Requirement: Insp lot of self Certified material should not get skipped

Hi Gurus following is req pls suggest me
Requirement: Insp lot of self Certified material should not get skipped
if there is a change in Material Revision. As of now Auto Usage Decision
takes place on Self certified material Lots. This happens even after
there is a material revision. This is undesirable as QC is Not able to
ensure the implementation of design changes.
Apps

i have understood the following from ur reply
new revision created by design- purchaser creates po- materials comes in quality - auto skip
quality don't come into picture in ur scenario
solution :
new revision created by design - while creating po they will get error q info record for new revision not present- intimation to quality for creating q info record - decide whether to insp or skip it - normal process
use of q info record
in material master maintain control key for q info record.
create q info record for material, rev, plant , vendor
keep rest evertthing as it is - as a normal procedure material will be skipped
when any new rev is created - while creating po they will get error q info record for new revision not present- QC will get intimation regarding this new rev. -after all approval u can create q info record for this new rev. and then only purchaser will be allowed to create po.
make necesary chages in plan after every new revision

Similar Messages

Excise Invoice should not get created without J1ID data for all material

Dear All,
We have a requirement that excise invoice should not get generated unless chapter ID data is maintained for all the materials in the invoice.( when there is more than one item and chapter id is not maintained for all the items)
At present excise invoice is getting generated for single item which has chapter ID maintained and the items without chapter ID data are left out from the excise invoice. This results in an incorrect invoice.
We want to ensure that excise invoice is not created, unless all the items in the billing document have chapter ID maintained.
Kindly advise as to how this can be done.
Regards,
T Saravanan

Dear Muralidhar, Lakshmipathi,
Thanks for the solution.
I have been able to solve the problem using the user exit mentioned by you.
Regards,
T Saravanan

Sales BOM Header Material should not come in J1IJ or delivery

Hi,
We have one depot plant, Now i am using the sales BOM, I have created one Material header with item category LUFM pricing at item level only, BOM is created, When I am entering the Header material in SO then alll child items are coming, then while creating the delivery all the child items and also the header items is coming in the delivery but same is coming in the J1IJ also I want that the header materal should not come in the J1IJ and it will be better if it is not in delivery if i set the indicator delivery block for header materia in SO then that item si not coming in Delivery but SO is shoing in Open SO as the header material is not delivered.
So is there any setting for this.
Also in quotaion I have maintain the item category assignment I have assign QT - LUFM - AGN
but whhen I am entering the header material in VA21 Ffor which the item category is LUFM system is giving the error message
No item category available (Table T184 QT LUMF )
regards,
zafar
Edited by: zafar karnalkar on Nov 24, 2011 7:56 AM

Hi,
Yes I want that the Header material should not come in J1IJ only. but i check the program of J1IJ it is selecting all the materials ref. to delivery number without any further check. also is it possible insted of SO if first we create the quotation in quotation therr willl be header material as well as child item but in SO only child item should get copy when creating ref. to that quotaion, I try with item category copy control, but then system is selecting non of the materils from Quotaion to SO, and when I allowed coopy control of header material from Quotaion to SO then it is copying Header as well as child items in the SO.
regards,
zafar
Edited by: zafar karnalkar on Nov 24, 2011 10:53 AM

Material type not getting displayed in the cube........

Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
Jeetu

Hi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier.

Excise invoice should not get created without PGI

Hi,
I have a scenario where the billing document is being generated by the customer without PGI after creation of outbound delivery for exports. (This is as per customer's requirement - Copy control maintained in VTFL for the same - copying requirements 11 )
This creates a situation - excise invoice can be created without PGI - which creates problems for customer. This should not happen.
Customer wants a check during the excise invoice creation - excise invoice should not get created if PGI has not been done.
Kindly advise as to how this can be done.
Regards,
T Saravanan

Dear Saravanan
Two options are there
- in your existing routine itself, you can specify the control in such a way that unless the preceding document is PGId
- apply excise user exits like J_1I7_USEREXIT_EXCISE_BEF_SAVE to achieve the requirement.
thanks
G. Lakshmipathi

I bought iTunes Match; nonetheless, on iTunes Radio I routinely get ads. Apple says that with iTunes Match one should not get ads. Whaddup?

I bought iTunes Match; nonetheless, on iTunes Radio I routinely get ads. Apple says that with iTunes Match one should not get ads. Whaddup?

Requiring Match to be switched on, even though we have paid, to get ad free Radio can be costly. Why?
Because if you want to listen to Radio with cellular data (not much data required) you are also agreeing to Match over cellular which can suck data like you won't believe.

Material cost not getting displayed in CN41N

Hi Gurus,
When we execute CN41N, Materials assigned to the Network activity are visible but the cost of each material is not getting displayed against it (under Proj. Cost Plan Column) and it is appearing as '0' whereas, it is appearing as an accumulated cost against the activity. I checked SAP notes for this problem, though I could see some notes which are very close to the problem but all are for Release 600 whereas we are using 604 (ECC 6.0). Have anyone encountered such problems or whether the cost will not appear against Material in CN41N.
Awaiting your valuable suggestions.
thanks in advance.
Vinodh

I have seen planned cost of material against material itself in structure report like CN41, CN41N under following conditions:-
1. Valuated Project Stock
2. Material is created using Reservation for WBS or PR+Res for WBS Procurement indicators.
3. Costing relevancy box ticked for material
4. Statistical Cost element exists for Inventory account.
I have not seen planned cost for non-stock item or material with res for network in project. This is purely based on my experience and I dont have any notes or help document to validate my statement.

Serices Material is not getting picked Up in Proforma Invoice

Hi..
While craeting proforma invoice for serices,service material is not getting picked up..
where can be the settings?
Thanks
Manoj

Check if the item category is maintained in copy control from Say Sales Order to Proforma Invoice. T.Code: VTFA. If Item Category not maintained, then maintain it appropriately.
Regards,
Rajesh Banka

Deletion material should not batch determine

Dear All
please help me.
Deletion flag set on material number then. How can this material number should not tack automatic batch determine during batch determination in process order.
and warning MSG should be display.
Thanks in advance...........
Jainashu

Do you already have the batch search strategy for that particular material ?

Issue of material should not be allowed if stock not available on that date

All SAP Gurus,
If we have zero stock for a material on 01.02.2009.
We make GR on 10.02.2009.
Now, if we try to issue the material on 01.02.2009 (after making GR on date 10.02.2009).
Then system allows me to post the document.
We don't want to restrict the back dated posting.
Only we want to restrict the posting if stock for the material is not available on that particular date (because it results in negative closing stock for that date.
How it can be done?
Regards,

Hi
Try making M7/021 message as error message and issue the material which is not there in stock.
Thanks

Order reservation should not get planned in mrp run

Hello friends,
Actually for a finished material i have created one production order by CO01.Because of it for semi finished material system created order reservation.I dont have any stock of semi finished material.Now i want while running the mrp run system should not planned this Order reservation of semifinished material.For these in configuration of availability check (Scope of check T.C OPJJ), I made the settings that system should not consider reservation (i deactivated the tick for include reservation) and for include depend reservation , i selected Donot check.And all these settings i made in checking group 02 and checking rule PP.After doing all these settings than also system is considering the order reservation for semifinished material and generating the planned order for it.
Do i need to do any other configurations?
Thanking you guys in advance.

Hi Jitendra,
Checking Control (OPJJ) has no relation with MRP.It is useful in the case of Plan and Production / Process Order only to find out Missing part.
Now come to MRP again.
You have a choice of only 3 type of stocks to include or exclude them during MRP run while rest of the things like (PO,PR,Reservation etc are consider by default)
Go to OPPQ and after selecting Plant go to Available Stock.You will find that options,
- Stock in Transfer
- Block Stock
- Restricted Stock.
And one more thing Reservation is not a available stock but its one kind requirement and if there is no stock then system will activate the Planning file entry and during next MRP run it will generate Planning proposal also.
Regards,
Dhaval

Sales text of material is not getting replicated

Hi Experts,
We are working on CRM7.0 which is connected to R37.0.
We have replicated materials successfully. Now in R3 we have modified sales text for few products. This change should have delta downloaded. But it is not happening. I have checked delta queues in R3 and CRM. All delta queues are cleared.
Eralier, I downloaded the product through request and with this sales text did flow. But, suddenly this is not flowing even when I am downloading the product through request.
Is there anything I am missing?
Please help.

Hi,
In PR and PO...you need not put f4(not mandatory).......just put material description e.g. ring*....press enter
also while searching by F4.....select the required tab first e.g. plant material by discription and put discription with * for wild crad search.
Hope Help U !
Regards,
Pardeep Malik

Release PR Should not get deleted in md51,planning mode 3

Hi all,
We are facing a problem in MRP run taken through transaction code MD51. This Problem (as explained below) will occur when MRP control parameter for Planning Mode will be set to u20183u2019 (Delete and recreate planning data).
During normal course, if MRP control parameter for Planning mode is set to u20183u2019, system deletes all open PR & Planned orders & creates new PR & new planned orders.
But in our business scenario, where we have release strategy for MRP generated PR, even these released PR get deleted. This results in re-analysis & releasing of MRP generated PR which itself is a tedious & time consuming task.
We are looking for a solution where PR will not get deleted during MRP.
Thanks
Sukumar
Edited by: skumar kalame on Nov 10, 2008 1:59 PM

Hi,
The planing time fence is maintained in MRP-1 view of the material in workdays. You can also have this defined in the MRP group. But the value in material master takes precedence over MRP group.
Use - It is a kind of safety fence which is used to protect any automatic changes to take place for firm order proposals during MRP run.
Depends on - Firming indicator needs to be maintained for the MRP type. This can be set in customizing for the MRP Type. This basically specifies how you want to firm the order proposals. Please note there are 5 types of firming
The SAP help for firming type reads as below:
firming type 0
The system does not firm procurement proposals automatically.
firming type 1
Procurement proposals that move into the planning time fence are firmed automatically, as soon as their date lies at least one day before the end date of the planning time fence. The date of new procurement proposals that are created in the planning time fence is displaced to the end of the planning time fence. These new procurement proposals are not firmed.
firming type 2
Procurement proposals that move into the planning time fence are firmed automatically, as soon as their date lies at least one day before the end date of the planning time fence. The system does not create any new procurement proposals within the planning time fence; that means, the system does not balance the shortage situation in the planning time fence.
firming type 3
Procurement proposals that move into the planning time fence are not firmed automatically by the system. All procurement proposals that are necessary for requirements coverage are displaced to the end of the planning time fence.
firming type 4
Procurement proposals that move into the planning time fence are not firmed automatically by the system. The system does not create any new procurement proposals within the planning time fence; that means, the system does not balance the shortage situation in the planning time fence.
If helpful award points
Regards,
Vivek

Business Area field should not get translate while doing allocations in co

Dear All,
In ecc 6.0 when we will be allocating expenses through assessment and Distribution the system credits sender cost center and debits receiver cost center,the same will be applicable for Business Area also.
But my client is having plant =business area for which they are making financial statements business area wise.
The client wants its business area not to get affected by above allocations ,Is there any method of restricting costs to remain in same business area and not getting translated to another business area.
Example :                    cost center           profit center           business area
expenses                      1011                   1001                     101
allocation from cctr to cctr 1012 which is having pctr 1002 and business area 102
expenses                      1012                   1002                       102
So my requirement is the system should not update business area 102
Thanks and regards
vijay

Hi Vijay,
Profit Center is derived basing on Assignments. If you have assigned a Profit Center in the Cost Center Master
Data, obviously for whatever the postings that take place in that Cost Center, will be posted to Profit Center also
(Statistical).
In your case, Cost Center 1011 and 1012 have been assigned to different Profit Centers 1001 and 1002. So,
conceptually what the system is doing is correct.
You want to restrict the postings to happen to Business Areas. I suggest you, this is not problem of
stopping/restricting the transaction postings but You have to restructre your Cost Centers and Profit Centers.
It's rather a Business Process / Structure change required than technical requirement in the system by restricting
the postings.
Pls revert back for further discussion...
Srikanth Munnaluri

Material Document not getting posted.

Hi Guys:
Material document is not getting created when i try post the inventory difference using transaction LI21 ( Clearing of differences in Inventory Management ).
we are using WM , so physical inventory is carried out at Bin Level.
Did I miss anything in the config setting?
Thanks
Sweth.

Hi Jurgen:
do you have a pick or putaway quantity in this quant in storage type 999 ?
Yes , in the available quantity I could see the -ve quant ( Goods Issue/Pick) and + Quant (Goods Receipt/Putaway)
is the quant locked?
Quant is showing with unlocked logo.
is somebody else in change mode in that quant?
Nope
is this the only item in your inventory document?
yes
have you tried to execute LI21 in background?
I don't how to do that ,
do you require to enter a reason for the difference?
I didn't see that question Popped Up.
Thanks for the help.
Sweth

Requirement: Insp lot of self Certified material should not get skipped

Similar Messages

Maybe you are looking for