Requisition Document type from PM Order

Hi:
WE implemented SAP PM for our Canadian company. In configuration of external procurement through PM order, we specified to have requisition document type u201CZSERu201D to be created.
So for the plants in Canadian company code when PM orders are created (IW31) and if there is an external service is required, System creates ZSER requisition type.
WE are implementing PM for our US Company where we want to have a different requisition document to be created PM order. The requisition document type ZNB should be created for the 3 plants in US Company. How can we control this??
Is this possible??

Hi,
  You should be able to accomplish this through the user exit
     COZF0001 Maintenance order: Change purchase requisition for external operation
     COZF0002 Maintenance order: Change purchase requisition for external component
  Based on the order header information you can assign a Different PR type(BSART) from what has been specified in config. However be-aware that if collective purchase requisition is active all the PR for the Order should be of same PR type.
Regards
Narasimhan

Similar Messages

  • Retrive document types from BKPF / BSEG

    Hi guys,
    I need to extract records with the following document types from BKPF
    - RE (Invoice Gross with PO)           
    - RA (Sub.cred.memo stlmt with PO)
    - KR (Vendor Invoice without PO)          
    - KG (Vendor credit memo without PO)      
    - ER (E-Payment)                    
    - TE (Travel & expense)               
    - KD (Down payment)               
    and then for these records the BSEG entries with these posting keys
    - 31 (link to Payment via clearing document)
    - 40 (debit entry, for non-PO voucher)                    
    - 50 (credit entry, for non-PO voucher)                    
    - 86 (GR/IR Debit, link to PO Line, positive)                
    - 96 (GR/IR Credit, link to PO Line, negative)                
    Extractor 0fi_gl_4 does not provide me wtih all these doc types, only a subset.
    0fi_ap_4 is not an option for me, because in the data warehouse I need to link the bkpf/bseg records to the PO (ekko/ekpo), while we have no po reference in bsik/bsik that are read by 0fi_ap_4.
    Is there a way to extend the fi_gl_4 so it contains the doc types I need?
    Or do you know another way of retrieving bseg records of specific types?
    Regards,
    Arjen

    ok,
    I have checked again and if you didn't change the business content, both fields BLART (doctype) and BSCHL (key) are extracted; how was your delta init done? with selections? Did you apply some specific TRules or URules? Check you PSA for a record you are missing and simulate the update in order to see what's going on.
    As I said, I got everything in my ODS.
    you can also check this in R/3; Tx RSA3 with a comp_code and a fiscal period selection...
    hope this helps
    Olivier.
    Message was edited by:
            Olivier Cora

  • MRP-Exclude STO document type from MRP Run

    Hi,
    I want to exclude STO document type from MRP run, so that STO Open qty will not be considered as open qty while  doing MRP.
    I have checked below settings but didn't worked.
    1. In OMI8 - I have unchecked "Stock in Transfer"
    2. SPRO->Materials Management->Consumption-based Planning->Planning->Define torage Location MRP per plant
         Here I have excluded ONE storage location from MRP and same storage location has been used in the STO.
    Can anyone know how to resolve this ?
    Regards,
    Rakesh

    Rakesh,
    Yes, they will not be relevant for MRP.  Neither will anything else in that storage location.  However, the setting is not in configuration, but in the material master (MRP4 tab).
    The configuration setting you mentioned has no impact on existing material masters, it is only used to determine the default settings for newly created storage location entries for a material/plant..
    You can set a particular material/plant/stlocn to be irrelevant for MRP.  This relevancy is irrespective of document type, it can be a STO, a purchase req, a sales order,  a production order, or it could be stock (inventory)  - all supply and demand in this material/plant/stlocn are excluded from MRP processing.
    MRP relevancy of storage location is set at the material/plant/storage location level in the material master.
    If you do not wish to exclude a storage location from MRP, then you will have to find another way to make your STOs Irrelevant for MRP.  As I said earlier, STOs (like any other Purchase orders that are configured to process stock ), are generally considered to be relevant for MRP.    
    If you were a client, I would suggest that you rethink your business model that drives this requirement.   
    If the business model cannot be altered, and the storage location solution is unacceptable, then you will be stuck with a customized solution.
    Best Regards,
    DB49

  • Default document currency as per document type for sales order

    Dear All,
    We are facing problem in Default document currency as per document type for sales order,
    Our requirement is not to give currency in customer master & set it as default document currency as per document type,
    for example: Document type 'OR' default currency 'INR',
                         Document type 'ZEU' default currency 'EUR',
                         Document type 'ZUS' default currency 'USD',
                         Document type 'ZNP' default currency 'NRP,'
                         Document type 'ZAF' default currency 'RAND,'
    Is it any how possible in standard setting ?,
    Regards,
    Sai

    Hi,
    The system proposes the sales document currency from the customer master record of the sold-to party. You can change the currency manually in the document or change in currency in customer master. If you change the currency, the system recalculates prices for the entire document.
    to determine different currrency in sales docuement you need to write an user exit and then overwrite the docuement currency copied from customer master. Try user exit 'USEREXIT_MOVE_FIELD_TO_VBAK' under include MV45AFZZ for this change.
    with regards
    vivek.

  • Multiple purchse requisition document types

    Hi,
    Can we generate purchase requisitions under networrks, for external procurement, by assigning multiple purchase requisition document types in configuration? If answer is yes, how?
    Could any one throw some light and suggest?
    With regards,
    Prabhakar.

    hi prabhakar,
    in config you can only assign one PR doc type to order category .. for having multiply doc type based on network type u can use the below exits ..
    COZF0001 Change purchase req. for externally processed operation
    COZF0002 Change purchase req. for externally procured component
    regards
    pushpa

  • Purchase requisition document type change after Enhancement pack 4

    HI,
    we have recently upgraded to enhancement pack 4, after which i am not able to change purchase requisition document type.
    In change mode ME52N, the system is allowing to make change but when i goback and display the same PR again the change is not visible in change history also.
    I am able to make other changes. facing the problem with change in document type only.
    Regards,
    Raghu

    Hi,
    One thing please note that once you select the document type and draft the PR and save the PR, you will  get the doc number.
    Once you get the document number you cannot change the PR document type .
    The reason is document type is linked with number range so it cannot be changed because different seriers of document number is assined to differentdocument type. 
    And moreover document type is linked with the screen settings also. So I would request you to check the settings for each doc. type

  • Change Purchase Requisition Document Type when item category is D

    Hi experts,
    i have problem, when i put servis number in to the servis line i havent change Purchase Requisition Document Type. Account
    Assignment Category is K and Item Category is D. It is standard of Purchase Requisition? When i set that i can change document type when item category is D.
    When i putting only material i can change Purchase Requisition Document.
    Thx for your answer.
    Laco

    Hi,
    One thing please note that once you select the document type and draft the PR and save the PR, you will  get the doc number.
    Once you get the document number you cannot change the PR document type .
    The reason is document type is linked with number range so it cannot be changed because different seriers of document number is assined to differentdocument type. 
    And moreover document type is linked with the screen settings also. So I would request you to check the settings for each doc. type

  • MRP and purchase requisition document type.

    Hi
    where can I set the purchase requisition document type for
    MRP?
    MRP generates purchase requisitions using document type NB instead of
    a custom document  type.
    <b>How can I set the system so that generates purchase requisitions with
    a custom document type?</b>
    Best regards

    hi,
    in Tranasction : OPPQ, you can assingn the user defined document type.
    here standard is NB. There you can change the doucment type to ZNB like.
    hope this may help you,
    Regards,
    Srinivas

  • Change Settlement document Type on PM orders

    HI guys,
    I need change settlement document type on PM orders.
    I've already created new document type and a new range number on [OBA7], and I've already assigned this new document type to my settlement profile [.
    But system still used the Document type 'SA'.
    Any ideia for solving this problem.
    Thks,
    Helena

    HI,
    If you have newGL document splitting active and have not fixed it yet, then check this thread for the solution..
    Change document type in Maintenance orders settlement (KO88)
    Hope this helps.

  • Flowing of the Condition  type from Sales Order to invoice

    Dear All,
    I'm facing a problme in the copying the condition types from Sales order to Invoice.
    The details are as mentioed below:
    I have a Condition type CONC and made the Copy of the Condition typs as ZDIS.So that CONC's value will be debited and ZDIS' value will be credited in the FI..
    But ALL the condition types which i have mentioed including tax and discounts condition types are copying from Sales order to invoice.Except CONC.
    I have checked all the copy controls,i'm sure those are OK.Bcoz other condition types are working perfectly fine.
    What could be the reason for this???
    Will be any setting for on condition type level for copy controls???
    Please Guide me its URGENT.
    Thanks
    Vinay

    hi
    from which condition type u have copied this CONC , can u pl elaborate more on this.
    and just write what is exact scenario and whats going wrong?
    in copy controls check for pricing source and pricing type.
    regards
    mandar

  • Purchase requisition document type

    Hi,
    Could any body guide me on how to control the assignment of  Purchase requisition document type in project system.
    The system has been taking default NB for network 20 and I want system to assign document type based on plant.
    What is required to be done???
    Regards,
    Pradeep

    Hi Pankaj,
    What if we copy netword 20 and assign the copied network a different document type??
    If we do so, how that new network 20 copy settings will have to be taken care of, in term of its dependencies??
    Please suggest??
    Regards,
    Pradeep

  • Define new document type for purchase order

    Hello
    I want to create a new document type for purchase ordre with also new number range.
    And within my conditions, the shopping card will be generate either document type ECPO with number range 44 or document type ZOS with number range 33.
    The document type is still a purchase order.
    Is it possible to do that? To assign new document type for purcharse order?
    If yes, is there any Badi to put my conditions of generation of my document type?
    Thank you for your help.
    Regards,
    Peggy

    Hi Markus
    Thank you four your response. Unfortuntly, i do not want to create a new transaction type.
    It is still a purchase order which could be visibled in standard transaction. The behaviour is still like standard PO, and could be visible in standard transaction PO.
    I just want to create 2 types of purchases orders to identify them, so create a new number range and so a new document type for purchase order..
    I have a condition to do "the shopping card will be created in this document type, and this schopping card will be created in this document type".
    But standard document type is ECPO, and I don't really know if it is possible to create new document type for purchase order...
    Peggy.

  • Create different billing document types from same sales order type

    Hello,
    Please take a common document flow, just  like this one:
    - Sales Order (type ZE01 )
    - Outbound Delivery
    - Billing Document ( ZA or ZB )
    The billing document is based on the outbound delivery. Here is the requirement that we need to implement:
    - We need to determine different billing document types ( ZA or ZB ) according to a custom determination, based on a Z table. In some cases the billing document will be type ZA, in other cases it will be type ZB. I've been told that I can achieve this  via copy control , but some extra help would be welcome.
    Any clues?
    Regards,
    Joã

    Hi João G Neves ,
    Were you able to achieve this requirement using a  user exit? if so could you let me know the name of the user exit? Basically in our current project a sales order can be billied using 6 different billing document types. The copy controls between the sales  document and billing document is been set up for all the 6different billing doc types and currently the users are manually selecting the billing document type in VF01 .The buisness insists on making this automated.They want the billing document type to be determined based on some custom condtions.
    Any inputs regarding this is highly appreciated.
    Thanks & Regards,
    Srini

  • In ME51N screen service requisition document type is not comming

    Hi gurus,
    Can anybody help me out ,In production server in me51n ie purchase requisition screen, where we used to select the different purchase requisition order types ,service order is not comming whereas in development server it is comming.In spro i have seen the settings ,in document type service order  item category is attached.
    Please help me its urgent.
    Thanks N Regards,
    Siddhartha Chatterjee

    if that document type is not even coming in the spro settings for the production server then i belive it has not been trasported to the production server and that means there has been some intentions to do that so its beeter to make sure that do u really need that document type or not if u need it then try to transport it from qc

  • Purchase requisition creation (STO) from Sales order

    Hi Gurus,
    Read the following scenario:
    Sales order is created with delivery plant A. No stock on plant A.
    Purchase requisition is created from plant B to plant A (intra-company flow or stock transfer order).
    Problem is that the purchase requisition needs a price. It is not logical because intra-company flow (stock transfer in same company flow) is like a stock transfer without purchasing. So in my mind, I don't have to maintain price.
    Also if I use ME27 to create manually STO between both plants, price is not asked.
    Other question is: is it possible to create directly a purchase order when sales order creation (and not purchase requisition, newt convert into PO)?
    Many thanks.
    Stéphane

    Hi Stéphane Vituret, Did you manage to find a solution for this. I have a similar problem as well.
    Please find the scenario below.
    Cusotmer places order of Mat-XX to Company A. The Company A creates PO to Company B. Company B delivers to Company A and then invoices Company A. Company A receives the goods into own stocks. Now the Company A delivers to the customer from its own stocks and then invoices Customer.
    I decide to go ahead with the Individual Purchase order solution and since the Company A is buying from Comapny B, I decided to integrate the Cross Company STO flow in the procurement part. Hence the flow in SAP is like;
    Cusotmer placese order to Company A
    Comapny A creates a Individual Purchase order type Sales order. So the Item category is TAB.
    This sales order generates a PR. PR is conveted into a CC_STO as thenvendor is Plant B in this case . Now this STO appears in the delivery due list of plant B.
    Now I genreate the delivery to move stocks from plant B(of co.cd B) to Plant A(of co.cd A).
    Here is the problem. I am not able to do PGI as the system checks for "sales order" stock at plant B and throws error
    "Sales order stock 36637 000010 does not exist". This should not be the case as the stocks should get attached to the sales order only when recieved into Plant A. Hence system should not check for "sales order stock" at plantB while trying to deliver from Plant B to Plant A.
    Lets take a normal IPO scenario.
    CusotmerA places order of Mat-A to Company A. This sales order generates a PR. The Company A converts the PR into a std.PO to external vendor. The PO from the sales order will have a account assignment "M- Ind. cust. w/o KD-CO". The stocks will be received into Plant with spl indicator "E" while GR (MIGO). Now the system ensures that this stock can only be delivered against the particular sales order. Thus the stock procured for the customerA is delivered to customerA and not consumed by anybody else. In this case there is only one delivery involved, in SAP, which is 601 mvmt type from the Plant A.
    However if the vendor becomes another Plant (Plant B) belonging to another company code then there are two deliveries involved in the SAP system one with mvmt type 643, from Plant B to Pant A, and the second with 601 from Plant A to the customer. Hence the system should check if the stocks are attached with a spl indicator only during the second delivery of 601 mvmt type. I am facing a problem because the system does it for the first delivery itself. If you know the answer please do let me know. I really appreciate it. Thanks a lot in advance.

Maybe you are looking for