Restore from time machine to SSD/HDD iMac

Hi,
I had to erase HDD/SDD on my 2011 iMac with both SSD and HDD drives. The system was installed on the 256 GB SSD ("Macintosh HD) and the user accounts on the much larger 2 TB HDD ("Macintosh HD 2"). I was able to restore the SSD with the system, software etc. Also one smaller account that was previously on the SSD also made the cut. However, I didn't figure out how to restore also the contents to the HDD and whenever I've tried to use the Migration Assistant I was told that there is no need to restore the user accounts that were sitting on the HDD (in fact, Migration Assistant said that there is only "1 kb" to transfer). I've then tried to manually copy the user accounts from time machine (on a Time Capsule) to the HDD but I've waited for hours (my account is roughly 1 TB big) - only to get error messages about permissions. Same story happened when I tried to log into my empty user account and tried to use time machine to restore my folders.
How is this system supposed to work in the first place? Shouldn't the user accounts on the HDD be restored 'automatically' during a restore or when using migration assistant?
Look forward to hear from you.

samaki wrote:
"This user's data doesn't need to be transferred")
That seems to mean, their home folders aren't on the OSX drive, so Migration Assistant doesn't need to (or can't) transfer them.
We've asked Apple to address this, but it doesn't seem real common, and would make the Assistants rather complicated, especially for newbies.
I've tried out many things I had come to get used to from 12+ years on the Mac
Yeah, it ends up being a bit of a conundrum. That's why it's often best to leave the home folders on the Startup drive, but put the data on the HD.
I've made a note to try to find a better workaround for your situation (the Disk Utility thing is fine, space permitting). I tried a bunch of finagles when I wrote that page, but maybe something will turn up with a fresh start.
Retrospectively, perhaps, it was a mistake to have the time machine backup sitting on a user account specific folder on the time capsule (named after my first name) instead of the standard "Data". Both the setup assistant after flatting the drives and reinstalling 10.8 and the Migration Assistant seem to have had trouble to recognise the password protected location.
It does complicate things.
For the future I'd loved to know what one could do to streamline this should the need arise again?
What I'm thinking of is, if you still have access to the old Mac, to create default home folders on the SSD, point the accounts to them, so they can sign on. Then either transfer directly from the old Mac, or do a backup and transfer from it. Log on to each user account, copy the home folder, then redirect the account to that one. Sounds promising, but there are a couple of "gotchas" there, I think.
I'll let you know, and revise that page accordingly, if I figure something out.
Thanks for the feedback - - it gets me thinking.

Similar Messages

Can't restore from time machine after SSD upgrade

Macbook Pro 13" mid-2009, 10.7.5 Lion
I just swapped out my 160GB HDD with a 250GB SSD on my MBP. When I booted up, I pressed Command-R to try to get into recovery mode but all it does was showing a gray folder with a question mark on it.
I had previously backed up my HDD with time machine. My original HDD is no longer available because I tried to upgrade to Mavericks (since the command-R was not working) and upon restarting my MBP was locked with system pin code (that is another nightmare all by itself)
What are my options besides getting a 10.7 Lion CD from the apple store and try to boot it up that way? and then restore from time machine?
Any other way I can get into receovery mode?
Thanks (My MBP is now a brick sitting on my desk)

It's a bare drive so it isn't formatted and it doesn't yet have a Recovery HD installed on it.
Your computer originally came with a version of Leopard installed. You can reinstall it if you still have the original discs that came with the computer. Or, if you have a retail Snow Leopard DVD you can reinstall Snow Leopard from which you can then upgrade to Mavericks (Lion is no longer available for re-download.) It's unlikely your local Apple Store has a Lion USB flash drive or DVD although you can certainly make an appointment and ask for their help.
You should see if you can boot from the Recovery HD invisible image in your Time Machine backup drive. Connect it to the computer and use OPTION boot to get the boot manager. If you see a Recovery HD on your backup drive displayed, then boot from it.

Imac won't restore from time machine backup after HD (hard drive) recall replacement

I have an imac bought in 2011, running Snow Leopard. It required an HD replacement due to the 1 TB Seagate recall - the replacement was done by a certified Apple repair station yesterday. Before the guy left he started a backup/restore from my latest time machine backup set. It failed. I attempted it two times and got error messages that it failed and the computer needed to be restarted to try it again. No luck. I called the guy back and he told me to call Apple Care. Not thrilled about that response since the guy had just left my house I did what he told me to do. (A quick sideline here: I recognize that a time machine backup should be no big deal and SHOULD work everytime, but it doesn't. It irks me that Apple is replacing my HD through no fault of mine and yet they don't allow the restore of data to be a "covered" expense in this process - this isn't just because this was an authorized repair guy - the Apple store would have done the same).
Back to the issue. When I called apple care they pretty much had me try the same thing again with an earlier back up set. To my knowledge, it didn't work. I say this because it looked like it was working and when I came back to the imac later, it had restarted and once again booted to the OSX install. (The boot disc is still in the imac). When I tried to boot from another location, one did not show up to boot from so I assumed that the data didn't transfer and it forced another restart. So, I tried something else. I tried to re-install the snow leopard OSX without using the restore function. That appeared to work and then when the machine restarted it asked if I had another mac and I chose the option to get the files/apps/etc. from my time machine backup. The computer chose what I can only assume is the most recent backup set (It chose what I know to be a subfolder that appears under the dated backup folder - Macintosh HD--which btw is confusing seeing as that's always the name of the HD on the imac). I again stepped away from the computer so it could do its thing for two hours. When I returned, I was back to the MAC OSX screen that asks you to choose a language. There were no more options to choose DISK UTILITY or RESTORE FROM BACKUP, etc. When I clicked on English it took me right back into the screen where you say whether you have another Apple that you want to transfer data from. I realized that the imac must have restarted and I assumed maybe it was because the boot disk was still in - except how do you get the disc to eject? I also initially assumed that the backup had somehow failed again and triggered a restart. I tried to choose the option to just set up the machine without transferring data and when I got to the choose a name for your HOME folder message I tried to enter the same name I had it as before and it wouldn't allow me to do so, saying that that name was already in use. I also tried a different name and that didn't work either - got the same message (I assume if it is not the same name that it won't sync up with the time machine data from the backup set). So, I almost tried the "select time machine backup" option again until I looked at my HD space. Clearly, there is space that has been used. HD space was 997 at the start and now it's 636. My initial thought is to somehow get back into the setup area where I can use disc utility and erase the whole thing and then start over but 1) I don't think it's going to work even if I could get back there 2) I have no idea how to get this thing to reboot into that mode 3) I can't get the boot CD out to even try to restart to see if this thing did what it was supposed to, SO NOW I AM TOTALLY STUCK! I have not called Apple Care back because quite frankly they were useless the first time. I have a call into the repair guy but who knows how much help he will be. In the mean time, I have a million things to do and a computer that isn't working - Whoever said Apples never have issues needs to be seriously censored!
A few other notes: I use Time Machine Editor to run my backups weekly. It was set up that way from the get go by an Apple rep who came to my house to get us up and running. Editor should not effect the way that time machine does its work, so I doubt there is relevance but thought it worth mentioning.
One other note is that the Apple Care agent tried to have me do something called a "Source" something or other from the disk utility screen but when she realized that my backup file (shown by date) contained many other sub files (11-27-12/MacintoshHD/MyNamesIMAC/etc.), it was not possible to run this operation - thus we aborted. Sorry I don't remember the name of the process and unfortunately now can't access that option to go find it.
If you can help me, I would be eternally grateful! I am open to having a phone conversation if you are willing to give me your email to mail you my number. I have so much work to do this week and this was the last thing I needed. Did I mention this was supposed to be EASY?
I used to be quite the geek with my PC - still on the learning curve with the mac but not enjoying it. I am fairly tech savvy and I can follow instructions for a step by step solution if you've got one.

I got a recall and had the drive replaced. I have retored 3 timesa dn even had apple do the job and it is still not right. I still can't get a simple ghost of the data from time machineback tot he new drive.
This is Apple's explaination as taken from their web page.:
Restoring your entire system from a backup
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Recovery system (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility.
Note: If "You can't restore this backup because it was created by a different model of Mac" appears when restoring a backup that was made on a different Mac, follow the onscreen instructions.
I even posted this information on the community and apple removed it... because they don't like the:
Off-topic or non-technical posts
Non-constructive rants or complaints
But here is my experieince:
Take in 27iMac running 10.6.8, 5-7 days, what a joke, my boss will be happy to pay for a week without working. Finally get, "if you have TM back up, 3 days." Get machine back with 10.6.3, hit the R recovery, click TM back up, runs for 2 hours, reboots, looks great. Box up take back to office... update to install - OH NO, still running 10.6.3. Updates crash with no specific error on install, BUG PROBELM, nothing runs.
Call Apple... after hours, tells me to boot using 10.6.2 disk, wipe, reinstall OS, udate to 10.6.8, THEN do the restore. GREAT! Only thing 10.6.2 DVD won't read... now back on phone... take back to the store, Genius says, he'll ix it just like it was. PROMISES it'll be fixed.
Pick up next day, supposedly, booted to disk, wiped drive, reinstalled, updated to 10.6.8 and THEN did the RIGHT restore... Looks GREAT... apps run and 10.6.8 OS. Back to the office... NOT RUNNING right!!!... fonts messed up, drop box app needs new install, cocktail needs upgrade, Fetch not working, memorized paths gone... back ups locked out of permissions... ***!!
4 hours on phone with apple and still no rsolution - to missing "settings". Seems there are THREE WAYS TO RESTORE (according to apply tech)... Running MIGRATE ASSISTANT and being able to choose your files, including settings, "R" RESTORE after they load a new OS... or NOW WAITING for them to send me a bootable 10.6.3 disk and then boot from disk, w/o installing OS and doing a restore from TM. I think this is done via the disk Utilties application.
So now can't back up without doing a full 400 GB back up since permissons are screwed and possibly destroying any good back ups... can't work, like having hands tied behind back. WAITING for solution! Very upset!!!
I did my first restore just like they said and now an 10 days without proper machine. Just FYI. I thnk I am going to make the store do the tech work so I have somthing to fall back on.

Had to install a new hard drive early 2008 iMac, now can't restore from Time Machine.

Had to install a new hard drive in a early 2008 iMac, now can't restore from Time Machine. Backups show in Time Machine but I can't select them.
Serial Number QP*****1LW
<Edited by Host>

Here are some notes on Time Machine problems.
http://pondini.org/TM/
Troubleshooting.html
I have asked the hosts that your serial number be removed. Best not to publish it,

Restore from Time machine on new 13" Macbook Pro 2.8 i7 after replacing with OWC SSD

I have new 13" Macbook pro with Apple 256SSD. I am replacing with OWC 480GB 6GB SSD because out of space. When I bought machine I used time machine to restore from backup of other macbook pro. I simply held a key on keyboard at startup (dont remember key?) and it appeard to boot from the cloud to a screen where i selected time machine. Will it work the same this time or because I am replacing hard drive i have to create the USB key thing to restore from time machine? ie does apple have the restore from cloud capability only from their own drives?

You should consider restoring or migrating first only data that you absolutely need and want on the SSD. Then restore selectively.
On the latter, and in general on the topic Time Machine, here is good advice.

I have a late 2006 iMac that has just started giving me a message to reboot after a black screen comes down slowly from the top top of the screen to the bottom. I reloaded software and restored from Time Machine, it now happens frequently. Any insight?

I have a late 2006 iMac that has just started giving me a message to reboot after a black screen comes down slowly from the top top of the screen to the bottom. I reloaded software and restored from Time Machine, but it keeps happening, now several tomes a day. Any insight as to the issue or a proposed solution?

Unplug any peripherals you have except your keyboard, reboot, and check activity monitor for apps. Keep running apps to a minimum to find the App causing the issue.

IMac won't startup after restore from time machine

After I restore my backup from time machine ( twice ) mi iMac halt at startup and won't startup. It stuck at the apple logo forever. I also restarted holding down command R safe mode and install OS X and it will startup okay but can't see my buck up files and applications here. Then I restore from time machine again using an earlier backup and it won't startup again. Please any help I will appreciate.

There could be a few reasons for this.
First what version of OS X do you have installed?
What version of OS X is the Time Machine Backup file from?
Did Reinstalling OS X from Recovery install the same version you had before reinstalling?
If you have not changed OS X versions then:
It sounds like there may be a bad file in the backup that is causing the computer to not startup after restoring it. This is especailly true if the computer boots just fine after a fresh installation of OS X, but without the Migrated Data being restored.
If that is the case, then the solution is not a quick one. You have to hunt down the bad file.
Moving Files Manually (Not in Migration Assistant)
Manually access your Time Machine backup folder from within Finder (you should see the backup drive in a Finder Window or on your Desktop). Once open, manually move data from the User folder (documents, music, movies, photos etc.) into their respective folders on the Mac. Reboot after each folder you move to see which folder contains the corrupted file then delete the affected folder/file after reinstalling OS X from Recovery.
If none of the files cause the computer to hang at startup after moving all your User data, then the issue is from within the System or Library folders.
NOTE: DO NOT manually move Applications, System, or System Library files over to the Mac. You can cause major issues with the current installation by doing so. It is safer to just reinstall all the Apps from wherever you got them so they can recreate their support files and such themselves.
2- Using Migration Assistant
Basically, if you have discovered the affected file. You can just simply delete it from the backup folder.
Reinstall OS X after you have done that, and use Migration Assistant to automatically migrate the data over minus the affected file/folder.
Its a pain in the rear, but it will at least let you salvage most of your data.
Let me know what happens riorec!
- Captain

How do I create a recovery partition when restoring from Time Machine?

I am planning to replace the HDD in my Macbook Pro with an SSD. I've used Time Machine to backup my HDD (running Mountain Lion) but am trying to find the best way to restore my Time Machine backup to the new SSD once installed.
Given that the new SSD will not have a bootable OS X Recovery partition, I have created a bootable OS X Recovery drive on a USB thumb drive using OS X Recovery Assistant.
In order to ensure that the new SSD has the OS X Recovery parition, should I:
(1) reinstall Mountain Lion on the SSD then recover my data from Time Machine; or
(2) can I simply use the Restore from Time Machine option in OS X Recovery to do it all at once.
I can't seem to work out whether option (2) will create the OS X Recovery partition on the new SSD or just recover the system partition.

Turns out the OS X Recovery partition is only created on a fresh install of OS X. Restoring via Time Machine will not do the trick.

Cannot restore from time machine

I installed a new SSD into my late 2012 mac mini along with the current HDD. Turned it on formatted the SSD and everything work fine. Next I wanted to transfer OSX and applications to SSD and use HDD for just storage. I backed up using time machine. I looked into a few different was to transfer OS. DIsk utility was wanting to create a fusion drive from the 2 drive. I went with this option.
It wiped the drives and made a new single storage group. I tried restoring from time machine a couple of times but this would not work saying: 'An error occurred while adding a recovery system to the destination disk' I went back into disk utility and checked the disks. Repaired the errors it said and tried again. Did not work.
Next I tried deleting the disk again and installing Mountain Lion from scratch from the internet option in recovery mode. This took I long time and got as far as nearly installing osx but got stuck on 15 mins remaining. I left this all day while I was at work.
Tried doing this a second time and it started downloading from the internet again but something must have gone wrong because when I came back it was back in recovery mode screen.
So not sure what else I can try to get this fixed. There is a suggestion online that this is a known problem with Mountain Lion and 2012 machines, but that doesn't really help me get working agian. The only other thing I can think of trying is un-fusioning the 2 drives and trying to install on just one to see if this works.
Does anyone else have any other steps to try?

Some drive partition configurations can result in the OS X Installer reporting that it cannot create a Recovery System. If this happens, you might want to quit the installation and create an external OS X hard drive with a Recovery System first. You can continue installing OS X on your computer's startup drive after creating an external Recovery System.
Where did yo install the SSD? Lower bay (one nearest the bottom cover) or the uppter bay (normally empty on single drive Mini?
Some users have reported problem with an SSD in the upper bay. Maybe because of the new cable or because of that SATA bus.
Try installing the SSD in the lower bay iff it is not there. Also if yo do not want a Fusion drive, disconnect the HD during the install if the SSD has enough space for the TM backup

89 hours for Restore from Time Machine backup!! Is this typical?

Trying to restore my iMac after a hang up in the boot process....grey screen----->apple----->progrees bar to 1/10 full----->shutdown.
Troubleshooting steps thus far,
-Booted from Lion install USB.
-Ran Disk Utility and all tests show that the startup drive is in good order.
-Went to Restore from a Time Machine backup and chose Iomega USB 2.0 backup drive.......internal HD would not show up in destination list.
-Went back to Disk Utility and erased internal HD and formatted for HFS+ (Journaled)
-Tried to restore from Time Machine again, was able to select internal HD as destination this time.
-Estimated time.......89 HOURS!!!
24" iMac (Mid 2007)
2.8 Ghz Core 2 Extreme
4 GB Ram (667 Mhz)
500 GB HDD (ATA)
2 TB Iomega USB 2.0 backup drive.
I understand this machine is no spring chicken, however, this amount of downtime seems excessive. Why so slow? Any ideas to speed it up?
Thanks.

Sounds like your internal HD may be failing.
If it's working slowly, having to do numerous retries, etc., everything will be very slow.
Note that Disk Utility won't necessarily find that sort of problem with a HD; it only checks the file system on the drive for consistency -- all the various directories, catalogs, etc.
Less likely, but possible, are problems with RAM, the USB drive, the USB port on your Mac, or even the USB cable.
Unless you're well into the restore, you might want to try running this: Intel-based Macs: Using Apple Hardware Test. Run the Extended tests (that may take an hour or more, depending on how much RAM you have). Write down any error code(s) it shows.

Toasted my installation. Restoring from Time machine to 2 hard drives?

I just installed a second hard drive into my macbook pro. SSD is the system drive and HDD is the data drive.
When it was still working, I had my home folder on the SSD and my iTunes and Photo libraries on the HDD. Things were good.
Then I decided to move the entire home folder to the HDD.
Sys Prefs -> Users -> right-click the user -> advanced -> "move the home folder"
and again, everything was good.
Then I read something about having the user Library folder on the SSD is a good thing.
So I moved the home folder back to the SSD. Rebooted and all my prefs were now gone. Figured I messed up something and didn't want to troubleshoot.
So time for a restore.
Attempt 1
- Open Time Machine, select both hard drives, selected a past date and hit restore.
- Got a message that I didn't have enough space.
* I figure this is because time machine restores the entire contents of each drive as entire new volumes as a first step.
Attempt 2
- Go into recovery mode COMMAND+R
- Discovered I don't have a recovery partition
* I guess this is because I cloned my original system drive to the SSD using CCC and it didn't move this part.
Attempt 3
- I created a LION USB Install Key
- Booted from it, and selected 'Reinstall Lion' (because I read an article that I could recover my files after Lion had finished installing)
* Discovered that it reinstalled 10.7.0 and I would have to apply all patches on top. It didn't restore my HDD either.
* Later found out this method only restores the main system drive.
Attempt 4
- Now that I have a recovery partition, I booted from it.
- I selected "Restore from Time Machine Backup"
- Was able to select my Time Capsule, and it gave me choices on which date I would like to restore to.
- I selected and hit restore.
* It's about 25% done now. And I realize that i should've done this in the first place.
Question: Will this method restore both of my hard drives?

hsmp wrote:
Question: Will this method restore both of my hard drives?
No, only a single OSX drive. If both were backed-up, and both contained OSX, there was a (not very obvious) option to select which one you wanted.
See Time Machine - Frequently Asked Question #14. Section (g) shows this.
If you want to restore the "other" drive, and it contains OSX, run the restore again and select it.
If the other drive doesn't contain OSX, use the "Star Wars" display to restore it, per FAQ #15.

Restoring from Time Machine doesn't work

I am attempting to restore from Time Machine on my 13" Late 2008 MacBook, but the restore stops about halfway through.
Some background information: A few weeks ago my computer started exhibiting some weird behaviour. It would turn the disk off or log me out after a few hours (I typically sleep with it on and use at as my alarm clock). Then, apps would crash and quit unexpectedly. It would kick in the HDD when I was not using anything that required it, and the fan would turn on for no reason. Then the worst thing happened: Some days I would get the dreaded "You need to restart your computer" screen multiple times. It almost seems like a virus. The problems persist after multiple PRAM and SMC resets. Sure enough, I tried turning on my computer yesterday and it just won't even start. It would give me the Apple logo, a spinny loading indicator, and then it would give me a very slow progress bar. As soon as the progress bar gets to about one tenth of the way, the computer turns off.
I have everything backed up to a very recent Time Machine. I opened the computer in Recovery Mode and verified the disk. It needed repair. So I repaired it, and it said the repair was unsuccessful and needed to be restored. So I tried restoring it. I ended up having to erase Macintosh HD and reinstalling Lion (which thankfully I could do over the Internet). After reinstalling that, I tried "Restore from Time Machine." It got to about 30% of the restoration and then took me back to the Utilities page spontaneously. It didn't give me an alert or an error of any kind. It has done this multiple times. I may try Migration Assistant and see how that works. I know that a 4-year old MacBook is a bit of a dinosaur anyway, but the machine has been very useful and powerful for the whole time I've had it, and this is not how I'd like to see it die.
I also have a lot of important data on the Time Machine and fear that whatever afflicted my MacBook may afflict the MacBook Pro I intend to get soon, which I will load my TM onto.
Any and all help is deeply appreciated.
-Sam Taylor

I have always had problems restoring from my backups. I just replaced my hard drive and did a restore and now there are no icons in the dock (all ?'s) and I cannot click on my Applications folder in any finder window. (Oh, and the fans run constantly at top speed after being on for about 3 minutes.)
This is probably the 10th restore I've done in the past couple of years and I don't think one has worked for me.

How to restore from Time Machine WITHOUT install discs using a second Mac

It's a question that is asked repeatedly all over the web by Mac users like me that bought in to Time Machine (TM) on the assumption that if their computer died one day it would be a piece of cake to restore from it, only for that day to come and then to be told "ahh, okay the first thing is to get your computers install discs..." (loud crashing sound of world falling around ears).
I've never been able to afford a new Mac and both of my machines were bought second-hand. Neither came with Leopard (both have Tiger and have been upgraded to Leopard via the net). This was never supposed to be a problem as I've been backing up with TM. However it appears that Tiger discs are as much use as an inflatable dart board when it comes to using TM. So I've been faced with the possibility of having to spend £130 (about two hundred Pres Sheets, Yankees) on the Leopard install discs just so that I can have the option of restoring from TM. Bonkers.
However after much nashing of teeth, a very long weekend learning all sorts of things about 'Target Mode', 'Single User Mode', 'Verbose Mode', 'Open Source 9' etc the following solution has worked without the need to go out and buy those over-priced discs...
What you will need:
1 broken Mac requiring restoration
1 second donor Mac running Leopard (or Snow Leopard so long as the broken Mac can run it)
1 firewire cable with the correct fitting at either end to attach both Macs together
1 Time Machine backup
Note: The following is for when you have given up trying to boot from your hard drive. In my case I couldn't boot in to Safe Mode etc. so was forced to format my drive and re-import everything. If you've read this far I'm assuming your at the same point as well and have tried everything else that's out there first.
Also - both my Macs are Power PC's so can't run Snow Leopard, so I can't say 100% this will work with SL (Intel) machines. From what I've read Snow Leopard will work with this procedure too, but if you've found differently please feel free to add your experiences below...
STEP ONE: Format the corrupt Hard Drive or replace with a fresh HDD
*Link the two computers with a firewire.
*If you're replacing your HDD, remove your corrupted hard drive from the 'broken' machine and insert a new one.
*Power up the broken Mac whilst holding down the 'T' key. This will start it up in Target Mode and you'll get a nice firewire symbol floating around that machine's screen.
*Power up the second 'healthy' Mac. This will be our 'donor' machine. When it starts up after a few seconds you will see the hard drive of the broken Mac appear on the donor Mac's desktop.
*Using your donor Mac's 'Disc Utility', format the broken Mac's hard drive (now's the time to partition it etc. if you want to).
STEP TWO: Clone your donor Mac
Your broken Mac is no longer broken and now needs a new OS. But you don't have the discs, right? Well get this... you can clone your donor mac on to your machine, even if they are totally different i.e. a laptop on to a tower.
*Again using Disc Utility, click on your donor Mac's hard drive. The restore tab appears as an option.
*Click on restore and drag the donor Mac's hard drive that contains the operating system in to the Source box.
*Drag the newly formatted hard drive on the broken Mac in to the Destination box.
*Click restore. Your donor Mac's hard drive will now be 'cloned' on to your no-longer-broken Mac. Once this is done, eject the first Mac's hard drive from your donor Mac's desktop. You no longer need the donor Mac.
Ta daa! Your machine now starts up happy and smily again. Time to restore all that stuff that's been sat on your Time Machine drive...
STEP 3: Restore from Time Machine using Migration Assistant
This is the really clever part that prompted me to write this piece in the first place. Time Machine IS accessible without those Leopard install discs you don't have. You need to use something called 'Migration Assistant'.
*Start up your machine as normal and you'll see it is an exact clone of the donor machine. Weird huh?
*Attach your Time Machine hard drive. It will show up as an icon on the desktop and because of it's size, you'll be asked if you want to use it as a Time Machine backup. Err, NO YOU DON'T! Click 'cancel'.
*Open Migration Assistant (if you can't find it just type it in to Finder and click). There are three options, the middle one being to restore from TM or another disc. Yup, you want that one.
*Migration Assistant will now ask you what you want to restore in stages, firstly User Accounts, then folders, Apps etc. It will even import internet settings
And that's you done. Let Migration Assistant do it's thang... altogether I had about 140gb to restore, so it wasn't exactly speedy. This wasn't helped by the fact that my TM hard drive is connected via USB (yes, I know). Just leave it alone and it'll whirr happily away...
Before I go - you don't have an option of when to restore from, and will restore from the last Time Machine save. At least then you should be able to access TM and go 'backwards' if you need to.
Also - for a Mac expert, the above will be up there with 'Spot Goes To The Farm' in terms of complexity. However, for the rest of us the above is only available in fragments all over the net. By far the most common response to 'how do I restore from Time Machine without install discs' is 'you can't'. If I'd found the above information in one place I could have saved a lot of hair pulling and swearing over the last couple of days, so forgive me for sharing this workaround with the rest of the world. Meanwhile your expertise will come in very handy for the inevitable questions that will get posted below, so please feel free to help those people that won't be sure if this solution is the right one for them. I'm no expert, I just want to help people that were stuck in the same situation (and looking at the web, there's a LOT of them).
Hope this is of use to someone, thanks and *good luck*!

Most maintenance and repair, restore and install procedures require the use
of the correct OS X install DVD; be it an original machine-specific restore/install
disc set or a later retail non-specific general install disc set.
By having an unsupported system, perhaps installed via an illegal download or
other file-sharing scheme, where no retail official discs are involved and the
initial upgrade was done by other means outside of the License Agreements,
you are asking us to discuss a matter of illegal installation and use of a product.
There are no legal complete OS X system download upgrades online; only bits
that are update segments to a retail or as-shipped machine's original OS X install.
+{Or an installation where a previous owner had correct retail upgrade discs, &+
+chose to not include them with the re-sale of the computer it was installed in.}+
However, to answer the initial question. To get and use an externally enclosed
hard drive in suitable boot-capable housing, and get a free-running Clone
Utility (download online; often a donation-ware product, runs free) you can
make a bootable backup of everything in your computer to an external HDD.
This is the way to make a complete backup to restore all functions to the computer.
The Time Machine has some limits, in that it can restore only that which it saves.
It does not make a bootable clone of your entire computer system with apps and
your files, to an external drive device. A clone can. And some of the clone utility's
settings can also backup changes to an external drive's system; if that other drive
is attached to the computer correctly.
Carbon Copy Cloner, from Bombich Software; and also SuperDuper, another of
the most known software names you can download and use to clone boot-capable
system backups of your computer's hard disk drive contents, are often cited.
However you resolve the matter of the running OS X system in your computer,
derived from what appears to be questionable means, is part of the initial issue.
Since you do need to be able to fix an existing installation by unmounting the
computer's hard disk drive and run the computer from the other (install disc or
system clone) while it is Unmounted; and use the correct Disk Utility version to
help diagnose and perhaps be able to fix it. You can't use a Tiger version Disk
Utility to fix a Leopard installation, and so on.
So, the situation and replies as far as they can go (since the matter does
constitute an illegal system, if it was arrived at without correct discs) is a
limited one. And file sharing of copied Mac OS X (and other) software is
also considered illegal.
And, one way to get odd malware and unusual stuff, is to get an unauthorized
system upgrade from an illegal source online. You never know what's inside it.
The other reply was not a personal attack; the matter is of legal status and as
you have a product with a questionable system, the answer is to correct it.
And if you want to save everything in your computer, make a clone to a suitable
externally enclosed self-powered boot capable hard disk drive. With older PPC
Macs, that would best be to one with FireWire and the Oxford-type control chips.
However that works out...
Good luck & happy computing!

Downloads folder missing after system restore from Time Machine

I installed a new HDD, installed Leopard, and the did a system restore from Time Machine. Everything seems to work fine except from a big question mark in the dock, where downloads folder should be. Any suggestions pls?

Thank you very much for your quick answers.
Probably the problem originated from excluding the Downloads folder from my backup, although it should have been there in my new installation. The interesting thing was that this folder were nowhere to be found in the Finder, and by trying to download something from Safari, it just wouldn’t.
I did a Repair Permissions from the HDD, not the Leopard DVD, and all came back to normal.
I have to admit, that coming from The Win world, this HDD replacement was the easiest and fastest ever, by far!

Can't restore from Time Machine using recovery partition

I came up with the idéa to put in an extra disk (SSD) into my mid 2009 13" Macbook Pro running Mountain Lion and create my own fusion drive.
In order to make sure not to lose all of my data I made sure to back up all my files using Time Machine so that simply could restore my entire system to the new drive.
Careful as one should be when about to wipe the entire drive on a computer I wanted to check so that I could make a proper restore from my TM backup disk. So I booted into recovery mode and choose to restore from Time Machine and then I selected my external drive, but then nothing. Where the list of my latest backups should be there was nothing.
I've tried to format the disk several times, changing disk permissions etc.
Does anyone have a clue what could solve this? Is it possible that it has something to do with the fact that I'm (probably) running 10.8.3 and that my recovery partition is 10.8.2?

Is the TM backup complete? When you Enter Time Machine, do you have snapshots going back in time?
See here for info on a problem Pondini has found with Time Machine that may have affected you:
UPDATED: Serious Time Machine bug on Mountain Lion (Updated)
You may just have to restart your TM backups to get those folders backed up.
If you do have that issue, please post at his link. He is trying to get enough background info to pass to Apple to solve the problem.

Restore from time machine to SSD/HDD iMac

Similar Messages

Maybe you are looking for