Request still running

Hi Expert,
I did extract data for SAP HR Recruitment from source system (SAP R/3) to Cube in BW 7.0, when I ran the InfoPackage, the message always with status "Request still running" (detail message --> missing message: Number of send message) until few hours, no data extracted to PSA.
But the problem only in 0APPLICANT (text and attributes) datasource, no problem found in the others Recruitment datasources.
I've to DataSource replication, delete/re-create infopackage, re-arrange transformation. And I've check source system using RSA3 and Applicant data available in the source system.
I've check using SM50, the process always running but never finish (status always Yellow).
Is there any solution for this problem ?
Regards,
Tri Wicaksono

Hi....
Have you checked the extraction job in the Source System ...........copy the request number ......go to the source system...........SM37......put *REQXXXXXXX........check whether the Job got completed or not.....
Also , In the IP Monitor screen....in the Menu Bar ---> Settings --> Evaluation of requests (Traffic Lights) --> For the option " If no data is available in the system the request "......you should select "Status Successful".....by default it will be "Status Successful" only...until and unless someone change it manually....
Also check for short dump and TRFC..........in both source system and data ware house.........in the Menu Bar --> Environment.......there you will get all the options....
To check the Short Dumps.........you have search for the Request Number.....if it is there it means load went to short dump........
If TRFCs are stucj press F6 to push it........
After that also if it doesn't progress....it means it went to dump.....then change the stsus to red manually and repeat the load......
Regards,
Debjani.....

Similar Messages

  • Request still running no idocs are arrived into BI

    Hi Experts,
    I'm working on EHP1[BI 7.01] and trying to load the data from R/3 system with generic data source. The records are updated in PSA[data source] and which is showing "12:25:21 ( 15 From 0 Records ) " and with yellow status with the below information.
    Request still running
    Diagnosis
    No errors found. The current process has probably not finished yet.
    System Response
    The ALE inbox of BI is identical to the ALE outbox of the source system
    or
    the maximum wait time for this request has not yet been exceeded
    or
    the background job has not yet finished in the source system.
    Current status
    No Idocs arrived from the source system.
    I checked different threads relating to this issue with different solutions like checking WE20, BD87, tRFC etc., but still i'm unable to resolve this.
    This is very urgent issue could anyone please help me in resolving this issue..
    Thanks & Regards,
    Amarnath

    I mean.. Once u press Source system.. it will ask u for the ID and PWD.. once u give that.. it will ask for the data range .. by default it will be todays date as ur has started today only.... and then execute...
    it will take u to SM58 screen.. there u just see the status of the different IDOC entries... if u can see the Executed as status then u can press F6 to push it to BW..
    If u see the status as Executing then u need to wait as the operation is still running....
    .. In practive if u feel that this load is taking long time compared to the actual.. then u can go ahead with the the repeat of the load by killing the present load in the source system.. and removing the bad req from the ur target..
    thanks
    Hope this helps.

  • Request status is in Red, where as message is "Request still running"

    Hi,
    In my production system, one data load showing red as status,while in status tab tab it is giving message that request is still running.
    Please give me your valuable suggestions, why it is showing linke that and my next steps in this case.
    Thanks in advance.
    Thanks And Regards,
    Narayana K.

    Hi,
    It might have occure because of Time out.Your Bw system is still searching for the request while the request already got loaded virtually.
    Just try to do a repeat if possible.
    Hope this helps
    Assign points if useful
    Regards,
    venkat

  • Conc request still running

    Hi Hussen,
    One conc request is still running, it should be in completed in couple minutes.
    When i checked it's parent request, it is in Phase:Running Status:Paused state.
    Any help?

    Hi,
    Please mention the application release along with the database version and OS.
    One conc request is still running, it should be in completed in couple minutes. Is this a standard or custom concurrent program? Has this ever worked? If yes, any changes have been done recently?
    Please verify that there are no locks in the database from the backend.
    When i checked it's parent request, it is in Phase:Running Status:Paused state. This is an expected behavior if the child process is still running.
    Regards,
    Hussein

  • Request still running but?

    Hi,
    My request is running , but in the data target the request is set to green why?
    give me the solution
    and am not able to see the data in the data target
    data is there in PSA
    Thanx in advance,
    Ravi.

    Hi Ravi,
    Please check with the Tcode -SM37  whether your job is complete or not.
    If Your job is not complete then you are unable to see the data .
    If your job is complete and request is still running then kindly check the log of the  you job in sm37 only from that you can come to the detail that why the status is green and the request is still running.
    Rgds,
    Hirdesh Gupta

  • CCA9 DELTA STILL RUNNING

    Hi Gurus,
    we are loading cca9 delta on daily basis. Today delta is giving problem like.
    data has came to PSA, DATA selection has been ended at R/3.
    STATUS  :request still running.
    Current status
    The processing of the data was not finished.
    in extraction tap record sent still it is in yellow.
    process data in update rules.
    we change the QM STATUS 'RED' trying to load from PSA Again it is not allowing.
    Could you please some one help me on this.
    we have to provide the data to users at any cost.
    Waiting for response.
    Thanks
    srini

    Hi Krish,
    I will appreciate your quick response.
    I have done it but still repeat also we are facing the same problem.
    Please let me know any procedure beyond this.
    I will be thankful for quick response.
    Regards

  • Req still running

    Hi
    I am currently working in BW3.5
    I have 8 datasources which are delta load from R/3
    There is a issue with one datasoucre as it is not retreiving the data from R/3
    Request still running (0 From 0 Records)
    Could you pls let me know as what could be the issue

    Hello Pavan,
    I think there is a problem in your load. I think you should cancel the load right now. And delete the red request.
    After that you can make another load. I am quite optimistic that it will take all the delta records.
    In anycase the system will prompt you whether or not your delta will be lost or not so you can act accordingly.
    Kindly please do post back if the queestion sitll hangs.
    Close the thread if you have got an answer to the question.
    Regards,
    Den.

  • Not showing part of a site,having flash10.1.1 on MAC and download request from firefox to fix troubles,impossible,after 20 minutes is still running!!

    from 2..3 weeks,firefox ,even with this beta version,sometime..closes unespectedly (1)...
    then it is impossible to see a part of a site..the account details of my bank,but with safari is ok (2).
    when firefox requests to download an update..to fix troubles..after 20 minutes ..is still running,i tried 2 times..same result,so i interrupt download.
    3 things...

    You need to start Firefox 4 in 32 bit mode on a Mac.
    See http://kb.mozillazine.org/Flash#Flash_does_not_work_in_Firefox_4_-_Mac_OS

  • Active Users Request is still running for hours in Release 12

    Hi Friends,
    Today I have installed the Release 12 in the Red Hat AS 4.0. Installation was successfull.
    All the Concurrent Managers are up and running.
    I have run some requests in the Paybles, Receivable..
    Requests are running for hours..all are standard reports...
    even
    Active Users Request is running for hours..there is no end...
    Friends...
    How to trouble shoot it???????????
    Please give me advice...
    Regards,
    Subbu

    Hi,
    Thanks for the reply......
    Is this a fresh installation? If so, what version? Which OS?
    Ans: Yes This is a fresh installation...After InstallationAll concurrent Managers are up and running...
    Was this working properly before? If so, what modifications have you done?
    Ans: As this is a fresh installation. This is first time to run the requests. After installation, when i run the requests, I got error like libmawt.so is not opened. I have given libmawt.so file path in the LD_LIBRARY_PATH. After setting libmawt.so in the LD_LIBRARY_PATH. this time I did not before error. but request is running for hours..there is no end.
    Have you tried to recover the CM from OAM?
    Ans: ya, I tried, but not helpful.
    Tracing should be helpful, did you try to run CM Diagnostics test?
    If you shutdown the CM and submit the request, what do you get?
    Ans: I got status as Inactive and no manager
    This is the error in the my manager log file
    Routine AFPCMT encountered an ORACLE error. ORA-01012: not logged on.
    Review your error messages for the cause of the error. (=<POINTER>)
    _ 2 _
    Routine AFPCSQ encountered an ORACLE error. ORA-01005: null password
    given; logon denied
    I tried to relink FND executables using adadmin. But it did not sovle out my problem. As this is solution in metalink for above error.
    My Version is : Release 12 on Red Hat AS 4.0
    Regards,
    Subbu

  • Request is running yellow with 0 records

    hi
    insource i have 14 records, i am running infopackge load to psa? i loaded immediately, its showing yellopw with 0-0 records.
    i deleted request and run again i am facing same problem what could be the reason

    Hi Suneel..........
    U hav checked the extraction job?................it is in released state..................right......
    Hav u checked the RFC connection(SM59).............is it ok........
    If still it is released state..............as already mentioned.................load at this time in ur system is huge................due to this there are no free work process...............u can try to change the server and then run the load....................Go to SM66...........there check which servers are showing in Waiting state............that means loads are not much in those servers..................then go to SM51.............double click on the desired server...............then in the top where we write tcode.........there write /n........................a new session will open...................now u r in the new server..........here again execute the load.....................it may progress here............but be careful.............since already one job is in schedule state.............after some time it may become active...........at that time u hav to cancel the job.................otherwise load will fail due to lock issue................
    Regards,
    Debjani.........

  • M-bdoc is still running but is ok!!!!

    hi all,
    i made a m-bdoc to transfer a record from BUT000 R/3 to BUT000 CRM;
    i found the new record on BUT000CRM, and the transaction SMW01 says that the process is ok,
    but on the transaction R3AM1 i read that the bdoc is still running...from yesterday....
    can anybody help me??
    (excuse for my bad english....)
    Message was edited by:
    simba simba
            simba simba

    What you need is not a delta load, but only a complete re-load of the whole customer data of which the adress is an important part of it. You might want to have a look at the request functionality which downloads BP data (adress / adrc table included) and other objects as you configure it. It can be found right next to the definition and download of standard (initial or synchronizing) downloads.
    Regards, Kai

  • Urgent : req still running

    hello,
    i had strucked at ,one of ODS is uploading to three cubes ..where the req is still running the message is given as
    It is possible that data packets must be processed manually.
    error in inbox
    00397 IDocs searched through for date 06.12.2006.
    00006 of the IDocs belonged to this request.
    00006 IDocs found for this request up until now.
    regds
    SP

    Hi,
    Need more inputs,
    Let us know what is the technical status in the monitor screen for upload?
    (the one status below the QM status). If it shows processing...then wait till you get some error.
    <u>Other options:</u>
    check the job log in SM37 for the running upload.
    If the job has finished check at what stage the load is running.
    Check if source system is working fine.
    Regards,
    Vijay.

  • How to make tomcat still running after reboot

    hi all,
    i want ask about how to make tomcat still running after our computer reboot.
    so our server still can serve the the request without we start manualy the tomcat.
    please replies
    thank's before

    *nix or win32 or other?                                                                                                                                                                                                                                           

  • Compression still running

    Hi,
    I am compressing CO cube, single request with about 22,200,000 records. I expected it to run for about 5 to 6 hrs, but it has taken 30 hrs and still running.
    is there any thing i have to check .. apart from table space..
    Any inputs..
    Thanks,
    Pradeep S.

    HI,
    My server is free. I am the only person who is logged in. My back end is DB2.
    The Sm37 job log says.....
    Job started
    Step 001 started (program RSCOMP1, variant &0000000000043, user ID E002241)
    Performing check and potential update for status control table
    FB RSM1_CHECK_DM_GOT_REQUEST called from PRG RSSM_PROCESS_COMPRESS; row 000200
    Request '23,932'; DTA 'ZCOOM_C29'; action 'C'; with dialog 'X'
    Leave RSM1_CHECK_DM_GOT_REQUEST in row 70; Req_State ''
    sm50 , in the background a SQL statement is running... which means to update E table. The backgroung job is showing the same status for the entire 30 hrs of the compression job.
    Can any be done w.r.t this compression issue.....
    Thanks,
    Pradeep S.

  • I am trying to uninstall firefox and when i click uninstall it says the program is still running so i stop it and it exits the remove program

    im trying to uninstal firefox so i went to my control pannel clicked on add or remove progams then clicked on mozzola firefox and clicked remove it said it was still running so i clicked ctrl alt dlt and clicked task manager and ended firefox from running and when i did that the box to uninstall firefox exited so i clicked it again and the program started running again i dont know what to do i need firefox uninstalled

    I assume you are using windows. There are two options:
    1. Try restarting your computer and then try uninstalling.
    2. Firefox might be a program that starts immediately upon booting. In that case, go to the task manager, end all tasks that firefox is running. Then try uninstalling firefox

Maybe you are looking for