Restore database Error when restoring database to a new server

Hi folks,
I am oracle 10g on an AIX server (5.3).
I created an rman backup of a database. I then copied it over to a new server where I am trying to restore it (I just created the backup today). However, I am getting the error below.
Essentially, I used an initdb.ora file to create an instance of the database, and mounted it, on the new server. And then I ran a simple "restore database" command, the end of which is displayed below, with a "Restore complete. ..."
I have looked up this error (ora-01152) online and I cannot find a scenario which best provides me with a fix to my problem, about the file not being restored from a sufficiently old backup. Could any one help please?
piece handle=/ora_backup/prev_0/qconfig/dbf/QCONFIG_18_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_4: restore complete, elapsed time: 00:03:30
channel ORA_DISK_2: restored backup piece 1
piece handle=/ora_backup/prev_0/qconfig/dbf/QCONFIG_15_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_2: restore complete, elapsed time: 00:05:00
Finished restore at 14-JUN-10
RMAN> alter database open resetlogs;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 06/14/2010 17:48:12
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '+DGROUP1/testdb/datafile/system.751.721679898'Edited by: efachim2 on Jun 15, 2010 2:19 AM

I ran only as below because I copied over the backup right after it finished, when there were no archivelogs.
RMAN> restore database;
Starting restore at 14-JUN-10
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=651 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=650 devtype=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: sid=649 devtype=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: sid=648 devtype=DISK
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00002 to +DGROUP1/testdb/datafile/undots1.667.721227421
channel ORA_DISK_1: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_16_1_721669501_2010_06_14_15:44_Mon_full
channel ORA_DISK_2: starting datafile backupset restore
channel ORA_DISK_2: specifying datafile(s) to restore from backup set
restoring datafile 00007 to +DGROUP1/testdb/datafile/a1_x.641.721227553
restoring datafile 00009 to +DGROUP1/testdb/datafile/ent_sm01_x.659.721227557
restoring datafile 00013 to +DGROUP1/testdb/datafile/in01_x.657.721227569
restoring datafile 00015 to +DGROUP1/testdb/datafile/cs01_x.656.721227571
restoring datafile 00016 to +DGROUP1/testdb/datafile/cs01_d.650.721227559
restoring datafile 00021 to +DGROUP1/testdb/datafile/h01_x.644.721227575
restoring datafile 00023 to +DGROUP1/testdb/datafile/doc01_x.647.721227575
restoring datafile 00025 to +DGROUP1/testdb/datafile/og01_x.645.721227577
channel ORA_DISK_2: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_19_1_721669509_2010_06_14_15:44_Mon_full
channel ORA_DISK_3: starting datafile backupset restore
channel ORA_DISK_3: specifying datafile(s) to restore from backup set
restoring datafile 00003 to +DGROUP1/testdb/datafile/sysaux.662.721227423
restoring datafile 00006 to +DGROUP1/testdb/datafile/a01_d.639.721227549
restoring datafile 00010 to +DGROUP1/testdb/datafile/ent_lg01_d.666.721227423
restoring datafile 00012 to +DGROUP1/testdb/datafile/in01_d.658.721227511
restoring datafile 00014 to +DGROUP1/testdb/datafile/cs01_d.661.721227521
restoring datafile 00019 to +DGROUP1/testdb/datafile/ndata_x.654.721227423
restoring datafile 00022 to +DGROUP1/testdb/datafile/doc_01_d.660.721227531
restoring datafile 00029 to +DGROUP1/testdb/datafile/in01_x.642.721227471
channel ORA_DISK_3: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_17_1_721669501_2010_06_14_15:44_Mon_full
channel ORA_DISK_4: starting datafile backupset restore
channel ORA_DISK_4: specifying datafile(s) to restore from backup set
restoring datafile 00001 to +DGROUP1/testdb/datafile/system.655.721227423
restoring datafile 00004 to +DGROUP1/testdb/datafile/users.653.721227453
restoring datafile 00005 to +DGROUP1/testdb/datafile/tools.663.721227423
restoring datafile 00008 to +DGROUP1/testdb/datafile/en_sm01_d.665.721227473
restoring datafile 00018 to +DGROUP1/testdb/datafile/n_data_d.664.721227423
restoring datafile 00020 to +DGROUP1/testdb/datafile/hfig01_d.652.721227527
restoring datafile 00024 to +DGROUP1/testdb/datafile/og01_d.651.721227535
restoring datafile 00028 to +DGROUP1/testdb/datafile/in1_d.646.721227469
channel ORA_DISK_4: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_18_1_721669501_2010_06_14_15:44_Mon_full
channel ORA_DISK_2: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_19_1_721669509_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_2: restore complete, elapsed time: 00:00:27
channel ORA_DISK_2: starting datafile backupset restore
channel ORA_DISK_2: specifying datafile(s) to restore from backup set
restoring datafile 00017 to +DGROUP1/testdb/datafile/cs_lg01_x.640.721227579
restoring datafile 00026 to +DGROUP1/testdb/datafile/am1_d.643.721227581
restoring datafile 00027 to +DGROUP1/testdb/datafile/am1_x.671.721227581
channel ORA_DISK_2: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_20_1_721669624_2010_06_14_15:44_Mon_full
channel ORA_DISK_2: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_20_1_721669624_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_2: restore complete, elapsed time: 00:00:07
channel ORA_DISK_2: starting datafile backupset restore
channel ORA_DISK_2: specifying datafile(s) to restore from backup set
restoring datafile 00011 to +DGROUP1/testdb/datafile/ent_lg01_x.648.721227421
channel ORA_DISK_2: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_15_1_721669501_2010_06_14_15:44_Mon_full
channel ORA_DISK_1: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_16_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_1: restore complete, elapsed time: 00:02:30
channel ORA_DISK_3: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_17_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_3: restore complete, elapsed time: 00:03:15
channel ORA_DISK_4: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_18_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_4: restore complete, elapsed time: 00:03:30
channel ORA_DISK_2: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_15_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_2: restore complete, elapsed time: 00:05:00
Finished restore at 14-JUN-10
RMAN> alter database open resetlogs;

Similar Messages

I get an error when restoring my ipad to factory setting

I get an error when restoring my ipad to factory setting

What does the error say?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Error number 207 error type SPECIFIC_CODE IMPORT ABAP phase error when install database instance

IMPORT ABAP phase error when install database instance
Error number 207 error type SPECIFIC_CODE.
In phase "Import ABAP" the installation halts with error. Can anyone please tell me what error should I search for and (possibly) what is the solution?
Thanks in advance
synxcaccmg.cpp: 133: PSyUser CSyAccountMgtImpl::getUser(iastring sNameOrSID) const
syxxccache.cpp: 267: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false)
syxxccache.cpp: 276: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false, ISyProgressObserver* )
synxcuser.cpp: 119: CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="IboSap-PC\nspadm" does not exist.
Failed action: with parameters
Error number 207 error type SPECIFIC_CODE

It is not easy, really , it has taken many hours and at the End I got the problems,.
so I have decided to pay 20 $ every month, and I can get an access IDES to SAP, ERP, ABAP.
without any problem. In ABAP, I have only Sflight ,SBOOK etc. but MARA, and others tables, dont exist, .
I know, some students have not enough money, so what can we do? every one get problem with installaion and others after installaion, with server, 3 days work, and NSP becomes RED. Yellow, etc.
anyway. thank you for all.
Best Regards.

Database error when updating table ADRC

Hi,
We are on ECC 5.0 & are facing a problem whille maintaining anything relevant to table ADRC.
For eg., if we try to maintain storage location or create a vendor code (XK01), for some inputs it works ...but most times the update just terminates with a message "Database error when changing table ADRC".
Pls. help.
Thanks,
Saba.

Hi
You can refer to following SAP Notes in case they help:
385440   Repairing inconsistencies in Customizing addresses
417809    Customizing objects display incorrect addresses
186910    Customers / vendors with incorrect address
Otherwise i want to know more about the error you are getting to help you in better way.
Thanks and Regards
Esha Rajpal

Hello sir i have an error when restore occurred 2

hello sir i have an error when restore occurred 2 plz sir help me urgent

santoshchd wrote:
hello sir i have an error when restore occurred 2 plz sir help me urgent
More Details are required...
What are you trying to Restore and to what Device and what Exactly is the Error message / Alert you are getting...?

I upgrade my iPhone 4 to iOS 7, but cannot restore the backup "error when restoring iPhone (-1)", anyone know what should I do?

I upgrade my iPhone 4 to iOS 7, but cannot restore the backup "error when restoring iPhone (-1)", anyone know what should I do?

That error often indicates a hardware failure.Try restoring a few more times. If it consistently gives you that error, make an appointment at the genius bar to have it looked at.

BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon

Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.

Whether your problem is solved?
We have the same problem in BO Mobile.
Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds.

Database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2) on mac os x 10.9.2

Dear Fellas:
I received "database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2)" on mac os x 10.9.2.
mysql info:
ps -ef | grep mysql
    0    66     1   0 11:06AM ??         0:00.04 /bin/sh /usr/local/mysql/bin/mysqld_safe --user=mysql
   74   225    66   0 11:06AM ??         0:02.50 /usr/local/mysql/bin/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --plugin-dir=/usr/local/mysql/lib/plugin --user=mysql --log-error=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.err --pid-file=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.pid --socket=/var/run/mysqld/mysqld.sock
501   952   947   0 3:52PM ttys000    0:00.00 grep mysql
Please help!!

Fascinated and guessing:
Something related to sock(2) because that's not part of your copied info. I'm thinking you've doubled up on sockets and the second socket doesn't exist, meaning you should be connecting to the first socket "mysqld.sock" whether automatic or not.
I've only used GUI tools on purpose, so does this mean you've already got MySQL running and you tried to launch it again manually? Perhaps you already have one instance of a db and you're trying to launch a second instance, and the two can't coexist with a single user local db?
Assuming this is all local, I'd shut down the db service and restart it, out of hand. I've seen similar messages when I set the db to start up on boot, and it didn't finish shutting down when I tried to restart it manually. Usually the GUI won't let me turn it on because it reports it's already running, but in that case it hadn't finished performing what the GUI was reporting.
Just speculating.

A Database error occured The database error text (CS) "Error on BindColwis

Hi All
msql analysis services Cube is source and based on this cubes universe is bult and when trying to referesh the reports in webi its giving error as
When I m refereshing the reports, Im getting the problem at refreshing time as
" A Database error occured The database error text (CS) "Error on BindCol wis (10901) msg its displaying.
Thanks in advance
Raj

Hi,
Just change your database connection from OLEDB to ODBC and you should be all set.
Good Luck.

Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

I'm trying to migrate a Sql Server 2k database to an Oracle 8i schema using OMWB. After using BCP to collect metadata information on the source database, I tried to capture the source data model and got a "Capture aborted" message on the progress screen (even though then it appears a dialog window reporting "0 errors and 0 warnings", funny!). Down there is the error log OMWB generated. After reading some posts, I changed some columns of the OMWB dictionary that holds the source database name, but still got the same error. If someone can enlighten me on this toppic, I'd greatly appreciated it.
Here's the error log of OMWB:
** Oracle Migration Workbench
** Production
** ( Build 20050629 )
** OMWB_HOME: D:\Datos\Download\Oracle\Oracle Migration Workbench\omwb
** user language: es
** user region: null
** user timezone:
** file encoding: Cp1252
** java version: 1.4.2_04
** java vendor: Sun Microsystems Inc.
** o.s. arch: x86
** o.s. name: Windows 2000
** o.s. version: 5.0
** Classpath:
..\lib\boot.jar
** Started : Fri Feb 23 17:18:48 GMT-03:00 2007
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
Repository Connection URL: jdbc:oracle:thin:@ServerCms:1521:sigcewbc
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 2000 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 6.5 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 7.0 Plugin, Production Release 10.1.0.4.0
** Active Plugin : SQLServer2K
EXCEPTION :SQLServer2KDisconnSourceModelLoad.loadSourceModel(): oracle.mtg.migration.MigrationStopException: java.lang.IndexOutOfBoundsException: Index: 15, Size: 15
** Shutdown : Fri Feb 23 18:00:50 GMT-03:00 2007

Duplicate thread
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

Do the update using iTunes on your computer.
Plug your iPhone into iTunes (current version), let it sync, then click "Check for Updates" on the iPhone's summary page in iTunes.

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

Solution:
Open Disk Utility.
Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive.

Error when login and authorizing my new computor

error when login and authorizing my new computor

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

Get the following error when trying to add a new user - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

Get the following error when trying to add a new user on Mac OS Server 10.5 - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

How come Leopard let me use the WGM in standard mode?
While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
Yes.

Why does it say "unknown error" when I try to purchase new episodes for the walking dead game?? :(

Why does it say "unknown error" when I try to purchase new episodes for the walking dead game?? I have all of billing info up to date, changed my password etc etc and still get an "unknown error" message. Help!

- Try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Store and sign out and then sign back in.

Restore database Error when restoring database to a new server

Similar Messages

Maybe you are looking for