Request having function group released but function module attribute shows not released

Hi experts,
               I am a beginner.
              There is a transport request in which my function group and other objects were present . This transport request and its task were released . But if i check the attributes section of the function module that is present in that function group , it shows not released .
Is there some problem ? did the function module not get released with its group? It wasn't showing anywhere in the request even though i had added it during creation.
Here is the image :
Thanks,
Unnati

Hi,
Those two meanings of 'released' are unrelated. Don't worry about it.
Also, a function module sometimes does not explicitly appear in a transport request, if the function group is already in there.
cheers
Paul

Similar Messages

  • Tranceport request for function module

    Hi,
    first i have created function group and function module under local class, now i created request for function group, but how to create request for function module, i have to trancport my functionmodule. please do the need full help.
    thanks in advance.
    Radhakrishna

    go to se37
    1.give desired function module
    2.select change or display option
    3. Click -GOTO optin on menu bar and select 'Object Directory entry '
    4.click on object directory entry  and press f6
    5.change package and reponsible person and save it will ask you request finaly you can relese.

  • Function module WWW_ALV_CALL is not released for the Internet

    Hi
    I am facing this error Function module WWW_ALV_CALL is not released for the Internet and Only user SAP can release the function module.
    Best Regards
    GAGAN

    hi,
    This Web based calls are not available anymore in Netweaver 2004s/7.0. 
    More information in SAP-Note: 910202
    Hope this helps
    regards
    Tobias

  • Function module RSD_ZIO_ALM02_TXT_GET does not exist

    Hi
    I am trying to copy the data from one info cube to another info cube with the read master data in transformation rule for some of the info object. This exercise I have done many times successfully for the same structure but suddenly I am getting this error without doing any changes
    'Function module RSD_ZIO_ALM02_TXT_GET does not exist'
    After getting this error I have delete the transfer rule for above object than the some error are coming for the another info object which also used for read master data.
    Kindly help me .(we are working on ECC 6)
    Thanks and Regards
    Vinay

    Hi Vis
    I tried this one also but it’s not working. All the info objects are active and I tried after reactivating also but still error exits.
    Thanks and regards
    Vinay

  • Function module RSD_ZBCSASSET_TXT_GET does not exist

    Hi,
    We are working with SEM-BCS 6.0 (SAP BI 7.0), and I want to trasfer master data of a infoobject from BI to SEM BCS through load from data stream task.
    When I going to execute the task the system display the next message Function module RSD_ZBCSASSET_TXT_GET does not exist.  Message no. EU802.
    Thanks in advanced
    Carlos

    Same error occured in a planning sequence of mine. The related characteristic did not have texts.
    The error occured after the addition of a navigational attribute to the MultiProvider.
    Solution: re-activate the aggregation level.
    Late, but hope that helps...

  • BAPI function module 'BAPI_PO_CHANGE' is not updating aacural condition

    Dear All,
    BAPI function module 'BAPI_PO_CHANGE' is not updating aacural condition in PO pricing. Please give me a right solution on this query.
    Below I have given my code.
    Thanks and Regards
    Makarabd
    poitem-po_item = '00010'.
    poitem-net_price = '1060.00'.
    poitem-period_ind_expiration_date = 'D'.
    APPEND poitem.
    poitemx-po_item = '00010'.
    poitemx-po_itemx = 'X'.
    poitemx-net_price = 'X'.
    APPEND poitemx.
    select single * from ekko where ebeln = po_no.
    pocond-itm_number = '00010'.
    pocond-cond_type = 'ZVCU'.
    pocond-cond_value = 10.
    pocond-currency = '%'.
    pocond-STAT_CON = 'X'.
    pocond-accruals = 'X'.
    pocond-change_id = 'I'.   " I - Add , U - Update , D - Delete
    APPEND pocond.
    pocondx-itm_number = '00010'.
    pocondx-itm_numberx = 'X'.
    pocondx-cond_type = 'X'.
    pocondx-cond_value = 'X'.
    pocondx-currency = 'X'.
    pocondx-change_id = 'X'.
    pocondx-STAT_CON = 'X'.
    pocondx-accruals = 'X'.
    APPEND pocondx.
       CALL FUNCTION 'BAPI_PO_CHANGE'
            EXPORTING
              purchaseorder          = po_no
            TABLES
              return                 = return
              poitem                 = poitem
              poitemx                = poitemx
              pocond                 = pocond
              pocondx                = pocondx.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
    WAIT = 'X'.

    Hi ,
    Are you trying to pass the non char fields in CI_COBL. Please look at the link below .
    [http://forums.sdn.sap.com/thread.jspa?threadID=1137795] .
    Also serach for the similar threads when and notes while transferring currency and quantity field in different custom includes of the EKPO ...
    Thanks,
    Anjaneya .

  • Function Module " /Crystal/GET_FUNCAREA_CATALOG" not found

    Good day Masters
    I am not able to connect to our SAP ECC6.0 because of the below error
    Function Module " /Crystal/GET_FUNCAREA_CATALOG" not found
    is this function modules exists on the transport files ? do you think by executing the transport this problem will be resolved ?
    and how we can execute the transport files from Basis perspective ,,, our basis tried to execute this transport to they got belw error
    " file might be currapted "
    Regards

    Hi
    your BASIS administrator should copy the transport files in the import queue and use the STMS transaction to import them in your system. Make sure to import the UNICODE version in the order as shown in the transports_<your language>.txt file.
    Make sure that the files are indeed imported.
    Which version of BOBJ are you using?
    Regards,
    Stratos

  • Preview error function module "CRYSTAL/MDX_GET_STREAM_INFO" not found

    Hi,
    I cannot preview the report I created in Crystal Report 2008. Here is 1st error message "Failed to retrieve data from the database. Then the 2nd error message is "Database connector error: : Function module 'CRYSTAL/MDX_GET_STREAM_INFO' not found. My data source is from MDX query.
    Thanks in advance.
    Rose

    Hi
    Contact your basis administrator to ensure
    - All the transports have been installed properly.
    - Check the version of Crystal Reports and BusinessObjects and the SAP MDX driver version.
    For CRXIR2 +BOXIR2 this issue was resolved in CHF15.
    Regards
    Sourashree

  • Calling a remote enabled function module which does not exist in caller sys

    Hi,
    I have a a system ABC from which I am trying call a rfc enabled fm(Test) present in system XYZ.
    The fm(Test) does not exist in the system ABC so I am getting generation errors and dumps.
    Is there a way for me to call these remote enabled function modules which does not exist in the caller system without the obvious errors etc.
    Is there any special way.
    Thanks

    Hi,
    please check this sample:
    REPORT  zcallfm                                 .
    DATA: xv_return TYPE sysubrc.
    CALL FUNCTION 'DOESNOTEXIST'
    DESTINATION   'NOWHERE'
    EXPORTING     caller                = sy-sysid
    IMPORTING     return                = xv_return
    EXCEPTIONS    system_failure        = 1
                  communication_failure = 2
                  OTHERS                = 4.
    It shouldn't throw any generation errors in your system!
    Regards,
    Klaus

  • Post-upgrade ToDo, PI configuration Wizard: com.sap.security.api.DuplicateKeyException Group found, but unique name "SAP_SLD_DATA_SUPPLIER" is not unique!

    after PI-Upgrade to NW-PI-731-SP07,  executing the PI-configuration wizard:
    step 126 of 162
    Assign SLD Data Supplier user to Group SAP_SLD_DATA_SUPPLIER (local SLD)
    Error:
    Group found, but unique name "SAP_SLD_DATA_SUPPLIER" is not unique!
    Execute Java Service
    Library: sap.com/tc~lm~ctc~util~core_ear
    Class: com.sap.ctc.util.core.services.UserFacade
    Method: void com.sap.ctc.util.core.services.UserFacade.addUserToGroup(java.lang.String, java.lang.String)
    Arguments (2)
    userName : SLD_DS_EXE
    groupName : SAP_SLD_DATA_SUPPLIER
    InvokeService- Result: ERROR
    Refresh Env. Messages: false
    Duration: 1.936 sec
    Library Info
    Default Trace
    Exception Class: com.sap.security.api.DuplicateKeyException
    Exception Message: Group found, but unique name "SAP_SLD_DATA_SUPPLIER" is not unique!
    com.sap.security.api.DuplicateKeyException: Group found, but unique name "SAP_SLD_DATA_SUPPLIER" is not unique!
    at com.sap.ctc.util.infra.rfc.BaseConfig.dispatchException(BaseConfig.java:230)
    at com.sap.ctc.util.core.services.impl.ume.java.GroupJavaImpl.verify(GroupJavaImpl.java:121)
    at com.sap.ctc.util.core.services.impl.ume.DualGroupImpl.verify(DualGroupImpl.java:118)
    at com.sap.ctc.util.core.services.content.ume.UserService.addToGroup(UserService.java:725)
    at com.sap.ctc.util.core.services.UserFacade.addUserToGroup(UserFacade.java:288)
    what to do?
    ============
    o.k.
    https://service.sap.com/sap/support/notes/1016283
    first run the UME consistency check => found some inconsistency => did repair UME
    then run again UME consistency check => found no more inconsistency !!
    the again - try to run the PI-Upgrade-Wizard => but again error on executing .....

    see this sap-notes:
    http://service.sap.com/sap/support/notes/1617234
    http://service.sap.com/sap/support/notes/1661135
    http://service.sap.com/sap/support/notes/1678815
    http://service.sap.com/sap/support/notes/1626747

  • Ipad keeps requesting outlook password, trying cancel but still in cycle - can not do anything else.  NOTE - recently change email password on PC

    ipad keeps requesting outlook password, trying cancel but still in cycle - can not do anything else.  NOTE - recently change email password on PC

    Try a reboot:
    To reboot your iPad, hold down the sleep/wake button and the home button simultaneously until the screen goes black and the Apple logo appears. If, during this process, a slider appears on the screen to power it off, ignore it and keep holding the buttons down.
    Rebooting your iPad can solve a lot of problems. Once you do that, go into Settings > Mail, Contacts, Calendars and make sure the correct, new password is entered in that account.

  • I live in india and i m having an iphone 4s but in that siri does not make phone calls nor facetime and my phone is brought from us and it is unlocked any way to turn it on??????

    I live in india and i m having an iphone 4s but in that siri does not make phone calls nor facetime and my phone is brought from us and it is unlocked any way to turn it on??????

    Ujjval.1996 wrote:
    but siri dows not makes it up.......
    Sorry, I don't understand what you are saying.

  • Hi ,my charger is plug in and shows the light but in the bar shows (not charging )

    hi ,my charger is plug in and shows the light but in the bar shows (not charging )

    What color is the LED?

  • Transport Request for Function Module

    Hi Gurus,
    I have created custom function module, which has function group, fields, and include. While developing only Function group is collected . But couldn't know how to collect function module and other dependent objects.
    Please assiss me how to collect function module and other dependent objects.
    Thanks
    Ganesh Reddy.

    Hi Ganesh,
    goto SE37, give the functional module and diplay the code
    in the environment on menu bar, you will find option transport request
    Regards,
    Venkatesh

  • "IS REQUESTED" IN FUNCTION MODULE

    Hello frnds,
    I have to copy a function module into subroutine, but in that function module there is a command "IS REQUESTED" which won't work in subroutine. can you help me by giving some solution by providing some command which we can use instead of "is requested"
    Thanks in advance
    Navneet
    [email protected]

    hi,
    IS REQUESTED check can be done on formal parameters of an FM whether this parameter was used when ur function module is called from a program.
    I assume that the field on which IS REQUESTED was used is an optional parameter in your function module.
    Let that statement be in the function module but use a flag.
    if <field> is requested.
    l_flag eq 'X'.
    endif.
    Now inside ur subroutine you can use flag.
    if l_flag eq 'X'.
    <the logic of the original code>.
    endif.

Maybe you are looking for