Requisition Queue is not avialable

Hi Team,
Could you please provide the solution to resolve this issue?
I have installed Cisco Prime Service Catalog (version 10). And i have created one service to test CCP- CPO communication.
While ordering the service i am getting expection like "Requisition Queue is not available". And unable to order the service.
I have attached screen shot of queues which are available in Jboss. (Unable to change/create new queues).
Please let us know if any information required.
Regards,
Vignesh.

When you encounter this type of issues, it is best to contact TAC for assistance.
That said, a few troubleshooting tips:
Have you tried restarting Prime Service Catalog?  After it is back up and running, restart CPO.
Did you change your JMS password?  That could be the reason you fail to connect to JMS.
Is this an appliance installation?

Similar Messages

  • Business Engine Requisition Queue is not available

    Hello,
    did anyone encounter the error I wrote in the title?
    I went to http://<Ciaca server>:8080/RequestCenter/businessengine/configdebug.jsp to check the business engine config, every thing seems fine.
    I'm going to use a clone/Backup of the VM where CIAC is installed, but I'd still be interested in understanding that error.
    Thank you.

    Did you opened a TAC case? Maybe support can help?

  • Email gets queued, but not sent until I login to my account on the server.

    This is very strange. Let me explain.
    1. Snow Leopard Server 10.6.2 running on an iMac.
    2. I have the Mail Service running on the server. I can receive emails without problems.
    3. Using my Snow Leopard Server email account, I attempt to send an email to another account (e.g. a mac.com email account).
    4a. If I am actively logged into my Snow Leopard Server account *on the iMac* (e.g. via VNC, as long as my desktop is active), the email will arrive successfully. Here are the mail.log messages:
    postfix/smtpd\[69030]: connect from \[External Host Address]
    postfix/smtpd\[69030]: 942814AD55B: client=\[External Host Address], sasl_method=CRAM-MD5, sasl_username=MyUserName
    postfix/cleanup\[69037]: 942814AD55B: message-id=<[email protected]e. com>
    postfix/qmgr\[65313]: 942814AD55B: from=<[email protected]>, size=604, nrcpt=1 (queue active)
    postfix/smtpd\[69040]: connect from localhost\[127.0.0.1]
    postfix/smtpd\[69040]: C611B4AD568: client=localhost\[127.0.0.1]
    postfix/cleanup\[69037]: C611B4AD568: message-id=<[email protected]e. com>
    postfix/smtpd\[69040]: disconnect from localhost\[127.0.0.1]
    postfix/qmgr\[65313]: C611B4AD568: from=<[email protected]>, size=1043, nrcpt=1 (queue active)
    postfix/smtp\[69038]: 942814AD55B: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1]:10024, delay=0.25, delays=0.1/0.01/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as C611B4AD568)
    postfix/qmgr\[65313]: 942814AD55B: removed
    postfix/smtp\[69042]: C611B4AD568: to=<[email protected]>, relay=smtp-mx005.mac.com\[17.148.17.5]:25, delay=0.48, delays=0/0.1/0.14/0.23, dsn=2.5.0, status=sent (250 2.5.0 Ok, envelope id [email protected])
    postfix/qmgr\[65313]: C611B4AD568: removed
    4b. If, however, my Snow Leopard Server account is either logged out, or even just "fast user switched" to the Login Window, the email gets queued, but not sent to the external email address. I get the following four messages in the mail.log file:
    postfix/smtpd\[69030]: connect from \[External Host Address]
    postfix/smtpd\[69030]: B5F574AD582: client=\[External Host Address], sasl_method=CRAM-MD5, sasl_username=MyUserName
    postfix/cleanup\[69037]: B5F574AD582: message-id=<[email protected]e. com>
    postfix/qmgr\[65313]: B5F574AD582: from=<[email protected]>, size=604, nrcpt=1 (queue active)
    4c. The instant I login to my machine at home (e.g. via VNC), the email finishes processing. The below messages are logged, and my external email account receives the email:
    postfix/smtpd\[69160]: connect from localhost\[127.0.0.1]
    postfix/smtpd\[69160]: 20B244AD5B0: client=localhost\[127.0.0.1]
    postfix/cleanup\[69037]: 20B244AD5B0: message-id=<[email protected]e. com>
    postfix/smtpd\[69160]: disconnect from localhost\[127.0.0.1]
    postfix/qmgr\[65313]: 20B244AD5B0: from=<[email protected]>, size=1043, nrcpt=1 (queue active)
    postfix/smtp\[69038]: B5F574AD582: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1]:10024, delay=74, delays=0.1/0/0/73, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as 20B244AD5B0)
    postfix/qmgr\[65313]: B5F574AD582: removed
    postfix/smtp\[69163]: 20B244AD5B0: to=<[email protected]>, relay=smtp-mx006.mac.com\[17.148.17.6]:25, delay=0.49, delays=0.09/0.01/0.15/0.25, dsn=2.5.0, status=sent (250 2.5.0 Ok, envelope id [email protected])
    postfix/qmgr\[65313]: 20B244AD5B0: removed
    I'm very much at a loss here. It's as if the act of logging out (or fast user switching to the Login Window) suspends some process that is required for my email to process. But .... why?
    Any ideas? Any additional information I can provide to help figure this out? Fwiw, I used to run Tiger Server (never tried Leopard Server) and never had this problem.
    Rob

    Looks to me like the anti-virus scanner, amavis. The clue is the line:
    postfix/smtp[69038]: 942814AD55B: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1\]:10024, delay=0.25, delays=0.1/0.01/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as C611B4AD568)
    where the 10024 is the default port that Amavis runs on. Postfix is configured to pass mail through this port, and queues the mail until Amavis is available.
    My guess, therefore, is that Amavis is set to run under your account rather than under the system, which is why it only runs when you're logged in. Off hand I have no idea how you managed this and that makes it hard to work out how to fix it. I'd start by looking for org.amavis.amavisd.plist in /System/Library/LaunchDaemons, /Library/LaunchDaemons and ~/Library/LaunchDaemons (it should be in the former, but if its in the latter that could explain it.

  • DAC Task are queued but not running

    Hi Everybody,
    Currently we are running the ETL for only Financials and there are 394 tasks in total out of which 285 have been completed successfully. At times some of the tasks would just get stuck on particular action. For e.g The analyze task after dimension population would remain in the queued status and would never switch to run mode. So we had to abort the ETL and restart it. This action resulted in successful completion of the previously queued task. Now for past two days the ETL is once again stuck (queued but not running).
    For e.g The following task is showing status of running
    51     SIL_InventoryProductDimension_SCDUpdate     Running     2009-03-02 21:09:59.0                    DataWarehouse     DataWarehouse     SILOS          Update Slowly Changing Dimension     Informatica     0     0     -2     CUST R11 5 10
    But if I right click on the details
    I get this
    1     SIL_InventoryProductDimension_SCDUpdate_Full     Running     2009-03-02 17:40:41.0     2009-03-02 21:09:09.0     3 hour(s), 28 min(s), 28 sec(s)     Verifying if workflow still running on Informatica Server 'Oracle_BI_DW_Server'.
    If still running will attach to the workflow.     DataWarehouse     Informatica     0          -2     0
    And the remaining detail tasks for this are in queued status.
    What could be the reason?
    Does it need the Infomartica workflow manager open? It is open currently open but must have been accidently closed in between.
    Informatica services have always been running.
    Thank you very much
    Nilesh
    [excel dashboard|http://www.exceldashboard.org]
    dashboard Software
    [Access Dashboard|http://www.accessdashboards.com]
    [Dashboard Reporting|http://www.reportingdashboard.com]
    Edited by: njethwa on Jan 6, 2010 5:39 PM

    Hi
    This Sometime happens with DAC.We faced the same issue and had an SR open with Siebel for almost 2 weeks,they Couldnt help us out.
    Restart your DAC Server and Do a Dryrun and then run your full ETL .
    The Analyze task would not hang anymore.
    I dot have any logical reason why this happens,but i am guessing it has to do with some java heap memory.So restarting the Server would free up the memory.(i am guessing but not sure).
    But it Works.
    Try it
    Let me know if this helps
    Thanks
    H

  • Thread pool throws reject exceptions even though the queue is not full

    Hi. I am using org.springframework.scheduling.concurrent.ThreadPo olTaskExecutor which is based on java
    java.util.concurrent.ThreadPoolExecutor
    with a enviornment under load.
    I see on some cases, that this thread pool throws tasks with reject exception
    even though the queue size is 0.
    According to the documentation, this thread pool should increase the pool size to core size and then wait untill all queue is full to create new threads.
    this is not what happends. for some reason the queue is not filled but exceptions are thrown.
    Any ideas why this can happen?

    This is the stack trace:
    taskExecutorStats-1 2010-04-27 11:01:43,324 ERROR [com.expand.expandview.infrastructure.task_executor] TaskExecutorController: RejectedExecutionException exception in thread: 18790970, failed on thread pool: [email protected]544f07, to run logic: com.expand.expandview.infrastructure.logics.DispatchLogicsProviderLogic
    org.springframework.core.task.TaskRejectedException: Executor [java.util.concurrent.ThreadPoolExecutor@dd9007] did not accept task: com.expand.expandview.infrastructure.task_executor.TaskExecuterController$1@141f728; nested exception is java.util.concurrent.RejectedExecutionException
         at org.springframework.scheduling.concurrent.ThreadPoolTaskExecutor.execute(ThreadPoolTaskExecutor.java:305)
         at com.expand.expandview.infrastructure.task_executor.TaskExecuterController.operate(TaskExecuterController.java:68)
         at com.expand.expandview.infrastructure.proxies.DataProxy.callLogic(DataProxy.java:131)
         at com.expand.expandview.infrastructure.proxies.DataProxy.operate(DataProxy.java:109)
         at com.expand.expandview.infrastructure.logics.AbstractLogic.operate(AbstractLogic.java:455)
         at com.expand.expandview.server.app.logics.stats.StatsPersisterSingleChunkLogic.persistSlots(StatsPersisterSingleChunkLogic.java:362)
         at com.expand.expandview.server.app.logics.stats.StatsPersisterSingleChunkLogic.doLogic(StatsPersisterSingleChunkLogic.java:132)
         at com.expand.expandview.infrastructure.logics.AbstractLogic.execute(AbstractLogic.java:98)
         at com.expand.expandview.server.app.logics.ApplicationLogic.execute(ApplicationLogic.java:79)
         at com.expand.expandview.infrastructure.task_executor.TaskExecuterControllerDirect.operate(TaskExecuterControllerDirect.java:33)
         at com.expand.expandview.infrastructure.proxies.LogicProxy.service(LogicProxy.java:62)
         at com.expand.expandview.infrastructure.logics.AbstractLogic.service(AbstractLogic.java:477)
         at com.expand.expandview.server.app.logics.stats.StatsPersisterLogic.persist(StatsPersisterLogic.java:48)
         at com.expand.expandview.server.app.logics.stats.StatsPersisterLogic.doLogic(StatsPersisterLogic.java:19)
         at com.expand.expandview.infrastructure.logics.AbstractLogic.execute(AbstractLogic.java:98)
         at com.expand.expandview.server.app.logics.ApplicationLogic.execute(ApplicationLogic.java:79)
         at com.expand.expandview.infrastructure.task_executor.TaskExecuterController$1.run(TaskExecuterController.java:80)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: java.util.concurrent.RejectedExecutionException
         at java.util.concurrent.ThreadPoolExecutor$AbortPolicy.rejectedExecution(ThreadPoolExecutor.java:1760)
         at java.util.concurrent.ThreadPoolExecutor.reject(ThreadPoolExecutor.java:767)
         at java.util.concurrent.ThreadPoolExecutor.execute(ThreadPoolExecutor.java:658)
         at org.springframework.scheduling.concurrent.ThreadPoolTaskExecutor.execute(ThreadPoolTaskExecutor.java:302)
         ... 19 more

  • Disp+work,queue info not found

    i'm working on erp 2004,64 bit MSSQL,after kernel update.............disp+work connetced,queue info not found.....
    can any help in this
    thanki n advance
    kris

    Hello krishna,
    Have you investigated the developer trace files. Please post the contents
    dev_w0,dev_disp for further investigation.
    You can also try out by restarting all the services and sap systems once again.
    Regards,
    Jafer

  • Display Purchase requisitions that is not approved.

    Hai all!
      i want to display all Purchase requisitions that is not approved, ie. status IN RELEASE should be get display..
    so plz give me some sample code 4 achieving this..
    the final report should contain PR number, item of requisition, material, and status ..

    Hi Friend,
    Please check FRGKZ field of EBAN table, if the value is not equal to B, it is not released.
    Regards
    Krishnendu

  • Requisition users are not belonging to any purchasing organization

    hi friends,
    im using oracle 11i. as per our organization policy, requisition users should be able to make Receipts (for expense items only, not any inventory items) i.e. they will do receiving transactions. they are already assigned with Receiving responsibility . but when anyone clicks on Receipt the Select Organization Window is not appearing which normally appears to inventory users. and as a result Requisition users are not being able to find any PO to make receiving transactions.
    requisition users are not belonging to any purchasing organization. pls help me how to make Select Organization Window available to those users.
    Thanks,
    LISAN

    Hi Lesan,
    You need to revisit "Receiving responsibility", check what are the menu and function excluded from the Responsibility and what is the main menu attached to this responsibility (e.g : Purchasing Receiver GUI)...
    the best practice will be in your Receiving Responsibility, *1) Attach Menu : Purchasing Receiver GUI 2) Remove all entries for menu exclusions.. Save it.. Assign this responsibility to yourself.. Now try to receive.. I am sure now system will prompt you for an organization :)*
    Please test and confirm..
    Regards,
    S.P DASH

  • SAP HANA D3 Library errors - "queue" is not a function

    Hello all,
    i have a question regarding D3 Integration into SAP HANA and hope one can help me.
    The last days i developed a D3 Choropleth (spatial data) with hover effects, tooltips and a legend. I have an existing SAPUI5 and HANA XS application running and now i wanted to integrate my D3 Choropleth.
    1 ) First of all, i added the following tags into the head section of the index.html file of my SAPUI5 project as i need those libaries.
    <script type="text/javascript" src="http://d3js.org/d3.v3.min.js"></script>
    <script type="text/javascript" src="http://d3js.org/queue.v1.min.js"></script>
    <script type="text/javascript" src="http://d3js.org/topojson.v1.min.js"></script>
    2) Then, i added the program code of my D3 Choropleth into the view.js of my SAPUI5 project:
    var html2 = new sap.ui.core.HTML("d3choropleth", {
                    content: "<div class='D3Choropleth'>" + "</div>",
                    preferDOM: false,
                    afterRendering: function() {
                                  .... here is my code ...
    I have a SAPUI5 shell with different NavigationItems (tabs) and for this D3 Choropleth tab i am writing:
    case "WI_choropleth":
    oShell.setContent(html2);
    break;
    When i start my SAPUI5 project and klick on the tab where the D3 Choropleth should be rendered, i get the following errors:
    d3.scale.threshold is not a function
    d3.geo.albers center is not a function
    queue is not a function
    Moreover, i have to say that my D3 Choropleth works standalone outside HANA very well, that is why i assume it is a library integration issue.
    In my browsers (firefox) developer console i can see that there is a D3 library loaded by default (as it is one of SAPUI5s components) with the path: sap/ui5/1/resources/sap/ui/thirdparty/D3.js.
    BUT this is a really old version of D3 (2.9), the current release is D3 (3.4), so maybe the problem is that the D3 libary that is loaded by default overwrites my integration of D3 (script tag above)?
    Does anyone have the same issues and knows how to solve that? Furthermore it seems that the d3 queue library is also not integrated as the error "queue is not a function" occurs and i also ask me how to solve that error.
    We have SAP HANA Developer Edition Revision 80 (by AWS), HANA Studio and Client are on revision 73 (64bit).
    It would be great if anyone could help me with my issue.
    Further question: Is the current release of D3 going to be integrated into the next HANA revision?
    Thanks a lot & regards,
    Andreas

    Hi Andreas,
    You are right. The way you integrate the libraries in your code is not the way that will work for HANA XS projects. This is why it doesn't accept the queue function (library is not loaded) and also why the 3.x only D3JS funcitons are not accepted (only the internal D3JS library is loading and these functions were not a part of 2.9 yet).
    To integrate third party libraries, you need to add XSJSLIB files to your project. These need to pass the server-side JSLint checks before accepted by the XS engine. (Client-side checks that fail might not count though).
    Please see this post from David Brookler for more information.
    http://scn.sap.com/community/developer-center/hana/blog/2013/12/23/db001-using-libraries-in-xs
    Best regards,
    Tobias

  • Msmq private queue is not visible on windows 2008 r2

    Hello
    MSMQ privte queue are disappeared from the console. when i try to create a new queue with same name it says that entry is already there.
    I am able to see the msmq status on the event viewer ,we use vcs cluster
    is it some permission issue and or it configuration mismatch on the vcs cluster
    Regards

    Hi,
    Please see if this is the issue. Try the workaround provided by this KB:
    Some private queues may not appear or may disappear when you update the view in the Computer Management window
    http://support.microsoft.com/kb/839928/en-us
    And here is an article about the issue:
    "Where have my MSMQ messages gone?"
    http://blogs.msdn.com/b/johnbreakwell/archive/2010/01/22/why-does-msmq-keep-losing-my-messages.aspx?Redirected=true
    If you have any feedback on our support, please send to [email protected]

  • SMOHQUEUE: Starting queue demon not successful

    Hi
    I am performing the configuring settings in CRM and ECC. I am facing few problems, could you please help me overcoming these challenges:
    1. In CRM, when i tried to Start Queue Demon in txn code: SMOHQUEUE, I am facing the following error:
    "Starting queue demon not successful. Error during aRFC (SAPCRM_MW_RR_000:Error during the retrieval of the logon data store)".
    2. In ECC, in SMQ1, if i double click on R3AD_BUPA48, it shows:
    Destination: vqdisu_QAE_30 (Destination should be CRM but showing ECC - where can i change the Destination)
    Status: SYSFAIL
    Logical system changed, see SAP Note 588701
    How can i overcome these problems.
    Thanks

    Hi,
    For issue # 1 : Maintain a destination SAPCRM_MW_RR_000 in transaction SM59 according to note 305881.
    For # 2 : This error may occur post client copy if somehow BDLS was not run properly. If you see an entry in CRMPRLS in ECC and CRMMLSGUID in CRM and they're fine, the issue might still be there. So delete CRMPRLS on ECC, reset the queue and execute.
    A new entry in CRMPRLS would be populated automatically.
    Tnx.

  • CIF queues - Lock not possible error in application log

    hi,
    Below is the application error log from SLG1
    Looks when R3 is sent CIF queue, could not be processed at APO, due to lock not possible. It looks, the object is already locked.
    This happens only certain hours only. We searched in batch jobs etc across landscape, but no luck.
    We are currently checking, if this could be due to some issues with LiveCache processing.
    Any input would be helpful.
    SLG1 - Application log errror:
    Source system: sapapp80 user: R3CIFRFC transaction: function module: /SAPAPO/CIF_CLAF_INB
    Access block: data from system CLAF updated again
    Lock not possible for charc at FM claf_inb:000000000100020361G21C02244Z
    Object is locked at present
    Thanks,
    RajkS

    Hi Raj,
    Pls check the table CIF_IMOD details in R3 System,if 2 IM running with the same object we use to get these kind of
    locking issue.
    also check the workprocesses details during those time. whether you have enough space to process the reqd the
    t-data.
    Regards
    DPS

  • Queue  does not exist Error while saving TO

    We enabled RF Queue determination
    Queues are getting determined correctly in Transfer orders as per the logic mentioned in 'Assign Areas and Activities to Queues'
    We dont want queue determination for few TO's if logic is not there and ststem should not assign queue but now system is prompting message 'Queue  does not exist, Message no. LRFMON502' if it could not derive queue while saving TO
    Any pointers?

    Hi
    We enabled queue determination based on detination storage type with BADI LE_WM_RF_QUEUE, this implementation cuased us DUMP
    Fixed by fine tuning queue assignment in config

  • Print queue does not work

    Since the update I did from Tiger to Leopard the Print Queue does not work. When I print a document the printer starts to jump up and down on the Dock for more than 5 minutes. Printing finishes and the icon of the printer is still "dancing" on the Dock. If I try to open Print Queue the window does not open immediately but after a long time and I can't see the printing documents that are waiting in the queue. As a result I can't stop or pause or delete a printing document. The same thing happens if I try to open Print Queue from the Print & Fax Preferences' window. The window opens after a long delay and nothing can't be controlled from this window. I forgot to say that the printer icon remains on the Dock and Force Quit is the only option I have when trying to quit it.
    I have tried Permissions Repair. Nothing happened. I installed the latest driver. The problem is still there. Only after Reseting Printing System the problem is fixed but until the first reboot. If I restart the computer then the problem appears again and the only thing I can do is to Reset again the Printing System. So, if I want to control the printing procedure, I have to Reset Printing System after every restart!!! Any help???
    P.S. I have a Canon iP4500 but I don't think that the printer is the problem because with Tiger I had never face this problem and I have also printed with this printer from a MacBook running Leopard with no problems.

    1) I tried Print Therapy and after I had repaired Permissions the problem was solved (some permission problems were found) until the next restart.
    2) Then I tried to stop and start again the cupsd process and again the problem was solved until the next restart of the computer.
    3) Then I replaced the cupsd.conf file with a new one but the app asked to restart the computer and after this the problem was back.
    4) Print Therapy does not find any problems neither in the properties of the root user nor in the current user or any other group.
    5) Also the verification of the temporary files find no problems.
    In conclusion I think that the problem lies in the cupsd process because when stopped and restarted (we can forget that by Repairing Permissions actually we restart cupsd) I have no problem until the next restart of the computer.

  • QUEUE IS NOT EMPTY ---

    Hi people,
    I am upgrading the system by raising the respective patches, but will not let me update as I get an error check requeriments and the message is "QUEUE IS NOT EMPTY".How can I fix it?
    Thank you very much

    Hi Sergio....
    Sometimes, restarting the process work....
    Here, you can find more information about the Support Package Manager
    http://help.sap.com/saphelp_nw04/helpdata/en/3d/ad5d044ebc11d182bf0000e829fbfe/frameset.htm
    Check the link Troubleshooting, when the icon is red, something is wrong.
    I will copy and paste, the info of the Troubleshooting-> Errors during the Support Package Manager Phases
    =====================================
    CHECK_REQUIREMENTS
    This phase checks various requirements for importing a Support Package. It may terminate for the following reasons:
    ○       QUEUE_NOT_EMPTY: The tp buffer contains incompletely processed OCS requests. Use the following tp command to display these requests:
         tp SHOWBUFFER <SID> -D SOURCESYSTEMS= TAG=SPAM
    You can only continue to import the queue after these requests have been completely processed, or deleted from the tp buffer.
    =======================================
    Check also the links
    Troubleshooting -> Reseting the status
    and
    Troubleshooting -> Deleting the queue
    Hope it helps....

Maybe you are looking for