Request REQU no longer exists in DSO, system is inconsistent
Dear All,
I was getting an error while activating ODS 'Request is already (partially) activated; no further QM action possible'.
I searched the threads and found one solution: To delete the request in RSICCONT (delete activated requests OR
Make the selective deletion of the contents of that request).
I implemented the same but now activation fails with an error"Request REQU_4GQUIQJL4OPNEI5NH6HZMJ5HF no longer exists in DSO ZRMS_O01; system is inconsistent".
Please help.
Regards,
Amit Srivastava
Dear Des,
I have pasted the entries for the concerned request as in table RSODSACTREQ. I have only pasted fields which had any values in them.
Infocube Request data packet operation timestamp
ZRMS_O01 REQU_4GQUIQJL4OPNEI5NH6HZMJ5HF U 0
ZRMS_O01 REQU_4GQUIQJL4OPNEI5NH6HZMJ5HF 1 U 20,100,205,121,450
ZRMS_O01 REQU_4GQUIQJL4OPNEI5NH6HZMJ5HF 2 U 20,100,205,121,455
Please advise.
Regards,
Amit Srivastava
Similar Messages
-
I-Tunes attempts to install on a drive that no longer exists.
When I attempt to upgrade I-Tunes, I receive an error msg that states the drive specified is invalid. (this drive no longer exists on my system) There is no msg code number.
Any suggestions, anybody?
Thanks.With one of those, there may still be registry entries on the PC pointing at the old (now non-existent) drive. The following InstallShield troubleshooting document is worth a shot:
Error 1327 Invalid Drive -
FM CRM_IC_XML_XSTRING2STRING no longer exist
Hi All
I am using the function module CRM_IC_XML_XSTRING2STRING to convert an xstring to a string. I haven't used this code in a while, but when I now try to execute, the function module does no longer exist in the system. There has been an upgrade of the system, could it be that the function module has been removed??
Anyone know of a "substitute" for this FM that I can use to convert XSTRING to STRING?
Thanks!
regards OleHi
Thanks for your suggestion. I solved this by using the methods within this function module (all related to SAP BASIS) in a local developed function module that now works.
regards Ole -
Error while activating the ODS "Request No longer Exist in ODS".
Hi All,
I had deleted one request from four ODS's before completely loaded from R/3. Now when i am trying to activate from one of them using process chain it is giving me the error massage "Request No longer Exist in ODS".
But when i am manually activating this it is not giving me any error.
Please suggest solution for the same.
Regards,
Rohan ShahI had deleted one request from four ODS's before completely loaded from R/3.
Before deleting the request make QM status red and then delete.
when i am trying to activate from one of them using process chain it is giving me the error massage "Request No longer Exist in ODS".
Already you have deleted the request. How can you activate the same request?
Have you loaded the data again?
With Regards,
Kishore.
Edited by: Siv Kishore on Apr 22, 2009 3:58 PM -
My old Apple ID is on my iPhone, but this has been transferred to a new Apple ID. The iCloud on my phone is requesting the password for the old Apple ID, but this no longer exists. How do I update the iCloud Apple ID on my iPhone? When I try to get the old passwork through forgot my password, the reply is that there is no account that exists.
Try the following....
Go to Settings>icloud, scroll to bottom of screen and tap Delete Account. Then log in using a different ID. -
Hi,
I have created on windows service to fetch sharepoint list ad update the list items.
when i run this service in sharepoint server(where the sharepoint site is hosted),it is working fine. If i run the same service in another machine(sharepoint installed in this machine also). it is giving the below error
The Web application at [URL] could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application.
Code snippet
SPSite sharepointSite = null;
SPWeb rootWeb = null;
try
//SPList current = null, previous = null;
string colmId = ConfigurationManager.AppSettings[ID_COLM];
List<TaskEntity> list = new List<TaskEntity>();
sharepointSite = new SPSite(URL);
rootWeb = sharepointSite.OpenWeb();
SPList current = rootWeb.Lists[ConfigurationManager.AppSettings[OMEGA_REGISTRATION_LIST]];
WriteEventLog("current" + current.Items.Count.ToString());
catch (Exception ex)
ExceptionMethod(ex);
finally
sharepointSite = null;
rootWeb = null;
I have pointed .net framework to 3.5 version and target palform as Any CPU. Please suggest meHi mallela1,
I also had similar issue couple of months back when I was trying to access a remote URL from a Windows service when the site does not exists in the server where service resides.
You cannot access a remote url (even though it is SharePoint server and also in same network ) from server object model.
SPSite can look in the current server only. here what is happening is SPSite will look for this in the current server DB and it is not finding this errror.
So please dont use ServerObject model for accessing remote sites. You can use Client Object model for the code /requirement you have stated above.
I wasted lot of time in finding a work around to make to work. It did not. So look for other options.
Regards,
Nandini -
I changed my email associated with my BB ID on my desktop, after upgrading to OS6 on my Curve 9930:
NOW............
Playbook & Curve - "App World is having difficulty connecting to App World Server. Verify Network Connections."
Deskptop (Blackberry ID) - Only Allows me to see "Logout" and see "Account Details"
Should i change my email back to what it was?
Should I wait 24 hours and try again?
Is there someone I can call to review the issue?
This is the messsage I see when i try to log in to (App World) on Desktop:
Page Not Found
The page you have requested has been moved or no longer exists. (EC )
To return to the home page please click herePlease try optimizing your browser (clear cache, cookies, internet history, download history, etc.)
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter -
In MD05 system show message "The MRP element no longer exist".
Hi Guru,
Need some help .
In MD04 transaction contain Purchase order, when I double click purchase order,It will get open . But when I open same purchase order in MD05 system show message u201CThe MRP element no longer exist".
Please help me , if any know the solution or any input. Open purchase order in system.
Regards
PNUPNU,
I don't believe this is the same Purchase order.
Review closely order number/item number/schedule number. I believe you will see that the old entry (MD05) no longer exists, and has been replaced with a similar item.
Best Regards,
DB49 -
I am trying to connect to SharePoint in my Office 365 environment by following https://support.office.com/article/Set-up-the-SharePoint-Online-Management-Shell-environment-7b931221-63e2-45cc-9ebc-30e042f17e2c and I am getting:
Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.
Is there some setting I need to change on the O365 side? Thanks.Hi,
Based on your description, my understanding is that you want connect SharePoint Online using PowerShell.
Please make sure that the following software is installed.
Windows Management Framework 3.0
SharePoint Online Management Shell
And then, open the SharePoint Online Management Shell and use the Script below to test
whether it works.
$User = "[username]@[tenant].onmicrosoft.com"
$Pass = "[password]"
$creds = New-Object System.Management.Automation.PSCredential($User,(ConvertTo-SecureString $Pass -AsPlainText -Force));
Connect-SPOService -Url https://[tenant]-admin.sharepoint.com -Credential $creds
Get-SPOSite
More information:
http://blog.falchionconsulting.com/index.php/2013/01/using-powershell-to-manage-sharepoint-2013-online/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support -
Hi,
I am getting this error in most of our WSUS servers.
Content file download failed.
Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
Log Name: Application
Source: Windows Server Update Services
Date: 12/19/2014 4:45:55 PM
Event ID: 10032
Task Category: 7
Level: Error
Keywords: Classic
User: N/A
Computer: ******
Description:
The server is failing to download some updates.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">10032</EventID>
<Level>2</Level>
<Task>7</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
<EventRecordID>496887</EventRecordID>
<Channel>Application</Channel>
<Computer>*****</Computer>
<Data>The server is failing to download some updates.</Data>
This error is happening everyday. Please advise for a fix.Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
Source: Windows Server Update Services
Description:
The server is failing to download some updates.
This error is happening everyday. Please advise for a fix.
If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
For a downstream server, figure out what the affected updates are and fix the upstream server.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
How to delete the queries in BW Production which are no longer existing.
Hi,
How to delete the queries in BW production which are no longer existing in DEV.
1. I tried Using RSZDELETE in Production it is not getting deleted and the below message given.
Query object 4A7V83T3RB4ABIOKSDJT2HWDL is blocked. Deletion has been cancelled.
2. I tried creating another query in dev with the same technical name and send a transport with deletion
it is not working.
Please advise me on this for any function module or any other method.
Thanks
SuryaHi,
If you transported the query from DEV and now you want to delete it, you should open a BEx request (Dev Class under which it was originally transported -- or-- Standard - type) in DEV delete the query and move the transport to Production.
As far as your error is concerned, usually when you can delete a query using the delete option in query designer itself,
Business Explorer> query-> delete objects , when you press execute the system offers you a list of dependent objects on the query(workbook,views), in case the sysytem is unable to delete them i.e.they being used as a input query for a characteristic variable (replacement path),then system throws this error.You can delete these all depndents under there prescribed roles , fav s & then proceed.
Hope this will be expedite.
Thax & regards.
Vaibhave Sharma -
I had an existing, functional datepicker in a web page.
Recently I downloaded the UI Datepicker in the Widget Browser and installed it in DW CS5. Now every time I load the file that calls the datepicker that I added myself, a warning opens with the following text:
This document contains JavaScript code for a widget that no longer exists. If you don't remove the code, the browser might display JavaScript errors when loading the page. Would you like Dreamweaver to find all instances of this code for you?
Widget: $("#reservDateBegin").datepicker();
Widget: $("#reservDateEnd").datepicker();
Clicking "Yes" opens the file and shows the search box at the bottom of the window with [current document] in File and $("#reservDateEnd").datepicker(); in Matched Text. Clicking "No" just opens the file.
The error is wrong, since installing the widget is what caused the error in the first place!
How can I get DW to stop showing this message?
Thanks for any help.I do understand you're trying to be helpful. I was just hoping providing the relevant code snippets would be sufficient so I didn't have to take the time to provide a "cleaned" version of the files and upload those to a public-safe location.
Zabeth69 wrote: If you don't understand what 'code at the bottom of the page' means, you have not used one of those systems. I don't know what causes the error code to come up (besides removing a Spry widget, I mean). So if it doesn't apply to you, ignore it.
This is exactly my point: I haven't used any of the DW "systems". I've always manually coded in DW, so I can't have removed a Spry widget in the first place. It wasn't until I installed the Widget using the Widget Browser that I started getting the error (I don't mean adding the datepicker widget to the code using the DW Insert menu - I mean installing the Widget into DW itself). Ignoring such an erroneous/incorrect error seems kind of silly, since every time I open the file I get the error message.
Anyway, as requested, the following are links to the contactUsCleaned.php page, and the php included headerCleaned.php file. Since these use php includes to complete the rendered HTML, they won't look right in the browser, but as you know viewing the source will show the relevant html, javascript, and jquery code. I didn't see any way to upload the files in this forum, which, due to the php code, would be preferable to see exactly what my code looks like...
http://www.eventidewebdesign.com/public/contactUsCleaned.php
http://www.eventidewebdesign.com/public/headerCleaned.php
The footer.php file the contactUs page includes is simply a set of HTML links to the pages on the site, copyright info, and the Google Analytics script. There is no other code in the footer.php file. -
How to change protected variants created by users that no longer exist
There are several older variants for which background jobs are scheduled for daily prcessing. These variants were created and protected by uses that no longer exist in SAP.
How to unprotect and change these variants to reflect new requirements.Hi Anam
1. Execute tcode VARCH and enter the program and variant name and make the changes, if the system allows you to do so.
2. Check with the basis/security team if they can extend the validity and reset the password for the old ids.
3. If the above doesnt work, you will need to copy the variants manually
Moving forward, when you create/change jobs, request the basis/security team to create common ids like OTCADM, P2PADM, etc. Ensure that all the variants and jobs are created/changed using this common id. Basis/Security team can controll by opening and closing the ADM account on request from project team and the usage can be recorded for tracking.
To check the jobs that use a known variant, use tables TBTCP, TBTCO.
Best Regards
Sathees Gopalan -
Problem in WAD (The requested query / does not exist on the current server)
Dear Guru's
When i execute a Web Application in WAD in the selection screen suppose if i give Key product as 86000 then check and execute i get correct data. Then if i come to backpage (Selection screen again using backspace) and change Key product as 86022 then check and execute then i get following error
The requested query / does not exist on the current server
System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
Can any one please provide me some good solution...
We are using BI 7.0 sp 16, But i am executing this Wed Application in 3.1WAD.
Thanks and Regards,
kalyanDear Jai,
Issue is in WAD selection screen for first product valuse every thing if fine, when i go back and change product value and then CHECK and EXECUTE the following error comes.
The requested query / does not exist on the current server
System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
Any one have any idea plssssssssssssssssssssssssssssssssssss..........
dude's some soln.....
Thanks and Regards,
Dev
Edited by: Srinivas dev on Jul 4, 2008 2:45 PM -
Requested protocol does not exist.
Hello,
I've compiled one the the connection demo's I've found (included below)
I'm running it through kvm instead of the phone emulator.
When running I get a:
javax.microedition.io.ConnectionNotFoundException: The requested protocol does not exist http://java.sun.com
I have tried connections with different protocols and get the same error.
Are no protocols implemented with the kvm that comes precompiled? If so, how do I get them to work?
Regards
Ken
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.io.*;
import java.io.*;
public class hello
public static void main(String args[])
HttpConnection hc = null;
InputStream is = null;
try
System.out.println("getting connection");
hc = (HttpConnection)Connector.open("http://java.sun.com");
System.out.println("opening input stream");
is = hc.openInputStream();
int ch;
Check the Content-Length first
long len = hc.getLength();
if(len!=-1)
for(int i = 0;i<len;i++)
if((ch = is.read())!= -1)
System.out.print((char) ch);
else
if the content-length is not available
while ((ch = is.read()) != -1)
System.out.print((char) ch);
is.close();
hc.close();
catch(Throwable e)
System.out.println("***PROBLEM***" + e);CLDC by default does not support HTTP. That is a requirement of MIDP. However, there may be different CLDC runtimes available from where you got that one which may expose HTTP (but not the HttpConneciton class). When you're looking for the smallest example runtime, you just ship what's required. In the case of CLDC where various vendors are competing on size, you don't add anything optional. However, you usually have another drop available with some 'useful' features. One of them being http.
Maybe you are looking for
-
Add Text Justification Options
For text fields added to slides, the ability to control justification (e.g., Left, Center, Right), would be very helpful.
-
An intelligent way to import already existing directory structure to Aperture
Hello, is there an intelligent way to import already existing big directory structure of photographs (over 2TB) archive into Aperture? I have my catalogue on a disk created in a way: date - short shot description (i.e. "2011-02-14 Name Surname (portr
-
Asset Posting-Cost Centre input field
I am trying to post an asset acquisition using FB01. While posting the amount to the asset, system does not show the cost centre as greyed out eventhough the FSGs for GL and posting key are suitably modified with 'cost centre' as 'optional'. How th
-
IOS 8 creating multiple group messages with same recipients
After updating to iOS 8.0, my iPhone 5s has started creating multiple group messages with the same recipients. For example, my phone has created three group threads with the exact same people in it. Different friends' messages go to different threads
-
Hi, Is there any transaction or report to check and update inconsistent user status in sales orders. For example, if a sales order has third party item (PTO, TAS) and do to some reasons purchase requisition is not generated but the status of the sale