Resizing large quantites of images using image processor - STUCK

I have upgraded to Photoshop CC. I am attempting to resize large quantites of images using the image processor. I need both the width and height set to an exact number for web use. When I enter the pixel size into the "resize" boxes and click run, the sizes i get are correct on one dimension but slightly off on the other dimension. When I just do one image at a time to these same dimensions it resizes correctly? It appears it only does when selecting large qunatites. Any suggestions?die

Since you do not want to crop your images to a square 1:1 aspect ratio changing the canvas to be square will not make your images square they will retain their Aspect Ratio and  image size will be changer to fit within your 1020 px square. There will be a border or borders on a side or two borders on opposite sides.   You do not need a script because Photoshop ships with a Plug-in script to be used in Actions.   What is good about Plugins is the support Actions.  When you record the action the plug-in during action recording records the setting you use in its dialog into  the actions step.  When the Action is played the Plug-in use the recorded setting an bypasses displaying its dialog. So the Action can be Batch.  The Action you would record would have two  Steps.   Step 1  menu File>Automate>Fit Image... in the Fit Image dialog enter 1020 in the width and height  fields.  Step 2 Canvas size enter 1020 pixels in width and height  not relative leave the anchor point centered it you want even borders on two sides set color to white in the canvas size dialog. You can batch the action.
The above script will also work. Its squares the document then re-sizes to 1020x1020  the action re-sizes the image to fit with in an area 1020 x 1020 then add any missing canvas. The script like the action only process one image so it would also need to be batched. Record the script into and action and batch the action. As the author wrote. The script re size canvas did not specify an anchor point so the default center anchor point is uses  like the action canvas will be added to two sides.

Similar Messages

  • Rollover images using image maps

    alright so heres what im trying to do. I have one really big
    image, and i have about 4 image maps on it. what i want is for
    everytime you roll over on of them, a new layer (which are hidden)
    pops up. Would that be possible using image maps?
    i cant seem to figure out how to use the behavior panel to do
    this

    > Would that be possible using
    > image maps?
    Yes.
    > i cant seem to figure out how to use the behavior panel
    to do this
    Select the mapped area. Apply the Show/Hide Layer behavior.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "franco937523ut" <[email protected]> wrote
    in message
    news:efi43i$bqh$[email protected]..
    > alright so heres what im trying to do. I have one really
    big image, and i
    > have
    > about 4 image maps on it. what i want is for everytime
    you roll over on of
    > them, a new layer (which are hidden) pops up. Would that
    be possible using
    > image maps?
    > i cant seem to figure out how to use the behavior panel
    to do this
    >

  • How do I save an image using image capture after i scan a document?

    How do I save an image in image capture, after I've scanned a document?

    Hi, and welcome to Apple Support Communities.
    The process may differ a bit, depending upon which version of the OS you are using. Open the Image Capture application and click on the Help menu for it.
    In Mac OS X 10.6.8, I get this:
    Control + click on image and choose to "Open Link in New Tab" (or window) in order to see the full-size image.
    According to those instructions, it looks as though the scan should be automatically saved to the folder you've chosen.

  • Problems with dating downloaded images using Image Browser

    When I download a day's pictures with Image Browser to my Mac, and some images were taken before 5 p.m. and some after 5 p.m., any of them taken after 5 p.m.  are kicked into the next day's folder on my computer.
    My camera and computer dates are correct. Time zone (Pacific) is correct. Even my tech savvy son can't figure this one out. Can anyone help me? Thanks!

    Hey RJ, I was able to create it no problem using either Rectangle Tool with 10px roundness (left), or the the Rounded Rectangle Tool (right).
    See live example here with drop shadow.
    Download original sample file here.
    Couple of tips to remember.
    - Use .jpg (100 quality) or png for each of the slices for them to show 'smoothly'. (I notice your screen example uses .gif, and it's not recommended when drop shadows are used)
    - For the top/bottom make sure the slice extends just a tab bit beyond where the 'corner' on the shape occurs. Thats why your seeing a little 'extra' graphic on your edges.
    hope this helps
    h

  • Dynamic images using image field

    Does anyone know how to dynamically send a pdf file to the image field of an Adobe form?  I'm able to send tiff, jpg, and bmp files using an image field and graphic on the context, but I need to print a pdf file within an Adobe form.  Does the pdf file need to be converted to tiff, jpg, or bmp?  If so, how can this be done in abap?
    Regards,
    Zane

    Does anyone know how to dynamically send a pdf file to the image field of an Adobe form?  I'm able to send tiff, jpg, and bmp files using an image field and graphic on the context, but I need to print a pdf file within an Adobe form.  Does the pdf file need to be converted to tiff, jpg, or bmp?  If so, how can this be done in abap?
    Regards,
    Zane

  • Is there a way to format images using Image Catalog Script in Indesign cs4?

    I'm trying to make photo cards that are 3x4". I have 53 photos and I want one on a page. The script gets all the pages, but I can't figure out how to change the page size when I use the script. I keep getting 8 1/2x11. I have a master page set up. Anyone know how I can do this?
    Thanks!

    It looks like that will make a document using whatever the current default is—the same thing you would start from if you did File=>New=>Document. So you should make a new document preset (File=>Document Presets=>Define...) at the size you want, then make a new document, choosing that preset. Close that document and then run the script again.
    Jeff

  • Transparent border appears when I use Image Size to shrink an image (bug)

    In CS2 (9.0.2) and CS3 (10.0.1), whenever I shrink an image using Image Size, my layers get a slightly transparent edge. As a game developer, I make tiling textures a lot, and this generally ruins their tiling-ness.
    Try this:
    - create a 32x32 image, make it white
    - add a layer, fill it with black
    - shrink it to 16x16 or 20x20, using any of the Bicubic resampling methods
    - notice that the edge pixels of the black layer are slightly transparent. This is most noticeable in the corners of the image.
    Is there a better place for me to report this bug? I haven't found one.

    Haha, you mean it's a bug in the spec rather than a bug in the implementation? (Unless there is actually a reason someone would want it to work that way.)
    Yeah Bilinear and Nearest Neighbor both avoid the problem, but of course the image doesn't look as good.
    I work around it by duplicating all my layers before shrinking. The problem is obvious (in-game) with only one layer, but still subtle enough that it's usually invisible after duplicating. Annoying, but it works.

  • Create Image using MDT 2013

    Hi ,
    I am quite new for MDT 2013. I have recently installed MDT 2013 in my Windows Server 2012.
    Now , I do have about 10 physical machine with different hardware specification inside. I have installed Windows 8.1 with all required software in it and now I want to distribute the same image in all 10 another physical machine.
    Can anyone provide me the steps to implement this...
    Do I need to create the image using image x software and then use it as a standard image to be deploy it in rest of the systems..
    Thank you...

    I was getting exact same error.
    here is what I did to fix it.
    You need to do all this in a virtual envinronment.
    1- import Windows 8.1 x64 from the DVD and add it to your listed os in MDT
    2- create standard task sequence and select the OS you imported in step one. you need to add suspend to your TS ( look it up on how to )
    3- For some reason WinPe x64 bit kept giving error during deployment so I used WinPe x86.
    4- import Winpe x86 boot.wim into your WDS if you use Pxe boot or create a boot disk from the ISO and boot your VM from it.
    5- deploy windows 8.1 x64 to your VM ,make sure to select " capture image ".
    make all the necessary changes when windows is installed  and MDT  suspends the deployment, take snapshot of your VM , and then cintinue the deployment to finish the capture.
    6- import the new captured image into MDT
    7- creates new standard TS or modify your existing one to deploy the newly captured image.
    8- update your deployment share and start the deployment of your new image.

  • Displaying video using a processor

    how can i resize the capture video by using a processor? i tried to resize the captured images by resizing the panel but the image gets distorted in result. i figured out that i need to use a processor in order to manipulate the video. need help pls

    maybe you use buttons on monitor. resize picture how like.

  • How to fit to size to show the whole image in image display?

    HI, I am using a control palette to display my video images using image display. However, the size is alway out of proportion. How do i show the whole image in the small box screen size. Basically how to fit to size for the images? 
    Solved!
    Go to Solution.

    This should do the trick:
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • When I have resized and saved an image in Photoshop (CS, version 8.0 for Mac) using image size, why is it so large when I open it in preview or another image viewer? Has it actually saved according to the size I specified?

    When I have resized and saved an image in Photoshop (CS, version 8.0 for Mac) using image size, why is it so large when I open it in preview or another image viewer? Has it actually saved according to the size I specified?

    You want to view the image at the Print Size, which represents the size that shows in the Image>Resize Dialog.
    View>Print Size
    Since screen resolution is almost always lower that the print resolution (somewhere between 72 and 96 usually), images will always look bigger on the screen, unless you view them at print size.
    (apple Retina displays have a much higher resolution than normal screens, closer to the average print size resolution)
    more info:
    Photoshop Help | Image size and resolution

  • How to Use Image Processor for Multiple Sizes

    I'm trying to use Image Processor to work on a folder of images and to create several sizes of .jpg's . I find an option to Save as JPEG in one size only. Is there any way to set up Image Processor to save JPEG to multiple sizes?
    Thanks in advance for your help!!!

    Hi Mehtap,
    Using the script will give you multiple selections.
    This is how I did it and it works well. It just separated the values by semicolon ";" .
    TEXT_1.setText(DS_1.getFilterText("0CUSTOMER"));
    When selected only one value:
    When selected more than one value:

  • Error message when trying to use image processor in CS2

    Hi
    I am trying to use image processor to condense 500 proofs for my website - however although I have done many times before with no problem, now when I hit the Image processor button before I even get to key in details it is bringing up the sorry something major has happened message and I can't continue - the details of this message are as follows - ref error : this.dlgMain.ddset on Change is not a function :810 - does this mean anything to anyon? Any ideas on how to overcome would be much appreciated.
    thanks

    Go to Russell Brown's website and download his package for CS2. His 1-2-3 Processor is much more flexible than the one provided by Photoshop.

  • Colour washed out when using image processor in Bridge CS6

    Hi there
    I hope somebody can help please?!
    I am editing raw files in Camera Raw 8.2, then using image processor through Bridge CS6 to save them as both jpegs and tiffs.
    I am finding the colour on the saved files is coming out a little washed out and faded.
    If I open them individually and save them in PS6 as jpeg and tiffs, the colour remains vibrant and true to the original raw file.
    I have thousands of these files to go through and don't have time to open each one individually in this way so I am desperate to automate this process while still retaining the great colour in the original shots.
    Can anyone tell me why the shots are coming out this way and help offer a solution for me please?
    Any advice would be massively appreciated!
    Many thanks
    Benny P

    Hi,
    Do you have Include ICC Profile checked at the bottom of the Image Processor dialog?

  • Using image processor from RAW format to JPEG, the images are suddenly very muted colour, greyish tone, and just awful looking.

    Any ideas as to why, when I am converting a group of images through image processor into JPEG, the resulting images are AWFUL.  I have been using this process for years without a concern, and suddenly the JPEG files are very greyish, muted tones and just terrible looking… HELP!  I'm WAY too busy right now to be dealing with this and having to manually save each image to JPEG

    Which Color Space are the images in?
    What are your Color Settings?

Maybe you are looking for

  • Video signaling problem caused by 1.9, 2.0 BIOS (pointing out a BIOS problem)

    Hi, i have a problem with the video signal. At random times when i boot up my computer, the computer would power up but there is no signal to the monitor. there is no hdd activity (via the hdd led) and nothing seems to be happening just that the fans

  • Allow Posting to Previous Period - MMRV

    Dear Friends, We can open / close MM periods thru MMPV & see the currently open periods thru MMRV. Now when we check current Period in MMRV, we see three periods: Current period                 07 2009 (October 2009) Previous period               06

  • Problem using payloadZipBean to unzip a file

    I would like to run OS command to zip large amount of xml into one zip file before XI pick it up, then use unzip option in payloadZipBean to unzip all the xml files so XI can process them one by one from memory, this will reduce lots file I/O time. B

  • Table name for the transaction data

    Hello Gurus,     what is the table name for the transaction data which we have created through t.code PRO5. we are generating report for the total kms per vehicle type for a employee. these data in which tables can i get? the data related to trips ? 

  • How do I get an empty toolbar for buttons to disappear? Link to picture in description.

    https://www.dropbox.com/s/prdidvbwox208xr/Screen%20Shot%202014-04-29%20at%207.02.27%20PM.png It has nothing on it, but it won't go away.