Residual Clearing for Customer in F-32
Hi
We have two instances, one with New GL and the other one on Classical Gl, but ECC 6.0
I am facing issue in residual clearing for Customer Open Items. I have a customer open item - Invoice of 1000 and Payment Recipet of 200. I am clearing 200 against the invoice of 1000 and creating a residual item of 800, which will reflects as open item of 800 after posting clearing through F-32. My Issue is with the way the Accounting entry of clearing document are created.
New GL System, the Accounting Entry is reflected as:
Customer A/c Dr 800
Customer A/c Dr 200
To Customer A/c 1000
In this the line items of 200 and 1000 reflect as cleared items in FBL5N and 800 item appears as open item in FBL5N
Classical GL System, the Accounting Entry is reflected as:
Customer A/c Dr 800
To Customer A/c 800
The Line Item of 800 Cr appears as Cleared Item in FBL5N and 800 Dr Item appears as open item in FBL5N.
Why is the Clearing Document created in different ways in the two system? Do we have any configuration, which decides the nature of how the Accounting Entry for Clearing Document is created in case of Residual Clearing in F-32?
Regards
Sanil
Hi
In the Clearing Procedure in FBKP, the Posting Key and Document Type are assigned. Also, in OBA3, tolerance setting for clearing are determined. My issue is on how the Accounting Entry for Residual Item is created for system on new GL. I have checked the configuration suggested but they do not help on the way how the accounting entry is created for Clearing Document.
Regards
Sanil
Similar Messages
-
AUTOMATIC CLEARING FOR CUSTOMER
Hello,
In OB74 I have additional rules for automatic clearing -customer D :
ZUONR , BUKRS ,WRBTR
Account type : D
From acct: 1-999999999
F.13 and I'm getting message:" No customer documents selected"
Could You give me through this.....
Thanks.All the documents with the same value in the field Assignment can be cleared. Check if Assignment field of g/r ir account open item are same
please refer similar post :
Re: MR11, F.13, F.19 ,what's the differences?
https://forums.sdn.sap.com/click.jspa?searchID=3969998&messageID=3082905
Automatic Clearing in F.13
G/L automatic clearing using f.13-Problem -
BAPI for Customer Clearing(f-32)
Hi all,
I want to clear the customer clearing transaction by Residual Method will be clearing the Credit Memo .
Can anybody help me any BAPI is there for this.
Thanks.I want to clear the customer clearing transaction by Residual Method will be clearing the Credit Memo .
If i understand you (some punctuation could make you more understandable), you may execute a
SUBMIT sapf124 WITH ...
Regards,
Raymond -
MR11 docuemnt for custom clearing
Hi All,
we are unable to do MR11 for customer clearing of the co.code aginist the purchase order.
Please let us know your views and thoughts above issue.
Kind Regards,
Ram
Edited by: Ramanjaneyulu.B on Jul 27, 2011 12:35 PMHi Naresh,
Thanks for your quick reply.
We are getting error message'No documents found'
Thanks
Ram -
How to clear the open items and parked items for customer
Hi Experts,
I need to clear the open items and parked items for customer.
So any one could let me know the transaction code and procedure for clearing the items for customer.
Best regards,
Kesava balaji.Hello,
Parked items will have NO RELEVANCE, unless you post it.
You CANNOT clear parked items.
You can clear the posted items using F.13 or F-32
Regards,
Ravi -
Excise invoice clearing method for customs
Hi Gurus
this is chandu , how to clear the excise invoice for imported materials is there any transactional code to plz tell me
Example: if suppose i'm importing a material from USA so how can i clear the customs duty to make a GR at my company plz help me in thiosHi,
In Import procurement you hve separate pricing procedure, this you will assign to vendor.
Freight, Customs duties and others create as Planned delivery condition types. While defining the condition type you can define this option. Once you define in this way, while creating Purchase order against to tht condition type you can enter the vendor name(customs vendor).
For example Freight cost you hve to pay to C&F agent or FFAgent right ? In purchase order select the conditon type and click on details there you can enter the Vendor number. Like this do the same for custom duty condition types and enter customs vendor name.
In Invoice verification in MIRO select planned derivery costs then the system will show pop screen which contains the vendors entered against condition types. Select the required vendor (FFAgent for Freight charges, customs vendor for customs duties) and post the Invoice verification.
For material select Goods/Service items in MIRO, system by default it will take Imports vendor.
Before posting GR for import PO you hve to post the planned delivery costs in MIRO.
Hope its clear to you, still if u hve any questions let me know.
Flow is as follows.
1. create PO and enter the Customs vendor in condition types
2.Post customs duty in MIRO as planned delivery costs
3.MIGO
4.MIRO for Import vendor
reg
Durga
*Assign points if the info useful -
Hi,
We were getting errors for object type. Object type is a mandatory field and it is not taking "BKPFF", "VBRK" and other object key as a valid object key( Check is present in SAP Include LACC9F20 for object type). We have created a new object type in TTYP table and passed in this BAPI "BAPI_ACC_DOCUMENT_POST " . Is this is a correct approach?
After this correction when we try to post clearing document using BAPI, getting error :- "FI interface: Small difference * USD 30 cannot be distributed".
We are passing parameters :-
Document Header :-
OBJ_TYPE ( Passing manually created entry of TTYP)
BUS_ACT( RFBU)
DOC_TYPE(YD)
Other entries which I am passing are OBJ_KEY, OBJ_SYS, USERNAME, COMP_CODE, DOC_DATE, POSTNG_DATE, FISC_YEAR, PERIOD.
ACCOUNTGL:-
Item No:-1
GL Account
ITEM_TEXT
AC_DOC_NO(AR Invoice of payment document which I want to clear) for e.g. 7100000001
Customer
Item No:-2
GL Account
ITEM_TEXT
AC_DOC_NO(AR Invoice of payment document which I want to clear) for e.g. 7100000002
Customer
ACCOUNTRECEIVABLE:-
Item No.:-3
Customer( same which i have passed in GL account parameter)
comp_code:- Header company code
CURRENCYAMMOUNT:-
item No:-1
CURR_TYPE: 10 (company code curr)
Currency (from document)
AMT_DOCCUR (amount of AR invoice of account GL item no 1).
item No:-2
CURR_TYPE: 10 (company code curr)
Currency (from document)
AMT_DOCCUR (amount of AR invoice of account GL item no 2)
item No:-3
CURR_TYPE: 10 (company code curr)
Currency (from document)
AMT_DOCCUR (Sum of above two AR invoice which will be against customer)
Do you have any solution for this error? kindly suggest.Check if account for payment differents defined ?
IMG: Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Incoming Payments Global Settings -> Overpayment/Underpayment -> Define Reason Codes / Define Accounts for Payment Differences. -
Function Module/BAPI for Posting with Residual Clearing
Hello All,
I want to know whether any Function Module/BAPI avaialble for posting with residual clearing (FB05). Can we do residual clearing using the FM "Posting_Interface_Clearing"?
Please let me know how this can be handled.
Thanks in advance.
With Regards,
Senthil.Hi senthil ,
Look at these threads
POSTING_INTERFACE_CLEARING
bapi for Transfer posting with clearing
BAPI_ACC_GL_POSTING_POST for FB05
Question about POSTING_INTERFACE_CLEARING and POSTING_INTERFACE_START
Regards,
Gaurav -
Customer Account Clearing for Trading Partner
Hii,
While clearing customer account system shows following error messege of Consolidation
Consolidated companies 1300 and 001100 are different
The number of the affiliated company must be clear for the selected document type for all line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account.
I have also check documents types is maintained or not for clearing bt still system given an error
Reg
UmeshHi Umesh,
In two of the documents you are clearing one document must have the trading partner assigned to it and the other one will not have the trading partner. To clear the document either both the documents should have the trading partners or both should not have trading partners.
Regards
Neeraj -
Residual cleared item - per invoice
Hi All -
In F-28, in residual process, how can residual clearing per invoice be achieved ?
Is this possible?
Any ideas... Appreciate a response...HIi,
you can create residual payment per invoice, at the time of posting in F-28 select process open item there selct the invoice and click on residual paument and enter the remainig balance in Residual item column Eg invoice amount is 1000 recevied amount is 250. enter remaining 750 in residual item, the system will clear total 1000 and it will create a new line item for remaining balance 750
entree
40 Bank A/c 250 Dr
06 customer account 750 Dr
15 Customer account 1000 Cr
Regards
Babu -
Table for Customer and vendor open balance on a key date
Dear All,
Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
I have checked with the below table :
Customer-KNC1, KNC3,BSID, BSAD
Vendor-LFC1, LFC3, BSIK, BSAK.
But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
Plesae let me know, how to go for it.
Please suggest.Hi
Use BSID and BSIK for open items
And pass company code, year and from date and to date range in Posting date selection option
Reg
Vishnu -
Function module for customer open item aging report
Hi all,
Please let me know the FM for customer open item aging or which FM is used in tcode S_ALR_87012178 to get the age wise open item of customer.
Thanks in advance
Regards
Puneet<b><u>Part4</u></b><br />
<br />
<pre class="jive-pre"><code class="jive-code jive-java"><font color="red">"&----</font>
<font color="red">"*& Form process_data</font>
<font color="red">"&----</font>
FORM PROCESS_DATA .
DATA : L_TOTAL_TMP(15). <font color="red">" LIKE BSID-DMBTR. </font>
CLEAR : L_TOTAL,LPD_TOTALS.
<font color="red">"* As per Customer accumulate the amount.</font>
<font color="red">"* For overdue items.</font>
CLEAR : L_TOTAL_TMP.
LOOP AT L_OPENDUE_LT.
CONDENSE L_OPENDUE_LT-DMBTR NO-GAPS.
L_TOTAL_TMP = L_TOTAL_TMP + L_OPENDUE_LT-DMBTR.
AT END OF KUNNR.
LPD_TOTALS-KUNNR = L_OPENDUE_LT-KUNNR.
LPD_TOTALS-LPD_TOTAL = L_TOTAL_TMP.
APPEND LPD_TOTALS.
CLEAR : L_TOTAL_TMP.
ENDAT.
ENDLOOP.
CLEAR : L_TOTAL,LOA_TOTALS.
<font color="red">"* As per Customer accumulate the amount.</font>
<font color="red">"* For Open Items.</font>
CLEAR : L_TOTAL_TMP.
LOOP AT L_OPENDUE_LE.
CONDENSE L_OPENDUE_LE-DMBTR NO-GAPS.
L_TOTAL_TMP = L_TOTAL_TMP + L_OPENDUE_LE-DMBTR.
AT END OF KUNNR.
LOA_TOTALS-KUNNR = L_OPENDUE_LE-KUNNR.
LOA_TOTALS-LOA_TOTAL = L_TOTAL_TMP.
APPEND LOA_TOTALS.
CLEAR : L_TOTAL_TMP.
ENDAT.
ENDLOOP.
<font color="red">"* Get ageing data based slabs, and duedate.</font>
PERFORM AGEING_DATA.
LOOP AT L_BSID.
<font color="red">"* Move the data to final internal table.</font>
MOVE L_BSID-KUNNR TO FINAL_DATA-KUNNR.
MOVE L_LANDX TO FINAL_DATA-LANDX.
MOVE L_PSTLZ TO FINAL_DATA-PSTLZ.
MOVE L_NAME TO FINAL_DATA-NAME1.
MOVE L_PHONE TO FINAL_DATA-PHONE.
MOVE L_SORTL TO FINAL_DATA-SORTL.
MOVE L_BSID-ZTERM TO FINAL_DATA-ZTERM.
MOVE L_BUSAB TO FINAL_DATA-BUSAB.
READ TABLE LPD_TOTALS WITH KEY KUNNR = L_BSID-KUNNR.
IF SY-SUBRC EQ 0.
MOVE LPD_TOTALS-LPD_TOTAL TO FINAL_DATA-LPD_TOTAL.
ENDIF.
READ TABLE LOA_TOTALS WITH KEY KUNNR = L_BSID-KUNNR.
IF SY-SUBRC EQ 0.
MOVE LOA_TOTALS-LOA_TOTAL TO FINAL_DATA-LOA_TOTAL.
ENDIF.
READ TABLE AGE_DATA WITH KEY KUNNR = L_BSID-KUNNR.
IF SY-SUBRC EQ 0.
MOVE AGE_DATA-CURAMT TO FINAL_DATA-CURAMT.
MOVE AGE_DATA-AMT1 TO FINAL_DATA-AMT1.
MOVE AGE_DATA-AMT2 TO FINAL_DATA-AMT2.
MOVE AGE_DATA-AMT3 TO FINAL_DATA-AMT3.
MOVE AGE_DATA-AMT4 TO FINAL_DATA-AMT4.
MOVE AGE_DATA-AMT5 TO FINAL_DATA-AMT5.
MOVE AGE_DATA-AMT6 TO FINAL_DATA-AMT6.
ENDIF.
ENDIF.
APPEND FINAL_DATA.
CLEAR: FINAL_DATA.
ENDLOOP.
ENDFORM. <font color="red">" process_data</font>
</code></pre> -
EBS: Automatic clearing of customer open items
Hi Experts,
I am setting up the electronic bank statement with format MT940 structured with field 86. As part of the scope, business is requesting to ensure that customer open items gets cleared automatically when the bank statement is uploaded through transaction FF.5. Because bank statement contains entries relating to payments by customers into the bank account.
But here the problem is that customers will provided ONLY the name. They do NOT provide either the invoice reference number (XBLNR) or our accounting document number (BELNR).
I have searched a lot and found out that I can use the BAdI FIEB_CHANGE_BS_DATA to get the SAP customer number from the customer name given in Notes to Payee fields of MT940. Kindly correct me if I am mistaken.
Now from the derived customer number, I need to find out the related open items which match with the amount given in MT940. So, how does the system know which open items can be cleared for the given amount. Because the paid amount (by the customer) can be for an individual invoice or for a couple of invoices together. Do I need to use the enhancement user exit FEB00001 to specify the system to use fields "Distribute by age" and "Automatic search" field in transaction F-32 ?
Or is there any other better way of achieving this objective of automatic clearing of open items. Asking our customers to provide the invoice reference number is not an alternative since it has already been tried a lot for long without any result. So, business has requested for the set up in our system to ease this process of automatic clearing of open items.
Thanks you so much for your time to help me on this. I will be waiting for your kind responses.
Regards,
SridharHi Experts,
I got this resolved by using the enhancement FEB00001. If the field "Distribute by age" is activated through this enhancement, then system will be able to match the paid amount and the combination of open items for automatic clearing. If there is no exact match, then automatic clearing through FF.5 is not possible as indicated in SAP Note 124655.
There is no more necessity to use BAdI FIEB_CHANGE_BS_DATA. Complete relevant logic can be maintained directly in the enhancement itself.
Have a nice day.
Regards,
Sridhar -
Report for "record payment history" for customer ?
Report for "record payment history" for customer ?
Please send it.Dear Goutam
Through <b>FBL5N</b>, you have to select "<b>Cleared items</b>" with "from to date" and execute.
You will get a list which can then be downloaded as excel by selecting "List" on top left followed by "export" and "spreadsheet".
Thanks
G. Lakshmipathi -
How to configure Automatic Account Clearing for A/R
Hi,
Kindly advice me how to configure Automatic Account Clearing for A/R
The client requirement is
In A/R the customer accounts are not automatically clearing when a payment is posted for that account. We are still seeing all open items and all paid or cleared items when we go to FBL5N and select open items for viewing. Please make account clearing automatic for customer payments.
Thanks in advance
SunithaHi,
Use T code OB74.
Maintain for your Chart Of Account, acct type "D", From and to customer accounts and then add the critera you want. Pls note you cannot define more than 5 criteria.
Then schedule the clearing program job F.13 in the background.
Cheers.
Maybe you are looking for
-
I have alot of loose photos at home (old) and I would love to make a bunch of iphoto books and make the pages like whole page collages? How do I get my photos into iphoto in order to do this? Can I make a DVD at the drugstore and add them to iphoto
-
Can't print PDFs from Adobe Reader 7!
A few months ago I started having problems printing from Adobe Reader 7. I can view PDFs fine. I can also view PDFs online through Safari with the Adobe Reader plug in. What I've resorted to doing is using Preview to open PDFs that I've saved from Ad
-
Guy's, anyone know why my girlfriends Ipod nano is not recognized by iTunes. Also in my computer the E: (my ipod) is saying "Disk in drive E is not formatted, do you want to format now?" there is now no music on the ipod and cannot restore via iPod u
-
How to read data from clusters ??
Hi , Can any one please help me with procedure to read data from any Pcln tables.....other than pcl2. with and without using macros.. I'm planning to read data from Pcl4 from cluster LA .using the macro RP_IMP_C4_LA. i dont know how to pass the key o
-
TS1292 i can't find options of none payment method in my account
i can't find options of none payment method in my account