Required Config and testing Docs for cash management/cash forecasting

Hi All,
My client need to implement cash management/cash forecasting ..
Can anyone send the details Required Config and testing Docs for the same as earlier i have not worked in this area..
Thanks in advance...
Regards,
Sandip

Hello
Please check the below link
help.sap.com/bp.../J11_BB_ConfigGuide_EN_IN.doc - United States
Thanks & Regards
Phaneendra

Similar Messages

Configuration docs for Asset Management

Hi.
Does anyone have configuration docs for Asset Management
thanks
Tom

Go to http://help.sap.com/ and click on SAP Best Practices. Look for Building Blocks Library under the Additional Information on the right side of the page. In the Building Block Library, look for J10- Asset Management. Click on that and thereafter, under Technical Documentation, click on configuration guide. There you should have all the information or at least some of the information you need on Asset Management.

Define a requirement type and a class for each strategy

Hello,
Where can I define a requirement type and a class for each strategy?

Hi
Follow the following path
SPRO -Production-Production Planning- Demand Management -Planned Independent Requirements - Requirements Types/Requirements Classes
then Planning strategy - Define Strategy
regards
ramakant

Need a Doc for Case Management-Interaction center

Hi all,
I need a SAP doc for Case Management-Interaction center.
Please send me on [email protected]
Will surealy get points .
Nice weekend

Hi Babu,
Please check the following SAP Help link:
http://help.sap.com/saphelp_crm50/helpdata/en/89/c5be40d7e4cc38e10000000a155106/frameset.htm
Hope this helps,
Kind regards,
KZ

I downloaded lion but now I cannot access my word and excel docs for work. What can be done easily to open all my files?

I downloaded lion but now I cannot access my word and excel docs for work. What can be done easily to open all my files?

tamanacoazur wrote:
Have not a clue if this a LION problem or Microsoft problem. My gut says Microsoft as they acknowledge the problem in their support section. Their solution: Open files with previous version of Word. That is completely unacceptable as a solution in my opinion. Why would have I ever bothered to upgrade to 2011 if I had known I need to keep a version of 2008 running on my computer.
Honestly I don't know if it's a Lion or MS problem eihter. I have been using Lion for many months with Office 2011 with no problems though.The earliest version I had on my machine was 2008 and 2011 opened those files with no problems at all. As Dave mentioned earlier he opens Office 2004 files all the time with 2011.
One thing you might want to do is restart the computer while holding down the Option key then select the Restore Volume and run Disk Utility and repair the Disk Permissions on the HD. Run DP at least 2x.

National Conference on "Exploration of Computation and Information Technology for Disaster Management"

The main theme of the National Conference on "Exploration of Computation and Information Technology for Disaster Management" is
"bring together students, researchers, academicians and industry professionals from all over the country to discuss current IT and
computer science trends and challenges in disaster management activities and enhancement of IT and computer science technologies to achieve better improvements in disaster management operations".
For any queries contact us at [email protected]
Website: http://www.ecitdm.in

Title: WiCOM 2009 Call for Papers: Sept. 24-26, 2009, Beijing, China--yr
2009IEEE无线通信，网络技术及移动计算国际会议征文
======================================================================
The 5th Intl Conference on Wireless Communications, Networking and Mobile Computing (WiCOM 2009)
CALL FOR PAPERS
http://www.wicom-meeting.org/
Beijing, China September 24-26, 2009
====================================================================== Topics:
Wireless Communications
Networking and Systems
Services and Application
This conference is sponsored by IEEE Communications Society, Beijing University of Posts and Telecommunications,
Beijing Institute of Technology and Wuhan University. All papers accepted will be included in IEEE Xplore and
indexed by EI. For more information, please contact: [email protected]

Design and Testing Suggestions for Different Screen Resolutions

Intermediate Dreamweaver CS3 user, in need of "Design and Testing Suggestions for Different Screen Resolutions".
Thank you, J. Chavez

Adobe Browser Labb and BrowserShots.org

Change Management and Test Workbench for documentation

Hi,
I would like some clarification on the association between change requests and test workbench.
I'm going through scenarios such as creating a maintenance project, creating a task list and service message and then creating a transport request.
During these steps, I want to document the test results prior to migrating these transports into the production system.
My questions are - how do you link the maintenance project and also urgent corrections to a test procedure and documentation. It appears that by using solar01/solar02 and stwb_2/stwb_work, these tests are linked to a project and not necessarily a "change request"
I greatly appreciate if you can elaborate the association between the various areas a bit clearer for me.
Thanks!!!

You need to look for information on usage type "DI", "Development Infrastructure" or "NWDI" (all common abbreviations for the same thing). There were some very good presentations on NWDI at TechEd this year.
Here are some links to help documentation:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/63/7a4d40eae76f13e10000000a1550b0/frameset.htm">Administration of the Development Infrastructure</a>
<a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developersguide">SDN NetWeaver Developers Guide</a>
Rich

Transaction STWB_1 and Test catalog for IS OIL

Cannot find Test catalogs TK IS-OIL* from transaction STWB_1 as mentioned in document Appl_Test_doc_600_1.pdf attached to SAP Note 890458
I tried to do the following from Appl_Test_doc_600_1.pdf:
Call transaction STWB_1 or from the SAP menu, choose: Tools → ABAP Workbench → Test → Test Workbench → Test Organizer → Manage Test Catalog Choose Utilities → Manage Favorites (Shift+F9) The Manage Favorites dialog box appears.
Select Add favorite (Shift+F5) The Favorites dialog box appears.
Enter OIL_ECATT in the Management Data Package field. Choose Execute (F8). Select all three test catalogs
TK IS-OIL APT
TK IS-OIL APTPRA
TK IS-OIL SC Choose Copy (Enter).

I have ECC600 and not 46C as in the not you sent me
Anyway thanks for the support
just for information, in this case we have to Apply ECAK020859.SAR for eCATT and P7IK039071.SAR for custumizing (OSS note 890458)
Regards

How to configure and test workflow for Creating Leave Request

Hi,
When I select leave request iView in portals I get an R/3 screen titled "Create Leave Request".And when I fill in the details for approver and press send I get this error message "You are not one of the possible agents of the task".
So help required to configure and test the workflow behind Create leave request iView.
Regards,
Pavanmeet.

Pavanmeet,
you have to set all activities in the workflow to "general task" as well, not only for WS12300111 itself (doubleclick on each symbol with the "triangle").
check the status of the sent leave request in transaction PTARQ (Display Documents). Here the "next agent" & the "pers. no" of the next agent is of interest.
logon with the user, that is saved in infotype 0105 of the above mentioned pers.no. there should be the approve request.
you can check the status of the workitems with SWI1 (i assume your system is prepared for workflows , check SWU3)
Message was edited by: Achim Hauck

How to configure and test workflow for Creating a leave Request?

Hi,
When I select leave request iView I get an R/3 screen titled "Create Leave Request".And when I fill in the details for approver and press send I get this error message "You are not one of the possible agents of the task".
So help required to configure and test the workflow behind Create leave request iView.
Regards,
Pavanmeet.

Pavanmeet,
you have to set all activities in the workflow to "general task" as well, not only for WS12300111 itself (doubleclick on each symbol with the "triangle").
check the status of the sent leave request in transaction PTARQ (Display Documents). Here the "next agent" & the "pers. no" of the next agent is of interest.
logon with the user, that is saved in infotype 0105 of the above mentioned pers.no. there should be the approve request.
you can check the status of the workitems with SWI1 (i assume your system is prepared for workflows , check SWU3)
Message was edited by: Achim Hauck

Distributing a deployment.config and deployment.properties for proxy settings.

I am trying to define the minimum config required to populate a deployment.properties with just proxy settings and point to this with a deployment.config.
I am finding that that recent versions of 1.7 and 1.8 do not adhere to the browsers settings properly and not all traffic is following the proxy rules in use by the browser. However, if I manually override all traffic to a proxy the applets running on internet based sites function (no intranet sites use java here). If I use a deployment.config, I can see the resulting proxy settings are enabled in the control panel app and the appear exactly the same as per user manual settings, however they are not correctly used.have any ideas?
Any one have any ideas?.
Thanks

Hi Kevin,
I am actually working on the same problem.
I need to deploy Java 1.4.2_07 on clients with a mandatory setup. I tryied the deployment.config and deployment.properties file but didn't get it working yet.
I guess we should share knowledge to find a working solution.
It would be nice, if you could email me at:
[email protected]
regards,
Volker

Required example blue prints doc for practice

Dear gurus,
pls send blue prints for practice, practice is over but real time project idea don't have pls send some examples of preparation of blue prints , or prepared blue print
document file
pls send to this mail     [email protected]
thanx , bhaskar

Hi,
Business Blue Print (BBP) is confidential file. No one will forward to you.
I will give some Directions to make your own BBP.
As per my Knowledge..
BBP means systematic explanation what we are doing in SAP.Functional Consultant will prepare respective module BBP.For Example HR/HCM Module have
*Section 1                                 Introduction     *
1.1Organization of the Document
1.2Purpose
1.30Definitions
1.4Acronyms
1.5References
1.6Audit Summary
*Section 2                     Enterprise Structure     *
2.1Purpose
2.2Scope
2.2 1In
2.2.2Out
2.3Business Requirements
2.4Configurable Items
2.4.Company Code
2.4.2Personnel Area
2.4.3Personnel Subarea
2.4.4Employee Group
2.4.5Employee Subgroup
2.4.6Assignment of Personnel Area to Company Code
and etc.., For every sub module we explain.

Config and test scripts of SOP

Hello All,
I am working on configuration of Flexible Planning.
I will have to start on the test scripts/cases soon and I am halfway with the config.It would be great if anybody could help me out with the config as well as test cases documents.
Thanks
Ravi

I have completed the config involved for SOP.
The scenario is my Client is going to get sales history from a legacy system uploaded to info structure(SXXX) and perform analysis.
I haven't worked on SOP's RCCP as most of my projects were involved in getting a file uploaded to DM and completing the PE.
I will have to come up with a graphical and report analysis anD match the RCCP with the sales history provided.Could anyone tell me what are the necessary fields that will be required from the legacy system to map it into SAP for RCCP.
It would be great if anyone could enlighten me with the process that goes with RCCP and the relevant formulaes necessary to know in the planning table.
I really appreciate the help in this regard.
Thanks
Ravi

Where can we see invoice doc. and payment doc. for asset based on its no.

Dear all,
For a particular asset, based on its number, is there any report which shows invoice, payment and other relevant documents.
Can any of you suggest me on this?
Thanks,
Kumar

HI
There is no direct standard report in Asset accounting for your requirement , but you can try the below--
Asset invoice means , if you have acquired your asset through raising a PO , then you have MIRO docnumber which is linked to Asset number, with the help of this FI document linked withh asset number you can find out the invoice documents against assets acquired.
Go to Bseg and search with asset number fields and doc type of MIRO I believe it will be RE ,it will show you the invoice docuemnts against the selected asset , then search for the clearing docs against these invoices in bseg , that will be your payment document.
So now have asset number ,invoice number ,payment doc number.
More logic you may apply like search for the link through MM tables , since PO is also having asset number , just check the link of Asset number with various documents and tables, you may ask your ABAPER to create a report or query for this.
cheers
Mukta

Required Config and testing Docs for cash management/cash forecasting

Similar Messages

Maybe you are looking for