Reset my laptop now I can't get past this black screen with text?

I tweeted toshiba telling them my problem on Twitter (about how it would let me log in but it wouldn't take me to the desktop, it would just keep loading for hours til I would turn the computer on again to try and use my laptop) then direct messaged the @toshibausahelp and asked them if I should just reset my laptop and asked if it would then work. The person messaged me back and told me to reset my computer so by pressing f8 at the toshiba logo at the start up it took me to the options to reset my laptop. Then it took like 2 hours to reset and then my screen literally says "reboot and select proper boot device or insert boot media in selected boot device and press a key" idk what to do? That's the only place it'll take me to, any key I press won't effect it. Everything is gone which I knew it would be, but I thought resetting it would give me a fresh start to try again. But I can't even try, it won't let me go anywhere else can someone help me. I got this laptop in June and it's had so many problems. It's a satellite c55-b5202
Attachments:
image.jpg ‏2048 KB

Aftre the reset you need to configure correctly your router. Using Cisco Connect is the more easy way because it try automatically to sense the type of connection without asking to the user/operator. If you don't have Cisco Connect you have to configure manually using the web interface (http://192.168.1.1) but you need to know the right parameters for your ISP (and they depends only from your ISP, not from the router). You can try also to ark the customer support for your ISP or find another user with same provider and use similar parameters.
You can also try to re-download Cisco Connect software from here:
http://downloads.linksysbycisco.com/downloads/utility/1224662063213/CiscoConnect.E2000.1.3.11006.1.e...
Of course you can connect your computer directly to modem for the download, then reconnect router between you and your modem. Better to connect router to you computer with cable, not wireless for first configuration.
Ciao
Roberto

Similar Messages

My MacBook Air can't get past the gray screen with the apple logo. What's the fix?

My MacBook Air can't get past the gray screen with the Apple logo, so I can't login. Does anyone know the fix for this?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, reboot as usual (i.e., not in safe mode.) If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

On my iPhone 4, I cannot get the "not enough storage on iCloud" message to close. Therefore, I can't get past this box/screen AND I can't turn the device off. Please help.

On my iPhone 4, I cannot get the "not enough storage on iCloud" message to close. Therefore, I can't get past this box/screen AND I can't turn the device off. Please help.

Try resetting it by holding the power and home buttons at the same time until you see the Apple logo, then releasing. You won't lose any data by doing this.

I ttunes wants to keep on restoring my phone and I restored a few time now but can not get past the restore screen to load my purchaseed apps etc or sync my phone with new data, it sort of does not recognise the fact that i ihave synced already. Please he

I Tunes wants to conituiosly restore my phone and after every restore it just goes back to the restore screen and i can not get past that to get to my apps etc. It is as if the system does noet regognise the fact that the resotre has been done.................

Follow this very helpful user tip by wjosten:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Can't get past the blue screen with "starting Mac OS X"

I am having problems with starting my iMac. It gets to the blue screen with "starting Mac OS X" but won't go beyond that point. I was able to get the disc drive open with the help of other posts, holding down the mouse while turning on the computer, but the drive won't stay closed with the install disc in it. I have even tried holding down the "c" key while restarting the computer and it wouldn't work. Any help would be greatly appreciated. So much info that I could really use. Also, please keep in mind that I am not too computer savy. Simple language please.
Thanks

If the steps I provided in my earlier post are not helping, then I see your options at this point as follows:
1. Run the Apple Hardware Test (AHT) that came the affected computer. See my "Apple Hardware Test" FAQ for comprehensive advice on using the AHT in troubleshooting.
2. Performing an Archive and Install. For important tips on this, see my "General advice on performing an Archive and Install" FAQ. Perform the steps therein in the specified order.
3. Take the computer in for service. If there is an Apple Retail Store in your area, I'd recommend taking it there. You may wish to call ahead to make an appointment at the Genius Bar.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Can't get past the white screen with the grey apple in the middle

When I start up my PowerBook G4 I first get a gray screen with a small white box in the middle of the screen that contains planet earth. After this icon has flashed 14 times it disappears and then a small file appears in its place. Inside this file folder is an alternating flashing question mark and the Finder icon. After a few seconds this icon disappears and the screen turns white with an apple in the middle. I can not get the computer to do anything after that.
My problem is I got the computer from my mother and she can not find any of the disks that originally came with it.
Does anyone have any useful suggestions?
Thanks

Unfortunately, I just got off the phone with Apple Care and they do not carry them anymore. They're recommending I upgrade the system to Leopard. They want $120 for the disks. Any other suggestions?

HT1212 I have done the steps under the alternatively and it will does not restore and after a few minutes goes back to the page that the ipod is disabled page. Now how can I get past this?

Need help resetting ipod touch? I have followed all the directions and still it goes back to ipod is disabled connect to iTunes.

Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer

How can i get off of black screen with an apple on it?

Its been it like almost 5 hours!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings

My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings

Sammyhunter lets get you back in action! Has there been any physical/water damage to the device? Try pressing and holding the home and power button together. Once the Apple symbol appears release both buttons. Keep us posted!
AshleyS_VZW
Follow us on Twitter @VZWSupport

TS5376 I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions above and now I can't get past the Service 'Apple Mobile Divice failed to start. Help!!!

I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions to move the .dll's to the desktop, I removed iTunes via the control panel, and now I can't get past the Service 'Apple Mobile Divice failed to start. Verify that you have sufficent privilidges to start systems services. I now have no iTunes on my laptop, can't reinstall iTunes, and I am pulling my hair out because I can not figure out how to send an e-mail to Apple because I bought my iPad just over a year ago. PLEASE HELP!!!
V/r "TRACER"
CDR Harold W. "TRACER" Valentine, SC, USN

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

HT1349 Successfully loaded ios7 to iphone 4S from iTunes...now iphone asks me to agree to terms and privacy, then it locks up and won't accept my "agree." Goes in a loop and can't get past this screen. Pls help. thanks.

successfully loaded ios7 to iphone 4s.
now iphone asks me to agree to terms and privacy, then it locks up and won't accept my "agree."
goes in a loop and can't get past this screen. Pls help. thanks.

Have you tried resetting the device?
Hold down the home and lock buttons until you see an Apple Logo, then release the buttons.
If that doesn't work, you should check to see if you have a backup because you may have to restore your device.

Changed my exchange email on work computer (req. every 3 months), now I can't get past incorrect password error on iPad.

I'm required to change my exchange email password every 3 months on my work computer. Now I can't get past the incorrect email error on my iPad. It won't accept my new or old exchange password and won't let me get past the error to do anything else on my iPad. Hitting cancel doesn't help, the error just comes back a second later, so my iPad is useless for anything else and I can't get to Settings to either enter the new password for the account or delete and re-enter the account. Is there some kind of soft reset I can do? Any other suggestions?

I saw some other posts on the web and completely powered off of the iPad. Then turned it on again and was able to quickly go to Settings and update the password. So this is no longer an issue for me. Just a pain that this is what I'll have to do every three months when I have to change my exchange password again.

TS4268 I just downloaded the new iOS7 onto my iPhone 5 and now I can not get my iMessage to activate with my Apple ID! My iPad connected just fine but my iPhone won't. Please help

I just downloaded the new iOS7 onto my iPhone 5 and now I can not get my iMessage to activate with my Apple ID! My iPad connected just fine but my iPhone won't. Please help

I would go to Settings - General - Reset - and Reset Network Settings
Try it again after the phone restarts

HT1212 I took the passcode lock off of my iPhone 5 and now I can't get on to my iPad. It is asking for the passcode and when I use the one that was set up it locks me out. How can I get past this?

I have the iPhone 5 and with the new sofware update it added a passcode lock. Same for the iPad. I removed the passcode lock from my iPhone and now I can access my iPad. It is still asking for the four digit passcode. I tried using the one that was orgingally programed and it disables it every time. How can I get past this? I have tried to do a restore and it still takes me back to the lock screen. Please help!

Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times.

When making a photo book, my iPhoto freezes during uploading the book to the store after assembly. I have attempted this 4 times now and I don't know what to do! I know the file size is massive due quantity of large images. How can I get past this?

When making a photo book, my iPhoto freezes during uploading the book to the storey. I have attempted this 4 times now and I don't know what to do! I know the file size is massive due quantity of large image files, but I don't want to reduce the image file size and compromise quality in the book. How can I get past this?
My macbook air is os x 10.9, using iPhoto 11 9.5 (902.7).

Try Old Toad's solution here: See Re: iphoto : upload impossible to print a book
Try to boot into Safe Mode and order this way, or sign into a different user account and try to order as a different user.
Léonie

Reset my laptop now I can't get past this black screen with text?

Similar Messages

Maybe you are looking for