Restarting App server and Process Scheduler

Hi all,
Can any body send me the document on how to Restart App server and Process Scheduler.
Thanks In Advance
Karthik

Use the psadmin utility under $PS_HOME/appserv.
https://peoplebooks.uta.edu/PSOL/pt846books/eng/psbooks/tsvt/chapter.htm?File=tsvt/htm/tsvt03.htm%23H3005
Nicolas.

Similar Messages

Seperate NT service for App server and Process Scheduler

Is it possible to create a separate NT service for App server and Process Schedule for the same environment? Everytime i need to shutdown either App Domain or Prcs Domain (not both) using service, it brings down both.
I could use psadmin but services run as a different user.
Please advise.

What PeopleTools release are you using? Off the top of my head, one strategy would be to use different PS_CFG_HOMEs for the App and the Process scheduler. The service points to the PS_CFG_HOME and reads the pswinsrv.cfg file to know what to start/stop. I'm not sure there is a way to override psntsrv and tell it to use a different config file, so you may need a different HOME. You could also create a script that wraps the service start/stop. It could edit/update the config file prior to stop/start and remove Process Scheduler from the config and then reinsert it later.
You could have a stop_app/start_app and stop_prcs/start_prcs script that would copy in specific versions of the pswinsrv.cfg file for what you want to do.

App Server and Process Scheduler stuck while booting

Hi All,
We are facing a big issue in our production instance.The application server showed down while accessing the PIA.When we tried to reboot the same it didnt start and was getting stuck after some steps..few snipets are below after the last PSSRENSRV process does not proceed further.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
        CMDTUX_CAT:819: INFO:Process id=5584 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
        CMDTUX_CAT:819: INFO:Process id=5600 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
        CMDTUX_CAT:819: INFO:Process id=5616 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
        CMDTUX_CAT:819: INFO:Process id=5632 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
        CMDTUX_CAT:819: INFO:Process id=5648 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
        CMDTUX_CAT:819: INFO:Process id=5664 Assume started <pipe>.
exec PSRENSRV --A --   -C psappsrv.cfg -D FNPROD -S PSRENSRV:The tuxedo,appserv and renserv logs shows,
renserv log
----- Begin booting PSRENSRV -------------------------
0.5608 [14/Jul/2011 07:51:54](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.
----- Begin booting PSRENSRV -------------------------
0.5056 [14/Jul/2011 07:58:47](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.
----- Begin booting PSRENSRV -------------------------
0.780 [14/Jul/2011 08:21:04](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.------------------------------------------------------------------------------------------
tuxedo log
receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!JSH.5060.5084.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
082104.UKLO2K3S55!WSH.4364.1752.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!WSH.4472.4416.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!WSH.1684.4128.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!WSH.4256.4172.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!JSH.4876.496.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
082104.UKLO2K3S55!WSH.4896.4284.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!JSH.4800.1036.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
082104.UKLO2K3S55!WSL.3904.4032.0: LIBTUX_CAT:703: ERROR: Cannot get statistics on message queue 43
082104.UKLO2K3S55!JSL.4316.4024.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
082104.UKLO2K3S55!WSL.3904.4032.0: WSNAT_CAT:1197: INFO: Exiting system
082104.UKLO2K3S55!JREPSVR.5768.5800.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 61480 (errno = 22)
082104.UKLO2K3S55!WSL.3904.4032.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
082104.UKLO2K3S55!JSL.4316.4024.0: JOLT_CAT:1197: "INFO: Exiting system"
082104.UKLO2K3S55!JREPSVR.5768.5800.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
082104.UKLO2K3S55!JSL.4316.4024.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
082105.UKLO2K3S55!PSWATCHSRV.6124.568.-2: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=2,buf=9580216,bytes=4572,type=-1073741824,flag=2048
082105.UKLO2K3S55!PSWATCHSRV.6124.568.-2: LIBTUX_CAT:268: ERROR: Failed to stop serving------------------------------------------------------------------------------------------
app serv log
PSADMIN.4944 (0) [07/14/11 07:48:28](0) Begin boot attempt on domain FNPROD
PSWATCHSRV.4720 (0) [07/14/11 07:48:33] Starting
PSADMIN.4944 (0) [07/14/11 07:52:29](0) End boot attempt on domain FNPROD
PSADMIN.4944 (0) [07/14/11 07:55:46](0) Begin boot attempt on domain FNPROD
PSWATCHSRV.1412 (0) [07/14/11 07:55:50] Starting
PSADMIN.4892 (0) [07/14/11 08:08:07](0) Begin boot attempt on domain FNPROD
PSWATCHSRV.5032 (0) [07/14/11 08:08:13] Starting
PSADMIN.4892 (0) [07/14/11 08:08:27](0) End boot attempt on domain FNPROD
PSADMIN.6104 (0) [07/14/11 08:20:28](0) Begin boot attempt on domain FNPROD
PSWATCHSRV.6124 (0) [07/14/11 08:20:32] Starting-----------------------------------------------------------------------------------------
tuxedo log
213815.UKLO2K3S55!PSSAMSRV.6072.6040.0: LIBTUX_CAT:262: INFO: Standard main starting
213815.UKLO2K3S55!PSRENSRV.2440.2444.-2: 07-13-2011: Tuxedo Version 8.1 32-bit Windows.
213815.UKLO2K3S55!PSRENSRV.2440.2444.-2: LIBTUX_CAT:262: INFO: Standard main starting
214434.UKLO2K3S55!BBL.5964.4464.0: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=257,buf=10285048,bytes=4572,type=-1073741824,flag=0
214434.UKLO2K3S55!PSRENSRV.2440.2444.-2: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=277,buf=11551960,bytes=8668,type=805306369,flag=0
214434.UKLO2K3S55!BBL.5964.4464.0: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=257,buf=10285048,bytes=4572,type=0,flag=0
214434.UKLO2K3S55!BBL.5964.4464.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 33242 (errno = 22)
214434.UKLO2K3S55!BBL.5964.4464.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
214434.UKLO2K3S55!BBL.5964.4464.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
214434.UKLO2K3S55!PSWATCHSRV.5208.4528.-2: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=258,buf=9654368,bytes=27996,type=-1073741824,flag=2048
214434.UKLO2K3S55!PSWATCHSRV.5208.4528.-2: LIBTUX_CAT:268: ERROR: Failed to stop serving
214507.UKLO2K3S55!tmboot.4616.5152.-2: 07-13-2011: Tuxedo Version 8.1 32-bit Windows.
214507.UKLO2K3S55!tmboot.4616.5152.-2: TUXNT_CAT:4: ERROR: Cannot access ipc server (The system cannot find the file specified.
214507.UKLO2K3S55!tmboot.4616.5152.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
214508.UKLO2K3S55!PSADMIN.868: End boot attempt on domain FNPRODAlso the process scheduler was not getting booted the logs are shown below,
scheduler log
085646.UKLO2K3S55!restartsrv.2484.4116.-2: server BASE/101: CMDTUX_CAT:587: INFO: Cannot restart server, scheduling for cleanup
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:550: WARN: Cleaning up restartable server BASE/101
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 4300 died; removing from BB
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5372 died; removing from BB
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5640 died; removing from BB
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5768 died; removing from BB
085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: 07-14-2011: Tuxedo Version 8.1 32-bit Windows.
085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: GP_CAT:1077: ERROR: Unable to open environment file E:\Psoft\PRDAPP\appserv\prcs\FNPROD\psprcsrv.env for reading
085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: LIBTUX_CAT:353: ERROR: Error putting ENVFILE E:\Psoft\PRDAPP\appserv\prcs\FNPROD\psprcsrv.env into environment
085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: server BASE/101: CMDTUX_CAT:551: INFO: server removed
085743.UKLO2K3S55!BBL.4044.5996.0: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=80,buf=10304328,bytes=4572,type=-1073741824,flag=0
085743.UKLO2K3S55!BBL.4044.5996.0: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=80,buf=10304328,bytes=4572,type=-1073741824,flag=0
085743.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 64479 (errno = 22)
085743.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
085743.UKLO2K3S55!BBL.4044.5996.0: CMDTUX_CAT:26: INFO: The BBL is exiting systemIs this a problem with Tuxedo if so what has to be done...Pls help its a bit urgent...
Thanks in advance...

First of all; if a problem is urgent then you should always contact Oracle support instead.
It looks like the domain is corrupt within Tuxedo. You could try to reconfigure the domain so that it will get recreated in Tuxedo. Make sure you have a backup before you do this. To reconfigure the domain simply open a CMD box and type the following command (from the appserver directory):
psadmin -c configure -d "DOMAIN_NAME"
You can only use this command for the application server.

How to get text file from app server and process it.

Hello experts,
I created a test data based form my recording. Now, I do not know where can I find it.
Also, I want to create a program that lets users input the file name in the input parameter
(selection screen) and it would automatically process/split that file. Again, thank you guys
and take care!

hi viray,
im sorry i thought it was reading from presentation server....:-)
>>I want to create a program that lets users input the file name in the input parameter
(selection screen)
at selection-screen on value-request for p_file.
perform file_help using p_file.
form file_help using p_p_file.
call function 'RZL_READ_DIR_LOCAL'
exporting
name = p_dir
tables
file_tbl = t_filetab
EXCEPTIONS
ARGUMENT_ERROR = 1
NOT_FOUND = 2
OTHERS = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " file_help
Splitting File and path.
use the FM <b>SO_SPLIT_FILE_AND_PATH</b>
hope this helps,
do reward if it helps,
priya.
Message was edited by: Priya

Failed to start server domain and process scheduler in the App/Batch VM

Hi,
after the modification of /etc/tnsnames.ora in the App/Batch VM :
[psadm2@psovmab LOGS]$ more /etc/tnsnames.ora
H91TMPLT=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.1.133)(PORT=1521)))
(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=H91TMPLT.corp.peoplesoft.com))
I can't start server domain and process scheduler :
NLS:4: Cannot open message catalog TMADMIN_CAT, set 1, num 197; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog TMADMIN_CAT, set 1, num 198; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 793; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec BBL -A :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 773; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog TMADMIN_CAT, set 1, num 495; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
Attempting to boot ... INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 801; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 55021 -D APPDOM -S PSWATCHSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSAPPSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSAPPSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSQRYSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSQRYSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSAMSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -D APPDOM -S PSSAMSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSBRKHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSBRKHND_dflt:BrkProcess -- -D APPDOM -S PSBRKHND_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSBRKDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSBRKDSP_dflt:Dispatch -- -D APPDOM -S PSBRKDSP_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSPUBHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSPUBHND_dflt:PubConProcess -- -D APPDOM -S PSPUBHND_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSPUBDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSPUBDSP_dflt:Dispatch -- -D APPDOM -S PSPUBDSP_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSUBHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSSUBHND_dflt:SubConProcess -- -D APPDOM -S PSSUBHND_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSUBDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSSUBDSP_dflt:Dispatch -- -D APPDOM -S PSSUBDSP_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSMONITORSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 55021 -D APPDOM -S PSMONITORSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec JSL -o ./LOGS/stdout -e ./LOGS/stderr -A -- -n //hrapp.xflash.com:9000 -m 5 -M 7 -I 5 -j ANY -x 40 -S 10 -c 1000000 -w JSH :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec JREPSVR -o ./LOGS/stdout -e ./LOGS/stderr -A -- -W -P /home/psadm2/ps/pt/8.50/appserv/APPDOM/jrepository :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 774; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
Thanks

Hi,
- Which user are you connected with when running psadmin ?
psadmin2
- the output :
{[psadm2@hrapp appserv]$ ./psadmin
PSADMIN -- Tools Release: 8.50.02
Copyright (c) 1988, 2009, Oracle. All rights reserved.
PeopleSoft Server Administration
1) Application Server
2) Process Scheduler
3) Search Server
q) Quit
Command to execute (1-3, q): 1
PeopleSoft Application Server Administration
1) Administer a domain
2) Create a domain
3) Delete a domain
4) Import domain configuration
q) Quit
Command to execute (1-4, q) : 1
Tuxedo domain list:
1) APPDOM
Select domain number to administer: 1
PeopleSoft Domain Administration
Domain Name: APPDOM
1) Boot this domain
2) Domain shutdown menu
3) Domain status menu
4) Configure this domain
5) TUXEDO command line (tmadmin)
6) Edit configuration/log files menu
7) Messaging Server Administration menu
8) Purge Cache
9) Preload File Cache
10) Clean IPC resources of this domain
q) Quit
Command to execute (1-10, q) : 1
PeopleSoft Domain Boot Menu
Domain Name: APPDOM
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
psappsrv.cfg has changed archiving old one...
Copying APPDOM/Archive/psappsrv.cfg to APPDOM/Archive/psappsrv_123109_1116_13.cfg
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 793; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec BBL -A :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 774; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
Attempting to boot ... INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 801; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 55021 -D APPDOM -S PSWATCHSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSAPPSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSAPPSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSQRYSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSQRYSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSAMSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -D APPDOM -S PSSAMSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSBRKHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSBRKHND_dflt:BrkProcess -- -D APPDOM -S PSBRKHND_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSBRKDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSBRKDSP_dflt:Dispatch -- -D APPDOM -S PSBRKDSP_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSPUBHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSPUBHND_dflt:PubConProcess -- -D APPDOM -S PSPUBHND_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSPUBDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSPUBDSP_dflt:Dispatch -- -D APPDOM -S PSPUBDSP_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSUBHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSSUBHND_dflt:SubConProcess -- -D APPDOM -S PSSUBHND_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSUBDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSSUBDSP_dflt:Dispatch -- -D APPDOM -S PSSUBDSP_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSMONITORSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 55021 -D APPDOM -S PSMONITORSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec JSL -o ./LOGS/stdout -e ./LOGS/stderr -A -- -n //hrapp.xflash.com:9000 -m 5 -M 7 -I 5 -j ANY -x 40 -S 10 -c 1000000 -w JSH :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec JREPSVR -o ./LOGS/stdout -e ./LOGS/stderr -A -- -W -P /home/psadm2/ps/pt/8.50/appserv/APPDOM/jrepository :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 773; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8}
-Are you able to connect onto the database from there with the same user ?
{[psadm2@hrapp appserv]$ sqlplus sysadm/SYSADM@H91TMPLT
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Dec 31 11:40:12 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>}
thank you in advance
JM

Installing NT service for app and process scheduler (Windows 2003)

I have followed the install guide instructions for creating an NT service for the process scheduler, however, whenever I attempt to start the service I receive the following warning message:
The PeopleSoft H:\apps\psoft\PT849 service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service.
The service does not start properly, however when launching the services via psadmin, both the app and process scheduler processes start properly.
Any assistance would be appreciated.

I have followed the install guide instructions for creating an NT service for the process scheduleWhat are the doc you've followed ?
It is well explained here below :
http://download.oracle.com/docs/cd/E05406_01/psft/acrobat/hwtools849_itora.pdf
Task 10A-5: Starting Process Scheduler as a Windows Service
Furthermore, describe what steps have been done.
Nicolas.

Weblogic 8.1 App Server and IBM MQ Series 5.2 Issue

Hi All,
          I am trying to create a bridge between Weblogic 8.1 App Server and IBM MQ Series 5.2 and i am facing issues.
          Bridge works fine if i use QualityOfService="Atmost-once" and i am getting following error when i use
          QualityOfService="Duplicate-okay".
          Error:
          <Oct 16, 2003 6:03:35 PM PDT> <Error> <MessagingBridge> <BEA-200015> <An error occurred in bridge "MQSeries WebLogic Bridge" during the transfer of messages (java.lang.Exception: weblogic.jms.adapter.JMSConnectionHandle.acknowledge(Ljavax/jms/MessageV).>
          <Oct 16, 2003 6:03:35 PM PDT> <Warning> <MessagingBridge> <BEA-200026> <Bridge "MQSeries WebLogic Bridge" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was weblogic.jms.bridge.internal.MessagingBridgeException.)>
          Any suggestions or comments will be really appreciated.
          Thanks
          Suresh


It is weird that nothing shows up in the log after you turned on the debug.
          Actually I knew somebody has run into the same problem once.
          The problem disappeared after he did something on the MQSeries side (like
          restart the system and something else). I did not know exactly what he did.
          I am not sure if that will help you but worth trying.
          If that does work either, I'd suggest that you contact the BEA Customer Support
          and somebody will look at it for you in depth.
          Thanks,
          Dongbo
          Suresh wrote:
          > Thanks for following up on this.
          >
          > This bridge works with 6.1 app server and we are trying to use the same stuff
          > for 8.1 app server too. No, we are not using XAConnectionFactory.
          >
          > Suresh
          >
          > Dongbo Xiao <[email protected]> wrote:
          > >Is there any chance that the JMS connection factory on the MQSeries
          > >side is a XAConnectionFactory?
          > >
          > >Suresh wrote:
          > >
          > >> I am using the debug options (-Dweblogic.Debug.DebugMessagingBridgeStartup="true"
          > >> -Dweblogic.Debug.DebugMessagingBridgeRuntime="true") in my stratip
          > >script,
          > >> but, thats the maximum stack trace I can get. I am using jms-notran-adp.rar
          > >for
          > >> both QOS. Bridge is working fine when I use Exactly-once and repeatedly
          > >getting
          > >> the same message when I use Duplicate_okay. My destination queue is
          > >not able to
          > >> ackowledge the messge to the sender.
          > >>
          > >> Here I am giving nodes from my config.xml
          > >>
          > >> <MessagingBridge AsyncEnabled="false" BatchInterval="40000"
          > >> Name="MQSeries WebLogic Bridge"
          > >> QualityOfService="Duplicate-okay"
          > >> SourceDestination="MQSeries Inbound Destination" Started="true"
          > >> TargetDestination="WebLogic Inbound Destination" Targets="myserver"/>
          > >> <JMSBridgeDestination
          > >> AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDINoTX"
          > >> ConnectionFactoryJNDIName="jms.InboundMessageConnectionFactory"
          > >> ConnectionURL="t3://myserver:7001"
          > >> DestinationJNDIName="jms.InboundMessageQueue"
          > >> DestinationType="Queue"
          > >> InitialContextFactory="weblogic.jndi.WLInitialContextFactory"
          > >> Name="WebLogic Inbound Destination" UserName="username" UserPassword="pwd"/>
          > >> <JMSBridgeDestination
          > >> AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDINoTX"
          > >> ConnectionFactoryJNDIName="cn=MQ_BROKER_1,ou=inboundConnectionFactories,ou=mqseries,ou=jms,ou=Systems"
          > >> ConnectionURL="ldap://ldapServer:389/o=myroot"
          > >> DestinationJNDIName="cn=queue2,ou=queue,ou=mqseries,ou=jms,ou=Systems"
          > >> InitialContextFactory="com.sun.jndi.ldap.LdapCtxFactory"
          > >> Name="MQSeries Inbound Destination"
          > >> UserName="cn=admin,o=myroot" UserPassword="pwd"/>
          > >> <Application Name="jms-notran-adp"
          > >> Path="C:\bea\weblogic81\server\lib" StagingMode="nostage" TwoPhase="true">
          > >> <ConnectorComponent Name="jms-notran-adp"
          > >> Targets="rdoddapaneni3" URI="jms-notran-adp.rar"/>
          > >> </Application>
          > >>
          > >> Thanks
          > >>
          > >> Tom Barnes <[email protected]> wrote:
          > >> >By the way, if you are looking to improve performance, transactional
          > >> >mode may actually be the fastest. See the JMS Performance
          > >> >Guide white-paper on dev2dev for details.
          > >> >
          > >> >Suresh wrote:
          > >> >
          > >> >> Hi All,
          > >> >>
          > >> >> I am trying to create a bridge between Weblogic 8.1 App Server and
          > >> >IBM MQ Series 5.2 and i am facing issues.
          > >> >>
          > >> >> Bridge works fine if i use QualityOfService="Atmost-once" and i
          > >am
          > >> >getting following error when i use
          > >> >> QualityOfService="Duplicate-okay".
          > >> >>
          > >> >> Error:
          > >> >>
          > >> >> <Oct 16, 2003 6:03:35 PM PDT> <Error> <MessagingBridge> <BEA-200015>
          > >> ><An error occurred in bridge "MQSeries WebLogic Bridge" during the
          > >transfer
          > >> >of messages (java.lang.Exception: weblogic.jms.adapter.JMSConnectionHandle.acknowledge(Ljavax/jms/MessageV).>
          > >> >
          > >> >> <Oct 16, 2003 6:03:35 PM PDT> <Warning> <MessagingBridge> <BEA-200026>
          > >> ><Bridge "MQSeries WebLogic Bridge" encountered some problems in one
          > >> >of its adapters or underlying systems. It stopped transferring messages
          > >> >and will try to reconnect to the adapters shortly. (The exception
          > >caught
          > >> >was weblogic.jms.bridge.internal.MessagingBridgeException.)>
          > >> >>
          > >> >> Any suggestions or comments will be really appreciated.
          > >> >>
          > >> >> Thanks
          > >> >> Suresh
          > >> >
          > >

How can i access the information of my central app server and my AS

Hello i'm trying of configure my sld but when i'm about to create a technical system the wizard ask me for a central app server and App server (host and instance). where in my sap system can i found that information???. Sorry if the question is kind of obvious...i'm a beginner. Thanx in advance

Hi
SLD is for creating /Maintaining (including software product,components,etc..) system entries.
e.g.
If you want to create enrty for SAP R/3, Go to sld http://<hostname>://<port>/sld >> technical system >> select type as WebAS ABAP >> enter the ipaddress of the SAP R/3 server
You can get the details from your basis consultant or NW admin
Cheers
Jawahar Govindaraj
PS:Reward pts

Network Load Balancing between SharePoint 2013 App server and WFE

Hi,
Can we do NLB between SharePoint 2013 App server and WFE Server ?
Below is our Architecture,
1. WFE Server (1)
2. APP Server (1)
3. Database Server
4. Domain Controller
We have configured NLB but, when we stop IIS on APP server, SharePoint 2013 web app link is not working.
is it possible ?
Please help us

You can do NLB between WFE and APP server however make sure that web application service is started from central admin which host sharepoint sites.
Why do you stop IIS on APP server, definitely it will not be able to host web app sites. rather you can just disable APP node on NLB to test it.

[beginner] Relationship between app server and JBI container

Hello,
I downloaded the Sun app server as well as the JBI SDK and I would like to understand how they relate to each other. Is the JBI SDK a plug-in in the app server? Does it run on top of it? What part of J2ee are used by JBI?(servlets, ejbs, JCA???).
Thanks in advance,
Julien.
PS
Any answer is welcome. I am a complete beginner in JBI and I am looking for some primer that will help me get started with the spec...

JBI is a specification; its up to the implementations to decide how they interact with different application servers. e.g. Sun's RI may work in Sun's app server and, say, JBoss. ServiceMix is already integrated into Apache Geronimo but has deployers for any Servlet engine and JBoss.
Typically a JBI container will use servlets for HTTP bindings and can use EJBs if required. JCA integration is an option too - e.g. ServiceMix can either integrate with the application servers JCA engine or can use its own embedded JCA engine - Jencks (http://jencks.org).
James
http://logicblaze.com/

Whether java component (Not ejb, not servlet) can be deployed in App Server and get the services provided by App Server

As I mentioned in subject, I am just wondering Whether the java component (Not
ejb, not servlet) can be deployed in App Server and get the services provided
by App Server or not?

Nevermind folks - I got it to work. All my configuration was correct; I had other issues with the ejb-jar file that the verifier informed me of (my previous deployments were with the verifier turned-off).

Why use app server and EJB?

we have a project about Component-based Library for Business Information Systems.
We have chosen Point-Of-Sales System as the type of our system.
why do we need to use app server and EJB?
Hope can have replies soon. Thanks so much!
regards
beginning of EJB

Well, you don't need to. You might want to because transaction management is important for point-of-sales and app server/EJB gives you that for 'almost nothing'.

Finding the app. server and system number when importing RFC

hello experts
I would like to import RFC and I seem to forgot the app. server, and its system number. where can I find it?
Thanks
Kfir

Hi
Go to SAP Logon single click on your system and again single click at option change item..that will present at left side of your saplogon pad
you will get all the information regarding that system on which you have clicke first.

Diffrence between App Server and web Server

hi !
can anybody tell me the difference b/w App Server and Web server with an example!!!
Thanks in Advance
Naveen

lots of discussion made about this, anyway read the URLs
http://www.javaworld.com/javaqa/2002-08/01-qa-0823-appvswebserver.html
http://www.jguru.com/faq/view.jsp?EID=282323

Deployment problem on 10g App server and 8.1.6 Oracle Db

Hello
I have a problem. I have an application which were developed on Jdeveloper by using ADF Classes. Apllication has consist of 2 project 1st project run on 10g DB. Second one connected to 8.1.6. Apllication run well on Embedded OC4j of J Developer. But While Ä± have deployed the application to App Server 10g, Part of the Application which uses 10 g is working but part of the application which uses 8.1.6 not working. When I Try to connect the application i get the following error.
I thought that this may be caused because of security setting.
Application which uses 8.1.7 cannot be open JDBC connection. Authentication may cause this problem.
But i couldnt resolve
Any Idea?
ERROR MESSAGE :
at oracle.jbo.server.ConnectionPool.getConnection(ConnectionPool.java:66)
at oracle.jbo.server.ConnectionPoolManagerImpl.getConnection(ConnectionPoolManagerImpl.java:56)
at oracle.jbo.server.DBTransactionImpl.establishNewConnection(DBTransactionImpl.java:856)
at oracle.jbo.server.DBTransactionImpl.initTransaction(DBTransactionImpl.java:1095)
at oracle.jbo.server.DBTransactionImpl.initTxn(DBTransactionImpl.java:5724)
at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:6843)
at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:3886)
at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:1886)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1711)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2576)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:441)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:411)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:406)
at oracle.jbo.client.Configuration.getApplicationModule(Configuration.java:1370)
at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1328)
at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1300)
at pasttel.view.MindBalanceAction.<init>(MindBalanceAction.java:33)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:308)
at java.lang.Class.newInstance(Class.java:261)
at org.apache.struts.util.RequestUtils.applicationInstance(RequestUtils.java:231)
at org.apache.struts.action.RequestProcessor.processActionCreate(RequestProcessor.java:326)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:268)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:228)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher
.java:649)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
oracle.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:220)
at oracle.jbo.server.ConnectionPool.instantiateResource(ConnectionPool.java:135)
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:523)
at oracle.jbo.pool.ResourcePool.useResource(ResourcePool.java:318)
at oracle.jbo.server.ConnectionPool.getConnectionInternal(ConnectionPool.java:87)
at oracle.jbo.server.ConnectionPool.getConnection(ConnectionPool.java:66)
at oracle.jbo.server.ConnectionPoolManagerImpl.getConnection(ConnectionPoolManagerImpl.java:56)
at oracle.jbo.server.DBTransactionImpl.establishNewConnection(DBTransactionImpl.java:856)
at oracle.jbo.server.DBTransactionImpl.initTransaction(DBTransactionImpl.java:1095)
at oracle.jbo.server.DBTransactionImpl.initTxn(DBTransactionImpl.java:5724)
at oracle.jbo.server.DBTransactionImpl2.connect(DBTransactionImpl2.java:116)
at oracle.jbo.server.ApplicationModuleImpl.doPoolConnect(ApplicationModuleImpl.java:7073)
at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:6843)
at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:3886)
at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:1886)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1711)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2576)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:441)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:411)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:406)
at oracle.jbo.client.Configuration.getApplicationModule(Configuration.java:1370)
at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1328)
at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1300)
at pasttel.view.MindBalanceAction.<init>(MindBalanceAction.java:33)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:308)
at java.lang.Class.newInstance(Class.java:261)
at org.apache.struts.util.RequestUtils.applicationInstance(RequestUtils.java:231)
at org.apache.struts.action.RequestProcessor.processActionCreate(RequestProcessor.java:326)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:268)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:228)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:649)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
at oracle.jbo.server.DBTransactionImpl2.connect(DBTransactionImpl2.java:116)
at oracle.jbo.server.ApplicationModuleImpl.doPoolConnect(ApplicationModuleImpl.java:7073)

From the App Server oracle home, and with the same connection information as app is using, can you connect to 8.1.6 db with sqlplus?
You said it works from JDeveloper - which version?
From AS 10.1.2 (which means net/client libraries 10.1.0.3) I get
"ORA-03134: Connections to this server version are no longer supported."
To 8.1.7.4 database connection succeeds. (hint: 8.1.6 is not supported!)
Maybe this could be the culprit?

Restarting App server and Process Scheduler

Similar Messages

Maybe you are looking for