Resizing clips in drop zones with motion 5.04

Can someone please help me resize clips in the dropzones. When I drag the clip into the dropzone it show as too high up causing the head of my subject to be cut off as an example. I do not see anywhere that shows a "fit" option in the inspector or anywhere else. I purchase templates with dropzones in place. Also when I try to resiize the handles that are showing, the complete drop zones resizes.
Is there some parameters I am supposed to using with the clip itself?

The "Adjust Item" tool is contextual, and will only help you move the image around inside of a Drop Zone.
If you need to "resize" the content of a Drop Zone, use the Scale parameter in the Inspector's "Image" section.
I happen to be doing this at the moment myself.

Similar Messages

Control Drop Zone with Button State

Does anyone know if you can control the display of a drop zone with the state of a button. I am working on an exercise video and would like change an image based on the selected state of three different buttons.

Use auto actions on your buttons to jump to new (almost identical) menus with different drop zone video. Auto action can be set in the Button Property Inspector/Advanced Tab. Auto-action will automatically goto the jump target (another menu) upon selection of the button. Don't set an auto-action on the button the jumps to your desired target track.
eg. - Create 3 menus A, B and C.
"Menu A" should have: 1) "Button A" as the default selected button and a jump target to whatever track you want, 2) "Button B" should have auto-action that jumps to "Menu B" and 3) "Button C" should have auto-action that jumps to "Menu C".
"Menu B" should have: 1) "Button B" as the default selected button, and a jump target to whatever track you want, 2) "Button A" should have auto-action that jumps to "Menu A" and 3) "Button C" should have auto-action that jumps to "Menu C".
"Menu C" should have: 1) "Button C" as the default selected button, and a jump target to whatever track you want, 2) "Button A" should have auto-action that jumps to "Menu A" and 3) "Button B" should have auto-action that jumps to "Menu B".
-k
G5 Mac OS X (10.4.3)
G5 Mac OS X (10.4.3)

Can you customize drop zones in Motion?

Im trying to help a client who spends an extra day on his "template" adding picture to it but then resizing and cropping when the photo's are portrait as a apposed to landscape. I'm not really sure why this takes him so long, I think he has Motion 3 so maybe someone could tell me if this is much different with drop zones? But i was looking for a way to speed up the process? Let me know? Thanks!

Drop Zones will not distort an image, but only show what will fit. If you have a perfectly square Drop Zone, and put an anamorphic clip in it, you'll cut off the left and right edges. You can always take your Motion template in FCP and Send To Motion to change the size/shape of a Drop Zone. It's pretty easy, can be done pretty quickly.

Movie Clips in Drop Zones?

I want to place movie clips into the drop zones, but cannot figure out how to do this. When I go to "Media" my movie clips are not available. The movie appears in the bottom portion of the media window, but I cannot get individual clips to put into the zone.

There's a bug in iDVD where indiviadual clips in a folder, that have other folders in with them, don't show up.
Put your clips in a folder without any other folders.
sp 1.8 GHz G5 Mac OS X (10.4.4) 3 x 300Gb Seagates, Epson 3490 scanner, Epson 830 printer

Resize Pictures for Drop Zone?

I read a thread from about a year ago that brought up resizing images to get them to fit in a drop zone correctly. I just started using idvd and just ran into this problem, and it truly annoys me that Apple wouldn't allow resizing and image within idvd to get it to fit, or drag what part of the image shows in the drop zone...
Anyone have a solution, or is this still a "pay to get it" type of thing with pro tools...

So what you really need is to reposition the image within the drop zone (as opposed to resizing) .... is this correct?
If so, have you already tried holding down the control key as you click and drag the image to the desired position?
Repositioning an image or movie in a drop zone
When you drag a picture or movie into a drop zone, the aspect ratio of the image is preserved, but it is scaled larger or smaller to fill the drop zone. As a result, sometimes part of the image is cut off and does not appear in the drop zone. In this case, you can move the image to choose which portion is visible in the drop zone.
To reposition an image or movie in a drop zone:
From the drop zone on the menu (not in the drop zone editor), click the image or movie and press Command.
Drag the image until the part you want is visible in the drop zone.
Keep these things in mind as you position an image:
◼
If you drag a narrow image to a drop zone, the image is scaled vertically, and you can move the image up or down only.
◼
If you drag a wide image to a drop zone, the image is scaled horizontally, and you can move the image side to side only.
◼
If you accidentally drag the image too far, you will remove it from the drop zone. (The cursor changes from a hand to a puff of smoke.) Choose Edit > Undo to restore the image to the drop zone.
Repositioning a movie in a drop zone is different from selecting which part of a movie shows in a drop zone (which allows you to select which frame of the movie is displayed in a drop zone). For more information, see Related Topics below.

Resizing photos for drop zones

When I drop a photo into a drop zone in iDVD '08 it stays huge and only a small part of the photo can be seen. I have resized to 768x576 as the HELP suggested but it made no difference. No matter how small I made the photo, it got blown up to a large size. I know you can move the photo a little using the command button and the mouse, but unfortunately that doesn't help much when the image is so big.
Any ideas? I'm just about ready to pull the last couple of hairs out of my head! This has never been a problem in iDVD '06
Many thanks

Changing the dpi won't help - iDVD and iMovie don't care about it. The theme displays the entire image from top to bottom (more or less), but since the window is portrait mode on a landscape image, you loose about 1/4 of the image on each side. There doesn't seem to be much you can do with it (other than not use it).
What I would do is create a 640 x480 image with a 120 pixel wide black band on either side and insert a 400 pixel wide by 480 pixel high image in the middle between the black bands. The theme should show you just about all of the image you have inserted when you place the 640x480 image in the drop zone window. I wish there were an easier way, but I've had to use such trial and error methods since I started working with iDVD back in iDVD 2 days.
F Shippey

Drop Zones from Motion to DVD-SP ...?

I have done a template in Motion with a drop zone in it.
I want this drop zone to be usable in DVD Studio Pro.
When I import the .motn file into DVDSP and drag it on it displays the drop zone OK as a down-pointy arrow drop zone symbol in the right place in my template.
But when I try and drag a MOV asset to it, nothing happens except the usual "Set Background", "Create button & Track" etc.
How do I drag an asset onto that drop zone which I can see right in front of me in my template?
Thanks,,

Those are really good. I like the Plasma TV one and the 9-block 3D.
In Motion I can zoom and spin drop zones though, and it's this animation that would be very nice to see in DVD-SP.

Resize photo in Drop Zone

I have just completed my first non-PC DVD creation!!! I have run into a problem that I can't figure out, I have checked the discussion groups and I don;t believe anyone other than me has run into this: I grabbed some photos (3) from my iPhoto collection, dropped them into the "Drop Zone editor", and they are displayed on my menu, very nice, etc. However the photo is displayed so large that all you can see is my child's left eye and left forehead (for example). How can you re-adjust the photos that iDVD uses (either before pulling into iDVD or once in iDVD) so that that they are vaguely right size? I have tried left- and right-clicking eveywhere, no luck. I have tried taking one of the photos, amking a copy form iPhoto onto my desktop, resizing it down to 3 by 2 inches, adn then trying to use that "shrunk" photo - no change! Any ideas anyone..........

I used Photoshop to try different sizes until I could fit our logo just the way I wanted. The final image size that seems to work fine is 693w x 520h in pixels. Your image can be 693w but not all 520h will make it on. I had to position our logo which is roughly 260h about 1/3 of the way down from the top as the bottom part gets cut off. You need the extra white space on the bottom but not width wise.

Drop Zone with Audio

Is it possible to create a video Drop Zone for a template in FCP that plays with audio. I am doing a 16_9 Background with 4_3 Drop Zone, but when I use it in FCP and drop the video it plays without audio. Am I missing some preference or is it just not possible to create this?
Thanks

That's a real shame: having to edit the audio separately beat the convenience of the drop zones in templates.
Thanks Andy.
Enrique

Wronge clips in drop zones

When I drag a clip into the drop zone of a theme, a different clip appears and plays in it's place. I have tryed deleting the incorrect clip and drag and pasting again, but the same clip keeps comming up. An suggestions?

There's a bug. Instead of playing the clip you drop in the drop zone, iMovie plays from the beginning of that clip's media file.
As Matti suggested, the solution is to export the clip from the Timeline to a Full Quality movie, then import that movie to the project and drag it to the drop zone.
Karl

Dropping Frames with Motion JPEGA Quicktime Files ...720X486

Hi All,
Some help if anyone knows. Heres my setup, Desktop G5 Dual 2.3 with 1 gig of Ram. I'm working with Quicktime media: Motion JPEGA Quicktime generated out of a Discreet Smoke NLE System. Whats happening is I'll start to play a relatively short clip, 30 seconds, and it will give me the dropped frame
warning.
First thing, is 1 GIG of Ram sufficient for these files? Or is this some kind
of preference setting? I did notice that the QT files had audio at 32 Bit
where the sequence settings only allow you to go to 16.
Any responses appreciated
thanks
pm
G5 Dual 2.3 Mac OS X (10.4.3) 1 Gig RAM

Where are they stored? Firewire drives won't cut it at this compression...
Shane
"There's no need to fear, UNDERDOG is here!

Apple motion 5 template drop zones play only 1080p video clips. 720p will play outside of dropzone.

I am also getting a -1 error when trying to export with the 720p clip in a dropzone. I bought the clip stock and they didn't offer this one in 1080p. Is there any explanation as to why this clip will not run in the dropzone but does on the canvas?

You shouldn't be "loading" drop zones in Motion. You should be doing that in FCPX (as long as the drop zone source well is published.) You do not have to use Motion to "bake" video for import into FCPX. Install the template for FCPX [ place the effect folder in ~/yourHomeFolder/Movies/Motion Templates/<TypeOfEffect>/<CategoryFolder - create a new one if you want>/<place effect folder here> ]
The types of effects are Effects, Titles, Generators, Transitions.
The effect you bought came in a folder. That folder structure must be maintained for FCPX. That usually means: a Motion document (.moef, .moti, .motr or .motn file), 2 .pngs and a Media folder. If any of these are missing, it will not work in FCPX.
To use the drop zone in FCPX, apply the effect to the clip (or if it is a Title, place the title over the storyline); click on the Drop Zone source well, then click on the clip you want to apply to the drop zone from either the Event browser or the storyline. You'll see a "2-up" display, and you should see an "Accept" button in the viewer to finalize the application to the drop zone.
If you have the same problems in FCPX, let us know!

Motion 5 / FCP X - Frustrating Drop Zones

I've been (trying) to use Drop Zones lately on a number of projects and while I've been able to kludge things here and there to get them to work properly, they sure have frustrated me. The projects I'm working on need snippets of properly timed video floating around the screen, usually within the opening sequence for the video. The trouble is I've never been able to really figure out the timing for these things.
1) Initially, the logical thought was (for me, at least) to set at least an in point for the video before dropping it into the Drop Zone in FCP X. That certainly didn't work because it appeared as though FCP X totally ignored my clip's in point. I wanted that clip video to start exactly at the beginning of that drop zone.
2) Since that didn't work I did some Internet research and someone posted that Drop Zones ignore clip in points. They said that when selecting the clip for the drop zone to place the cursor on the exact frame where you want the video to start before applying it to the Drop Zone. Well, that works to an extent.
Here's what I found after doing some experimentation in both Motion 5 and FCP X (latest versions of each). First, I created a video with timecode in it so that I could accurately track where the video really started on the first frame of the individual Drop Zone. The video starts with 10 seconds of color bars followed by 5 minutes of burned in timecode, then another 10 seconds of color bars. I created a simple Motion Generator with four Drop Zones - upper left, upper right, lower left and lower right. Each Drop Zone was placed exactly 10 seconds apart. So, for example:
For the first test I placed each Drop Zone within one Group in Motion. Drop Zones start at the following timecode for each location as follows:
UL: 00:00:00:00
LL: 00:00:10:00
UR: 00:00:20:00
LR: 00:00:30:00
After publishing the project, I loaded it into FCP X. I used the same timecode video for each Drop Zone starting it at timecode value 00:01:00:00. Now, one would think that each drop zone window, having been placed exactly 10 seconds apart, would show timecode values for the inserted videos also each 10 seconds apart. But they don't! All four Drop Zones show exactly the same timecode value. They are acting as if all four were placed within the Motion 5 timeline starting at 00:00:00:00. But they weren't.
So, I thought, what would happen if I placed each Drop Zone in Motion in a separate Group? I created four Groups, each one holding only one Drop Zone. It didn't make a difference. The timecode videos in each window were still in sync with one another.
The only way I can get this to work properly is to offset the beginning of each clip by -10 seconds. Unfortunately, if there's not enough "preroll" in the clip to do that, I'm out of luck.
But it gets stranger! Further experimentation leads me to believe that all of the Drop Zones within a project reference themselves to the very first Drop Zone within the project. I picked a new point within the timecode video - in this case, the 2 minute point (00:02:00:00) and dropped it into the UL drop zone. I did the same then for the other three and now they all track based on that 00:02:00:00 point within the video!
But it gets even stranger!!! I tried one more experiment, this time loading the Drop Zones in reverse order. That seemed to work. But still, why should I have to mess around like this trying to sync drop zones in some of weird order?
The question is, why do Drop Zones work this way and what can be done to fix this problem? However I select the first frame of video for a particular drop zone should be what that drop zone references when rendering. Ideally it would be great to be able to use an in point on the clip, but I'm also happy with just moving the clip's cursor to the first frame. It's easy enough to do. Hopefully the software team working on these apps can come up with a solution that makes sense. Thanks.
John

I've had this too and the fix then was to delete my project render files (FCP that is).
Russ

Drop Zone Resize

I'm using one of the templates in Motion and when I drop in a photo into the drop zone I'd like to resize the dropped in pic. Can't figure out how to do this.
Can it be done?

Dan,
With your drop zone highlighted in the LAYERS tab, go to your Inspector window, click the image tab. you will see your "drop zone" checked. just beneath it is a parameter called "fit". it has 3 choices: fit, center and stretch. I think FIT: fits the image in the drop zone with the correct aspect ratio, CENTER: centers the image at it's original size, in the center of the drop zone, and STRETCH: stretches the image to fill the drop zone.
chose the one that fits your need. you can also make adjustments to the image in the properties tab after you have placed the image in the drop zone. hope this helps
steve

MOTION 4 - I can't locate correct drop zones for template

I'm working in MOTION 4 and a template I purchased online.
I'm not deeply experienced with MOTION (one of the reasons I prefer
templates), but I have used built-in MOTION templates and those from 3rd parites
and other sources on many prior occassions. I'm familiar with dragging
the elements you want to customice into the drop zones.
The problem I'm having is with a Calendar template. I've been
playing for hours now trying to get
the video or image into the drop zone. For instance this template is
made of of a bottom part
that shows a January calendar, and the top of the calendar is the drop
zone where you drop in
the picture you want to customize to represent January. And there is a
counterpart for all 12 months and it flips through all 12 months.
No matter how hard I try, I can't drag my images into the right area of
MOTION Canvas or layers area to get it into the right
drop zone corresponding to the month I'm shooting for.
This seems straight forward, but the template is confusing. I've tried
trial and error for hours now, but they're not
ending up where I need.
Is there someway to see ONLY the drop zones in MOTION? I keep replacing things
I don't intend.
Any quick assistance would be appreciated. I've contacted the 3rd party I purchased the template
from but haven't heard back yet and on deadline. Help!

ichbinesderelch wrote:have you tried using xrandr? xrandr -q shows available outputs, xrandr --output outputadapter(like VGA) --mode 1280x1024, as far as i can see, virtual monitor is set high enough that this should kinda work!
Yes, I tried xrandr:
$ xrandr --newmode "1280x1024" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
$ xrandr --addmode VGA 1280x1024
$ xrandr --output VGA --mode 1280x1024
$ xrandr --output VGA --right-of LVDS
At first this didn't work at all, so I tried to mess with screen resolution applet and got output on the second monitor, but not at the desired resolution.
I tried running these commands again and got output on the second monitor, but at the wrong resolution. The strange part is that the resolution I want is listed by xrandr:
$ xrandr -q
Screen 0: minimum 320 x 200, current 2304 x 800, maximum 2560 x 2048
VGA connected 1024x768+1280+0 (normal left inverted right x axis y axis) 0mm x 0mm
1280x800@60 60.0 +
1360x768 59.8
1024x768 60.0*
800x600 60.3 56.2
640x480 59.9
1280x1024 60.0
LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1280x800 60.0*+
1024x768 85.0 75.0 70.1 60.0
832x624 74.6
800x600 85.1 72.2 75.0 60.3 56.2
640x480 85.0 72.8 75.0 59.9
720x400 85.0
640x400 85.1
640x350 85.1
TV disconnected (normal left inverted right x axis y axis)

Resizing clips in drop zones with motion 5.04

Similar Messages

Maybe you are looking for