Resetting of FI document number during the same year

Hi,
Our permit for a computerized books of accounts using SAP has been issued by our Tax agency effective March 01, 2009.  Relative to this, we need to reset FI document number effective March 01, 2009.
Our problem is we already used up document number from January 01, 2009-up to present.  Is resetting possible for the same year?
Thanks for the help.

Hi,
SAP is not suggested these kind of activities, since it causes a inconsistancy in the database.
A document in the database will identified with a unique document number, company code, and fiscal year. This is the basic logic.
Eventhough there is a way to sort out this issue.
For Ex: We will discuss about document number range interval 02, which is assigned to document type SA.(I think your fiscal year starts from 01.01.2009)
in FBN1 transcation code, you will find the below intervals for the above said object.
Obj    Year        From No.                 To number        Current Number  
01     2007        1000000000     to     1999999999       1000007890
01     2008        1000000000     to     1999999999       1000005463
01     2009        1000000000     to     1999999999       1000004821
Here you have to change the current number for the all the above intervals to 0, and then delete all the above intervals.
Change current number---menu->interval->change numbermake 0 for the 02 object and save it and come back--again go to fbn1 and delete the objects
Again create a number range interval for the same object with different series, as shown below
Click on Add interval, and enter the following
01     2009      7000000000      to      7999999999           (Any Different Series of numbers)
save it and try to post the documents with document type SA.
Prerequisites for the above solution:
1) You need to complete all the transactions pertaining till the end of FEB with the old number series.
2) Close the posting Periods for the company code upto FEB
3) For all the number range objects use a new number series, which should not been used before for any other number range object.
I think this will helps you a lot.
Thanks,
Srinu

Similar Messages

  • 2 material document number having the same delivery number???

    hi
    is it possible to have 2 different material document numbers assigned to the same Outbound delivery number????
    the situation is that one of the material document number was assigned to a particular delivery number  say 'a'  and deleted later on a particular date.
    on the same date another material document number was created with  the same delivery number 'a'.
    is this possible to happen .(i.e functionally correct)   ?????? bcoz i am getting such type of output in transaction "MIGO"...
    PLZ HELP .POINTS WILL B AWARDED!!!

    Hi,
    Yes,it is possible.If you take example of partial delivery then say for example one delivery contains 10 items.Out of whixh I have delivered 4 yesterday and 6 today.This is done via creating transfer orders.Then two material documents will be created at time of PGI but they will refer to same delivery number.
    Reward points if useful
    Regards,
    Amrish Purohit
    Message was edited by:
            AMRISH PUROHIT

  • Why cant apple track my stolen iphone if it connects to the internet after reset. the IMEI number stays the same so i dont understand why they just dont shut it off and call me and the police to inform me about the whereabouts of the phone

    Hi, my iphone was stolen around a month ago. After the phone popped up on find my iphone in central london the police decided to be really helpful and instead going to get it they closed my case. Since then it has been offline because the "lovely" individual who stole it obviously reset it. I was just wondering why doesnt apple track phones through the IMEI number. The number stays the same, so if the phone connects to the network they should be able to know that its my stolen iphone. I just dont understand why they dont do that. They have a huge ecosystem, and if someone signs in to my iphone with their itunes account (which they pretty much have to in order to use most of the phones features) the IMEI number gets associated with that perticular account. Would it not be possible for them to realize that its my stolen phone?
    Thanks to anyone that answers.

    Your carrier can lock the IMEI number, try contacting them. At least you'll have the satifsaction of knowing the theif can't use it anymore. My guess is Apple doesn't block IMEI numbers because they don't want someone selling a phone without record, and then reporting it stolen and causing problems that way. But that's just a guess, I feel for ya. Good luck either way, if it's a locked phone you should be able to call the carrier it's locked to and have the IMEI blocked.

  • Different Migo posted on the same delivery note number with the same vendor

    Hi Experts,
    We are facing a peculiar problem while saving migo in the sytem. The system is allowing to post more than one migo with the same delvery note number with the same vendor code in the same financial year. Ideally shystem should give some informative / error messgage during saving one migo. In our company, we capture party invoice number in the delivery note option. Our problem is more promintent if the vendor is non excisable.
    How to check this problem.
    Regards
    GR

    Hi,
    In Standard SAP, no check is available on "Delivery Note" field for duplicacy. This is only available for "Reference" field in MIRO.
    If you want to have a check on "Delivery Note" field in MIGO then go for some ABAP Development using BAdi or Enhancement Spot "MB_MIGO_BADI".

  • SD document number to be same as FI document number

    Hi
    Is it possible to give the same SD document number as FI document number (Accounting document number). If possible please advise how can we configure that. At present due to error, some invoice were not posted to FI. In SD & FI the number is coming as sequence now. So there is a difference in document number.
    Anybody can help for the above URGENT issue ?
    Thanks…
    Joby

    Hi
    You cannot have two different documents with same number range. So they cannot have same document number
    Check the invoice not posted to FI and press release to accounting manually
    To avoid this in future, in the billing document maintain screen, check mark the option of automatic released to accounting
    Hope this helps
    Regards
    N Ganesh

  • Enter more than one personnel number for the same confirmation in CO11N

    More than one labor working on Machine work center simultaneously.
    So that during production orders confirmation in CO11N we need to enter more than one personnel number for the same confirmation but in CO11N the system allow me to enter only one personnel number.
    Note: I can not distinguish between the productions for each labor so that I can not enter separate confirmation for each labor.

    Hi,
    You can use the User Exit: CONFPP07  Single Screen Entry: Inclusion of User-Defined Subscreens
    for this purpose..
    Take help from the ABAPer for this enhancement..
    Regards,
    Siva

  • I am trying to get into my Game Center app but every time I tap on the app it opens too a blank white screen. I have tried several times to reset my phone but I get the same result.

    I am trying to get into my Game Center app but every time I tap on the app it opens too a blank white screen. I have tried several times to reset my phone but I get the same result.

    Hello there Sweebs44,
    It sounds like you are tapping the Game Center app to open it, but the screen is blank. I recommend signing out of your account:
    Go to Settings > Game Center, where you can:
    Sign out (tap your Apple ID)
    From: iPhone User Guide
              http://help.apple.com/iphone/7/#/iph6c493cac
    Then close all the running apps:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the phone sign back into your account and try again:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Hey, I'm trying to install Adobe Flash on my Macbook Air. At a certain point it asks for my password but it doesn't take it. So I cannot continue installment. I have reset my password already. Still the same problem. How can I continue to install when it

    Hey, I'm trying to install Adobe Flash on my Macbook Air. At a certain point it asks for my password but it doesn't take it. So I cannot continue installment. I have reset my password already. Still the same problem. How can I continue to install when it keeps asking for a password it doesn't recognize over and over again? How many times do I have to reset it then? Advice please

    You have to provide your computer's administrator password in order to install Flash Player.

  • Difference between local amount and document amount in the same currency

    Dear All,
    Why different between local amount and document amount with the same currency in some FI document line items? Both currency is 'TWD' and update currecy(BSEG-PSWSL) is 'USD'.
    What is the purpose of update currency(BSEG-PSWSL) and update amount(BSEG-PSWBT) ?
    Does update curreny cause the difference mentioned above?
    Thanks all in advance.
    Best regards,
    SAP user

    Dear Sir,
    Thanks for your kindly response!
    These fields of the FI document header are following:
    Local currency 1(BKPF-HWAER) : TWD
    Local currency 2(BKPF-HWAE2) : null
    Local currency 3(BKPF-HWAE3) : null
    Document currency (BKPF-WAERS) : TWD
    Transcation currency means which field ?
    Transaction code (BKPF-TCODE) : FB1S
    The line items as following :
    Itm PK Account    Account  short text   Amount
    1   40   21302500  A/E-Maintenance     1,119,350
    2   50   21302500  A/E-Maintenance     1,119,350-
    Amount in document currency is 1,119,350(TWD) but amount in local currency is 1,087,998(TWD).
    The line item's additional data :
    Amount for Updating in General Ledger : 33,894.02(USD)
    Thanks a lot !!
    Best regards,
    SAP user

  • Excise No. using  Accounting Document Number and the P.O. number

    Hi All ! In my GL report, I'm displaying the Accounting Document Number and the P.O. number.
    Now, the requirement is to display the excise no..
    Tried different tables in SE11 using J_1EXC for excise detials, but to no avail.
    And last which vendor to pick, Because vendors in P.O and BSEG differs.
    If I use the BSEG-BELNR I get a different vendor & If I use the P.O. no. in EKKO then also I get a different vendor.
    Please suggest.

    Hi,
    Actually the vendor in the accounting document and PO should match. If not look in table EKBE, It will have the accounting document or at least the invoice receipt against which accounting document would have been created. Check if the vendor number matches with the invoice receipt.
    Regarding the excise number I'm not sure what you mean, If you mean excise invoice number, you can look at the J_1IEXCDTL
    J_1IEXCHDR tables. You could check with FC on what basis the document is getting created to make out the relation ship. If it is vendor excise no etc. you can hit F1 help to find out the table etc.
    Hope it helps.
    Sujay

  • Why does mountain lion "bunch up" all my microsoft office documents that I have open when I hit f3? When I had snow leopard for example, if i had 4 or 5 different microsoft office documents open at the same time I could hit f3 and easily pick one of them

    Why does mountain lion "bunch up" all my microsoft office documents that I have open when I hit f3? When I had snow leopard for example, if i had 4 or 5 different microsoft office documents open at the same time I could hit f3 and easily pick one of them.
    Notice how in the photo, I can't identify which MS office document I would like to switch too. Perhaps since the Dashboard and Desktop windows are at the top of my screen now Apple doesn't let you have all the applications take up the full screen and be sized individually so that you can have a better idea on what to pick.
    I like the idea of grouping to an extent... If you have a bunch of random things it was hard for me to decifer between what was safari, chrome, or word. But now that they grouped them like this, if you have multiple pages of one program running, you can't switch between those pages easily like before.

    If I wanted to open any of my Applework documents I had to open them one at a time and resave them with pages. This could take weeks.I have 1000s of apple work documents.
    You don't have to open and re-save every AppleWorks document you have right now. Just wait till you need one, then do it. The documents aren't going anywhere.
    Am I dealing with Microsoft? This was a BIG surprise to me that Apple would release an OS without testing all programs.
    Frankly, it is not Apple's responsibility to ensure compatibiltiy with every piece of software available for OS X. That is the responsibility of the software vendor. Lion has been available to developers for several months before it's release, so Microtek had plenty of time to update their software. Yet they did not. How is that Apple's fault? I think Apple was very generous to give you a refund for Lion.
    I'm not trying to belittle your frustration but I do think your ire is misplaced.

  • The same Object Version Number for the same person id multiple times

    Hello all,
    I am currently facing an issue with HRMS tables and the object version number for employees. I am trying to write a report but due to the same object version number for the same person appearing in several row i am getting duplicate information. For example,
    person id 91 object version number 32 is on 4 rows and i have no idea why...help please guys, I'm at a lost so far 50 people are facing the same issue.

    Hi Baal666bobo,
    The person table is date-tracked, so the PK has effective start and end dates as well.
    Get the correct record with sysdate(or any particular date) and then check the OVN.
    Cheers,
    Vignesh

  • HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

    after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
    Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
    The SIM works on a different phone I tested it.
    Any ideas?? TKS Sandro

    “Could Not Activate EDGE” error message Update ...
    Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
    After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
    AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
    When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
    I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
    By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
    Thanks
    Joe

  • How to add text after number in the same cell? "200 units", "3Kg", "17 sqm"

    Dear Sirs,
    I have problem with adding text after a number in the same cell.
    For instance, in excel I am able to do this:
    200 units -----> this is on the same cell. Any number I type, "units" will follow automatically.
    I know that we can just type "200 units" but its in text format so it cannot be calculated supposedly I want to multiply it by others number.
    I know that we can do this by splitting into two cells, one on the left for the number "200" and another one on the right for the text "units".
    It would be helpfull if we could do this function such as "20 years", "3Kg" etc.
    Sorry to trouble you all.
    Thank you
    Q

    This is a case of uneven implementation in Numbers. This sort of functionality is available to format numbers used to label axis ticks on various charts, but not to format numbers in a cell. This feature should be requested.
    As an aside, perhaps a spreadsheet that actually managed numeric units as part of the calculation would be powerful and useful in avoiding formula bugs, something like is available in Google calculations. If you are unfamiliar with this, try one of the following examples typed into any Google search entry field:
    150 miles per gallon in liters per 100 kilometers
    100 * 20 yards / 40 minutes in mph
    Read more at http://www.google.com/intl/en/help/features.html#calculator

  • I get an Invalid Certificate notice when I try to access my https site for my printer. The serial number is the same as used by another certificate. In IE I was able to proceed to this address, but Firefox won't give me that option

    I get an Invalid Certificate notice when I try to access my https site for my printer. The serial number is the same as used by another certificate. In IE I was able to proceed to this address, but Firefox won't give me that option

    Hello,
    Thanks for contacting Mozilla Support!
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

Maybe you are looking for