Request still running no idocs are arrived into BI

Hi Experts,
I'm working on EHP1[BI 7.01] and trying to load the data from R/3 system with generic data source. The records are updated in PSA[data source] and which is showing "12:25:21 ( 15 From 0 Records ) " and with yellow status with the below information.
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
No Idocs arrived from the source system.
I checked different threads relating to this issue with different solutions like checking WE20, BD87, tRFC etc., but still i'm unable to resolve this.
This is very urgent issue could anyone please help me in resolving this issue..
Thanks & Regards,
Amarnath

I mean.. Once u press Source system.. it will ask u for the ID and PWD.. once u give that.. it will ask for the data range .. by default it will be todays date as ur has started today only.... and then execute...
it will take u to SM58 screen.. there u just see the status of the different IDOC entries... if u can see the Executed as status then u can press F6 to push it to BW..
If u see the status as Executing then u need to wait as the operation is still running....
.. In practive if u feel that this load is taking long time compared to the actual.. then u can go ahead with the the repeat of the load by killing the present load in the source system.. and removing the bad req from the ur target..
thanks
Hope this helps.

Similar Messages

  • Request still running

    Hi Expert,
    I did extract data for SAP HR Recruitment from source system (SAP R/3) to Cube in BW 7.0, when I ran the InfoPackage, the message always with status "Request still running" (detail message --> missing message: Number of send message) until few hours, no data extracted to PSA.
    But the problem only in 0APPLICANT (text and attributes) datasource, no problem found in the others Recruitment datasources.
    I've to DataSource replication, delete/re-create infopackage, re-arrange transformation. And I've check source system using RSA3 and Applicant data available in the source system.
    I've check using SM50, the process always running but never finish (status always Yellow).
    Is there any solution for this problem ?
    Regards,
    Tri Wicaksono

    Hi....
    Have you checked the extraction job in the Source System ...........copy the request number ......go to the source system...........SM37......put *REQXXXXXXX........check whether the Job got completed or not.....
    Also , In the IP Monitor screen....in the Menu Bar ---> Settings --> Evaluation of requests (Traffic Lights) --> For the option " If no data is available in the system the request "......you should select "Status Successful".....by default it will be "Status Successful" only...until and unless someone change it manually....
    Also check for short dump and TRFC..........in both source system and data ware house.........in the Menu Bar --> Environment.......there you will get all the options....
    To check the Short Dumps.........you have search for the Request Number.....if it is there it means load went to short dump........
    If TRFCs are stucj press F6 to push it........
    After that also if it doesn't progress....it means it went to dump.....then change the stsus to red manually and repeat the load......
    Regards,
    Debjani.....

  • Conc request still running

    Hi Hussen,
    One conc request is still running, it should be in completed in couple minutes.
    When i checked it's parent request, it is in Phase:Running Status:Paused state.
    Any help?

    Hi,
    Please mention the application release along with the database version and OS.
    One conc request is still running, it should be in completed in couple minutes. Is this a standard or custom concurrent program? Has this ever worked? If yes, any changes have been done recently?
    Please verify that there are no locks in the database from the backend.
    When i checked it's parent request, it is in Phase:Running Status:Paused state. This is an expected behavior if the child process is still running.
    Regards,
    Hussein

  • Request still running but?

    Hi,
    My request is running , but in the data target the request is set to green why?
    give me the solution
    and am not able to see the data in the data target
    data is there in PSA
    Thanx in advance,
    Ravi.

    Hi Ravi,
    Please check with the Tcode -SM37  whether your job is complete or not.
    If Your job is not complete then you are unable to see the data .
    If your job is complete and request is still running then kindly check the log of the  you job in sm37 only from that you can come to the detail that why the status is green and the request is still running.
    Rgds,
    Hirdesh Gupta

  • Request status is in Red, where as message is "Request still running"

    Hi,
    In my production system, one data load showing red as status,while in status tab tab it is giving message that request is still running.
    Please give me your valuable suggestions, why it is showing linke that and my next steps in this case.
    Thanks in advance.
    Thanks And Regards,
    Narayana K.

    Hi,
    It might have occure because of Time out.Your Bw system is still searching for the request while the request already got loaded virtually.
    Just try to do a repeat if possible.
    Hope this helps
    Assign points if useful
    Regards,
    venkat

  • Process still running when windows are closed

    Sometimes when I try to open Firefox I get a message stating that it is still running and I cannot open until I go to the task manager and end the Firefox process which is usually using several thousand kbs of RAM. What the hell is going on?

    The above solution sounds like a bunch of BS. I never had to go to the file menu and select close firefox before I downloaded the latest version, version 5.0.1.
    You guys a Mozilla hosed the program and ruined a good, no great thing.
    FIX IT RIGHT!!!

  • CCA9 DELTA STILL RUNNING

    Hi Gurus,
    we are loading cca9 delta on daily basis. Today delta is giving problem like.
    data has came to PSA, DATA selection has been ended at R/3.
    STATUS  :request still running.
    Current status
    The processing of the data was not finished.
    in extraction tap record sent still it is in yellow.
    process data in update rules.
    we change the QM STATUS 'RED' trying to load from PSA Again it is not allowing.
    Could you please some one help me on this.
    we have to provide the data to users at any cost.
    Waiting for response.
    Thanks
    srini

    Hi Krish,
    I will appreciate your quick response.
    I have done it but still repeat also we are facing the same problem.
    Please let me know any procedure beyond this.
    I will be thankful for quick response.
    Regards

  • Req still running

    Hi
    I am currently working in BW3.5
    I have 8 datasources which are delta load from R/3
    There is a issue with one datasoucre as it is not retreiving the data from R/3
    Request still running (0 From 0 Records)
    Could you pls let me know as what could be the issue

    Hello Pavan,
    I think there is a problem in your load. I think you should cancel the load right now. And delete the red request.
    After that you can make another load. I am quite optimistic that it will take all the delta records.
    In anycase the system will prompt you whether or not your delta will be lost or not so you can act accordingly.
    Kindly please do post back if the queestion sitll hangs.
    Close the thread if you have got an answer to the question.
    Regards,
    Den.

  • PI 7.1 runtime error: 2 messages are merged into one

    Hi,
    We have recently upgraded to 71. We are having a crtical issue with one of the interface. below are the details:
    Background:Interface is using ABAP mapping to convert an Idoc into file.
    File name is fed into u2018dynamic configurationu2019 in mapping program.
    File adapter uses dynamic file name and saves the file using NFS.
    Interface receives idocs in batch, so several Idocs are received by XI almost at the same time.
    Interface has been working without any problem in version 3.00 for last 3 years.
    Problem in 71.:On occasions (random, not always), 2 idocs are merged into one file. It means, only one file is created, which includes the data from 2 idocs.
    In message pipeline, same file name is shown both message (in dynamic config after mapping)
    We have tried u2018use temporary filenameu2019 option on file adapter, but problem is not resolved.
    Any sugegstion pelase!

    Hi,
    In your Graphical mapping create an UDF with code Thread.sleep(1000)  and map this udf to any node (may be root node).
    Note: The delay is in mili sec.
    This udf will delay the mapping for specific time. I am not sure if it is going to solve your problem but you can try.
    Regards,
    Sarvesh

  • I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion - NOT Mountain Lion. Tried all available software updates - no joy. Any ideas please?

    I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion (10.7.4) - NOT Mountain Lion. Tried all available software updates - all up to date apparently but still no joy. OS X Lion shows the LX5 as a supported file format. I dont want to have to upgrade to Mountain Lion just to see if this solves the problem. Any ideas please.

    Since when did this happen? Directly after you upgraded to Aperture 3.3.2?
    If it happened directly after the upgrade the problem may be, that the raw support for your camera got lost. For some posters it helped to register the raw support again, see this post by Alan Roseman:
    Aperture 3 preview of raw file greenish
    If this does not help, you may need to reinstall Lion to bring back the raw support.
    But if the problem occured independent of a new installation, ypu may have a problem with your camera or the card you are using. Have you tried to use a different card or to reformat the card in the camera?

  • I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit ? And office pro 2013 64 bit too?

    I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows programs I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit or just install 32 bit? (Going with Win7 as I hate Win8). And I will install Office Pro 2013 64 bit too or 32 bit or is that automatically selected by the underlying OS (I use Word, Excel and Access mainly for a membership database of a local club) ? I am not a power user so would appreciate advice on way to go

    Again thank you.  If I only use word, excel and access in the Win environment and Mac OS for email and safari for internet do I need anti virus software . Ie my connection to the world is mac only and I use office pro only to ruin the club, newsletters, membership database etc. and of course anything I do there can drag/drop to the mac environ to email.  That's my understanding anyway.  Next will my existing .pst file copy directly into mac mail or do I have to runs translator  as I recall reading something about that ages ago when I started thinking Mac

  • All items are copied into Credit Memo request

    *Dear All*
    *Suppose I have created one scenario in which there is material code with one free goods and run uto the billing.*
    *I just need to know while creating Credit memo request wth reference to Billing,All items are copied into the sales order.My concern is that we can not hide free goods item in return order through Item selection.*
    Plz suggest on that issue

    Hi
    Yes you can set it up in the copy control of the item category so that it is not copied in the return order. But there is a specific reason why SAP would copy it into a return order. Suppose you sell goods and give something free, then based on the principle that the goods which were free were sent with the charged goods, it is expected that if the charged goods are sent back the free goods should also be returned.
    Thanks
    Indranil

  • Imported old computer via time machine into new 2012 macbook pro, but its still running ilife 09 instead of 11?

    imported old computer via time machine into new 2012 macbook pro, but its still running ilife 09 instead of 11?

    I am assuming you had iLife 09 on the old computer - when you moved everything over, that came along with it.
    I also have older versions of iLife (on install disks) and just recently got a new 2012 Macbook Pro. I noticed that iMovie 11, iPhoto and Garageband (I think) are listed in my Mac App Store Purchases with a notation to "accept". So you might want to check MAS to see if the apps are sitting there.
    Now, I have chosen not to accept them for now for two reasons: I have iLife 11 on a disk and prefer that rather than having it tied to MAS/Apple ID and as long as I have my disk version installed, I also still have iDVD which I use a lot. I'm not sure if "accepting" those three from MAS would wipe out my iLife 11 installs including iDVD (which would be unacceptable for me). So, since I already have the latest version, I've opted to ignore the "accept" and, in fact, will leave it like that - if I ever sell this machine, the buyer can then accept them if they want with their own Apple ID. So before accepting the apps (if they are listed in MAS), you might want to check to make sure that your iLife install isn't wiped out - that is, if you have iDVD and want to keep it.

  • I want to upgrade my phone to the 4 or 4s.  My macs are still running Tiger.  If I bought an iPad 2, could I sync everything to it from the 4 without using a Mac at all, and then be able to iCloud my calendar and contacts, etc?

    I want to upgrade my phone to the 4 or 4s.  My macs are still running Tiger.  If I bought an iPad 2, could I sync everything to it from the 4 without using a Mac at all, and then be able to iCloud my calendar and contacts, etc?

    Radiation Mac wrote:
    And you must be using a recent version of iTunes on your iMac in order to activate the iPad,  So, no.
    You don't need a computer to activate a new iOS device anymore. Anything with iOS 5 can be activated over a WiFi network (or cellular if that applies).

  • Active Users Request is still running for hours in Release 12

    Hi Friends,
    Today I have installed the Release 12 in the Red Hat AS 4.0. Installation was successfull.
    All the Concurrent Managers are up and running.
    I have run some requests in the Paybles, Receivable..
    Requests are running for hours..all are standard reports...
    even
    Active Users Request is running for hours..there is no end...
    Friends...
    How to trouble shoot it???????????
    Please give me advice...
    Regards,
    Subbu

    Hi,
    Thanks for the reply......
    Is this a fresh installation? If so, what version? Which OS?
    Ans: Yes This is a fresh installation...After InstallationAll concurrent Managers are up and running...
    Was this working properly before? If so, what modifications have you done?
    Ans: As this is a fresh installation. This is first time to run the requests. After installation, when i run the requests, I got error like libmawt.so is not opened. I have given libmawt.so file path in the LD_LIBRARY_PATH. After setting libmawt.so in the LD_LIBRARY_PATH. this time I did not before error. but request is running for hours..there is no end.
    Have you tried to recover the CM from OAM?
    Ans: ya, I tried, but not helpful.
    Tracing should be helpful, did you try to run CM Diagnostics test?
    If you shutdown the CM and submit the request, what do you get?
    Ans: I got status as Inactive and no manager
    This is the error in the my manager log file
    Routine AFPCMT encountered an ORACLE error. ORA-01012: not logged on.
    Review your error messages for the cause of the error. (=<POINTER>)
    _ 2 _
    Routine AFPCSQ encountered an ORACLE error. ORA-01005: null password
    given; logon denied
    I tried to relink FND executables using adadmin. But it did not sovle out my problem. As this is solution in metalink for above error.
    My Version is : Release 12 on Red Hat AS 4.0
    Regards,
    Subbu

Maybe you are looking for

  • Web Services and XML Object

    Hi All , The types supported by JAX-RPC seem not to include any XML object (i.e. org.JDom.Document). But OC4J supports this. Any one can give me direction if any other tools can permit me in creating web services which will permit to exchange XML obj

  • Indesign - Wrong order of pages when printing

    Hello I'm using Adobe Indesign CS4. Recently i decided to make my first "booklet". There are 80 pages - mixed text and images. When I try to print it as booklet I have problem with the order of the pages. After the page 26 or so it starts to print th

  • Library gone crazy!

    My library (and playlists) have developed some odd quirks. Some song names, artwork, and actual files don't seem to be properly associated anymore. I recently hit play on a Rev. Gary Davis song and NWA started playing. Songs I never put on playlists

  • GS1 characters in PDF417 barcode format

    Hi, I need to use PDF417 with GS1 Auto Identifiers for printing Barcode. Is it possible to use this symbology for GS1? Let me know the approach to go ahead with this requirement. Thanks Madhu

  • Infospoke Extraction Failing

    HI all, Good Day. I am trying to execute an infospoke build on an ODS. WHen i execute it, it is failing and the message i get is Editing or Reading of Data Packet 000001 Cancelled System error: RSDRC / FORM AUTHORITY_CHECK RSDRC / FORM AUTHORITY_CHEC