Restoration problem

Hi
We are in the process of setting DR for our production environment. We are using legato tape backup to restore the DB.
The DB was started in nomount and trying to restore controlfile from the Tape backup. We use following command to restore the controlfile.
run
allocate channel ch1 type 'sbt_tape';
restore controlfile from autobackup;
release channel ch1;
But it gives error that
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on ch1 channel at 07/13/2010 13:38:22
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2
The same problem I had while configuring legato rman backup using tape. That time I linked the library file as oracle user and it was resolved.
Linked file: ln -s /usr/lib/libnwora.so /oracle/ABP/102_64/lib/libobk.so
I tried the samething in our restoration also. But still the error exists.
Could you please guide us on this.

RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on ch1 channel at 07/13/2010 13:38:22
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2
What is your database and OS version? See below metalink note:
*ORA-19554 ORA-27211: Failed to load Media Management Library [ID 603347.1]*

Similar Messages

  • Osx Lion Restore Problems

    So I decided to restore my new 2011 21.5 inch imac back to osx lion, I decided this because apparently my macintosh hd wont let my partition it in anyway and i cant put windows on here unless I do a fresh install of lion, then I can do boot camp.
    So I booted into the recovery manager option when you start up your computer and I clicked on restore osx lion.
    It took about 6 hours to download, and then the computer rebooted, and now I dont know what to do, I went back to the restore lion option in that menu and it makes me download it all again.
    Does anyone know what I can do?
    Id  be happy if someone could help with my partitioning problem if they cant help with my restore problem.
    Thanks for the time,
    Dan

    Lion Recovery Assistant should only take a few minutes to download unless you're on the slowest Internet connection known to man. Also OS X is NOT like MS Windows that has to be reinstalled at every hickup. It is INCREDIBLY stable. On the computer I'm using right now in the 4+ years I've owned it it has NEVER needed the OS reinstalled and is totally stable. I have upgraded it from Tiger to Leopard to Snow Leopard and now Lion. It has been through countless updates and still continues to work like it is a new machine.

  • DV6-3122us/ after and during Factory restore problems

    This is a DV6-3122us 64 bit notebook, 500GB hard drive, 4 GB ram, Windows 7 Home Premium OS. I restored it from the Factory purchased recovery discs, and I had a problem with that, had to do it 3 times kept locking up at 9% on the restore part. It finally went through then said couldn't install, turned it off, and it was installed. This is Windows 7 Home Premium. Now I have lock ups when updating. The HP assistant  loads but says it has errors at the very top, and doesn't show the system information at the bottom. The hard drive only shows 80 GB allocated, and 397 unallocated. This is all the original hardware, which has been tested and has passed, memory has passed. Any Help would be greatly appreciated.

    1. Right click on the partition ( C:\ ) you want to Extend into the now unallocated partition and click on Extend Volume.
    2. Click on Next for the Welcome to the Extend Volume Wizard window
    3. Select the amount of space in MB you want to use from the unallocated partition to use to Extend this partition
    4. Select all of the available space .
    5. Click on Next.
    6. Click on Finish in the Completing Extend window
    You will now see the Disk Management console with the new extended partition volume ready to be used.
    7. Close Computer Management.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • IPad 2 Restore Problem

    So I recently restored to iOS 7.1.1 with iTunes. When I was restoring from an iCloud backup a message popped up saying that the restore can't be completed and that I should choose another backup. I looked at the support articles where it's said that I should check iCloud Server Status. There everything was normal. So I selected another backup, but the problem still persisted so I decided to do a restore with iTunes again, but that didn't work. So I decided to set up my iPad as a new iPad and erased all the content and settings. Didn't work. So now I'm stuck here with my iPad failing to get the iCloud Backup data to my device. I never had a problem like this before. Please help!

    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • System Restore problem on Satellite C660-115

    Hello everyone,
    The Satellite C660-115 my niece has a problem and I would like to make it serviceable for his Christmas.
    Turning on the computer's voltage giving as final result the message: * Can not find the operating system will ", so I tried System Restore by first pressing the 0 key, and after many tests, changing the order of the boot and the other (with F2 or F12) ... But there was nothing.
    From there, I realized that I could not go further without original recovery DVD from Toshiba. So I ordered last Saturday and got today Thursday. After as indicated by Toshiba (boot sequence beginning on CD drive), the system begins to upload (Windows is loading files ...) and then propose, on a nice table, the available languages, and choose .. .dropoff window
    If, until then, everything seemed to unfold as it should, that's that clicking the "next" button to validate my choice of language an error message appears in a dialog box named RecoGUI:
    ERROR:. IOCTL_GET_DISK_LENGTH _INFO \\ \ PHYSICALDRIVE0 The device is not ready.
    When I press OK, then it is in French:
    The hard disk # 0 is not available or incorrect RAID configuration!
    I still presses OK (I do not have much choice) and then present the following window restoration that requires me to validate the language of the operating system to install ... French (Windows Win 7)
    and states: The current size of restoration is to: Expert Mode
    Again, I click OK and a warning box warns me that: All hard drives will be completely erased. Would you like to continue?
    OK ... and cmd prompt appears that says (in short)
    Checking for Drive V: V Drive not mounted ...
    Ckecking for Drive C: ... C: unmounted!
    ending with: ERROR Copying of Recovery Base files failed!
    Press any key to continue (if I do, I find the Toshiba screen, and another cmd prompt that says so;
    Waiting for ODD To Become available ...
    ODD Drive D: ready.
    Check for medium in Drive D; ...
    Continue ...
    Drvload: Successfully loaded X: \ Windows \ inf \ battery.inf.
    No RAID - Normally continues ...
    Installation in progress ...
    Press any key to continue ... which, if I do, then placed below:
    X: \ Windows \ system32>
    That's where I stayed, because I always come back to the same.
    Could someone be kind enough to help me solve this problem?
    A big thank you in advance ...
    +Message was edited & translated+

    From my point of few we should consider two possible issues.
    1) faulty image on the new recovery disk
    2) problem with HDD as well as the partitions
    In my opinion you should check the HDD firstly.
    You can run some tests, for example you could try to install the Windows system using a clean Microsoft Windows CD (image)
    Windows 7 Home Premium 64bit image can be downloaded here:
    http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65733/X15-65733.iso
    But of course, you will not be able to activate this system without a valid serial key
    So you can use this image just for testing purposes.
    In case the image installation would run flawlessly, your recovery installation problem might be related to the faulty recovery media.
    In such case you should try to contact the recovery media provider in order to get another, new good working media.

  • Ipod Shuffle Restore problem

    I was trying to add songs to my ipod shuffle today. but it told me to restore it as it is currupt; and so I did. However, when I clicked restore on itunes 7.0.2, the progress bar began to move; but i waited for over 2 hours, and it still didnt complete.
    I could still listen to the music on my ipod as well as carry everyday tasks with it. But my computer refused to restore it.
    p.s. it didnt show the ipod in windows explorer nor in itunes, only in device manager. I fixed this by using the "Safetly Remove Hardware" tool, then replugging it in.
    Also when using the ipod software to update my ipod, it crashed.
    I'd suspect it as an usb fault, but im not sure.
    Please help me solve this problem, thanks in advance!

    after my 20G crashed a co worker loaned me his shuffle to hold me over until I made a new purchase. It seems like every time you upgrade in ITunes it creates problems. I have experienced mutiple problems with this guys Shuffle (corrupt messages, Ipod not recognized in USB). After several restores on another PC I was able to load my music again only to not have all the songs play on the shuffle. When docked, I can see them but they won't play. I have restored, deleted, reloaded everything. I don't know what else to do.
    The problem seems to be with purchased songs only.
    I find the docking to a new pc helps with the restoring issue. Once back to the factory settings, try docking to pc with Itunes library and see what happens.
    If anyone can weigh in on my issue, I would appreciate the help.
    I can't live without my music!!

  • Apple TV 1st gen Factory Restore Problems

    I have an Apple TV 1st generation that I tried to do a factory restore on.  I did not unplug durring the progress bar.  It then started up with the apple, then the opening video with all the tv screens.  It asked me for the language, I selected English, then had me choose the correct internet connection so I typed in the password for our Wi-Fi, then it came up with the code to connect to our home computer and started flashing a new code every 2 seconds.  I unplugged the Apple TV and waited about a minute then plugged back in.  It again had the normal start up, but then after the opening video it began flashing between a screen with the apple then a blank black screen then to a menu screen and cycling through each screen about every 1-2 seconds.  I unplugged again and waited about 10 minutes but then had the same results.  Is there anyway I can do another system restore as I cant get it to stop flashing. 

    I FIXED IT!!!  So here is how to fix your Apple TV 1st generation if you are having the problems listed above.  I am listing it step by step as I have not found the solution to my problem ANYWHERE and I have been looking all day and figured it out myself.  Here we go:
    If you have done a FACTORY RESTORE and it is now flashing different through different screens I recomend doing a FORCED RESTART from the totally awesome guys at MethodShop, here is the link: http://methodshop.com/gadgets/tutorials/appletv-fix/
    If their instructions do not fix your problem here is what I figured out (assuming the diagonstic test says that your Apple TV is working correctly).
    Keep your Apple TV plugged in, and allow it to go to sleep.  It can take up to 45 minutes.  Once it has gone to sleep (the screen will have photos scrolling on the TV) press the MENU button on the remote to wake it up.  The Apple TV will wake up on the MENU screen.  Scroll down to SETTINGS then select SYSTEM UPDATE.  Follow all instructions to update the system to the current update. 
    WARNING: If you take too long once you have woken up the Apple TV it will start freaking out again and you will have to let it go to sleep again.
    I have tried this twice now to make sure the first time was not a fluke and its working perfect now.
    Hope this helps someone else!

  • Time machine backup restoring problem

    i recently restored my mac. i saved everything through time machine on a hd. i want to restore some notes from the inbuilt notes app from mac. i know the folder is hidden and sandboxed and all and i followed the procedure, but MY PROBLEM IS that i dont have a containers folder in the backup folder. i typed in search box and everything but dint come. now the peculiar part is that when i typed com.apple.notes there was a folder. but when i opened it it dint have the data-library-core data folders. the other thing is that when i looked for the folder on my mac, it was there but the end instruction said that there should be a p18.notesexternalrecord thing in the 0 folder, which wasnt there either. somebody plz help because my very important documents are there and my job may be at stake. please help.

    Quit Notes and temporarily disable iCloud synchronization, if applicable.
    Triple-click the line below to select it:
    ~/Library/Containers/com.apple.Notes
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu. A Finder window should open with an item selected. Enter Time Machine and restore the selected item.

  • Backup restoring problem

    i recently updated my n95 with the v20 update.
    before that i backed up my phone data using the content copier from the nokia pc suit.
    after the update what ever i try it wont restore my data back to the phone...???? very infurating as you can imagine,
    anybody have a solution to this problem
    i use the 6.82.22.0 nokia pc suit version....
    cheers

    I hope that by now you have that problem solved.
    It is in fact infuriating. I've been there...
    And that is only one of the vast array of problems Nokia PC software brought me.
    However I recently reinstalled Nokia Nseries PC Suite latest version, and just out of curiosity I tried the backup and restore, and bingo, it worked fine.
    But as it was too good to be true, the included Nokia Music Manager refuses to run.
    Owning a splendid N95 8GB for 6 months now, I learned very early to use a 3rd party PC software...

  • Iphone Sim Card problems and updating and restoring problems

    I bought a iphone about 1 year ago and about 2 months ago i was not able to see any wifi connections in the area or connect to any even though i was sure that there was a wifi nearby and my fellow coleauges could connect to it with their iphone. I thought that this might have something to do with the "restrictions" so i went to turn the restrictions off but realised that it had a passcode that i had forgotten. I wasnt able to restore it within the iphone so i restored it from my computer. Once i had finished the iphone had a " connect to itunes " on the screen and it said that there was no sim car installed, even though there was. I tried cleaning the sim card and everything else, i tried connecting it to itunes but it just said no sim card installed. Now i cannot use my iphone or cant even activate it. I have also tried to restore it in recovery mode but ended up with the same problem. Please Help.! Thanks

    This forum is not a catch all problems one.
    It's dedicated to Pages.
    Ask in an iphone dedicated forum.
    Yvan KOENIG (VALLAURIS, France) mercredi 7 avril 2010 21:58:50

  • Restoring problem, Out of Free space

    OK, here is my problem.
    I am trying to restore from a backup and I get the following message:
    iTunes could not restore the iPhone "iPhone" because the backup could not be saved on the computer.
    Additionally my computer will say Low Disk Space:
    You are running on very low disk space on C:......
    The problem is when this first appeared I removed about 5GB worth of programs on my C drive and when I tried to restore the same problem again.
    I think that maybe when you try to restore it starts to put the information on your computer before transferring to IPhone. If that is correct, how can I delete those restores that didn't go through? (I.e. I had over 5GB of space at the start of the restore process and now I have zero space.) I think part of the problem is I have tried to restore like 6 times thus, taking up more and more space.
    Thanks in advance for the help, I am so frustrated right now. I tried looking up the answer myself online but had no luck.
    Tim

    AppleRunner1,
    Right Click Start> Click Explore> Find your iTunes folder, this should contain a folder labeled previous iPhone Back-ups, erase what you need to. But be careful if you erase the wrong one you could lose alot of your most recent data i.e. contacts apps and music.
    Hope this helps,
    Ryan

  • External hard drive, restore problem! Files are gone...?

    All the files are gone... but the folders are still there.
    Here is what happened:
    Step 1
    I restored everything from main HD (two disk striped RAID) to external hard disk (Western Digital MyBook 1TB ). The external disk was mac formated (Mac OS Extended - Journaled). Everything went just fine.
    Step 2
    I boot the computer from the exernal drive. That also went just fine.
    Step 3
    I create a new bigger RAID set from 4 internal disks.
    Step 4
    Restoring then from external drive (now the boot volume) to the new internal RAID set went horribly wrong! Restoration had stopped at some point during the night and resulted weird issues.
    Trying to boot the machine didn't work...
    Trying to boot from external drive didn't work...
    Trying to boot with option key down I got an HD icon called "EFI boot") which did not work...
    So, I connected the external drive to a different mac (also leopard 10.5.7) and all the restored files copied in step 1 were gone! All the folders were still in place but files like images and stuff totally gone. Get info from the drive gives also around 930 Gb of free space... So they don't waste any space either.
    What happened? How can I get my files back? Somehow I don't think they are deleted for good...
    I already tried repairing with Disk utility and Disk Warrior and installing the latest drivers from WD website...
    PS. Sorry for the language issues. English is not the native one for me...

    I've used time machine in the past and couldn't get to the bottom of the problem so I've recently downloaded and am using carbon copy cloner and I get the same problem. The files that are missing are just word and number documents. Seems so odd.
    Thanks for replying
    John

  • ITouch Get Stuck and after restore problem with hard disk

    some days before the stuck my iTouch begin to give me an error when i connect it to iTunes: the sync starting and when was time of backup it said that isn't possible to backup my iPod because it was disconnected (what?!?! it's plugged in and he see it a few second ago!!)
    Then the iTouch stop to run
    when i try to turn on it stay on the apple (for about 10 minute then it reboot himself with a white flash)
    i've tried to plug in but iTunes never see it
    So i try to put the iPod in DFU Mode...after a few attemps iTunes reveal it
    First i try with 3.1.2 (2 times) but it give me some error such as "memory unavailable"
    Then i have downloaded 3.1.3 and all goes well apart a little error on sync iTunes
    today i have put into 1400 contacts with itunes in sync with my company and now iTunes give me this error - I can't sync because memory disk was full
    if i go on my iPod -> Setting ->General -> Info -> Space Available -> 0 byte
    what file are included in this voice??
    how i can fix it??
    there was some problem with my hardware?
    thanks a lot

    Welcome to the discussions,
    if you connect your ipod to itunes and look at the colored info bar at the bottom of the window, does it show different colors or just one orange "other" part? As you got errors while syncing, there might be corrupt data files on your ipod filling it up. Try to restore again to get rid of the great orange part. After that the "other" section should be reduced to max. of 500MB or less.

  • From iPhone 4 to 5 backup restore problem.

    Today i've taken my new iPhone 5, but thing from traslate my backup from a iphone 4 to the new wasnt smoth like usual i explaine:
    1) I've done a backup of my iphone4 whit cable on iTunes Mac ( 1.8.2 ) last versione of itunes ofcorse.
    2) I've turned on the iphone 5 , started the first step and when it asked me if i want restore from iCloud , itunes, or new i've docked the iphone 5 to the Mac with the lighting cable with itunes open and click on restore from bacup.
    3) I've selected the just created backup from my iphone 4 and clicked next.
    At this poing reset and restore process started but and the end of that iphone 5 was complitly useles, stay on black screen, if i click on ON button apple appear and after few second turn off again.
    I'd to restore the phone with the DFU mode.
    Than i've tried again, and than iphone dead again.
    DFU again and restore.
    4) So i've tried another way. I do every night the iCloud backup of my iPhone 4 so i've tried to restore that backup and the process seems to stard correcty.
    5) After 15 minutes of gray screen and blue progressing bar, iphone turned on and show me the icon and the the application download process started.
    6) After 3-4 minutes i've receved a message that tell me that the restore proces is incomplete, but application continued to download and no missing data in contacts and mail.
    7) The download started very very very slow to download the watsapp app put something like 10 minutes, and TomTom was the next, so i've plugged the cable again and started the sycronization from the Mac. Everything goes fine, the apps was installed , it took a little long , but i've alot apps. But the sync process cant end. IT stuck on step 6.
    8) Tryed again and even if there is noting more to sync  ( i took few second ) it stuck always in the end of process.
    i'de a group o message in the iMessagge app tha make my phone crash istantly but solved delting it..
    Any advise of how to fix? I've chaged alot of iphoens and never had problem like this to restore my data.

    Be sure to backup your 4 to your computer. Then, sync the 5 using the back-up from the 4. Then backup the 5. You will get MOST ALL of your information. Some things like recently added apps didn't go to my 5, neither did some music, but when I synched with the computer via iTunes I THINK they all reappeared. HOWEVER, my ical on the computer and my phone have more information than my cloud calendar. I also have more contacts on my iphone than in the cloud. Be sure to back up your 5 before doing a cloud sync.....I spent 2 hours on technical support last night, and he is going to call me back for another hour to two, to migrate all my info. BE CAREFUL, and if you have any "special circumstances," call Apple support. If you aren't sure what to do it is worth the time, effort, and expense, if your free support has ended! Having more than one apple ID is a pain. (I had one from prior use of Mobile Me, and a different one for iTunes, so my info is in two places, and won't all sync to my phone!)

  • IPod touch 4th gen (restore problem, unknown error 9)

    So I was using an app on my iPod touch, but then suddenly the screen froze and turned white. Then it would shut off and get to the apple logo, then slowly fade out to all white and restart. This happened continuously and I couldn't get it to stop when I pressed the home and lock buttons.
    I've had this ipod for almost two months now. My last experience with my 3rd generation iPod touch, I had never come across a situation like this.
    Somehow I was able to get the screen to show the iTunes logo & the iPod USB pointing at it. I assume this is what you would call going into restore mode? I cannot get out of that screen no matter what I press.
    What's more disturbing is that when I inserted the USB cable from my iPod to my laptop, the info I get from iTunes shows "n/a" for the name, capacity, software version, and serial number. I have the latest iTunes installed
    I tried to restore it and went through the following steps over and over again, but I keep getting the same response, "The iPod 'iPod' could not be restored because of an unknown error (9)."
    - Extracting software
    - Verifying iPod restore with Apple
    - Preparing iPod for Restore (at this point the iPod turns off and back on for the next step, if I'm not mistaken)
    Once a progress bar shows up on my iPod touch screen, a few seconds later the screen turns white (freezes) and a notice from iTunes pops up with the response that I got an error and iPod could not be restored because of unknown error 9.
    I've tried this repeatedly so many times already, but I'm getting no luck on how this problem should be solved.
    Should I bring this to an Apple store for their help?

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • Disk utility restore problem: cannot drag internal hdd to destination field

    I'm currently trying to restore a time machine backup after my boot ssd recently failed, but am having trouble restoring the backup to my secondary internal drive in the optical bay. My set up isthe following:
    Failed ssd in primary hdd  bay of MacBook Pro (mid 2010)
    1tb secondary  hdd in optical drive bay with time machine backup of failed ssd.
    2tb external drive
    The following is what I have done so far...
    1. Booted into the secondary internal drive and restored the time machine backup onto the external USB drive.
    2. Booted from the restored backup on the USB drive (this now looks like my old computer again but is very slow as its USB 2.0)
    3. Partitioned the secondary internal drive in the optical bay.
    4. Now I want to copy the restored volume on my USB drive to the secondary internal drive in the optical bay.
    When I open disk utility's restore function I can put my original volum in the source field, however, it will not let me put either partition of my internal drive in the destination field. It has no problem putting other partitions from the USB drive in the destination field - just will not allow anything from the internal drive. Why is this?
    I'm thinking it could possibly be because it is in the optical drive bay and apple has prevented copying full volumes into this bay, but then again surely this would be needed when burning DVDs at some stage. Any ideas? Many thanks in advance for any help.

    I managed to complete the restore and you may have been right - I booted from the internal hdd then restored the time machine backup stored on the usb drive to a different partition on the internal hd. Seemed to work fine now running of the hd in the optical drive bay but has still crashed a couple of times which is pretty odd. Perhaps the failed ssd in the main drive bay is still causing a bit of a nuisance (it registers for the first 3 minutes after booting up then disappears). Also didnt notice the responsiveness too much when upgrading from hd to ssd, but going the other way back to hd - can definitely now tell the difference. Painfully slow at times! I need to get that ssd replaced I think.  Anyway thanks for your advice!

Maybe you are looking for

  • Problem with Business Graphic:

    Hi Everybody! I am working with a UI control Business Graphic in WebDynpro Java, I need to change the text of the legend, and is taking an automatic value, what is the property in the Chart Designer where I can adjust this? Thanks in advance for your

  • Can the Find iPhone app find devices that aren't mine?

    So my MacBook Pro was stolen a couple weeks ago out of my rental car while I was in Seattle, WA. I had iCloud on it synced with my iPhone, but never used it or saved anything to it. Someone told me that I could find my stolen computer though iCloud,

  • Adobe PSE 11 installer defaults to the "uninstall" routine.

         I'm trying to install PSE 11 from a downloaded < Adobe_PE11_T1.zip >.  Preferring a "clean" installation, first I uninstalled PSE 10 (Windows7 Control Panel / Programs); however, PSE 10's program folder did not delete.  So, I deleted it manually

  • Do not process BDC records that result in warnings

    Hi Experts, I have a BDC program to create absences.  When the result of the Call Transaction results in a warning, I do not want to process the record.  How can I do this BEFORE running the call transaction (since if I find out that there was a warn

  • Problems importing mpge 2 in fcp

    I can't import MPGE-2 files to FCPx, help me please