Request for help on Vendor Consignment stock and Customer Consignment Stock
HI Experts,
We have a requirement to segregate the Customer Consignment stock and Vendor consignment stock from the total Consignment stock available in the BW report.
Currently in the report the calculation of total consignment stock is based up on Issued consignment stock and Received consignment stock .
The calculations of the Issued and Received consignments stocks are specified below.
Issued consignment Stock
The below following parameters are checked when the quantity is considered as Issued consignment Stock
Transaction or Process keys : 100, 101, 104, 105, 106, 110
Application : MM
Stock relevance : 1
Adding to the above conditions,
u2022 When the stock category is u2018Ku2019, the Quantity in Base Unit of Measure is assigned to Issued Consignment Stock. or
u2022 When the stock category is blank and the stock type is u2018Eu2019 or u2018Ku2019 or u2018Lu2019 then also the Quantity in Base Unit of Measure is assigned to Issued Consignment Stock.
Received Consignment Stock :
The below following parameters are checked when the quantity is considered as Issued consignment Stock
Transaction or Process keys : 000, 001, 004, 005, 006, 010
Application : MM
Stock relevance : 1
Adding to the above conditions,
u2022 When the stock category is u2018Ku2019, the Quantity in Base Unit of Measure is assigned to Received Consignment Stock. or
u2022 When the stock category is blank and the stock type is u2018Eu2019 or u2018Ku2019 or u2018Lu2019 then also the Quantity in Base Unit of Measure is assigned to Received Consignment Stock
Only stock category and stock type are available in the BW report for determining the type of consignment stock . So, with respect to stock category and stock type, could you please kindly advise if it is possible to determine the Customer consignment stock and Vendor consignment stock in the report
Thanks a lot
Warm Regards,
Jeswanth
Edited by: jeswanth kadali on Jun 23, 2009 4:10 PM
Hi,
We can settle consignment goods to vendor through MRKO transaction.Even user transafers consignment stock to own stock through MB1B transaction.We can use same document to settle vendor through MRKO transaction.
What is implications of such Action (like Goods issue, 1 step transfer) on SAP.
Nothing will happpen after after stock converted to own stock.
Regards,
JS
Similar Messages
-
A Request for help from me again! Yay!
hi guys! I was working on implementing threads for the directions of the unit. When i press forward once...nothing happens, but when i press twice it gives me this HUGE list of errors. I dont have a clue. Again, any help would be appreciated.
import javax.swing.*;
import java.awt.event.*;
import java.awt.*;
public class NBoard extends JFrame implements KeyListener{
int selection = 0;
boolean selectionmade = false;
final int WIDTH = 600;
final int HEIGHT = 600;
Image Viz =Toolkit.getDefaultToolkit().getImage(JOptionPane.showInputDialog("What character do you want?")+".gif");
int XC = 50;
int YC = 50;
Thread moving = new Move();
Unit Host = new Unit();
public NBoard(){
this.setSize(WIDTH,HEIGHT);
selection = Integer.parseInt(JOptionPane.showInputDialog("What level design do you want?"));
if(selection > 0){
selectionmade = true;
addKeyListener(this);
this.setVisible(true);
public static void main(String args[]){
new NBoard();
public void paint(Graphics g){
if(selectionmade == true){
if(selection == 1){
g.setColor(Color.white);
g.fillRect(0,0,WIDTH,HEIGHT);
g.setColor(Color.black);
g.drawLine(WIDTH/2,0,WIDTH/2,HEIGHT);
if(selection == 2){
g.setColor(Color.white);
g.fillRect(0,0,WIDTH,HEIGHT);
g.setColor(Color.black);
g.drawLine(WIDTH/2,0,WIDTH/2,HEIGHT);
for(int ctr = 1; ctr < 6; ++ctr){
g.drawRect(WIDTH/4 ,ctr * 100, 20, 20);
g.drawRect((WIDTH / 3) * 2 ,ctr * 100, 20, 20);
if(selection == 3){
g.setColor(Color.white);
g.fillRect(0,0,WIDTH,HEIGHT);
g.setColor(Color.black);
g.drawLine((WIDTH/2) - 90,0,(WIDTH/2) + 90,HEIGHT);
g.drawImage(Viz,XC,YC,this);
public void keyPressed(KeyEvent e){ //The Problem Areas
if(e.getKeyChar() == 'w'){
moving.start(); //Starting the thread to move up
else if(e.getKeyChar() == 's'){
YC = YC + 2;
else if(e.getKeyChar() == 'a'){
XC = XC - 2;
else if(e.getKeyChar() == 'd'){
XC = XC + 2;
System.out.println(e.getKeyChar());
repaint();
public void keyReleased(KeyEvent e){ //The Problem Areas
if(e.getKeyChar() == 'w'){
moving.interrupt(); //Trying to interrupt the thread once the key is released
public void keyTyped(KeyEvent e){}
class Move extends Thread{ //The Problem Areas
public void run(){ //The Thread
Unit.XC = Unit.XC - 2;
try{
Thread.sleep(1000);
catch (Exception e){}
class Unit{ //The Object which will hold all of the information about each unit
static int XC = 30;
static int YC = 30;
} By the way, here is my order of events, so you can look forward to seeing requests for help for them (hopefully not).
Threads: Moving the guy around
Threads: Making him shoot a ball at the mouses position
Network: Allow others to join/play game (This is gonna be HUGE probably), while host decides on game type.
Thanks for all the help so far!Where does moving ever get started? Why does Move extend Thread instead of implementing Runnable? (Implementing runnable is preferred and often the correct way to do it and it is in this case)
But regardless there shoud be a moving.start() somewhere or start of the Thread that has the Runnable target Move.... I don't think I see one. Unless I missed it.
so...itll work if i change the setup to Runnable? -
Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop? It pops up every single day.
Erica,
I can, with 99.99% certainty, tell you that you are absolutely right in not wanting to download or install this "Helper," whatever it is (but we can be equally certain it would not "help" anything).
I cannot comment as to Oglethorpe's recommendation of 'adwaremedic'; I am unfamiliar with it. His links to the Apple discussion and support pages warrant your time and attention.
It might be really simple -- Trying looking in your Downloads folder, trash anything that you don't know with certainty is something you want to keep, and then Secure Empty your Trash. Then remove the AdBlock extension, LastPass, and Web of Trust extensions to Safari and re-boot. If the issue goes away, still be extraordinarily careful in the future.
Unfortunately, it's probably not going to be that simple to get rid of, in which case I'd then try the line by line editing in HT203987.
I have no further suggestions (other than a complete wipe and re-install...but that's a pain because trying to restore from Time Machine would simply ... restore the Mal).
For the rest of us, please post when you find a solution.
Best.
BPW
(Also, try to edit your second post -- black out your last name on the screenshot and re-post it for others) -
How can I get iTunes to answer my requests for help?
I have tried for a few days now to get iTunes to help me get some tunes that partially downloaded. Their initial response seemed to work but the next day the tunes were only partially on my PC. I re-installed the software, called the phone number on my PayPal receipt, sent another e-mail request for help, responded to their follow up e-mail a few days ago asking if my issue was resolved.........and STILL cannot get them to help me resolve. They say I should receive a response within 24 hours, and it has been longer. No phone number to call, the initial instructions to re-download the missing tunes were confusing
It is quite easy to find out how to redownload purchases, using the search bar ( by Support) at the top of this page:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
You can contact itunes support again by clicking Support at the top of the page, then clicking the link under Contact Us. -
Transport request for Help LaunchPad : K900033.N73
Dear friends,
Can anyone please tell me where to find transport request for Help LaunchPad K900033.N73 ?
(We had raised a OSS 161317/2014 and this has been recommended by Shu Liu )
We have SAP System with SAP_BASIS 740.
I tried to work with SAP Note1799002 - How to choose Help LaunchPad files from uPerform Installation PackageI .. but did not managed to find this.
best regards
ashishHi Anish,
Sorry for delay.
I see that Ancile have answered your question. Hopefully this is to your satisfaction.
Regards,
Matthew -
Approximately 6% of all requests for help on this forum are ever "solved."
Approximately 6% of all requests for help on this forum are ever "solved." And approximately 34% of all requests for help on this forum are never responded to. Even with all the caveats, these numbers are embarrassing. Good luck everyone!
More facts and stats from the horse's mouth - http://www.mozilla.org/foundation/annualreport/2009/sustainability.html
"Total assets as of December 31, 2009 were $143 million compared with $116 million at the end of 2008, an increase of 23 percent. Unrestricted net assets at the end of 2009 were $120 million compared with $94 million in 2008, a 28 percent increase."
"Mozilla consolidated expenses for 2009 were $61 million, up approximately 26 percent from 2008 expenses of $49 million. Mozilla operating expenses in 2009 continued to remain highly focused on people and infrastructure."
"At the end of 2009, Mozilla was funding approximately 250 people working around the world."
Yes, Mozilla is indeed doing very well but they're a bit worried about the IRS audit that is currently going on.
Now, if we take the figure from the 2008 cnet article that 80% of expenses are spent on Mozilla employees as a relatively stable benchmark for 2009, we see that employee salaries averaged out to around $200,000 dollars annually for each employee, which obviously isn't what each employee is actually getting paid, but what it does mean is that given typical corporate scaling of salaries, some folks in this non-profit are making lots and lots of money.
The individuals who should be the most upset about Mozilla's unwillingness to invest even a fraction of its profits into building a real and responsive user support system are the collective-community-driven-volunteers who commit their free time so Mozilla can continue to cash in big time at their expense. A brilliant model!
Again, Firefox users appreciate the work that you and the other unpaid/unacknowledged volunteers do here.... Mozilla appreciates it more. -
Safety stock and min safety stock
Dear all,
CAn anybody explain me the functional difference between safety stock and min safety stock?
And what is the meanng of safety time?
KarthickHi,
Safety Stock:
The quantity of stock to satisfy high requirements. The purpose of the safety stock is to prevent material shortage.
Safety stock as the name suggest is the stock level till which the dead stock or stock out situation will not arise (probable figure based on past data maintained in master).
As such this figure is not stock, it is cut-off figure maintained in master which is used for Planning and once the stock level dips below this value, you can configure system to generate PR, orders automatically. It has its relevance in MRP and CBP.
Safety stock is not used in production.
Minimum Safety Stock
The quantity that defines the lower limit for safety stock. This value cannot be exceeded.
The safety is checked to see if it is greater or equal to this lower limit.
The lower limit is checked if you use an availability indicator which shows, according to customizing settings, if the safety stock is to be calculated again in a forecast. If the safety stock is lower than this level in forecasting, the safety stock is automatically increased to the value of the lower level.
The safety stock must always be greater or equal to this lower level (minimum safety stock)
Hope this will help help you.
Regards,
Pavan -
Report on Dead stock and Slow moving stock
Hi ,
On of my cleints requirement is to see the list of Dead stock and slow moving stock
I tried T.COde Mc50 and MC46 but I could not understand the report fully
In case of T.code MC50(dead stock) the input criteria for the report is just Plant,Pur org and Sales Org.
How does system identify an item as dead stock.
Is there any setting to define an item as dead stock before running report MC50?
In case of slow moving stock ,i want to see all the material for which no posting
happened for 60 days.In this case what value I need to select in T.Code MC46
Thx in advance
DevaHi,
While using MC46 report under Scope of ranking list, select the No. of days up to last consumption as 60 days.
And execute with the other selection parameters.
Regards,
DilliB -
Negitive stock and Non valuated stock
Dear Gurus
please give me over view of my below stock. provide with example and situation.
Negitive stock and Non valuated stock
Best regards
srinivas.Hi
For Negative stock
http://www.sap-basis-abap.com/mm/how-to-use-negative-stocks-and-its-purpose.htm
For Non Valuated Stock
UNBW (non-valuated materials)
Non-valuated materials are managed on a quantity basis, but not by value.
Check it out
Regards,
Raman -
Blocked stock and GR Block stock
Can anyone please let me know the difference between Blocked stock and GR blocked stock. How to post stock to these both stock type and how valuation matters to those.
Also for transfer posting from Stock type Blocked Stock to Quality Inspection Stock or Unrestricted-use Stock, whether accounting document will generate or not....
Please clarify me on this.
Thank you
ShreekCan anyone please let me know the difference between Blocked stock and GR blocked stock. How to post stock to these both stock type and how valuation matters to those.
GR Blocked stocks means if you have doubt about the stock you can post these stocks to GR Blocked stock with mvt type 103.In this case no accounting documents generated.Once you gets clarified the doubt about stock you can move the stock to your stock with mvt 105.Once you post the document with 105 you can get accounting documents will be generated.
Also for transfer posting from Stock type Blocked Stock to Quality Inspection Stock or Unrestricted-use Stock, whether accounting document will generate or not...
Blocked stock is you are blocked these stocks for other movements This stock you can transfer mvt 343 & 344 blocked to unrestricted or unrestricted to block.In this cas you are moving the stocks with in storage location in single plant so thesre is no accounting generated.only stock status changed..
Hope this will clarifies,
JS -
cannot connect to itunes store
wifi works and confirmed by accessing google & ew.com
tried reset and removed everything from ipod
still receive error cannot connect to itunes store
did google search and could not find a solution. found other's also asking for help
sent request to apple and received response with list of articles. already tried these and still don't have answer. inluded ipod model and serial number (ma62ll / 9c740wffw4n) thinking this might help them provide a specific solution.
version: 1.1.5 (4b1)
help, i want to connect to itunes,Try:
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight -
Reservations/Confirmations/vendor and customer consignment.
Hello,
What are the following:
Reservations
Confirmations
Customer Consignment and
Vendor Consignment
Also, how are they created with respect to an AFS material? (transactions used etc.)
Thanks a lot for the help.
Warm Regards,
Deepthi.Hi Deepthi,
Reservations : The material reserved against a Production Order / Cost Center is called reservation.
Confirmations :
Confirmation in PP Module means : Confirmation of Yeils / scarp agaisnt a operation of the production Order.
Confirmation in MM means : Confirmation from Vendor to supply the goods as per the P..0
Customer Consignment : Customer Material avaible with us. Generally this is used for Trading.
Vendor Consignment : Vendor Material available with us. Once the goods issue takes place the liability will be ours and settle the invoice as per the information avl with us (Vendor will not send any invoice) .
Regards
radhak mk -
Request for help in tuning the server which is running opmn process.
Hi Folks,
I request for an help in tuning the server which is running oracle app server opmn process , It is chewing arround 40% of the CPU resource,and our sysadmin is back of me to resolve this issues.
any feedback on this is highly appriciated...
Thanks in advanceRe: How to Achieve Performance Tuning
I hope you may find answers here..
Sharma -
[Request For Help] How To Send Email Midlet Using Secure Socket ?
Hello, this is the first time i ask for help to forum.sun.com.
i try to make secure connection for send email from MIDlet. Maybe you can check to my code :
EmailMidlet.java
import javax.microedition.midlet.MIDlet;
import javax.microedition.midlet.MIDletStateChangeException;
import javax.microedition.lcdui.;
public class EmailMidlet extends MIDlet implements CommandListener{
Display display = null;
// email form fields
TextField toField = null;
TextField subjectField = null;
TextField msgField = null;
Form form;
static final Command sendCommand = new Command("send", Command.OK, 2);
static final Command clearCommand = new Command("clear", Command.STOP, 3);
String to;
String subject;
String msg;
public EmailMidlet() {
display = Display.getDisplay(this);
form = new Form("Compose Message");
toField = new TextField("To:", "", 50, TextField.EMAILADDR);
subjectField = new TextField("Subject:", "", 15, TextField.ANY);
msgField = new TextField("MsgBody:", "", 90, TextField.ANY);
public void startApp() throws MIDletStateChangeException {
form.append(toField);
form.append(subjectField);
form.append(msgField);
form.addCommand(clearCommand);
form.addCommand(sendCommand);
form.setCommandListener(this);
display.setCurrent(form);
public void pauseApp() {
public void destroyApp(boolean unconditional) {
notifyDestroyed();
public void commandAction(Command c, Displayable d) {
String label = c.getLabel();
if(label.equals("clear")) {
destroyApp(true);
} else if (label.equals("send")) {
to = toField.getString();
subject = subjectField.getString();
msg = msgField.getString();
EmailClient client = new EmailClient(this,"[email protected]", to, subject, msg);
client.start();
}and EmailClient.java
import javax.microedition.io.;
import javax.microedition.lcdui.;
import java.io.;
import java.util.Date;
public class EmailClient implements Runnable {
private EmailMidlet parent;
private Display display;
private Form f;
private StringItem si;
private SecureConnection sc; //SSL
private InputStream is;
private OutputStream os;
private String smtpServerAddress = "smtp.gmail.com"; //SSL
String from;
String to;
String subject;
String msg;
public EmailClient(EmailMidlet m, String from, String to, String subject, String msg) {
parent = m;
this.from = from;
this.to = to;
this.subject = subject;
this.msg = msg;
display = Display.getDisplay(parent);
f = new Form("Email Client");
si = new StringItem("Response:" , " ");
f.append(si);
display.setCurrent(f);
public void start() {
Thread t = new Thread(this);
t.start();
public void run() {
try {
//SSL
sc = (SecureConnection)
Connector.open("ssl://"smtpServerAddress":465"); //smtp with SSL port 465
sc.setSocketOption(SocketConnection.LINGER, 5);
is = sc.openInputStream();
os = sc.openOutputStream();
os.write(("HELO there" "\r\n").getBytes());
os.write(("EHLO" "\r\n").getBytes());
os.write(("auth login" "\r\n").getBytes());
os.write(("dHVnYXNha2hpci50cmlhZGl0eWFAZ21haWwuY29t" "\r\n").getBytes());
os.write(("dGEuZW1haWxjbGllbnQ=" "\r\n").getBytes());
os.write(("MAIL FROM:<">\r\n").getBytes());
os.write(("RCPT TO:<">\r\n").getBytes());
os.write("DATA\r\n".getBytes());
// stamp the msg with date
os.write(("Date: " new Date() "\r\n").getBytes());
os.write(("From: "+from"\r\n").getBytes());
os.write(("To: "to"\r\n").getBytes());
os.write(("Subject: "subject"\r\n").getBytes());
os.write((msg+"\r\n").getBytes()); // message body
os.write(".\r\n".getBytes());
os.write("QUIT\r\n".getBytes());
StringBuffer sb = new StringBuffer();
int ch = 0;
while((ch = is.read()) != -1) {
sb.append((char) ch);
si.setText("SMTP server response - " + sb.toString());
} catch(IOException e) {
e.printStackTrace();
Alert a = new Alert
("TimeClient", "Cannot connect to SMTP server. Ping the server to make sure it is running...", null, AlertType.ERROR);
a.setTimeout(Alert.FOREVER);
display.setCurrent(a);
} finally {
try {
if(is != null) {
is.close();
if(os != null) {
os.close();
if(sc != null) {
sc.close();
} catch(IOException e) {
e.printStackTrace();
public void commandAction(Command c, Displayable s) {
if (c == Alert.DISMISS_COMMAND) {
parent.notifyDestroyed();
parent.destroyApp(true);
} When I try to debug project from netbeans, i found this error :
Starting emulator in debug server mode on port 2668
Connecting to 127.0.0.1 on port 2800
nbdebug:
Waiting for debugger on port 2668
Waiting for KVM...
Running with storage root temp.SonyEricsson_JP8_128x160_Emu10
KdpDebugTask connecting to debugger 1 ..
Running with locale: Indonesian_Indonesia.1252
Connected to KVM
Connection received.
Attached JPDA debugger to localhost:2668
java.io.IOException: error 10054 during TCP read +
at com.sun.midp.io.j2me.socket.Protocol.nonBufferedRead(Protocol.java:299)+
at com.sun.midp.io.BufferedConnectionAdapter.readBytes(BufferedConnectionAdapter.java:99)+
at com.sun.midp.io.BaseInputStream.read(ConnectionBaseAdapter.java:582)+
at com.sun.midp.ssl.Record.rdRec(+41)+
at com.sun.midp.ssl.Record.rdRec(+5)+
at com.sun.midp.ssl.In.refill(+18)+
at com.sun.midp.ssl.In.read(+29)+
at EmailClient.run(EmailClient.java:74)+
Execution completed.
5145824 bytecodes executed
9258 thread switches
1762 classes in the system (including system classes)
0 dynamic objects allocated (0 bytes)
0 garbage collections (0 bytes collected)
debug:
BUILD SUCCESSFUL (total time: 4 minutes 34 seconds)
Regard
LittlebroDon't multipost and don't use the browser's back button to edit your posts as that creates multiple postings. I've removed the other thread you started with the same questio.
Also, don't post to long dead threads. I've blocked your post and locked the thread you resurrected.
db -
Safari crashes on launch -- but Request for Help fails to post...
For a week, I've tried to post a message,to the "Safari for Mac" forum. But it fails to post.
Instead, I get a message, advising "We'll be right back".
Other people have been posting messages during this week -- so what's wrong with mine?
My message is a request for a solution to my problem of Safari crashing immediately on launch.
The message includes a Safari Crash Report, which is quite detailed (as a textEdit file, compressed Archive, it runs to 29KB).
Hoping that this brief plea gets through. TIA.The problems are caused by third party input managers/enhancers that have not yet been updated by their developers to comply with the standards used by Safari 4.1.and/or Safari 5.
In your case these are:
007af000 /Library/InputManagers/SIMBL/SIMBL.bundle/Contents/MacOS/SIMBL 007f4000 /Library/InputManagers/Ecamm/Ecamm Plugin Loader.bundle/Contents/MacOS/Ecamm Plugin Loader
00e0a000 /Library/InputManagers/Ecamm/Plugins/iGlasses.plugin/Contents/MacOS/iGlasses 00e45000 /Users/john/Library/Application Support/SIMBL/Plugins/VideoboxSafariPlugin.bundle/Contents/MacOS/VideoboxSafari Plugin
02cd6000 /Users/john/Library/Internet Plug-Ins/iGetterBundle.plugin/Contents/MacOS/iGetterBundle 02e02000 /Users/john/Library/Internet Plug-Ins/iGetterBundle.plugin/Contents/Resources/iGetterSafariBundle.bundle/Con tents/MacOS/iGetterSafariBundle
You fill find them in one or either of these folders:
Home/Library/Input Managers
Hard Disk/library/Input Managers
Hard Disk/Library/Application Support
although the exact location is indicated in your crash report as quoted above - look under 'Binary Images'.
Close Safari and delete them, then restart Safari and it should be working normally. Alternatively drag them to the desktop and restart Safari. then add them back one at a time, restarting Safari every time, until you find the one (or more) causing the crash.
Check with the developers of the plug-in/s in question for updates that are Safari 5 compliant.
Maybe you are looking for
-
UWC/CE 6.3 and Access Manager 7.1 SSO sometimes fails (seems like a bug)
PREAMBULA: I started writing this post thinking that our AM SSO setup was at fault in some step. As I was gathering data, checking the doc-links and config files and finally sniffed the servers for HTTP dialogs, I grew pretty sure there's a bug in UW
-
Device Manager in Win: Does Microsoft Virtual WiFi MiniPort Adapter Matter?
I'm a novice user just wondering about configuring devices in Windows 7 bootcamp partition. My Apple iMac computer shows as a device in the Windows device manager with a yellow exclamation mark. The driver is Microsoft Virtual WiFi Miniport Adapter.
-
External drive unmountable & invisible after sleep (osx 10.8.1)
Hello, yesterday evening, the lid of my mbp (retina, medio 2012) was closed while it was displaying the screensaver, with an external USB disk plugged in. After I opened the lid and logged back in, I saw a dialog mentioning that the disk was removed
-
Installing Oracle 9i (version 9.0.1) on RedHat Linux 7.2
Hi All, I've been trying to install Oracle 9i version 9.0.1 on RedHat Linux 7.2 with kernel 2.4.7-10. This RH 7.2 is running on my Compaq Armada M700 laptop that has 800MHz CPU and 256MB of RAM. I have 10GB of diskspace on this laptop. Someone in thi
-
Why are some of my pen lines jagged in my color illustration?
Hi everyone, I'm having an issue with an illustration that I am working on. It's something that I am doing for myself so it's not anything life altering but it's very annoying. I scanned an ink drawing in illustrator CS3 on a Macbook at a high resolu