Restrict changing the tax code in purchase order after goods receipt.

Hi,
Po is created with tax code x1.
Gr is done for partial quantity.
IR is still pending.
User has changed the tax code to x2.
This case we want to restrict the tax code change in PO after goods receipt.
Please advice.
Regards
Ravi Kumar

Hi Sumit,
Po created with wrong tax code x1.
Stores person has done the receipt and consumed the stock.
Now user has suddenly realised that tax code is wrong and changed the tax code in PO.
In IR we will use correct tax code and post the accounting entry.
Stock values will be adjusted properly. to stock ac if stock is there and to price diff ac if stock is consumed.
Point is user's are asking that how system is allowing to change the tax code after receipt.
Point to be attended is restrict the change of tax code by any means after Gr has happened.
what are the possibilities to restrict the change of tax code.
Regards
Ravi Kumar

Similar Messages

  • How to activate the Check box in Purchase Order after Goods Receipt

    Hi All,
    How to activate the check box after Goods receipt of Purchase order in Item view (Goods Receipt is completed).
    Where t make the settings in SPRO.
    Regards,
    Shailendra Hadkar

    Hi
    SPRO - SAP IMG- Material management - Inventory management and physical inventory - Goods receipt - create purchase order automatically - activate auto Po creation for movement type.
    Then activate the auto PO creation in Vendor master - Purchasing view
    Check it out.
    Regards,
    raman

  • Change the Tax Code-  In Sales Order i have  Tax code for VAT

    In Sales Order i have  Tax code for VAT ( Condition type JIVP) it is reflecting "P4" instead of "A4".
    Where the "P4" Tax code is picking in Sales Order.
    How to change the Tax Code.
    Urgent

    Hi CHAKRI,
                     Check if the condition record is maintained with the appropriate taxclasssification.If yes, Go to sales order in change mode,then goto-header-billing-alternate taxcalssification and modify tax classification.It will pick up right tax code.
    Regards
    Ram Pedarla

  • Change of Purchase order after Goods Receipt

    Hi Guys,
    Can the Purchase order be changed after the Goods Receipt??
    If then what is the transaction Code used or what are the steps followed for the change of PO after GR(goods receipt)???
    Regards
    Jino

    Sir,
    It's not possible to change the PO for specifica line item if GRN exist against it..
    Pl revese the GRN and then ammend the PO in terms of quantity or price or delievery schedule..
    The Relase strategy for PO will get affected..
    Typical exception..
    In certain cases it can be seen.
    The GRN exist for line item..
    The ammedndment done in TAX breakup resulting in  derelease of PO..
    and again PO has been release..
    So Sir,
    If the changes is in terms of quantity then pl reverse the GRN..
    Otherwise go for ammndments,,with the pending GRN..
    Edited by: nj on Jun 9, 2009 8:46 AM

  • Automatic Purchase Order upon Goods Receipt 101/161

    Hi Guys,
    Hope everyone is well. I would like to know in as simple terms as possible, what is the use of Automatic Purchase Order upon Goods Receipt mvt 101 or 161. Can someone explain to me the purpose of this? or applicable in which type of business scenario?
    Because i think, if it is upon Goods Issue, then it is understandable, you would want to top up the stocks, but upon GR? Why?
    This is a non configuration question, just a business process question..

    >
    Nazrin84 wrote:
    > Hi Guys,
    >
    > Hope everyone is well. I would like to know in as simple terms as possible, what is the use of Automatic Purchase Order upon Goods Receipt mvt 101 or 161. Can someone explain to me the purpose of this? or applicable in which type of business scenario?
    >
    > Because i think, if it is upon Goods Issue, then it is understandable, you would want to top up the stocks, but upon GR? Why?
    > This is a non configuration question, just a business process question..
    This process is used in case of emergency when stock is required in the plant and we dont have time to first create PO and then get its approval and follow the normal process. In the case of emergency, we tell the vendor to deliver the material and on receipt of this material we take it into the system through GR and the corresponding PO is automatically generated.
    Usually this is option available in system, but it depends on the clients requirement whether they want this option available to end users or not. Mostly our clients prefer not to have this option enabled, as this way can lead to irregularities by the users.
    So they prefer to follow the normal process, but this process for above scenario is followed on war footings that way the GR takes place immediately when Goods are received.

  • Change the tax code at order header level that reflect the change in all it

    Dear consultant,
    Change the tax code at order header level that reflect the change in all items lines under this order
    Facts:
    Define tax code,
    Assign it to bill & ship to customers,
    I do all setup in oracle receivable guide for defining tax
    Examples: I navigate to order management to create order
    First I select the customer and order type after that I navigate to tab line
    I enter the item in the first line the tax code coming by default
    I enter the second items line also the tax code coming by default etc three ,four, five until line 40
    Now I want to change the tax code for all items but not by enter and change it in each line? No,
    I want the way that I change Tax Code at order header after that the change is reflect in all items line
    Business Impacts:
    Suppose I create order include 40 items , I want to change the tax code that coming by default , that require me to enter in each line to change tax cod 40 times ,this not logic and not acceptable from my customer

    Hi,
    The defaulting rules apply only for the first time when you are adding new lines on to the Sales Order. Respective field vaues will be defaulted from the SO header level.
    In case, if you want to update all the 40 lines for Tax Code in one shot, then please select all the lines on the sales order, try Mass Change.
    (Navigation: Tools->Mass Change).
    Regards,
    Hemanth

  • How Create new Tax code in Purchase order

    Dear Sir,
    I have creat new tax code in Purchase order
    Basic value          3976876.53
    Ex Duty          10%     397687.6525
    edu.cess          2%     7953.75305
    s&h Edu.cess     1%     3976.876525
    Toatal               4386494.81
    CST          1%     43864.94807
    Addition                12550.00
    i have all ready tax code 1021+5vat

    Hi Sneha Patel
    Case1:
    If tax is applicable on the freight charges then create a Z condition in (Tocde M/06) and assign it in ur pricing  procedure (Tocde M/08) before the net value is calculated in ur pricing procedure so that it is taken for tax calculation.
    Case2:
    If tax is  not applicable on the freight charges then create a Z condition in (Tocde M/06) and assign it in ur pricing  procedure (Tocde M/08) after the net value is calculated in ur pricing procedure so that it is not taken for tax calculation.
    For both the conditions select
    Cond. class   A Discount or surcharge
    Calculat.type B Fixed amount
    Cond.category B Delivery costs
    Also mark as a header or item condition with accruals checked.
    If u are not sure then copy FRA1 condition in STD and change Calculat.type  as B Fixed amount instead of % in FRA1 so that u can enter the amount directly in PO.
    Also mark these conditions as manual in ur pricing procedure so that these can be entered manuall in PO if reqd.
    While creating PO u can select the reqd condition (with or without tax) under conditions tab and enter the amount.
    hope it clears ur issue
    Chk and revert
    Reg
    Raja

  • Output Tax Code In Purchase Order

    Hi all,
    It's possible to assign an output tax code to a purchase order?
    The system gives me the error message 6164 'Please enter an input tax code, not an output tax code' when I use an output tax . Is there any customization to allow output taxes in purchase orders?
    Thank you,
    RS

    Dear friend...
    You cannot use output tax code in purchase order, since output tax codes are used only for sales. If you use output tax code in the PO it will obviously throw the error you said. If you want to have the taxes as shown in the output taxes, if not present in  your input tax codes, you can create new tax code which you desire. Output codes are only for the Sales Order.
    Hope it helps re-ward if so
    Suraj

  • Change the tax code issue in fs00

    Dear Sapgurus,
    in production i create one g/l code user id : mydr123 T code is fs00 g/l code number 300000 account name is sales, account group is p&l and account currency inr, tax category ">" , now i am going to change tax category * while saving the g/l system is not accepted  itsshowing error message "     1) Changing the tax code not possible; account has a balance
    2) The data contains error, you cannot save, but if i choose"-" its accepted please tell me
    Regards
    Myfriend

    Hello MyFriend,
    If you wish to make a direct posting to a tax account you must have
    the gl account active in transaction MIRO.
    Please review the online documenation located via help -> sap
    library -> materials management -> logistics invoice verification ->
    Direct postings -> direct posting to gl account
    here you can see the setttings for same in customizing are
    Setting in Customizing for Logistics Invoice Verification
    As per error message FH081, it arises only if the account had perviously
    the tax category ">" or "<". They cannot be changed anymore
    if the account has a balance. The tax categories "-", "+", "*" etc.,
    can be changed, you will get in FS02 only the warning FH011.
    Please check GL account xxxxxx with FBL3N, to see if there is a balance
    still left. To make the account balance zero, you might try transaction
    FB41, this allows you to post directly a balance to the Tax gl account
    even when the flag "Post to automatically" is set.
    I hope this helps
    Regards
    Ray

  • Changing the Tax Code in the GL Master

    Hi Friends,
    The users have created a GL Account with only 'Input Tax' allowed in posting. Now they want the 'Output Tax' also to be activated. When we try to change the Tax Code to allow all types of Taxes, the system gives an error message - "Tax Code cannot be changed as the postings exist". How can we change the Tax Code now? Is it that we have to nullify the balance in this account?
    Thanks for the help.
    Regards

    Hi,
    According to me, if you change the error to warning, it wont affect any previous postings but it will allow to extend the tax code to further future postings which is required. So i don't think so that it will affect your existing postings.
    Regards,
    Jigar

  • Formatted Search that will change the Tax code in SO.

    Hi All,
    I have a requirements that will allow me to change the Tax Code column via formatted search. Like for exmaple, i have 50 line items in SO and the tax code is ZO. If i want to change the tax code, i will select it for individual items. Anyone can help me to have an alternative solution that will prevent me to change it per item.?
    thanks and regards,
    vin

    Hi Melvin........
    You can have a work around for this....
    Just create a UDF say U_Tax at Header level...
    Just Create a FMS for Tax Code say..
    SELECT *  FROM OSTC T0
    Save this tax code FMS to thus UDF.
    When yo select a particular Tax Code in this Field through this saved FMS
    this Tax Code gets copied to each and every line say for 100 lines also.
    For this you have run other FMS which is below...
    SELECT $[ORDR.U_Tax.0]
    Save above FMS in tax Code field say in Sales Ordr form.
    Now when you do this you can see if you have 100 line items and you want to copy same tax code in a single click you have to just select single tax code via FMS in U_Tax as i suggested.
    The moment you select this Tax Other FMS will be fired and the same will be copied to other 100 lines....
    Hope this will help you.....
    Regards,
    Rahul

  • Purchase Order Module  - Goods Receipt PO - Goods Return - AP Invoice

    Hi all expert,
    I have a senario is :-
    Open Purchase Order Module  -> Goods Receipt PO -> Goods Return -> AP Invoice
    Puchase Product A by "Purchase Order" with Qty 6,000 After "Good Receipt PO", found out 3,500 pcs is out of spec then "Goods Returns" 3,500 pcs. Then continue do "AP Invoice" with Qty 2,500 pcs.
    Question is 1 week later, the supplier replacement back 3,500 pcs, so how am i going to start to steps? since PO have been close.
    When i at  "Goods Receipt PO" wanna to copy from "Goods Return", it is show nothing.
    Your advise is highly appreciated.
    Thanks.
    Regards,
    Danny

    Hi Danny
    i think you have to create a new PO then GRN then PI...since you copied the PO to GRN it will show as closed as there is a target doc. linked to the PO. A PO can be changed only if there is no target doc linked to it .
    Hope this helps.
    Bongani

  • Report to Purchase Orders with Good Receipt and pending for Invioce Receipt

    Hello,
    I'm looking a report bring me Purchase Orders with Goods Receipt and waiting for Invioce Verificacion (MIRO).
    I appreciate any help.
    Regards,
    Hector

    Hi,
    ME2N - In selection screen, enter Selection parameters as
    WE102 i.e. Goods receipt exists and in output screen put a filter on "Still to be invoiced (qty)" and "Still to be invoiced (val.)" as not equal to zero OR greater than Zero.
    OR use RECHNUNG i.e. Open invoices and execute the report
    OR Use MB5S - GR/IR Balances

  • Last purchase order and goods receipt for material

    Hello to everyone,
    is there any standard report where I can see the last purchase order and goods receipt for a material?
    Regards

    Hi,
    Latest PO you can get from ME2M, by giving input as material and scope of list as best.
    Latest GR date can be get from MB51, by giving input as Material and movement type as 101.
    Regards,
    Prabu

  • Tax Code removed on changing the posting Date in Purchase Order

    Dear All,
    This is with reference to the Purchase Order Document tax part, the document has been defined with the approval procedure and document series followed as annual series. The document series is linked to the period indicator as I am using the monthly series for the A/R & A/P Invoice.
    Now some Purchase Order was generated in the last month i.e. 30 NOV 07 which has gone for approval. These document are approved in the current month (Dec 07) & user are trying to add the records it displays the message as "Date deviates from permissible range [Purchase Order - Posting Date]  [Message 173-11]" as the period indicator is changed to Dec 07 in document numbering.
    The problem is when user changes the document date to Dec 07 for posting; system removes the tax codes, which is available in the document. Now as this is approved document user is not able to change or renter the tax codes.
    In this situation what can be done as the same case will again happen for the next month.
    Pls. provide the solution / work around for this problem.
    Regards,
    Yogesh Jadav

    hi yogesh,
    Cancel/Close the created purchase order.
    First you should change docduedate in posting period upto december 2007/end of fiscal year,by following the below path.
    (Administration->sytem intialization-> general settings--> posting period tab)
    Create a new purchase order.
    Send it for approval,authorizer can change date as required,
    once the posting date changes,tax code get refreshed,authorizer
    need to select tax code once again.
    <b>Tax code normally get refreshed when you change posting date it's normal
    system behaviour.</b>
    After authorizer does above changes,he can approve purchase order.
    Once purchase order is approved,orginator can add it as purchase order in draft stauts.
    <b>After approval we can not do any changes in purchase order.</b>
    Hope my solution will solve the problem.
    Thanks,
    With regards,
    A.Jeyakanthan

Maybe you are looking for