Resizing Accordian based on the content in each component within in it.

Hi,
I wanted to know whether is there a way to resize Accordion
component based on the content in the present tab.In my Accordion I
am using four Canvas as its four children.The data in each of the
canvas changes based on the Accordian tab selected. I want to
dynamically resize the entire accordion based on the content in the
canvas for that tab.
In short the height of the Accordion need to change
dynamically based on the tab selected. I have tried using the
resizeToContent property but this didn't solve the problem.
Thanks,
amar.

Hi,
We can resize it.Always give the height and weight in
percentage format. and turn off the horizontal n vertical scroll
policy in u r main application.
Hopes it helps you...

Similar Messages

Retrive Records based on the content in a Clob Feild

Retrive Records based on the content in a Clob Feild
I have a Table NoteFile which contains a Clob Feild NoteFileContent
and is refrenced by PK DocID
i need to Match DocID with other Tables Document and folderdocument
My Query is as Below
SELECT Doc.Pap_Doc_ID, Doc.Pap_Doc_Name , NF.NoteFileContent
From NoteFile NF , Document Doc, folderdocument FD
Where Doc.Pap_Doc_ID = FD.FoldDoc_ID and FD.FoldDoc_ParentID <> 3 and
NF.DocID = DOC.Pap_Doc_ID And NF.NoteFileContent Like '%a%'
The above query throws
ORA-00600: internal error code, arguments: [504], [0x7ADEBE00], [2], [1],
[cache buffers chains], [723], [0], [0x7ADEBE00]

Hi,
We can resize it.Always give the height and weight in
percentage format. and turn off the horizontal n vertical scroll
policy in u r main application.
Hopes it helps you...

Can we control the PDF file name that is generated by BI Publisher based on the content in the input PDF

can we control the PDF file name that is generated by BI Publisher based on the content in the input PDF?

No, there isn't. The way you're using the file is not recommended. You
should use a review tracker to avoid getting in the way of one another.

Duplicate checking based on the content of the incoming file

Hi,
We have a requirement where in we have to check whether a file has been duplicated or not based on the contents of an incoming file.The threads which I have seen in SDN deal with the duplicate checking based on the filename of the incoming file.
The incoming file has the following structure :
Recordset                                     Occurance-1
       |....... Idoc                              Occurance 1...unbounded
                   |...... segment             Occurance 1
We are required to make a check based on certain fields which occur in the segment.There are about 4 fields which we will have to take from the incoming file and carry out the check.These 4 fields exist in different segments.We will have to update a ztable with these 4 fields and then perform an rfc lookup to check for the contents of the incoming files with this table,and reject or process the file based on whether the entries exist in the table or not.
Please let me know if there is any way this can be achieved.
Appreciate if anyone could help me on this.
Thanks and Regards,
Induja

SAP PI 7.1 Mapping Enhancements Series: Graphical Support for JDBC and RFC Lookups
Use this crazy piece for any RFC Mapping Lookups!
The specified item was not found.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5877---- [original link is broken] [original link is broken] [original link is broken]
Imp
SAP NetWeaver Process Integration 7.1: Mapping Enhancements Blog Series
SAP PI 7.1 Mapping Enhancements Series: Mapping Enhancements Demo
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
How to check JDBC SQL Query Syntax and verify the query results inside a User Defined Function of the Lookup API
The specified item was not found.
The specified item was not found.
Making CSV File Lookup Possible In SAP XI !!!
SAP PI 7.1 Mapping Enhancements Series: Parameterized Message Mappings
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1888-----Imp [original link is broken] [original link is broken] [original link is broken]
Triggering XI Alerts from a User Defined Function
Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part II

Searching based on the content of an uploaded document

Hi,
Is it possible to search based on the content of the document I have uploaded. The system used is ECC 5.0.
Eg : I have uploaded resumes of employees and I have search based on their skills. Is it possible to search based on the skill which is mentioned in the resumes and provide the output.
Thanks,
Sarath.C

I can't do that without knowing the structure of your document, it all depends on wether the data you need is in a fixed position in a fixed line or it's in a variable position and the correct line or position needs to be found before using it.

Is the number of histogram pixels the same for each channel within each layer?

Dear Photoshop Scripting Forum:
I have written a script to isolate the number histogram pixels for each channel within each layer of a file.
However, I have found some unexpected results: That, the number of pixels is the same for each channel within each layer.
For example,
Layer 1 has 18,979 pixels by itself, and so does each channel within it (Red, Green, and Blue)
Layer 1, Channel Red, has 18,979 pixels
Layer 1, Channel Green, has 18,979 pixels
Layer 1, Channel Blue, has 18,979 pixels.
This does not seem right to me.
Does someone else have the same experience, or knowledge of something else?
I am wondering if there is a bug in my script.
If need be, I will post the script, but it's kind of long for a forum.
Thank you.

The following is for RGB 8bit images.
The red historgram is an array of red values of the pixels that range from 0 to 255. Each element in the array has the number of pixels that have that red value. So for example if you had a layer that is pure red 255,0,0 all the pixels would be in the 255 element and there would be no pixels in the other elements. The red historgam still has the same number of pixels as the layer. They are just all in one histogram element( they all have the same value ).
But even if you know that all the pixels in a layer are all in the last element(255) of the red histogram you still don't know the color of the pixels. A white pixel has a red value of 255. So does a yellow, magenta, etc pixel. If you only know the red value of a pixel the pixel could be one of over 65000 colors. Most of which would not be considerd 'red'
It is the three channels together that detemine a pixel's color. Unless the layer is one color you can not tell the color of the pixels from looking at the histogram.
Unless you use the color range selection then get the histogram of the selection. Even then you need to decide what color value make up 'red'

HELP !!! How can I set the size of each component separately

Please tell me, when adding components (a mix of
labels , buttons etc.) on a container (swing), how can I set the size
of each component separately.
for example:
the code here has a mix of button and a grid that is actually another JPanel. Its a part of a bigger
program. When running the grid is cut (not seen in its full size).
So, please try to anser also about the specific acse of frame contining another frame in it , and the interior should be right sized.
The relevant part of the code:
=========================================
public class Reversi extends JFrame {
public static void main(String[] args) {
Reversi ourGame = new Reversi();
public Reversi() {
super("Grid Reversi");
setSize(new Dimension(300, 300));
setDefaultCloseOperation(EXIT_ON_CLOSE);
Grid g = new Grid(); // the grid was built at another part..
ReversiGame ourGame = new ReversiGame();
JButton b;
JFrame f = new JFrame("Hello Java");
f.setSize(new Dimension(300, 300));
f.setDefaultCloseOperation(EXIT_ON_CLOSE);
Container c = f.getContentPane();
c.add(g,BorderLayout.NORTH );
c.add(b = new JButton("Hola"), BorderLayout.CENTER);
//f.pack();
f.show();

BorderLayout chooses the sizes of each of the components added to it. Choose a different layout manager (or set the placement/size manually with a 'null' layout)
http://java.sun.com/developer/onlineTraining/GUI/AWTLayoutMgr/shortcourse.html

How to determine output based on the content of purchase order

Hi Gurus,
I've a typical requirement at my present project. With vendor X we have punchout catalogs. while creation of shopping cart, we are not allowing the user to mix catalog items and non catalog items into the same shopping cart. Once the shopping cart all shopping carts are automatically coverted into PO.
Now the challenge we are facing is, if the PO is created based on items from catalog, we want to send such PO via XML interface to the vendor. If the PO is created based of items which are free-form, we want to send such PO via Smartform email attachment.
As this condition can only be determined at runtime, I'm finding a challenge to configure this. In both PO cases, vendor is same but the content of the PO is different. One contains all items that are catalog based and other contains items which are non catalog.
Can someone help me find solution for this issue.
Regards,
Sam K

Change Forms for Document Output
You can use the Business Add-In BBP_OUTPUT_CHANGE_SF to override the Smart Forms that are defined in the activity Define Actions for Document Output.
This BAdI serves as an alternative to the IMG activity Condition-Dependent Document Output.
Note that no Smart Forms are used for output via XML.
Standard settings
The following parameters are available in the method CHANGE_FORMS. Depending on the input parameters, you can define other Smart Forms to output the document type.
Importing
IV_GUID
Globally Unique Identifier of the document.
IV_MEDIUM
Output medium found for this document according to Define Actions for Document Output (print: PRN, fax: FAX, e-mail: MAI, XML: MET).
IS_PARTNER
Business partner to whom the document is sent.
IV_OBJECT_TYPE
Business transaction type.
Changing
CV_SMARTFORM
Smart Form used to output the document.
E-mail output
Smart Form with which the document is added to the e-mail in the form of a PDF attachment.
Note:
Note that the BAdI with this parameter overrides the parameter form name (technical name of the Smart Form BBP_PO for example) irrespective of the defined determination technology (SRM: Purchase Order Output Determination, for example).
CV_SMARTFORM_MAIL
Smart Form used to define content and layout of the e-mail text in the case of e-mail output.
CV_SUBJECT_MAIL
Smart Form that determines the text in the (short description of the e-mail content).
As an alternative to this BAdI, you can control document output via determination technology.
For more information, see Condition-Dependent Document Output.
EXPLORE THIS badi

[ADF BC] Showing a list of values based on the contents of another list

I have tried to make a simplified example to illustrate what I want to do. Here is a picture of my example schema:
Example Schema Image
There are three entity tables: Employee, Department and Location.
There are also two intersection tabels: Employee_Location and Department_Location.
My ADF BC model layer is based on this schema.
What I am trying to do is have a creation process for an employee where you first fill in the employee details (forname and surname), then you assign the employee to a department, then - based on the locations assigned to the department - assign one or more locations to the employee.
Imagine that the employee is a door-to-door salesman and that each department in is company has several areas of a town that they cover (locations). Each employee will cover a subset of the locations that the department covers.
The first two steps are easy - the details page can be created using a form on the employee view and the department assignment can be done with a list of values drop down on the departments view.
The third step is a little more complex. You can use a shuttle to assign one or more locations to the employee, but you shouldn't just show a list of all locations, since some of these will not be covered by the department and therefore not be available to the employee. What I want is only the locations associated with the employee's department to appear in the list.
So my question is how do I model this using ADF Business Components?
Also, if an employee is allowed to be assigned to more than one department (adding another intersection table between the employee and department tables), how would I model that?

Hi,
For your reference variable name should be simply any name i.e resorts_resort.No need to put @ in front when declaring variable and to refer presentation variable you should use the below syntax
@{Variable_name}{Default_value} where default_value is some default value you want to give.
Now coming to your problem you can fulfill your requirement by simply checking constrain checkbox.If you choose all values instaed of SQL results constrain checkbox will appear.Approach followed by you should also work but constrain is an easy option.
Thanks
Sandeep
Edited by: Sandeep Saini on 10-Sep-2010 00:59
Edited by: Sandeep Saini on 10-Sep-2010 00:59

Material Valuated based on the % content

Hi experts,
I have a business scenario where I buy a raw material from a vendor which will be managed in batches.
When goods receipt is made accounting documents are created based on the active component (in %) available in the batch.
For e.g.: if the batch is 100% pure, then the GR is made at the PO price.
if the batch is 50% pure, then the GR is made at half the PO price.
I have created class and characteristics and attached to the material.
But when I make a GR I am getting an error "No proportion valuations exist for material XXX in valuation area XXX".
Expecting Ur guidance,
Adhi.

Hi
In class have you maintained organizational area "S"?. And there are many check points you need to check.
See the below link. it will help you
http://help.sap.com/saphelp_46c/helpdata/en/dd/6a5c580f6011d383720000e8a5eb64/content.htm
Regards
Antony

I need to sort an array of strings based on the number in each string.

Basically, I have a directory of files that all have the same name but each with a different number on the end.
example: image 1.jpg, image 2.jpg, etc.
When I use the List Directory function that returns an array of strings containing the file names in the directory, they don't come out in a 1, 2, 3, order like they appear in the directory. It sorts them character by character so that they come out like: 1, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 2, 20, 21, 22 etc.
Is there a simple way of sorting this array of strings with the file names (as above) so that they are in numerical order?

It's a while since this thread was started, but I am sure others will have use for this so here goes:
The in-built array sort function sorts the strings the same way DOS and Windows do. Microsoft has fixed this in the Explorer that comes with XP, however the rest of the OS(s) still sorts the old way.
The attached "AlphaLogical String Array Sort" VIs will sort strings arrays the same way as the new XP Explorer. There are three different implementations of the sorting, one based on the Insertion sort algorithm, a Quick Sort based on recursive calls (the most elegant way, but unfortunately LabVIEW has too much overhead when doing recursive calls so this is actually a very slow alternative) and finally the fastest; a stack based Quick Sort. There is also a test VI that will show you how the different implementations perform.
I had not used recursive calls in LV much until I made the attached quick sort and was a bit disappointed by the fact that it is so slow, but it's a good learning example...The ability to do recursive calls this way was introduced in LV7 I believe...There is an example here on the zone that shows how you can calulate a factorial by using recursive calls, however - unlike for the quick sort (normally) - recursive calls are actually not the optimal solution for that calculation.
Message Edited by Mads on 09-13-2005 02:30 AM
MTO
Attachments:
AlphaLogical Sorting.zip ‏142 KB

DYNAMIC INTERNAL TABLE CREATION BASED ON THE CONTENT OF ANOTHER INTERNAL TA

Hi All
I need to create an internal table at runtime.
I have a selection screen parameter which is specific to country, Which can take values below
eg:- IT_AREA for Italy(IT)
FR_AREA for France(FR)
IE_AREA for Ireland(IE).....And similary for other countries
Based on the Above parameter, I need to create Internal Table as below
DATA: itab TYPE italy_data Occurs 0.
If I declare as above, Then itab has fields from italy_data. And this internal table i will be sending it to Function Module to get data into it.
My Requirement is to Create the Internal table itab during runtime for tables italy_data OR france_data OR ireland_data based on selection screen parameter. Tables on Country may have different number of fields in it.
Can anyone help me on this??

Hi,
Here is a sample code to create a dynamic internal table.
REPORT ytrab03.
TABLES: mara, makt.
TYPE-POOLS: slis.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat,
ls_layout TYPE slis_layout_alv.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data,
ob_cont_alv TYPE REF TO cl_gui_custom_container,
ob_alv TYPE REF TO cl_gui_alv_grid,
vg_campos(255) TYPE c,
i_campos LIKE TABLE OF vg_campos,
vg_campo(30) TYPE c,
vg_tables(60) TYPE c.
DATA: e_params LIKE zutsvga_alv_01.
FIELD-SYMBOLS: <l_table> TYPE table,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
PARAMETERS: p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
is_fcat-fieldname = 'COL01'.
is_fcat-ref_fieldname = 'MATNR'.
is_fcat-ref_tabname = 'MARA'.
APPEND is_fcat TO it_fcat.
is_fcat-fieldname = 'COL02'.
is_fcat-ref_fieldname = 'MAKTX'.
is_fcat-ref_tabname = 'MAKT'.
APPEND is_fcat TO it_fcat.
LOOP AT it_fcat INTO is_fcat.
is_fieldcat-fieldname = is_fcat-fieldname.
is_fieldcat-ref_field = is_fcat-ref_fieldname.
is_fieldcat-ref_table = is_fcat-ref_tabname.
APPEND is_fieldcat TO it_fieldcat.
CONCATENATE is_fieldcat-ref_table is_fieldcat-ref_field
INTO vg_campos SEPARATED BY '~'.
APPEND vg_campos TO i_campos.
ENDLOOP.
*... Create the dynamic internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = new_table.
*... Create a new line
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
SELECT (i_campos) FROM mara INNER JOIN makt
ON mara~matnr = makt~matnr
UP TO p_max ROWS
INTO TABLE <l_table>.
LOOP AT <l_table> INTO <l_line>.
LOOP AT it_fcat INTO is_fcat.
ASSIGN COMPONENT is_fcat-fieldname
OF STRUCTURE <l_line> TO <l_field>.
IF sy-tabix = 1.
WRITE: /2 <l_field>.
ELSE.
WRITE: <l_field>.
ENDIF.
ENDLOOP.
ENDLOOP.
Regards,
Karuna.

Looking to set the result of a variable based on the content of another (new to scripts)

Hi,
I'm new to scripts, new to acrobat forms to be honest, so be gentle with me
I have a text field Acc1pnt which can accept either Y or N as an entry. Based on the answer, text field Acc1snd would always be N/A if the result of Acc1pnt is N. I'm looking for a script that will add N/A to the second text field and skip over it (make read only?) if the answer to the first field is N.
Sorry if I'm making this look like hard work. Basically a check is made as to whether an accessory is received and, if it is, whether it is 'sound' or 'damaged'. Obviously if it isn't received then it's condition is irrelevant hence N/A in the senond text field.
Also, is there something simple I can add to convert an entry to a capital letter?
Thanks in advance
Cliff

Hi Gilad
I've shied away from radio buttons as the users are used to tabbing through the fields and 'clicking' a radio button would mean taking their hands from the keyboard, I will certainly consider it though.
Acc1snd (the 2nd variable) should be editable ONLY if the answer to Acc1pnt (the 1st variable) is Y. If the value of the 1st variable is N then Acc1snd can only be N/A (not applicable) and should not be editable.
Obviously if the user makes an initial mistake and needs to change the value of the 1st variable to Y then the 2nd variable would then need to be editable.
I will run through the tutorials this evening

Can I shrink the size of a form text box based on the content?

We are helping a customer migrate from some MS Word forms to use pdf forms. We are screenscraping the data from an AS400 green screen system and populating these new pdf forms with data. however some of the text boxes are in the middle of a sentence and the text box needs to be large enough to fit 50 characters but there are many times when the data we are entering is much less than 50. The resulting document looks very strange with all of that extra white space in the middle of a sentence due to the size of the text box.
So can we somehow shrink the size of the text box to fit the number of characters in the box?
I considered making the box smaller and setting the font size to auto but I think that would look even more strange to have a word with smaller font in the middle of a sentence.
Thanks,
Trent

Sorry, I should have mentioned I am using acrobat professional 9. I see that I can change the size of the text field when I am designing the form but what I don't see is how to dynamically change the size of the text field based on what data is put inside it.
Thanks,

How to delete rows in the SQL Server table based on the contents of Excel file

Hello, everyone,
I have an Excel file which contains data for certain dates. I need to load it in a SQL Server table. But before doing that, I need to check if the table already contains data for the dates in the Excel file. If it does, I need to delete those data
first. Not sure what is the best and efficient way to do this. Your help and guidance would be much appreciated.
Thank you in advance.

there are multiple ways of doing this
Fastest method would be below
1. Have a data flow task using excel source. Then add a OLEDB destination to dump the data to a staging table
2. Have a Execute sql task to delete data from your actual table based on staging table data. The query would look like
DELETE t
FROM YourTable t
WHERE EXISTS (SELECT 1
FROM StagingTable
WHERE DateField = t.DateField)
3. Have another execute sql task to do final insert like
INSERT YourTable (Col1,Col2,...)
SELECT Col1,Col2,..
FROM StagingTable
the above operations will be set based and faster
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Resizing Accordian based on the content in each component within in it.

Similar Messages

Maybe you are looking for