegin = wa_9006-begda
* RECORDNUMBER =
record = wa_9006
operation = 'INS'
* TCLAS = 'A'
* DIALOG_MODE = '0'
* NOCOMMIT =
* VIEW_IDENTIFIER =
* SECONDARY_RECORD =
IMPORTING
return = return1
* KEY =
Hope this will be useful
Regards
Srinivas
Edited by: sanasrinivas on Feb 13, 2012 12:28 PM -
Stack file that is generated does not contain any java components
We are in process of upgrading our ecc6.0 system with ehp4. The enhancement is stuck up in configuration phase for JAVA. Though we have configured Java in solution manager the stack file that is generated does not contain any java components and so the installation is stuck up. Kindly request you to advice us on this issue .
Attached is the 'Trouble Ticket Report', PREPARE_JSPM_QUEUE_CSZ_01.LOG, and SMSDXML_EA4_20100623144541.375.txt
++++
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
SID................: EA4
Hostname...........: wipro
Install directory..: e:/usr/sap/EA4
Upgrade directory..: F:\EHPI\java
Database...........: Oracle
Operating System...: NT
JDK version........: 1.6.0_07 SAP AG
SAPJup version.....: 3.4.29
Source release.....: 700
Target release.....: 700
Start release SP...: $(/J2EE/StandardSystem/SPLevel)
Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
Current usages.....:
ABAP stack present.: true
The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
More information can be found in the log file F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
com.sap.sdt.ucp.phases.PhaseException
The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
PREPARE_JSPM_QUEUE
INIT
NetWeaver Enhancement Package Installation
SAPJup
Java Enhancement Package Installation
++++++
PREPARE_JSPM_QUEUE_CSZ_01.LOG>>
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
<!PATTERN[PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter inputFile=EHPComponents.xml
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack queue preparator.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml has finished.
Jun 28, 2010 9:21:24 AM [Error]: com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Jun 28, 2010 9:21:24 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/06/28 09:21:23.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/06/28 09:21:24.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.781.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
++++++++++++++++++++++
[stack xml data: version=1.0]
[SPAM_CVERS]
ST-PI 2005_1_7000006
LSOFE 600 0015
SAP_AP 700 0015
SAP_BASIS 701 0003
SAP_ABA 701 0003
SAP_BW 701 0003
PI_BASIS 701 0003
PLMWUI 700 0002
SAP_APPL 604 0002
EA-APPL 604 0002
SAP_BS_FND 701 0002
EA-IPPE 404 0002
WEBCUIF 700 0002
INSURANCE 604 0002
FI-CA 604 0002
ERECRUIT 604 0002
ECC-DIMP 604 0002
EA-DFPS 604 0002
IS-UT 604 0002
IS-H 604 0003
EA-RETAIL 604 0002
EA-FINSERV 604 0002
IS-OIL 604 0002
IS-PRA 604 0002
IS-M 604 0002
SEM-BW 604 0002
FINBASIS 604 0002
FI-CAX 604 0002
EA-GLTRADE 604 0002
IS-CWM 604 0002
EA-PS 604 0002
IS-PS-CA 604 0002
EA-HR 604 0005
SAP_HR 604 0005
ECC-SE 604 0002
[PRDVERS]
01200314690900000432SAP ERP ENHANCE PACKAGE EHP2 FOR SAP ERP 6.0 sap.com EHP2 FOR SAP ERP 6.0 -00000000000000
01200314690900000463SAP ERP ENHANCE PACKAGE EHP4 FOR SAP ERP 6.0 sap.com EHP4 FOR SAP ERP 6.0 -00000000000000
01200615320900001296 sap.com +00000000000000
01200615320900001469SAP ERP ENHANCE PACKAGE EHP3 FOR SAP ERP 6.0 sap.com EHP3 FOR SAP ERP 6.0 -00000000000000
01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01 +00000000000000
[SWFEATURE]
1 01200615320900001296SAP ERP 2005 sap.com SAP ERP 6.0: SAP ECC Server
19 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Discrete Ind. & Mill Products
20 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Media
21 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Utilities/Waste&Recycl./Telco
23 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Leasing/Contract A/R & A/P
24 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Retail
25 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Global Trade
26 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Supply Chain Mgmt
30 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Central Applications
31 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Strategic Enterprise Mgmt
33 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Human Capital Management
37 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas
38 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Catch Weight Management
42 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Public Sector Accounting
43 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Insurance
44 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Hospital
45 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ECC Server VPack successor
46 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: ERecruiting
47 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Defense & Public Security
48 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Services
55 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas with Utilities
56 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Defense
59 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: PLM Core
69 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: EAM config control
9 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ESA ECC-SE
++++++++++++++++Though we have configured Java in solution manager the stack file that is generated does not contain any java components
You will probably need to update Solution Manager first with a number of corrections so you can get a correctly generated stack file. Depending on your ST400 version in Solution Manager apply collective corrections from "Note 1461849 - MOpz: Collective corrections 24" or "Note 1452118 - MOpz: Collective Corrections 23". They generally deal with these kind of stack file issues.
Nelis -
How do i update 10.5.8 if my macbook does not show any software updates?
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
ORA-00339: archived log does not contain any redo
Hi All,
recently we faced 'ORA-00339: archived log does not contain any redo' issue at standby side,
after searching on Google and from Metalink (note 30866.1 and 7197445.8 ) I find out that this is the known issue for 10g and below versions, our's is 11.2.0.3,
Error in Alert Log :
Errors in file /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/trace/DWPRD_pr0a_48412.trc:
ORA-00339: archived log does not contain any redo
ORA-00334: archived log: '/redolog2/redo/redolog3a.log'
Errors in file /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/trace/DWPRD_pr0a_48412.trc (incident=190009):
ORA-00600: internal error code, arguments: [kdBlkCheckError], [1], [56702], [6114], [], [], [], [], [], [], [], []
Incident details in: /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/incident/incdir_190009/DWPRD_pr0a_48412_i190009.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Slave exiting with ORA-10562 exception
Errors in file /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/trace/DWPRD_pr0a_48412.trc:
ORA-10562: Error occurred while applying redo to data block (file# 1, block# 56702)
ORA-10564: tablespace SYSTEM
ORA-01110: data file 1: '/oradata1/database/DATAFILES/system01.dbf'
ORA-10561: block type 'TRANSACTION MANAGED DATA BLOCK', data object# 2
ORA-00600: internal error code, arguments: [kdBlkCheckError], [1], [56702], [6114], [], [], [], [], [], [], [], []
Mon Apr 15 11:34:12 2013
Dumping diagnostic data in directory=[cdmp_20130415113412], requested by (instance=1, osid=48412 (PR0A)), summary=[incident=190009].
ThanksHi,
"The archived log is not the correct log.
It is a copy of a log file that has never been used for redo generation, or was an online log being prepared to be the current log."
"Restore the correct log file."
Can you say, what is last changes on your database, On log files?
Did you copies your '/redolog2/redo/redolog3a.log' log file from other ?
Regards
Mahir M. Quluzade -
Hi,
I have a Sharepoint 2013 farm I am trying to provision search for (not the same as my other thread). However, I get the below error:
Exception calling "Activate" with "0" argument(s): "Topology does not contain any components of type Microsoft.Office.Server.Search.Administration.Topology.AdminComponent"
In my script, I have the following:
New-SPEnterpriseSearchAdminComponent -SearchTopology $clone -SearchServiceInstance $SearchServiceInstanceServer3 -ErrorAction SilentlyContinue
So I am not sure why the error happens, when I am trying to set this component. However, it's not the first component to be set (index partition on non-local servers first). I can make it first, but why does this error happen?
UPDATE: I have noticed that the usage and health proxy on my farm is/was stopped, but I am not able to access the server(s) to look at this right now. Could this cause this issue?Do you already have Admin component running for the Search Service Application?
Usage and Health Service will not cause this issue.
Please also refer to below discussion to see if it helps:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/02f0b072-aa3a-4b7f-9662-2caf373d1e57/setspenterprisesearchtopology-identity-newtopology?forum=sharepointgeneral
Warm Regards,
Bhavik K Jain
Sr. Software Engineer - SharePoint Administration
Please vote if my reply helps and ensure that you mark a question as Answered once you receive a satisfactory response. -
Get an Error window, The source folder does not contain any supported camera raw files
I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
EstherHello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.
-
Selected model does not contain any target value prior
Hi ODM experts,
I have tried to apply the SVM alg in order to find anomalous records.The table source have rows like that:
uniq_rec ID NAME A1 A2 A3 A4 A5 data
577 2052956018 NAMEHDRCP8 2.27 0.4 85.46 0.01 14.54 24-JAN-13
578 1250914484 NAMEDJDRVP3 11.45 1.24 56.24 0.01 43.77 24-JAN-13
579 1968689283 NAMEDKEND12 0.000011 6.78 0.000029 0.01 0.091 24-JAN-13
580 2063389130 NAMEDNMXG14 0.000011 0.65 36.65 0.02 0.091 24-JAN-13
unq_rec is the pk, id is the id for the generic name and A1 .. A5 attributes ,data when collection occur etc
I'm trying to execute the following code:
drop table ALG_SET;
exec dbms_data_mining.drop_model('SVMODEL');
create table ALG_SET (setting_name varchar2(30), setting_value varchar2(4000));
insert into ALG_SET values ('ALGO_NAME','ALGO_SUPPORT_VECTOR_MACHINES');
insert into ALG_SET values ('PREP_AUTO','ON');
commit;
Begin
dbms_data_mining.create_model('SVMODEL', 'CLASSIFICATION', 'ODM_PAR_FIN_HIST', 'UNQ_CRT', null, 'ALG_SET');
end;
The results is the following error:ORA-40104: invalid training data for model build ( if I run the code) .If I run from graphical interface I have obtained this
error code " Selected model does not contain any target value prior"(using the similar model - SVM for anomaly detction plus the same source table )
Please advice what is missing or wrong and if possible how to bypass this issue.
Thanks in advance for support.
Best Regards,
BogdanHere is also a newer example of creating a SVM Anomaly model from ODM sample code (12.1 version but this applies to 11.2):
Rem
Rem $Header: rdbms/demo/dmsvodem.sql /main/6 2012/04/15 16:31:56 xbarr Exp $
Rem
Rem dmsvodem.sql
Rem
Rem Copyright (c) 2004, 2012, Oracle and/or its affiliates.
Rem All rights reserved.
Rem
Rem NAME
Rem dmsvodem.sql - Sample program for the DBMS_DATA_MINING package.
Rem
Rem DESCRIPTION
Rem This script creates an anomaly detection model
Rem for data analysis and outlier identification using the
Rem one-class SVM algorithm
Rem and data in the SH (Sales History)schema in the RDBMS.
Rem
Rem NOTES
Rem
Rem
Rem MODIFIED (MM/DD/YY)
Rem amozes 01/23/12 - updates for 12c
Rem xbarr 01/10/12 - add prediction_details demo
Rem ramkrish 06/14/07 - remove commit after settings
Rem ramkrish 10/25/07 - replace deprecated get_model calls with catalog
Rem queries
Rem ktaylor 07/11/05 - minor edits to comments
Rem jcjeon 01/18/05 - add column format
Rem bmilenov 10/28/04 - bmilenov_oneclass_demo
Rem bmilenov 10/25/04 - Remove dbms_output statements
Rem bmilenov 10/22/04 - Comment revision
Rem bmilenov 10/20/04 - Created
Rem
SET serveroutput ON
SET trimspool ON
SET pages 10000
SET echo ON
-- SAMPLE PROBLEM
-- Given demographics about a set of customers that are known to have
-- an affinity card, 1) find the most atypical members of this group
-- (outlier identification), 2) discover the common demographic
-- characteristics of the most typical customers with affinity card,
-- and 3) compute how typical a given new/hypothetical customer is.
-- DATA
-- The data for this sample is composed from base tables in the SH schema
-- (See Sample Schema Documentation) and presented through a view:
-- mining_data_one_class_v
-- (See dmsh.sql for view definition).
-- BUILD THE MODEL
-- Cleanup old model with the same name (if any)
BEGIN DBMS_DATA_MINING.DROP_MODEL('SVMO_SH_Clas_sample');
EXCEPTION WHEN OTHERS THEN NULL; END;
-- PREPARE DATA
-- Automatic data preparation is used.
-- SPECIFY SETTINGS
-- Cleanup old settings table (if any)
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE svmo_sh_sample_settings';
EXCEPTION WHEN OTHERS THEN
NULL;
END;
-- CREATE AND POPULATE A SETTINGS TABLE
set echo off
CREATE TABLE svmo_sh_sample_settings (
setting_name VARCHAR2(30),
setting_value VARCHAR2(4000));
set echo on
BEGIN
-- Populate settings table
-- SVM needs to be selected explicitly (default classifier: Naive Bayes)
-- Examples of other possible overrides are:
-- select a different rate of outliers in the data (default 0.1)
-- (dbms_data_mining.svms_outlier_rate, ,0.05);
-- select a kernel type (default kernel: selected by the algorithm)
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_linear);
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_gaussian);
-- turn off active learning (enabled by default)
-- (dbms_data_mining.svms_active_learning, dbms_data_mining.svms_al_disable);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.algo_name, dbms_data_mining.algo_support_vector_machines);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.prep_auto, dbms_data_mining.prep_auto_on);
END;
-- CREATE A MODEL
-- Build a new one-class SVM Model
-- Note the NULL sprecification for target column name
BEGIN
DBMS_DATA_MINING.CREATE_MODEL(
model_name => 'SVMO_SH_Clas_sample',
mining_function => dbms_data_mining.classification,
data_table_name => 'mining_data_one_class_v',
case_id_column_name => 'cust_id',
target_column_name => NULL,
settings_table_name => 'svmo_sh_sample_settings');
END;
-- DISPLAY MODEL SETTINGS
column setting_name format a30
column setting_value format a30
SELECT setting_name, setting_value
FROM user_mining_model_settings
WHERE model_name = 'SVMO_SH_CLAS_SAMPLE'
ORDER BY setting_name; -
BI Publisher Word Template The report does not contain any data fields.
I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please helpHi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks -
Unable to load the EJB module. DeploymentContext does not contain any EJB.
I'm writing an enterprise application to familiarize myself with Glassfish 3.1.2 and EJB 3.1. I've created several local, stateless beans, and injected one into a JSF managed bean. The ejb and web modules compile fine, but when I launch the application with Glassfish I get the following startup error and the application does not deploy. I don't understand what it means, can someone ellaborate?
SEVERE: Exception while invoking class org.glassfish.ejb.startup.EjbDeployer prepare method
SEVERE: Exception while invoking class org.glassfish.javaee.full.deployment.EarDeployer prepare method
SEVERE: Exception while preparing the app
SEVERE: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
org.glassfish.deployment.common.DeploymentException: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
at org.glassfish.javaee.full.deployment.EarDeployer.prepare(EarDeployer.java:166)
at com.sun.enterprise.v3.server.ApplicationLifecycle.prepareModule(ApplicationLifecycle.java:871)
at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:410)
at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:461)
at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:212)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:860)
at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:757)
at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1056)
at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:229)
at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
at java.lang.Thread.run(Thread.java:722)My guess is that you deployed an ejb without bean in it. when you have an ejb module, be sure you have at least one bean present.
Are you sure you have implementend some beans? Or did you do this only in the web module?
Try adding an @Stateless bean doing nothing in you ejb module, redeploy and let me know if that works -
File Screening Audit Report does not contain any data : report statistics is empty
Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo -
'Document does not contain any items' error while posting GR from BAPI
Hello Friends,
I am trying to post GR from BAPI 'BAPI_GOODSMVT_CREATE' but some time it post successful and some time it does not post..gives error 'Document does not contain any items'....i have search all option but did not get any solution why this error is coming....kindly help me if you have any information regarding that.
The strange thing is i have alrady posted GR with some test data and later on again am trying to post GR with same test data but it is giving error as above.
For your information...i am using enhancement spot in standard program for GR posting...could it give any problem.
Regards,
Rajkishor.Solved by my self...problem was i were using enhancement spot in standard program because of this it was creating problem have search new enhancement spot and put my code out there now it is working fine.
Thanku very much all of you for your reply. -
Migo cannot be done " PO does not contain any selectable items"
Dear SAP Gurus
We have a very urgent issue, while trying to do MIGO for a particular standard PO.
Some down payments have been done to this PO already and now when we try to do the MIGO, system is giving the error "PO does not contain any selectable items"
The accounting document which is created when the down payment is done can be seen in the purchase order History.
Please suggest soem solution
Thanks
kkHi Kavitha,
Please check whether all the po item quantities are received. If any open line items are there then go to item detail po tab in that Select Confirmation Tab and Check whether the confirmation is Z001. Change it to 0001 etc and save.
Try this, if unresolved revert back.
Reg,
Ashok
Assign points if useful. -
J1IEX post than made error like does not contain any selectable items
Respected Sir,
We have purchase the Goods From SEZ unit and it wil be treated as import made.
We doing the following activities
1. Prepared the Import P.O.
2. released the same P.O.
3. Doing the MIRO for Custome Vendor
4. Capture the J1iex
than we fins the below mention ERROR & Diagnoses and ERROR
Document 4400000016 does not contain any selectable items
Message no. M7064
Diagnosis
The document or document item entered cannot be adopted.
Possible reasons for this are:
u2022 The document items have already been processed
(Suggest zero lines indicator set?).
u2022 the document items have been deleted or are blocked.
u2022 the document items have been created for a different plant.
u2022 (for reservations only) movements are not yet allowed for the reservation items.
u2022 (for reservations only) the document items are retrograde components of the order. These are posted using the order confirmations.
u2022 A confirmation must exist for the document items.
u2022 The document items must be released first.
u2022 The document is an R/2 document.
Procedure
Make sure your entries are correct.
u2022 If the system has already processed the total quantity, you can set the Suggest zero lines indicator. The system will suggest the quantity zero for the items that have already been processed.
u2022 If you have entered a particular item, cancel the item. If you do not enter an item, the system searches all of the open items in the document.
u2022 If the document is a purchase order, production order or a reservation, you can
Kindly doneedfull above mention error
Thanks & Regards
Bipin ShahHI,
Please check whether all the vendor and excise details have been maintained in J1id. i.e Excise rate maintainance.
Hope this helps.
Regards,
Prasanna
Award pls if helpful -
ITunes Artwork Screensaver "Your iTunes Library does not contain any songs
i have been using the iTunes Artwork Screensaver on my 1.25GHz PowerPC G4, running Leopard 10.5.2 and it has worked perfectly, showing all my album artwork. i got all the album covers from amazon.com or google. i have always kept my iTunes Library on my Boot Drive and have never moved it.
Yesterday when my computer went into screensaver mode (itunes artwork) the message "Your iTunes Library does not contain any songs with artwork"!
This is really strange, as all the albums in my library have artwork. i have also tried deleting the iTunes Artwork Screensaver preference file.
I know that there are many issues with the artwork screensaver, but i have not found a solution to this problem.
I would appreciate anyones help!i'm glad to see that i'm not the only one with this problem. i have seriously tried everything, like deleting the preference files of the itunes screensaver, using a script to embed the artwork, repairing disc permissions but i the screensaver just won't work. the message that my library does not contain any artwork still appear every time.
Maybe you are looking for
-
Need help to import and syncronize HCM pagelets with Interaction Hub, how can I do that?
Hi, I need help to import and synchronize HCM pagelets with Interaction Hub, how can I do that? The default page "Select Remote Content" of the WorkCenter "Unified Navigation WorkCenter" is not working as well, when I run the import/sync button I get
-
How do you save your photos in iPhoto and be able to find the photos when you are in different programs. When i try to find them I can only find the iPhotos not the individual photos.
-
Can't Install On This Computer message...
Hello All - A few months ago I purchased a refurbished PowerBook from the Apple website. It came with OS 10.3.9 installed, but the disks for Tiger were sent with it. (The disk states it's the PowerBook G4 OS Version 10.4 AHT Version 2.5 and disk vers
-
Hi, I always get the following message tryingt to install an air file on my mac. The application could not be installed because the AIR file is damaged. Try obtaining a new AIR file from the application author. The same air file installs fine on xp o
-
Are free ios apps for sell if you download them with an unathorised pc
when im downloading free apps on itunes store it says buy because my computer is not authorised since i have authorised 5 computers already does this mean free apps are now for sale when i download them via my unauthorised machine. please help