Require TCode used by user for sap query created through SQ01

Hi All,
I have number of SAP Query in production that currently are used by different-2 user & created through SQ01
My question is how to know the TCode that used by user for SAP Query.
Thanks In Advance
Regards
San

Charlie
You did not get the question.
I knew the TCode of the query which I had created using tcode SQ01. user is using this query to see the report
Like I created query named 'order_line_details'. This query is basically to see the order & other details. To use this by user one TCode'zncv_ord_item'  has been created.
So in the system lots of query are available. So i want to know the Tcode for those query that are using by user.
Thanks in advance
San

Similar Messages

  • Transaction code for SAP query reports

    Hi All,
    I am trying to create transaction code for sap query report but couldn't go further.
    1) Created User group in SQ03
    2) Created infoset in SQ03 and assigned that to the user group
    3) Created query in SQ01 using the infoset.
    I executed the report in SQ01 and it is working fine.
    Now I try to create a transaction code in SE93 using the steps mentioned in the following link:
    Assign transaction code to SAP Query (created via SQ01)
    But when try to execute the report using the transaction code, it is giving error message 'User group xxxxxx is not yet created'
    Could any one advice me if I miss something? Or please help me to create this transaction code and transport to production?
    Thanks in advance

    HI,
    based on the thread you've already mentioned:
    In SE93, Create a Paramter Transaction
    -> Transaction = Start_report
    -> In default values, give the below details:
    D_SREPOVARI-REPORTTYPE = AQ
    D_SREPOVARI-EXTDREPORT = Name of the Query
    D_SREPOVARI-REPORT = User Group
    So check if the user group is typed correct in SE93 and check also if the user group exits in the system where you are trying to run the transaction.
    best regards, Christian

  • Issue in transaction code creation for sap query report .

    Hi  Gurus,
    I have a requirement to create transaction codes for sap query reports. I found two ways to create transaction code for sap query report
    1) By Generating program for sap query report and creation of transaction code for that generated Program. in tcode.
    2) By using parameter transaction options in start object of se93
    What are the difference between creation of these two ways. Please specify  the advantages and disadvantages of both methods.
    Regards,
    Suneel Kumar Uggina.

    Hi Jogeswara Rao,
    But I am getting problem while transporting form development system to  the production system. After transporting to Production system  I have used the code created in development system, but it is giving Error ' No Program Found for that Transaction Code. And  I would like to know  on what conditions should I have to  use the First one  and as well as a second one in sap query reports.
    Thank You,
    Suneel Kumar Uggina.

  • Any one used quick sizer for SAP MDM?

    Any one used quick sizer for SAP MDM?

    Hi Subin,
    Quicksizer is SAP's online sizing tool.
    The sizing process uses the web-based Quick Sizer tool, which calculates SAPS requirements based on throughput numbers, and the number of users working with the different SAP Business Suite components in a hardware and database independent format. You can find further information about the SAP sizing process at the following location
    http://service.sap.com/sizing
    After obtaining the results of a Quick Sizer project, work with the SAP Competency Center of your specific hardware vendor for sizing and architecture services as you would for physical environments.
    For further details please go through this:
    http://www.sdn.sap.com/irj/sdn/performance-analysis
    Thanks,
    Ravi

  • How to find backend user for sap bw on Hana

    Hi expert,
              how to find backend user for sap bw on Hana , which are used to communicate with Hana.
    Many Thanks.

    Hi There,
    Goto DB02,
    Click on SQL Editor:
    Execute the below Query:
    select :session_user from dummy;
    Regards,
    Krishna Tangudu

  • SAPinst Error--Phase 2--Creation of User for SAP System

    Hi,
    I am installing SOLMAN 7.0 on Red Hat Linux 5 with IBM Java SDK version 1.4.2_10
    When I run the SAPinst it gives ERROR in the 2nd phase of Creating users for SAP system.
    The SAPinst log file shows as below:-
    WARNING[E] 2008-06-07 17:49:28.362
    FSL-01002  Unable to create account user="orasmd". useradd: cannot create directory /oracle/SMD (return code 12)
    WARNING[E] 2008-06-07 17:49:28.363
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2008-06-07 17:49:28.427
    FCO-00011  The step createAccounts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .
    Please suggest and help me in resolving this error asap.
    Regards,
    Abhijeet K

    Hi,
    Thnx a lot for the suggestion Markus
    I have created the directories required.
    The SAP installation has started, but now I am getting the message as below during the ORACLE DB Installation phase,when I run the Oracle ./RUNINSTALLER in Bash Unix:-
    [orasmd@SOLMAN SAP]$ ./RUNINSTALLER
    oracle_stage is not set (OK)
    oracle_base is not set (OK)
    oracle_home is not set (OK)
    oracle_sid is not set (OK)
    oracle_home_name is not set (OK)
    oracle_inst_group is not set (OK)
    from_location is not set (OK)
    tmp_netca_file is not set (OK)
    tmp_dbca_file is not set (OK)
    Working in /oracle/stage/102_64/database/SAP ...
    The environment variable ORACLE_HOME is not set! abort ...
    I have set the ORACLE_HOME env variable as below:-
    ORACLE_HOME=/oracle/SMD/102_64
    export ORACLE_HOME
    But I get the same message again as above.
    Do we need to set the ORACLE_HOME env variable in the BASH_PROFILE directly??? Coz I heard that if we set it with the Export command then the env is set only for the current instance and not permanently.
    If so what is the exact entry I need to make in the BASH_PROFILE???
    Rgds,
    Abhijeet K

  • How can i get the list of all tcode used by user of particular module

    Hi,
    How can i get the list of all tcode used by user of particular module (e.g FI , MM ,PP) within year .
    Regards
    Vikram

    Login to your SAP System
    Run TCode SE16
    Type Table Name : TSTCT
    Press F7 Key (Table Contents )
    Go to Settings in menu bar
    Select User Parameters
    Under Keyword select Field Label and press green check mark
    Select your criteria in Data Browser and execute
    You will see all t codes in there
    Regards,
    Yogesh

  • Transport request for SAP Query - SQ01, SQ02, SQ03

    Hi Experts,
      I have a doubt, Whether we can have request for SAP Query which have created from Transaction SQ01.If Yes then How to do that....?
    Thanks in Advance,
    Chetan Joshi

    Hi,
    Use the program RSAQR3TR
    Thanks
    Naren

  • Is there any way to find out a Tcode used by user in a particular interval.

    Hi
    Is there any way to find out a Tcode used by user between 10/8/2009 to 31/8/2009, in production?
    Satish.

    Yes i have been trying SE16N only. But i am unable to pull data based on dates (Aug/8 to Aug 21)... its showing list of users who have accessed the tcodes directly for entire month....
    Se16n ->Export mode->month->08/2009
      --->     Transacction profile -->Standard
    I want to find out only users who have used a particular tcode during those dates.....in august..
    Satish

  • Advantages of using laster printers for SAP SCRIPTS

    Dear Friends,
    Here client is saying use scripts for Dotmatrix printer, for all graphics. can i know
    <b>Wht are the advantages of using laser printers for SAP Scripts and wht are the disadvantages of using Dot-matrix printer.</b>
    Thanks & Regards
    Hussain

    Dear Friends,
    Here client is saying use scripts for Dotmatrix printer, for all graphics. can i know
    <b>Wht are the advantages of using laser printers for SAP Scripts and wht are the disadvantages of using Dot-matrix printer.</b>
    Thanks & Regards
    Hussain

  • Advantages of using laser printers for SAP SCRIPTS compare to Dot matrix

    Dear Friends
    <b>Wht are the advantages of using laser printers for SAP Scripts and wht are the disadvantages of using Dot-matrix printer.</b>
    Thanks & Regards
    Hussain

    Dear Friends
    <b>Wht are the advantages of using laser printers for SAP Scripts and wht are the disadvantages of using Dot-matrix printer.</b>
    Thanks & Regards
    Hussain

  • How to get default input values when using promt user for input

    I use "promt user for input" to input some values. The messageboard appears with blank boxes then I will input  new values. I want to make some default values in this blank boxes so that I needn't to enter new values. Is it possible ?

    Right click on he Express Vi terminal and choose open Front panel to convert it into a standard vi. Then open it. Enter a default value for each control, then right-click on the controls and go to data operation > make current value default.
    Message Edité par chilly charly le 11-18-2007 12:52 PM
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        

  • Request for sap query

    can u tell me how to create a transport request for sap query

    i  dont know the exact way to create the transport request but i have done by this way.
    after creating the query come out and go to se38 by default it will show a program name like asbksll------- like this  and now i have copied it to one z program and transport it.
    it may solve your problem.
    regards
    shiba dutta

  • Concurrent user for SAP Epo

    Hi,
    Please can anyone will help by giving the steps for the configuration of concurrent users for SAP EP...
    thanks
    Sonu

    Hi Sonu,
              Please follow the bellow link's which provide you very good information.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/59/bf2287b3cb5e48af94f99929ad15b9/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/4f9b3e1f1e7c7de10000000a114084/frameset.htm
    Regards,
    Hari.

  • Can we assign a T-ode to Query ( Created through SQVi , QuickViewer)

    Hi!
    Can we assign a T-code and transport the same in differnt -2 clients for the query craeted through QuickViewer ( SQVI )
    What  i need to do so , Please guide .
    Regards
    Sheetal

    Hi Farrukh Khan
    1>go to SQVI t code and  enter your query name and press enter
    2>In the menu path select Quick view--> additional functions-->Generate Program
    3>After Generating the program In the menu path select Quick view--> additional functions-->Display report Name
    4>Now in se38 enter the report name in Program field and execute
    5>You will get the Initial Selection screen of the report . Go to Menu of System -->Status
    6> Note down the Program name and Screen number
    7>Go to SE93 and Create a Z tcode for the query, Enter the description  and importantly you have to select the 2nd Option radio Button Program and Selection Screen (Report Transaction) and Press enter
    8>In the next screen enter the Report name In Program field and enter the screen number
    9>In the classification Section select Professional user  Transaction
    10>In GUI support section select all the options  i.e SAPGUI for HTML,Java,Windows
    and save
    the system will ask for Package select your package if not there then select local object
    now execute the Z tcode your report will run sucessfully
    Regards
    Vijay hebbal

Maybe you are looking for