Restore External Drive From Time Capsule

For reasons that I won't bore you with, I needed to perform a complete restore of of my MacBook Pro. My Time Capsule has been backing up the 'Pro's HD and a single external HD. Folowwing the instructions (boot from Snow Leopard install disk, run updates and select migrate from Time Machine, everything worked out perfectly, plus I have a clean system. However, the external drive was not restored. It's where my music and photos are stored (although I do have off DVD back-ups as a fall back plan). I cannot enter Time Machine. I get the message that "Your Time Machine backup disk can't be found. I can see it in the finder sidebar Shared>"name" Time Machine>Frank MacBook Pro 00264....sparsebundle.
Is there a method to get my Time Machine Back ups back. I'm guessing the problem is related to the newly installed OS. Thanks in advance for any help.

Start with a "full reset" of Time Machine, per #A4 in Time Machine - Troubleshooting.
If that doesn't work, try the +*Browse ...+* option, per #E2 there.
The full system restore, starting with your Install disc, only restores volumes with OSX mounted.
To restore a data-only volume, use the normal "Star Wars" display. See #15 in Time Machine - Frequently Asked Questions, especially the notes below the second screen sample.
If the original drive is no longer connected, you'll need the procedure in #E3 of Troubleshooting to locate the backups, and restore to an alternate location (the replacement drive -- even if it has the same name as the original, OSX knows it's a different one).

Similar Messages

Restore To new hard drive from time capsule stalls at opening time mach

I installed new hard drive on 2008 imac that had mavericks. When boot command R to restore from time capsule the process finds the time machine disk but then gets stuck during the "opening time machine backup" step. Does this mean my time machine backup is corrupted? Ive tried 3 times with same result. Any ideas on what else i can try? Could i use migration assistant to recover pieces?

Ok first you give the information that you have a 2008 iMac with Iphone operating system of IOS-7.. What is on the iMac. If you don't have OSX 10.6.8 You cant Install Mavericks. So tell us what you have and then we can help.
Don

Error restoring thunderbolt ssd from time capsule

I have a thunderbold sad that is bootable. This drive is backed up to my time capsule. I boot off the sad holding down the command-r keys. I select the time capsule restore option. I select a valid backup and restore to the ssd. Before I can get to 8% restored the restore hangs ant the time remaining starts increasing then errors out with unable to write files. From everything I have read this should not be a problem. Many others have done the same. The ssd is my work drive and time capsule is my backup. Can anybody help?

Same problem here, but I am restoring 211.73 GB. It has been going for about 36 hours and claims that it has 52 hours to go. Egad.
I've got the computer connected to the TC via ethernet and the restore is going into a USB 2.0-connected external drive, so the bottleneck should not be in the capacity of those connections. Nothing very CPU intensive is happening on the machine.
Is there some faster way to do this? I'd happily plug a USB drive right into the TC and copy the data off that way – is there some way to do that?

Time Machine won't back up external drive to Time Capsule

I recently got a Time Capsule, and successfully set it up to back up my iMac's primary drive, but for some reason Time Machine won't back up my external drive to the Time Capsule.
I removed the external drive from the exclusion list in System Preferences > Time Machine > Options, and from what I've read this should be sufficient to make Time Machine back up the drive.
The external drive is connected to my iMac via Thunderbolt > Thunderbolt-to-Firewire adaptor > Firewire 800 input, and the Time Capsule is connected via Ethernet to my LAN.
Since I'm using Ethernet, I've disabled Wi-Fi on the Time Capusule by going to AirPort Utility > My Time Capsule > Edit > Wireless > Network Mode > Off.
The reason I believe the external drive is not being backed up is because when I click the Time Machine icon in the upper-right status bar and choose "Enter Time Machine", none of the folders on external drive show any older versions.
Furthermore, when I click Finder > Time Machine Backups > Backups.backupdb, I can see only one sub-folder which has the name of my iMac's primary drive. I can't see any equivalent folder for my external drive.
Any idea what I'm doing wrong?

I don't see anything you have done wrong.. perhaps it does backup in a different way.
Load the widget.. A1 here... http://pondini.org/TM/Troubleshooting.html
That will allow you to track the log of TM to see what it is doing.
I would also try rebooting the computer.. exclude the drive again.. reboot.. and remove the exclusion.
You should be able to check the actual settings of TM in plist file.
And you can do a full reset of TM as well.. See A4. Check what is in the file. Pondini lists the location for you.
Nothing surprises me with Mountain Lion ...!!

Recognizing Time machine files after moving external drive to time capsule

I have a LaCie external hard drive that contains my time machine backups, and would like to attach it to my time capsule (in the basement) to free up desk and usb space. When I attach it to the capsule the drive is recognized, but it does not recognize the backup files. As it stands if I select the drive from time machine it will start to back up all over again using only the remaining space on the drive.
My options are to reformat the drive and start over, losing my previous backups, or I can find a way for time machine to recognize the existing files on that drive. Does anybody know a way to do this?
Any advice would be appreciated:)

Network backups are in a different format than local backups. The network backups are contained in a disk image. Although it's theoretically possible to copy the existing backup folder to that image, I wouldn't give much for your chances of success.
A much better plan would be to keep the drive as it is, continuing to use it for local backups at least intermittently, and start a new backup on another drive. You need more than one backup to be safe anyway.

How to restore mail files from Time Capsule onto a different machine?

My Macbook Pro hard drive crashed, and I want to restore my backed-up mail files from Time Capsule onto my Desktop Mac (iMac 27"). When I try to restore by opening Time Capsule with Mail already open, I can only see the current mail files on the iMac (not the backed up files on the MacBook Pro), even when I point to the MacBook Pro backup file.

Hello there, AngryMario.
The following Knowledge Base article offers up how to restore mailboxes and content using Time Machine:
Mail (Mountain Lion): Restore mailboxes and their content
http://support.apple.com/kb/PH11713
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to restore macbook pro from time capsule machine backup

ow do I restore my MacBook Pro from time capsule machine as hard drive was crashing and replaced with new hard drive.

OS X Yosemite: Recover your entire system
To follow the instructions, you'll need to start up either from Internet Recovery or from your installation disc, depending on the model.

Use external drive for Time Capsule backups AND file storage?

I have an external drive formatted by my MBP. I'm using it to store my iTunes music library and iPhoto pics. Can I use the drive for Time Capsule backups as well?

Yes, but that is not recommended. Storage and backup should be kept separate to reduce the chances of a disk failure. This is especially important because you cannot even partition a Time Capsule drive. Go get a separate drive for your storage needs. Get another drive for a second backup and use a different method of backup than Time Machine

How can I restore my iPhone from time capsule (OSX and ios5)?

How can I restore my iphone (ios5) from time capsule (OSX).

So much got deleted... how can I get it backk????

How to remove an external drive from time machine backup

In time machine I also backup to an external drive. I recently bought a new external drive and thats working fine. However, it still wants to backup to my previous drive which I dont want to use. In time machine preferences I see the old and new drive listed. Both are greyed out so I cannot deselect the older drive.
Suggestions?

mhattonmd wrote:
So when I open time machine preferences I see time machine and both external drives listed. If I click on options I see both external drives but I cant select either as they are both greyed out.
If you see them both listed on the initial screen of TM prefs, they are both selected as backup drives. They are not being backed up. They are being used by Time Machine as a destination. You need to use “Select Disk…” to remove the external drives from the destination drives. Select Disk does not choose the drives you want to back up. It chooses the drives you wan to back up to.

How do I restore iPhoto library from time capsule?

My iPhoto library has blank events whre there have been photos, how can I restore from time capsule from a date and time I know all was well?

Here's a screenshot of what Larry is describing:
OT

Restoring hard drive from Time Machine

I was having trouble starting up my computer, the gray screen with question mark was appearing over and over after other attempts to correct it I reinstalled the start up disk and then restored my files from Time Machine. Everything seemed fine for a day then my computer was freezing up again and grey screen with question mark appeared again. Is it time to go to the apple techs? Any help would be very much appreciated!
Thanks,
Cindy

Cindy 2 wrote:
I did as you suggested and my computer is running but Time machine will not back up. I tried to verify disk and got an error: filesytem verify or repair failed also incorrect number of extended attributes. Do I need to reformat it somehow?
This is for your internal HD, right?
If so, you need to repair the file system, as that can cause various other problems. Insert your Leopard Install disc and start up while holding down the "C" key. This will take a few moments. Select your language, then on the next screen select Utilities from the menubar, then +Disk Utility.+ Use that to +Repair Disk+ (not permissions) on your internal HD.
Most likely, all the errors will be repaired. If not, run it again. If they still don't repair, you've got a more serious problem.
Then reboot normally.
Do a +Repair Disk+ on your Time Machine disk (you can use the version of DU in your Applications/Utilities folder for this one) to be sure there isn't trouble there, too.
Then try a +Back Up Now.+ If it fails, download the +Time Machine Buddy+ widget from: http://www.apple.com/downloads/dashboard/status/timemachinebuddy.html. It shows the messages from your logs for one TM backup run at a time, in a small window. Copy and post the messages here (be sure to get them all, as sometimes they overflow the small window).
My partition map scheme reads guid partition table, is this correct?
I don't know, since you still haven't specified what kind of Mac you have in your profile. But if your internal HD is GUID you must have an Intel Mac, and it's correct.

How to Restore Data Deleted from Time Capsule Hard Drive

This question is more about the time capsule in general as opposed to a specific time machine issue.
I'm using my time capsule as an external hard drive that I can access wirelessly and I have accidentally deleted a folder. It didn't go into the trash can on the computer I used to delete the file from my TC, it just disappeared. I have data recovery software (Data Rescue III) but it is unable to locate the TC since it is not a plugged in device. I've tried connecting my computer to the TC via wireless, ethernet, and usb but Data Rescue still won't detect the TC.
How can I get the files back? Is there a way to restore files deleted from the TC when it's being used as a hard drive (not as a time machine for backups)?
THANKS!!!
Message was edited by: jenniex
Message was edited by: jenniex

There is only one USB port on the back of the Time Capsule, and AFAICT from reading Apple's documentation, the only uses for that port are to connect an external hard drive or printer. You could try connecting that port to your Mac directly via USB cable, but nothing I can find indicates it would work, and you would be solely responsible if it somehow damaged either device (which may or may not even be a possible side effect).
Unfortunately, if connecting the Mac to the Time Capsule via USB does not work, you're probably out of luck. Unless you are willing to crack open the Time Capsule, remove the hard drive and put it in an external enclosure so you can access it with Data Rescue, your data will remain lost. Note for the future that you absolutely *should not ever* keep original, un-backed-up data on a backup drive. It's poor organization and dangerous to boot.

Restoring new hard drive from time capsule

I am attempting to restore my new macbook pro hard drive from my time capsule. I follow the prompts at start up and select "from time machine or other disk" when I get to the "transfer infromation to this mac" screen. the next screen says "select source" it shows the picture of a time capsule, which is not selectable. When I click "conitnue" i get the spining circle and "looking for other computers..." it never goes any further. I was able to connect to the time capsule from another computer, so, I assume it working---don't know what else to do

Try this:
Drive Preparation and Installation for Lion/Mountain Lion
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting is done quit DU and return to the main menu. You can now select the option to restore from a Time Machine backup, then click on the Continue button.

Restore to New Hard Drive from Time Capsule

I replaced the hard drive on my Macbook Pro and now want to restore my Time Machine Backup to the new drive. The backup is on a Time Capsule connected via airport. If I choose to boot from an OSX install disk (without installing), and then go into utilities/restore system from backup it does not find the time capsule. So do I need to first install OSX before I can try to restore from the backup?

You shouldn't have to install OSX.
Connect to the Time Capsule via Ethernet if at all possible; it will be 2-3 times faster than even a good WIFI connection. Your backups may be found that way.
And be sure to use a Snow Leopard Install disc, not a Leopard one.
If the backups still aren't recognized, you'll have to install OSX. Then set up a temporary Admin account (different from any on your backups), and repair your backups, per #A5 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
Then use +Migration Assistant+ to transfer your apps, users, and data, per [Using Migration Assistant|http://web.me.com/pondini/AppleTips/Migrate.html]. When your system reboots, you'll need to download and install the "combo" update to get back to the version of OSX you were running on. If that's 10.6.4, Info and download available at: http://support.apple.com/kb/DL1048 If it's 10.6.5: http://support.apple.com/kb/DL1324 Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.

Restore External Drive From Time Capsule

Similar Messages

Maybe you are looking for