Resource for all the Effects
Hi,
Is there a resource (other than the PDF manual) that describes all the Effects in FCE/FCP?
Everytime I desire to try an effect to see what it does I have to render it in order to see what happens. This is very slow on my machine.
None of my books have a reference to all the effects.
Thank you in advance for any advice.
Brock Fisher
San Diego
imac Mac OS X (10.4.3)
Hi,
OABL is the correct transaction. If you uploaded data via normal process for legacy data upload (AS91), then you should not worry about FI data as none was created. However, if you did some postings on the assets, then you should keep in mind, as mentioned before, that this data will remain in the system.
Regards,
Eli
Similar Messages
-
Why can't GB let me use 'electric guitar' option when using Nio 2/4 interface - I have to use real instrument and miss out on all the effects. Is this normal for all interfaces? The Nio reads hte guitar but GB doesn't....
Usually effects packages are AU plugins that would have no effect on track selection. Interfaces should have no control over what kind of track you can select. I really think something else is going on her maybe something you overlooked.
Did you choose the input channel in the track info pane. Try both channel 1 mono or channel 2 mono. Make sure the track is record enabled. -
How can I know about the latest updates / versions which when available for all the CC products, without having to install and check it with the Desktoip Creative Cloud Application ?
Thanks for looking into this Jeff!
I work with an Inventory module software and is responsible for software detection across several computers. Once an updated version comes up, I update our database with latest software details to get it detected if installed on any machines.
The problem tracking updates with Desktop Creative Cloud Software are;
1)We have to have it installed with the CC applications in-order to get the notification of the latest updates and have to check everyday.
2)Only relates to the latest updates, so in-between we may miss a prior update unknowingly.Hence, the remote machines having those updates may not get detected with the software version update which would create problem in reporting.
3)For all CC products, there is no base or previous updates available for installation if we miss one.
I went through the Adobe Products Update pages [Product updates] which holds good when it comes to Acrobat and Reader software which I follow to track down any newer updates but this is inconsistent when it comes to CC products like in After Effects CC, Dreamweaver CC etc...
So overall to be very specific, is there any one channel I can follow to get the notifications only for the updates on CC products and then may be I can rely on Desktop Creative Cloud for installation if not available anywhere like in product update pages of Adobe ?
Regards,
Subrat -
Deployment Optimizer - Equal weightage for all the locations in the network
Hello All,
I am having difficulty in assigning equal weightage for all the locations in the deployment network. My scenario is as described below:
Deployment Source location: LOC1
Destination locations: LOC2, LOC3
I am running Heuristics to plan LOC2, LOC3 & LOC1, followed by
a Deployment Optimizer run at LOC1 to deploy to LOC2 & LOC3.
ATD quantity at LOC1 is always calculated after saftisfying the requirements at LOC1 and the remainder is deployed to LOC2 & LOC3 based on the cost settings. This seems to be the case even if I don't run the heuristics at LOC1 and start deployment optimizer after running the heuristics at LOC2 and LOC3.
The need at this client place is that all three locations are equally important even though LOC1 is the only deploying source location.
This applies for all demand categories i.e. Sales orders, Forecast and forecast at all the three locations.
I would appreciate if anybody has done this kind of configuration before and let me know how to model this.
Thanks,
VenkatHave you follow all this checking ?
If you think that you already follow all the steps, but the value is not as per your config, you can raise ticket to SAP about it.
But I suggest you to double check your computation.
To determine a vendor's price level, the system compares the vendor's effective price with the market price for the material.
1. The system first checks whether the buyer has maintained a market price for the material or the material group.
2. If not, the system calculates the market price which is equal to the average of the effective prices for all vendors supplying this material. Prices from purchase orders and prices for subcontracting are dealt with separately.
3. The system then applies the effective price for the vendor from the conditions.
4. The vendor's effective price is then compared with the market price and the percentage variance determined.
5. The system then assigns a score to the variance in accordance with the settings made in Customizing.
6. This score is valid for the material, that is, at info record level. Since the score the vendor receives for a subcriterion is based not on an individual material, but on the total of all the materials he supplies, the following steps are necessary:
7. The system repeats the comparison between effective price and market price for each of the vendor's materials.
8. The system calculates an average from the sum of the scores determined. This average represents the vendor's score for the subcriterion Price Level.
Edited by: w1n on Apr 19, 2010 2:35 PM -
I purchased a student subscription to Creative Cloud. I got the confirming email. When I attempted to install the aps, kept getting a 30-day trial for all the aps. In the case of Photoshop, it was expired. How do I activate my Creative Cloud?
ChristinaW1111 for information on how to resolve the connection error preventing the active membership from authorizing then please see Sign in, activation, or connection errors | CS5.5 and later. If you have any questions regarding the steps listed within the document you are welcome to update this discussion.
-
Query For Finding Yearly Opening and Closing Balance for All the Items
Hi Experts,
I am working on Query Based Report for finding the Yearly Opening and Closing Stock for all the Items
i will give yearwise selection and I want opening and closing stock in between that years
Warm Regards,
Sandip Kokate
Edited by: Sandipk on May 20, 2011 1:58 PMHi,
Declare @SDate DateTime
Declare @EDate DateTime
Declare @Whse nvarchar(10)
Set @SDate= (SELECT min(F_RefDate) FROM OFPR T1 where T1.[Name] ='[1%]' )
Set @EDate= (SELECT max(T_RefDate) FROM OFPR T1 where T1.[Name] ='[%1]' )
Set @Whse=(Select Max(s2.Warehouse) from OINM S2 Where S2.Warehouse = '[%2]')
BEGIN
Select @Whse as 'Warehouse', a.Itemcode, max(a.Dscription) as ItemName,
sum(a.OpeningBalance) as OpeningBalance, sum(a.INq) as 'IN', sum(a.OUT) as OUT,
((sum(a.OpeningBalance) + sum(a.INq)) - Sum(a.OUT)) as Closing ,
(Select i.InvntryUom from OITM i where i.ItemCode=a.Itemcode) as UOM
from( Select N1.Warehouse, N1.Itemcode, N1.Dscription, (sum(N1.inqty)-sum(n1.outqty))
as OpeningBalance, 0 as INq, 0 as OUT From dbo.OINM N1
Where N1.DocDate < @SDate and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,
N1.Dscription Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance,
sum(N1.inqty) , 0 as OUT From dbo.OINM N1 Where N1.DocDate >= @SDate and N1.DocDate <= @EDate
and N1.Inqty >0 and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription
Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance, 0 , sum(N1.outqty) as OUT
From dbo.OINM N1 Where N1.DocDate >= @SDate and N1.DocDate <=@EDate and N1.OutQty > 0
and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription) a, dbo.OITM I1
where a.ItemCode=I1.ItemCode
Group By a.Itemcode Having sum(a.OpeningBalance) + sum(a.INq) + sum(a.OUT) > 0 Order By a.Itemcode
END
I hope this will work for you.
In above query you can also user OFPR.Code, OFPR, Category OFPR.Indicator instead of OFPR.Name.
Regards
Vaibhav Anharwadkar
Edited by: Vaibhav Ancharwadkar on May 24, 2011 9:23 AM -
How to update the condition price in the sales order for all the items
Hi,
How to update the condition price for all the itmes in the sales order to carry out the new price automatically through a stand alone program, for all the orders in the billing due list table?
Thanks,
BalaramHi,
There is a change in the requirement.
Scenario:
I have created a sales order with some 4 condition types, in that 2 condition types are of class A & B and the other two is of class C. Here I need to update the condition price of class A & B only and the remaining condition types should not get update even though there is an updated price is available.
For the above scenario, I need to write a standalone program. Do we have any function modules to update the price of the single condition in the sales order? Please tell me how we can update the sales order at item condition level.
Thanks.
Balaram -
How can I shut off all of the pop-up windows for all the Firefox updates?
How can I shut off all of the pop-up windows for all the Firefox and Thunderbird updates?
Apparently now Mozilla creates new versions of their browser and email apps every two weeks instead of just creating updates... I'm tired of all of the pop-up requests for these constant installation requests and all the problems that the new version installations create... I just want to use the software and be left alone.
I can't find a way to make Firefox and Thunderbird stop with the pop-up requests for new installations... is there a way to do this or has Mozilla just got it rigged so one can't just use the software without re-installing a new version every two weeks and running in to new plugin issues and missing features every time?
Help!
Thanks,
numetroIs it possible that her computer is infected with malware.
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
Greetings: I have multiple iPads and iPhones. I want all to be able to be able to stream to our Apple TV. All of the docs I see say you must have the same Apple ID for all the devices, but we each have our own Apple ID. Is this just a doc short coming?
You can each have your own ID for your own iTunes accounts, but in order for a device to stream via AirPlay to the same Apple TV, everything must use the same homesharing ID. This is not the same as your iTunes account ID (although it can be for one of the devices)
-
How to put a text in upper left hand corner for all the application?
I want to put a text in upper left hand corner for all the pages on application?
I don't want to put one page by another.
Thank you.If you put it in a region on page zero, it will be inherited by all pages of the application.. Literally in the upper left corner? Even the login page? You could also modify the template page that your using from your theme, so that all pages would have this attribute, whichever you are more comfortable with..
Thank you,
Tony Miller
Webster, TX -
USELESS ONLINE HELP FACILITIES
For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation.
Incident 1. Since many months attempts to download new and updated APPs produced a response – Apple ID Disabled. I had no time to consult an APPLE Store due to work in distant lands. When I finally visited yesterday I was told that as my IPAD has been reported as stolen, and APPLE in its wisdom had blocked its usage! I am not sure how they became so misinformed and nobody every advised me while with a few swift moves APPLE could have located me by email address or SKYPE.
Incident 2. Once the above anomaly had been fixed I tried to down load a newspaper and diligently input my address, credit card number and personal data. Repeatedly I was advised that my Credit Card was invalid and my postal code was incorrect! Really!
I was left to guess that having moved from UK to the US I should have advised APPLE! Not being told of this requirement brought about a second visit to APPLE Store in the same day to waste both mine and their time with a routine anomaly. How parochial in the context of a globalized world!
In each case I tried to resolve the issues using online access to a help line and by calling by phone at the numbers on the APPLE Website. In each of four separate occasions I diligently went through the routine and ended up with a message that thanked me for contacting Apple followed by a polite ‘Good Bye’!
In desperation I went to an Apple Store for the second time in a day as it is close to where I live when I am not working. On both occasions I was courteously attended to by Apple Staff.
However, my work is usually far away from the US and it is generally many thousands of miles to the nearest Apple Store therefore online help is viewed as imperative if one is to resolve issues away from home.
Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help? It would cost nothing in relative terms and might restore my high level of anti-APPLE sentiment that these two recent events have provoked.
Peter Hanney
Miami, Fl.Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help?
If that is your question, the answer is at the bottom right of this web page. It is clearly marked "Contact Us" and is the best way, really the only way, to contact Apple.
If there were a publicly posted email address for concerns such as yours, it would be quickly filled with spam in about three minutes, thereby becoming instantly useless to you and everyone else. Apple would need to change it hourly, if not more often. That is also the reason you ought not to post your name, location, and what appears to be your iPad's serial number on this publicly viewable website.
Apple does not respond here and I can find no other questions for your fellow Apple users to answer. -
Change the Page Title for all the pages when viewing the Reports in Bi Publisher
Hello ,
I have a requirement for changing the Page Title for all the report displayed pages on the browser window.As far as I know, answer is NO.
it's very simple answer Manikandan-S-Oracle
for 1210326 's requirements there are some places for changes of property "title" and in some pages "title" can be different
"one place or option for changing" does not exist imho ( may be i'm wrong )
so you can change places for your needs but not sure what it's adequate
as example
...wls\user_projects\applications\bipdomain\xmlpserver\catalog\navigator.jsp --> find <title>
it changes title in http://somehost:7001/xmlpserver/servlet/catalog
... wls\user_projects\applications\bipdomain\xmlpserver\home\home.jsp --> find <title>
it changes title in http://somehost:7001/xmlpserver/servlet/home -
Exception handling for all the insert statements in the proc
CREATE PROCEDURE TEST (
@IncrStartDate DATE
,@IncrEndDate DATE
,@SourceRowCount INT OUTPUT
,@TargetRowCount INT OUTPUT
,@ErrorNumber INT OUTPUT
,@ErrorMessage VARCHAR(4000) OUTPUT
,@InsertCase INT --INSERT CASE INPUT
WITH
EXEC AS CALLER AS
BEGIN --Main Begin
SET NOCOUNT ON
BEGIN TRY
DECLARE @SuccessNumber INT = 0
,@SuccessMessage VARCHAR(100) = 'SUCCESS'
,@BenchMarkLoadFlag CHAR(1)
,@BenchmarkFlow INT
,@MonthYearStart DATE
,@MonthYearEnd DATE
,@StartDate DATE
,@EndDate DATE
/* Setting the default values of output parameters to 0.*/
SET @SourceRowCount = 0
SET @TargetRowCount = 0
/*Setting the Start and end date for looping */
SET @MonthYearStart = @IncrStartDate;
SET @MonthYearEnd = @IncrEndDate;
/* Setting the @InsertCase will ensure case wise insertion as this sp will load data in different tables
@InsertCase =0 means data will be inserted in the target TAB1
@InsertCase =1 means data will be inserted in the target TAB2
@InsertCase =2 means data will be inserted in the target TAB3
@InsertCase =3 means data will be inserted in the target TAB4
@InsertCase =4 means data will be inserted in the target TAB5
@InsertCase =5 means data will be inserted in the target TAB6
if @InsertCase =0
WHILE (@MonthYearStart <= @MonthYearEnd)
BEGIN
SET @StartDate = @MonthYearStart;
SET @EndDate = @MonthYearEnd;
/* Delete from target where date range given from input parameter*/
DELETE FROM TAB1
WHERE [MONTH] BETWEEN MONTH(@StartDate) AND MONTH(@EndDate)
AND [YEAR] BETWEEN year(@StartDate) and year(@EndDate)
/*Insert data in target-TAB1 */
BEGIN TRANSACTION
INSERT INTO TAB1
A,B,C
SELECT
A,BC
FROM XYZ
COMMIT TRANSACTION
SET @MonthYearStart = DATEADD(MONTH, 1, @MonthYearStart)
SELECT @TargetRowCount = @TargetRowCount + @@ROWCOUNT;
END -- End of whileloop
END TRY
BEGIN CATCH
IF @@TRANCOUNT>0
ROLLBACK TRANSACTION
SELECT @ErrorNumber = ERROR_NUMBER() ,@ErrorMessage = ERROR_MESSAGE();
END CATCH
END--End of Main Begin
I have the above proc inserting data based on parameters where in @InsertCase is used for case wise execution.
I have written the whole proc with exception handling using try catch block.
I have just added one insert statement here for 1 case now I need to add further insert cases
INSERT INTO TAB4
A,B,C
SELECT
A,BC
FROM XYZ
INSERT INTO TAB3
A,B,C
SELECT
A,BC
FROM XYZ
INSERT INTO TAB2
A,B,C
SELECT
A,BC
FROM XYZ
I will be using following to insert further insert statements
if @InsertCase =1
I just needed to know where will be my next insert statement should be fitting int his code so that i cover exception handling for all the code
MudassarHi Erland & Mudassar, I have attempted to recreate Mudassar's original problem..here is my TABLE script;
USE [MSDNTSQL]
GO
/****** Object: Table [dbo].[TAB1] Script Date: 2/5/2014 7:47:48 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[TAB1](
[COL1] [nvarchar](1) NULL,
[COL2] [nvarchar](1) NULL,
[COL3] [nvarchar](1) NULL,
[START_MONTH] [int] NULL,
[END_MONTH] [int] NULL,
[START_YEAR] [int] NULL,
[END_YEAR] [int] NULL
) ON [PRIMARY]
GO
Then here is a CREATE script for the SPROC..;
USE [MSDNTSQL]
GO
/****** Object: StoredProcedure [dbo].[TryCatchTransactions1] Script Date: 2/5/2014 7:51:33 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[TryCatchTransactions1] (
@IncrStartDate DATE
,@IncrEndDate DATE
,@SourceRowCount INT OUTPUT
,@TargetRowCount INT OUTPUT
,@ErrorNumber INT OUTPUT
,@ErrorMessage VARCHAR(4000) OUTPUT
,@InsertCase INT --INSERT CASE INPUT
WITH
EXEC AS CALLER AS
BEGIN --Main Begin
SET NOCOUNT ON
BEGIN TRY
DECLARE @SuccessNumber INT = 0
,@SuccessMessage VARCHAR(100) = 'SUCCESS'
,@BenchMarkLoadFlag CHAR(1)
,@BenchmarkFlow INT
,@MonthYearStart DATE
,@MonthYearEnd DATE
,@StartDate DATE
,@EndDate DATE
/* Setting the default values of output parameters to 0.*/
SET @SourceRowCount = 0
SET @TargetRowCount = 0
/*Setting the Start and end date for looping */
SET @MonthYearStart = @IncrStartDate;
SET @MonthYearEnd = @IncrEndDate;
/* Setting the @InsertCase will ensure case wise insertion as this sp will load data in different tables
@InsertCase =0 means data will be inserted in the target TAB1
@InsertCase =1 means data will be inserted in the target TAB2
@InsertCase =2 means data will be inserted in the target TAB3
@InsertCase =3 means data will be inserted in the target TAB4
@InsertCase =4 means data will be inserted in the target TAB5
@InsertCase =5 means data will be inserted in the target TAB6
IF @InsertCase =0
WHILE (@MonthYearStart <= @MonthYearEnd)
BEGIN
SET @StartDate = @MonthYearStart;
SET @EndDate = @MonthYearEnd;
/* Delete from target where date range given from input parameter*/
DELETE FROM TAB1
WHERE START_MONTH BETWEEN MONTH(@StartDate) AND MONTH(@EndDate)
AND START_YEAR BETWEEN year(@StartDate) and YEAR(@EndDate)
/*Insert data in target-TAB1 */
BEGIN TRANSACTION
INSERT INTO TAB1 (COL1,COL2,COL3)
VALUES ('Z','X','Y')
SELECT COL1, COL2, COL3
FROM TAB1
COMMIT TRANSACTION
SET @MonthYearStart = DATEADD(MONTH, 1, @MonthYearStart)
SELECT @TargetRowCount = @TargetRowCount + @@ROWCOUNT;
END -- End of whileloop
END TRY
BEGIN CATCH
IF @@TRANCOUNT > 0
ROLLBACK TRANSACTION
SELECT @ErrorNumber = ERROR_NUMBER() ,@ErrorMessage = ERROR_MESSAGE();
END CATCH
PRINT @SUCCESSMESSAGE
END--End of Main Begin
GO
I am just trying to help --danny rosales
UML, then code -
Custom CSS-Applying selected background for all the cols in the report
Hi,
I am trying to set a particular background for all the columns in the report(not for all the projects,so that I can avoid option of manually setting background color for complete report.For this I thought custom CSS is best option.So edited custom.css(C:\OBI11g_Middleware\Oracle_BI1\bifoundation\web\app\res\s_blafp\b_mozilla_4) file with below code and went to the Answers-> Criteria->Choose Column->style-> check "Use Custom CSS Class"->MyCell
Code used in custom.css
.MyCell { background-color: #00ff00; font-style:italic; font-weight: bold;}
Somehow I dont see the background color applied to any of the columns in report.Can anyone had successful attempt of this Custom CSS.Thanks in Advance.I am trying both the solutions.
User 979493,
I started manually writing the code instead of pasting and almost worked.In the mentioned below paths I dont have custom.css file,so I created one and manually entered below code.But does it work for only that particular column and not for all the columns.Is it supposed to work for all the columns or just that column.
For example: I have 2 cols in the report,I used "Use Custom CSS Class" -> MyCell for the first column and when I ran results it shows background color for only col1 and not for col2.I thought this feature will apply background color for all the columns in the report.Please correct me if I am wrong.
custom.css file content:
.MyCell{background-color: #00ff00;font-style:italic;font-weight:bold;} -
Defaulting the Sotrage location for all the line items in my sales order
Hi,
I have a scenario to default the storage location automatically in my sales order for all the line items. It is not going to change for a particular sales org. Dist. channel & Division combination. Can you pls. suggest me a solution for this.
Thanks
Ghanesh.Hi,
You can default the storage location by using the below user exit
Storage location
Auto determination of storage location as u2018XXXXu2019 for sales order
Include - MV45AFZB
Form - USEREXIT_SOURCE_DETERMINATION
IF (VBAK-AUART = 'XXXX' and VBAK-VKORG = 'XXXX' and VBAK-VTWEG = 'XX').
VBAP-LGORT = 'ABCD'.
Regards,
Gopal.
Edited by: Gopalakrishnan S on Feb 25, 2010 7:35 AM
Maybe you are looking for
-
Hi Everyone, I'm facing an issue on xslt list view web part. I created 2 xslt list view web part on the same page, the issue is: the edit menu only show on the first xslt list view wp, I don't see the edit menu in the second list view wp, I check the
-
Help with Quality of Service (QoS)
Hello all, I'm trying to set up QoS on my Actiontec MI424WR (Rev. I) router. I want to prioritze my Xbox One. I followed the guide linked below. http://support.actiontec.com/doc_files/MI424WR_Rev._E&F_How_To_Configure_QoS.pdf When performing an Xbox
-
Installing oracle 10g xe edition on linux
Hi, I am trying to install oracle 10g xe edition on redhat linux. By default the oracle database rpm package uses /usr/lib partition for installation files. Is it possible to install the oracle database files in /export partition instead of default l
-
How can you tell what users have which reports open in Infoview
Hi! In Crystal Server XI, is there any way that you can see what reports are currently being viewed in Infoview and by what user? Or a history of how many times a report has been viewed so that I can tell which reports are not used that often and ma
-
If anyone has any ideas..please email me at [email protected]