Restore file un openable

I recently had to back up and restore my HP Pavilion dv-6 after rebooting, installing operating system ETC. I ran the backup and in placed a backup folder on the desk top that contains all of my documents from before the crash. The problem is that I cannot open  any of them because Either I do not have "permissions" or "they are in use by another computer" I have tried editing the security settings and permissions on the files, folders, and documents to no avail. Any ideas?

Hi ngeoym,
Try moving the folder out of the Desktop into a different folder, maybe My Documents...  The Desktop is just a folder, but it's a weird folder and things misbehave in the Desktop sometimes.
Make sure you Own the folder.  You may have to "take ownership" of the folder before you can do much with it. 
Instead of dealing with folders that are Either "in use by" OR "have permission" issues, consider dealing with the master folder and solving the main issue at one time.  Once you solve the ownership and permission issue on the main folder, the rest of the sub-folders will fall into line.  No use in trying to pry open stubborn bits when you know the master folder is locked.
You must have admin rights to do this - so you have to be running in an account that has admin rights.
If this fails in "regular" boot mode, consider booting into "safe mode".
It is my pleasure to assist.
Say “Thanks!” by clicking the Kudos Star to show your appreciation for the help.
Fixed?  Mark this Post “Accept as Solution” to help others find the answers.
Note: You can find “Accept as Solution” only on threads started by you.
Kind Regards,
Dragon-Fur

Similar Messages

  • Cannot delete exe files - The action can't be completed because the file is open in Windows Explorer

    We have received 3 new computers with Windows 8.1. All of us 3 have the same problem: we cannot delete exe files with message "The action can't be completed because the file is open in Windows Explorer"
    For example, I download skypeinstall.exe on desktop, install the program correctly and then try to delete the file: file is in use by Windows Explorer, cannot be delete.
    We reboot computer, we are able to delete the file. But, if I restore the file from the recycle bin on the desktop, I cannot delete it again until I reboot the PC. I used ProcessExplorer to see what is locking it and I can see 5 instances of explorer.exe
    locking the file.
    I can always reproduce the same way:
    1-Reboot
    2-Delete exe file
    3-Restore file
    4-Delete stop working and 5 explorer.exe handle are locking it.
    I have tried the following so far after reading multiple threads:
    - De-activating Windows Search service
    - Activating User Experience service
    - Deleting from command prompt (no success)
    - In folder options: inactivate display icon on thumbnail and activate always display icons, never thumbnail
    - Changing folder view (contents, detail, small icons...)
    - Using Lock Hunter - not working until reboot
    None of these worked.
    We all have Windows 8.1 with Crucial SSD drive, could the problem be linked with the SSD drive incompatibility?
    Any help would be appreciated.

    Hi,
    Please try to make a clean boot for your system, then check if this problem resolved.
    Clean Boot: http://support.microsoft.com/kb/929135
    If problem persists, try to open Resource Monitor to check handle of Explorer.exe, if there any exception, end them for test.
    Roger Lu
    TechNet Community Support

  • Time Machine on Mavericks: restore file doesn't work

    I've successfully located a file I need to restore from Time Machine backup by doing a Finder search for the filename (something.graffle, an OmniGraffle document), and when 0 items are found, I "Enter Time Machine..." and use the back arrow or click on a date some months ago. This process finds two copies of something.graffle, and I can select these and Copy them, or I can select them and click Restore. Neither, however, works. When I try Copy, then Cancel out of Time Machine, there is nothing to Paste. When I try Restore, the image of the item glides to the present-day folder and is present for a moment in the present-day Finder window after Time Machine closes, but it instantly disappears, and Find once again cannot find it.
    My Time Machine backup is on an external disk connected by Firewire.
    I found some other threads mentioning a bug with dual displays, so I already tried disconnecting my external displays--it didn't help. Seems to be a different problem.
    Any ideas?

    I solved this problem, which also appears on this thread: time machine can't restore files
    The solution, for me, was to open the folder that I thought probably had the file. I knew it was probably in one of my two ~/Documents/OmniPresence folders, and in fact it was in a sub-sub-folder of OmniPresence, i.e. ~/Documents/OmniPresence/workfiles/stencils/something.graffle. This time doing the search produced 0 items, I entered Time Machine, went back to the earlier date where I'd seen it before but been unable to restore, and again Time Machine showed me two copies of the file. But this time, the files had their proper OmniGraffle document icons, and the context menus showed Restore options that hadn't been present earlier. I used Restore this file to… and successfully brought it into my presentday OmniPresence folder. From there I moved it into the workfiles/ subfolder where it belonged.
    I hope this helps others.

  • Restoring files from time machine backup made using Mountain Lion

    Hi Guys
    I have trawled through the Internet and found many sources of help for some of my headaches but still can't help the problem. So here I am.....
    I have an early MacBook Pro 13" that came with snow leopard. I immediately updated to lion which was a disaster being so slow etc. Then I upgraded to mountain lion which was pretty good. I always upgraded and never clean installed.
    I have been running time machine on a Qnap nas (model 212) which I must add has been a headache to get going in itself.
    Anyways I recently upgraded to mavericks which made my MacBook grind to a halt. I mean even the beachball was struggling. To the point after 2 weeks I couldn't get anything done on it!
    So I decided to do a clean install.  Did that and then tried to do restore files using migration assistant at first log in. Turns out my back is corrupted!
    Now I know I have a good complete backup of my mountain lion system just 2 weeks old on my nas. Only problem is that mavericks won't let me get to that when I try to upgrade from that drive as it just says no OSX backup available.
    Now I am trying to install snow leopard cleanly and the try and upgrade to mountain lion hoping that it would recognise the mountain lion backup on my nas.
    Can you please let me know if I am going in the right direction?
    Any help appreciated guys.
    Thanks

    Everything since the fresh install, has to be done manually from my Backup drive. Wasn't, or isn't TM supposed to do that automatically (for example restoring iTunes, is it supposed to restore just the application or all the folders with it as well?). Why, when I select a folder with many subfolders in it (and eventually the files I want within) does it say that the original whatever doesn't exist anymore at that location, then I have the option to choose a new location or to recreate the enclosing folders? I Click on recreate but when I do, just the top level shows (the first folder, for example, garageband). No more folders are shown inside, despite there being plenty of files in my backup version. Am I misunderstanding TM's powers/capabilities here? Is it supposed to be this frustrating and difficult?
    Everything that I want has to be done manually it seems. I don't understand it. The other thing is that it denies me access (I don't have the privileges or whatever it says) to move the files directly via the mounted disk on the desktop rather than entering TM. So, I can't go into TM and click restore, I can't manually open the mounted drive and drag files (denies me permission). The only way I've been able to do anything successfully is to archive the **** folder/s or files.
    Any help or direction, or a manual on how to use or tutorial on Time machine would be great. Someone point me in the right direction please, this is highly annoying and I am debating switching back to Leopard (having issues with iChat in Snow Leopard).
    Thanks

  • PDF File not opening in browser for sharepoint 2010

    Recently we have moved our web application from one server to another in Sharepoint 2010. Back up of entire web application was taken and restored in another server. But in the new server , the PDF files in the document library is not getting opened in browser.
    it always open in browser
    I have already made following changes but didn,t work
    Set browser file handling to Permissive from central admin
    Set "open in browser" in setting s of doc library
    Set the doc library file handling property using $docLib = $web.lists["Your Document Library Title"] $docLib.BrowserFileHandling = "Permissive" $docLib.Update()
    Added "AllowedInlineDownloadedMimeType.Add("Application/Pdf") in web app
    Installed Adober eader in client machine
    Even after trying all these, the PDF files are still opening in Client application(Adobe reader) but not in the browser
    It would have been great help if anybody provide a solution for this. I have been banging head on this for two days

    It would be handy if you didn't double post too.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/81ed0362-4033-4a31-b265-c1aba43c3d14/pdf-file-not-opening-in-browser-for-sharepoint-2010?forum=sharepointadminprevious
    To answer your question, you've tried most things that I normally see working, but there may be an extra solution here for you.  The solution 2 Powershell that deals with updating the Inline MimeType may help.
    http://www.pdfshareforms.com/sharepoint-2010-and-pdf-integration-series-part-1/
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • I've installed LR on my new Mac - How do I find/what is the name of the file that opens to bring up my existing photos (on my external hd)?

    I've installed LR on my new Mac - How do I find/what is the name of the file that opens to bring up my existing photos (on my external hd)?

    Bookmarks and history are stored together in your profile folder in a database file named places.sqlite. These articles should help with restoring as much or as little of your other profile as you like:
    Locating the folder: [https://support.mozilla.com/en-US/kb/Profiles Profiles | How to | Firefox Help]
    The following article has suggestions for recovering bookmarks: [http://support.mozilla.com/en-US/kb/Lost%20Bookmarks Lost Bookmarks | Troubleshooting | Firefox Help].
    To move more settings, see: [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
    Hope this helps.

  • Restore Files From an Old Time Machine Disk

    Please forgive and send me a link if someone has already answered this but I need to restore files from an old Time Machine Volume to my current desktop.
    How do I do this?

    control-click on TM in the dock and choose "browse other TM disks". choose your old TM backup to browse and restore what you need. also, you can always open your TM drive in finder and copy what you need directly via finder.

  • How can I restore files from a time machine back-up of my iMac to an EXTERNAL hard drive connected to MacBook Pro. Using Migrat

    I would like to restore files from a time machine back-up of my iMac to an EXTERNAL hard drive connected to MacBook Pro. When I tried using Migration Assistant it only gives me my internal hard drive as an option to restore to. The internal hard drive on my macbook isnt large enough to store the files.

    Welcome to Apple Support Communities
    OS X can only restore data to the drive where Time Machine backed up files from.
    If you want to restore files from the Time Machine backup onto an external drive, your only option is to access to the Time Machine drive manually (open a Finder window and choose your Time Machine drive in the Finder sidebar), navigate through its folders and copy the files you want to the external drive

  • How to restore files without TIme Machine

    Help! Anyone know how to restore files on tiger? I lost my WHOLE library of photos! And I don't have back ups. :'(
    I was running short of disk space, so I decided to clean up some unnecessary files on my disk. I once imported all my photos from iPhoto to Aperture. Since I usually use iPhoto, I decided to delete all the photos from Aperture library. But the next time when I opened my iPhoto, I found the photos in iPhoto library were also deleted!!! Now there are only thumbnails of all the photos!
    Please! Anyone know how to restore the photos on Tiger? I can't afford to lose all my photos. :'(

    Try Subrosasoft's FileSalvage.
    If that doesn't work try Prosoft Data Rescue II
    If that doesn't work, take it to a professional such as http://www.drivesavers.com/
    And in the future always keep backing up your data as my FAQ* explains:
    http://www.macmaps.com/backup.html
    - * Links to my pages may give me compensation.

  • Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

    Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

    Ok this is bizzare!
    Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
    So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
    AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
    I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

  • How to restore files from Time Machine after Clean Install of Mavericks

    How to restore files from Time Machine after Clean Install of Mavericks. I know the data is there but seems unaccessable because I may have changed the Computer or Owner name. Is there any way to fix that now?

    Hi Linc,
    my back-up data is managed by Time Machine; the actual data is on a second internal Hard Drive with a capacity of 1TB - not partitioned. I am using Time Machine and have access to all data backed up since Mavericks Clean Install but not the data prior to this date.
    When I open the 1TB drive in Finder I can see a folder "Backups.backupdb/Sigi's Mac Pro/ followed by many folders of backup dates going back to 2010-09-20-103441 and up to 2014-02-07-142414 all followed with folder Macintosh HD.  February 7th  2014 was the date of the clean install.
    These Backups are followed by backup date folder 2014-02-08-075554 with a subfolder of MacPro-320GB (this is the name I assigned to my Boot Drive during formatting; I suspect I should have assigned the same name as before ie. Macintosh HD) and 2014-02-11 with a subfolder Macintosh HD, these are the ones I get access to by way of Time Machine > Restore.
    Weird thing is on Febr 11 when I relised my possible mistake and renamed the Bootdrive back to what it was initially ie. Macintosh HD despite this I have access to all backup data since the Clean Install in both folders MacPro-320GB as well as Macintosh HD but not to any data prior to the Clean Install.
    Is there something that Time Machine knows and prevents access or is it simply a matter of renaming the subfolder 2014-02-08-07554/MacPro-320GB to ........./Macintosh HD?
    I like to restore selectively and not everything - It was hard work reinstalling apps that were supposed to be the troublemakers (ref my discussion on Maverick problems) but I now need to get onto data specific to some of these apps as well as other data I may have missed. Long story? Yes and sorry.
    Sigi

  • How do I use a downloaded restore file to restore my iPhone

    How do I use a downloaded restore file to restore my iPhone

    Hi,
    I connected the phone and downloaded the restore file via iTunes.
    But it's failing to restore and bringing this error:
    2013-11-20 19:47:11.095 [5296:490]: restore library built Aug  8 2013 at 02:24:58
    2013-11-20 19:47:11.095 [5296:490]: iTunes: iTunes 11.1.3.8
    2013-11-20 19:47:11.095 [5296:490]: iTunes: Software payload version: 11B554a
    2013-11-20 19:47:11.095 [5296:490]: iTunes: Using MobileRestore state machine
    [17:47:39.0143] Changing state from 'Idle' to 'Restoring'
    [17:47:39.0145] requested restore behavior: Erase
    [17:47:39.0147] requested variant: Erase
    [17:47:39.0163] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [17:47:39.0692] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
    [17:47:39.0693] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 0E455608 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0693] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 0E4554E8 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0694] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0E455650 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0695] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0E455698 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0696] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0E4556E0 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0696] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 05CDCD00 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0697] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 05CDCA78 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0698] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 05CDCD48 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0699] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 05CDCBE0 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0699] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 05CDCC70 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0700] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 05CDCA30 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0701] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 05CDCC28 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0702] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 05CDCB98 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0703] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 05CDCB08 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0704] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 05CDCAC0 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0705] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 05CDC9E8 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0706] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 05CDCCB8 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0707] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 05CDCB50 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:47:39.0708] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 10A37560 [74D18078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [17:47:39.0709] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
    [17:47:39.0709] amai: AMAuthInstallDebugWriteObject: debug object written: C:\Users\CHRIST~1\AppData\Local\Temp\Per6DE1.tmp\amai\debug\tss-request.plist
    [17:47:40.0686] amai: tss_submit_job: HttpQueryInfo returned 200
    [17:47:41.0066] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
    [17:47:41.0073] amai: AMAuthInstallDebugWriteObject: debug object written: C:\Users\CHRIST~1\AppData\Local\Temp\Per6DE1.tmp\amai\debug\tss-response.plist
    [17:47:41.0229] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
    [17:47:41.0247] iBoot build-version = iBoot-1940.3.5
    [17:47:41.0248] iBoot build-style = RELEASE
    [17:47:41.0249] requested restore behavior: Erase
    [17:47:41.0251] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [17:47:41.0251] requested restore behavior: Erase
    [17:47:41.0253] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [17:47:41.0254] unable to open device_map.txt: No such file or directory
    [17:47:41.0254] found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
    [17:47:41.0255] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [17:47:41.0256] AMDeviceIoControl: GetOverlappedResult failed
    [17:47:41.0256] AMDeviceIoControl: pipe stall
    [17:47:41.0256] USBControlTransfer: error 31, usbd status c0000004
    [17:47:41.0257] command device request for 'getenv radio-error' failed: 2008
    [17:47:41.0257] radio-error not set
    [17:47:41.0258] unable to open device_map.txt: No such file or directory
    [17:47:41.0258] <Recovery Mode Device 02B88AB8>: production fused device
    [17:47:41.0259] requested restore behavior: Erase
    [17:47:41.0259] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [17:47:41.0260] requested restore behavior: Erase
    [17:47:41.0261] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [17:47:41.0262] interface has 1 endpoints, file pipe = 1
    [17:47:41.0262]
    [17:47:41.0262] <Recovery Mode Device 02B88AB8>: operation 4 progress -1
    [17:47:41.0306] bootstrapping restore with iBEC
    [17:47:41.0307] requested restore behavior: Erase
    [17:47:41.0318] <Recovery Mode Device 02B88AB8>: operation 31 progress -1
    [17:47:42.0319] <Recovery Mode Device 02B88AB8>: Recovery mode succeeded
    [17:47:42.0321] Finished Recovery Restore Phase: Successful
    [17:47:42.0654] Recovery mode device disconnected
    [17:47:42.0657] Device removed when in state Restoring, moving device to transition state
    [17:47:42.0659] Changing state from 'Restoring' to 'Transitioning'
    [17:47:42.0663] Creating timer to monitor transition
    [17:47:59.0098] Recovery mode device connected
    [17:47:59.0099] Transitioning device returned, continuing restore.
    [17:47:59.0101] Canceling timer
    [17:47:59.0102] Changing state from 'Transitioning' to 'Restoring'
    [17:47:59.0104] requested restore behavior: Erase
    [17:47:59.0105] requested variant: Erase
    [17:47:59.0107] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [17:47:59.0110] Recovery mode device disconnected
    [17:47:59.0111] Device removed when in state Restoring, moving device to transition state
    [17:47:59.0112] Changing state from 'Restoring' to 'Transitioning'
    [17:47:59.0112] Creating timer to monitor transition
    [17:47:59.0617] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [17:47:59.0617] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [17:47:59.0618] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [17:47:59.0619] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [17:47:59.0619] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [17:47:59.0620] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
    [17:47:59.0620] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
    [17:47:59.0621] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [17:47:59.0622] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [17:47:59.0622] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [17:47:59.0623] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
    [17:47:59.0623] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [17:47:59.0624] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [17:47:59.0624] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [17:47:59.0625] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [17:47:59.0625] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [17:47:59.0626] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [17:47:59.0626] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [17:47:59.0627] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [17:47:59.0628] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
    [17:47:59.0628] _AMRUSBDeviceSendDeviceRequest: CreateFile failed for \\?\USB#VID_05AC&amp;PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#f07 6e22a, error 3
    [17:47:59.0629] command device request for 'getenv build-version' failed: 2002
    [17:47:59.0629] _AMRUSBDeviceSendDeviceRequest: CreateFile failed for \\?\USB#VID_05AC&amp;PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#f07 6e22a, error 3
    [17:47:59.0630] command device request for 'getenv build-style' failed: 2002
    [17:47:59.0631] requested restore behavior: Erase
    [17:47:59.0632] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [17:47:59.0632] requested restore behavior: Erase
    [17:47:59.0633] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [17:47:59.0634] unable to open device_map.txt: No such file or directory
    [17:47:59.0634] found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
    [17:47:59.0635] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [17:47:59.0635] _AMRUSBDeviceSendDeviceRequest: CreateFile failed for \\?\USB#VID_05AC&amp;PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#f07 6e22a, error 3
    [17:47:59.0636] command device request for 'getenv radio-error' failed: 2002
    [17:47:59.0637] radio-error not set
    [17:47:59.0638] unable to open device_map.txt: No such file or directory
    [17:47:59.0639] <Recovery Mode Device 06A570A8>: production fused device
    [17:47:59.0640] requested restore behavior: Erase
    [17:47:59.0640] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [17:47:59.0641] requested restore behavior: Erase
    [17:47:59.0642] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [17:47:59.0642] _AMRUSBDeviceSendDeviceRequest: CreateFile failed for \\?\USB#VID_05AC&amp;PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#f07 6e22a, error 3
    [17:47:59.0643] error setting interface's alternate setting: 2002
    [17:47:59.0644] _AMRUSBInterfaceOpen failed for \\?\USB#VID_05AC&amp;PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#f07 6e22a: 3
    [17:47:59.0645] AMRAuthInstallDeletePersonalizedBundle
    [17:47:59.0762] Restore completed, status:2002
    [17:47:59.0762] Failure Description:
    [17:47:59.0762] Depth:0 Error:Failed to restore device in recovery mode, libusbrestore error:2002

  • Itunes file wont open

    so im trying to install itunes to my computer and when i enter my email adress to download it.the file doesnt open .i dont get it plizzz help .!!!!!!!!!

    OK-
    First, let's get your iTunes open.
    Click on Start, Click on Run
    Type msconfig
    Click on the startup tab (last one on the right)
    Click on "disable all"
    Click apply, then click close
    Go ahead and restart your computer when prompted to do so
    When your computer starts back up, you should be able to open up your iTunes. When it opens, close it again. Now that we know it is able to open, it needs to be closed in order to resolve the file folder with exclamation point error.
    Now, let's get that file folder issue resolved.
    Click start, click all programs, click iPod, click iPod updater, click iPod updater (again)
    Click OK when you see the dialogue that tells you what the application's capabilities are
    Connect your iPod when it tells you to
    Click on the "restore" button when it becomes available
    IF the restore button does not become available, and if the iPod updater fails to recognize the iPod, disconnect it. Reset the iPod by (making sure the hold switch is off) pressing the menu button and the select button at the same time for about 10 seconds, until you get the Apple logo. As soon as you get the Apple logo, hold down the select button and the play/pause button together until you get a check mark on the screen. You may have to try this several times to get it to work... and sometimes it helps to lay the iPod down on a hard flat surface, like a table or your computer desk.
    Once you get the iPod into disk mode, you can go ahead and try to restore it again. (Start > All Programs > iPod > iPod Updater > iPod Udpater) Click OK, Connect your iPod when it asks you to do so, and then click the restore button when it becomes available.
    If you're still having issues, try reading through some of the following articles:
    http://docs.info.apple.com/article.html?artnum=93736
    http://docs.info.apple.com/article.html?artnum=61003
    Keep us posted
    CG

  • Migrated files wont open or error msg

    I used migration asst to migrate files from Imac power pcG3 (OS 10.3.9 and classic 9.2.2 installed) to my new imac G5 intel. I selected " move files and folders only" but everything migrated. When i try to open old files, some open, others give msg " this file is locked or in use. Would you like to open a copy?". These are appleworks WP files. when i try to move any migrated file to the trash, i get msg "finder requires you to type your password".
    I installed office:mac 2004 on new computer. since migration, it hangs up, cant close documents, have to force quit.
    G5 intel   Mac OS X (10.4.7)  

    Did you set the same username/password combo you used on the old iMac on the new iMac? If not, those belong to the old user, which should be available on the new machine, and not the new user, that's why you need to authenticate to trash them. Since you just got the new machine, you might consider restoring the new machine to the factory condition, using the same username/password combo on the old one, if you still have the old iMac, and using the Migration Assistant again.
    As for the AW files, did you create them using the OS 9 version? Since the Intel-Macs can't run classic, you're probably out of luck opening them. If you still have the old iMac, you should open the AW files with the OS X version 6.2.8, convert them, and copy them over to the new machine. Then try to open them with the OS X version.

  • How to backup/restore files stored in the local copy of my iDisk using time

    I have a MobileMe account and thus I am using the iDisk. I configured it to have a local copy. Thus I imagine that Time Machine is making an hourly backup of it.
    However, when I enter Time Machine to restore a file, I cannot open my iDisk (it goes to the current version, not the historical ones).
    This is particularly worrying for me, as all my important files (except images, movies and music)are stored on my iDisk such that I can access them from my multiple computers.

    From this PCWorld article:
    [Back up IDisk With Time Machine|http://www.pcworld.com/businesscenter/article/190738/backup_idisk_with_timemachine.html]
    This local copy is stored as a sparse image bundle, which you can find on your Snow Leopard Mac by moving to your user folder and then following this path: Library/FileSync/incomprehensibly-named-folder where incomprehensibly-named-folder bears a name made up of letters and numbers. Inside this folder is the file you're after--yourmobilemename_iDisk.sparsebundle.
    Unless you've configured Time Machine to exclude your user folder and its contents, this is where you'll point Time Machine to look for a backup. Note that when you travel back in time and restore this file, you'll be warned that there already exists a file with that name and offered a choice to keep the original, keep both, or replace the original. I'd suggest keeping both. Here's why.
    I'm going to assume that people would want access to their old iDisk because they've lost something from it between then and now. If you keep the original, you can't get to your old stuff. If you replace the current sparse image bundle with the old one, your iDisk and Mac are now out of sync and you won't have the files you added since the restore point until they're synced again. If you keep both, you have everything you need.
    Move the restored file to your Desktop, double-click it to mount it, and grab the content you want. Leave the original where it was, remove the (original) that now appears in its name, and your Mac and iDisk can go back to syncing where they last left off.
    ------------------------------

Maybe you are looking for

  • Looking to buy my first MacBook Pro, advice needed

    Hey all, this is my first post. I am looking to become a MacBook Pro owner for the first time. I have an iphone5 and an ipad but have decided it's time to step up. I have decided to give my ipad to my wife because she likes the more portable device a

  • Questions in the APP

    Hi All, Can any one help me for the below questions, Once we configured APP program successfuly in the system, How to print the Automatic Payment Check? How to update the Check Register with Automatic Payment Checks? How to configure the Payment Medi

  • Where do I put my KeyListener ?

    I've got a JInternalFrame with a JPanel and JToolBar added to it. I want to add a key listener so when the user pushes + or -, a method is called on the JPanel. A screenshot is available below -- the colored boxes are JLabels. http://www.enginuity.or

  • Excel information to be added in image

    Hi, I have around 650 images and some information such as file name or data is given in a seprate excel. For Ex. in the spread sheet the information would be A          B Fig 1    Bus I need to paste the information at the bottom of the image Can any

  • EJB deployment/access from the Client Machine

    I want to deploy/access the EJB on the Oracle 8i server from the Client Machine. From the Oracle 8i server machine i am able to deploy and access the EJB When i am trying to deploy/access the EJB i am getting the following message javax.naming.Commun