Restrict Drop Down values .
Hi All ,
I am modifying SRM screens which is a Dynpro screen .
I have a requirement that on a certain condition some values of the drop down should be removed .
i.e if there are 5 values , i need to show only 3 values if a particular condition is met .
Can somebody guide me on how to go about this ?
Regards,
Ambar Patil
Hi Ambar,
in ur drop down by key, u need to APPEND value TO set, depending on the particular condition, accordingly.
DATA: value TYPE wdy_key_value,
set TYPE wdy_key_value_table.
// now check ur condition here and append accordingly.
IF condition1.
APPEND value TO set.
ENDIF.
regards,
Amit
Similar Messages
-
I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. Can I fix this?
I'm fairly new to this, but I think it has to do with the way you have the drop downs named. Did you copy one then keep pasting it in each field? If so, that is the problem. You should rename each one with a different number: Dropdown1, Dropdown2, etc. I think that might solve the issue.
-
HCM F&P - How to set the field as Required based on drop down values
Hi Experts,
I have a requirement to set the Date field as mandatory when a particular value is selected in drop down list. I have already tried with MessageBox though it displays the error message but process moves further i.e. on clicking Check & Send button it throws an error message but still it moves further and i can see only Send button. Ideally it should halt there itself.
Thanks & Regards,
Jitesh TalrejaThanks for your valuable inputs
Chintan
I have already tried this. It only highlight the field with the red border but still allow to move further.
Mukesh
Yes, we can definately control this from the backend but that would be the last option i should execute. Ideally, this is something to be controlled in front end itself
Poornima
By setting the field attrbiute Required will set the field mandatory as a whole irrespective of drop down values or any other UI element.
Regards,
Jitesh Talreja -
Drop down values for table in a view not getting populated dynamically
Hi Experts,
The problem which i am facing is as follows
In an existing web dynpro component , i already have a view and it consists of table which has 3 columns.All the three columns are non editable
MATERIAL MAT_DESC MAT_DEL_FLAG
ABC
EFG
HIJ
Now i need to add 2 more columns after the MAT_DEL_FLAG.These two PLANt and STORAGE LOCATION columns must have drop down values
The context refers to a standard Database ZTABLE to which these two fields are added.
MATERIAL MAT_DESC MAT_DEL_FLAG PLANT STORAGE_LOCATION
ABC
EFG
HIJ
The Plant column must have the drop down values based on Material .
If we select some value for Plant , then based on the value of plant the storage location drop down values must be populated.
So as per this logic , the drop down values for plant for each row must be different.
Please let me know how to achieve this.
This is a normal table and not an ALV table.
Also please let me know whether the drop down field must be drop down by key or drop down by index.
This is very urgent.
Thanks in advance
SindhuRefreshing things again for you -
1. As I have already pointed, create 2 context attributes for VALUESETS for both plant and St.loc.
2. Create dropdown by indexes for both of them, assign valusets to respective attributes using node information.
3. Go to the plant dropdown and create the action for it ONSELECT event - when you chagne the dropdown of plant then populate the respective storage loc.
4.Now, As you are selecting a row (leadselect) you have populated the plant and loc details....write the code for lead selection event of the table
You will get the lead selection index right using node interface (IF_WD_CONTEXT_NODE)
LOOP AT ITAB INTO WA_ITAB.
if sy-tabix eq lv_lead_index.
clear wa_valuset.
wa_valueset-key = 'X'. "plant
wa_valueset-value = 'X'.
append wa_valueset to it_valueset1.
* popultae the storage location valuset based on the plant selected (bydefault it is 1 right in dropdown)
clear wa_valuset.
wa_valueset-key = 'XX'. "storage loc
wa_valueset-value = 'XY'.
append wa_valueset to it_valueset2.
else.
* Fill the valusets for all other rows as different or as per your requirement.
endif.
wa_itab-valuset1 = lt_valueset1.
wa_itab-valuset2 = lt_valueset2.
modify itab from wa_itab transporting valuset1 valuset2.
clear wa_itab.
ENDLOOP.
lo_node->bind_table ( it_tab).
Now for that Row, if a plant value is changed, respective storgae loc has to be filled right...then in that ONSELECT of plnat drodpwon again you need to write a piece of code...using the same code with a little modifications.
Hope this is clear.
Check this article on the same - but here ALV is used...the concept is same use it for your table -
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0cbdde3-fe58-2c10-fcbc-8db18e693877?QuickLink=index&overridelayout=true
the above code you hvae pasted - i think it fills only for the 1st time....
Regards,
Lekha.
Edited by: Lekha on Dec 20, 2011 12:00 PM -
Crystal report Chose from List or drop down value in parameter from UDT
Hi Experts,
I had face a issue while creating a report for my client in crystal report , I had create a report and in the parameter field I want to select the value from the chose from list or drop down value from the User define table.
In parameter had written field as : Code@Select * from dbo. [@UDT] ; but in the report filled I am not able to select the value.
Please Help me ! Thanks in Advance. :HI
Welcome to the Forum...
You cannot put all the values in a single parameter field so you need to select each field for each parameter...
Better you post it in this link for more reponses:
Reporting and Printing -
We have three drop downs (ddlRotation, ddlOnCallType and ddlHospital) in our webpart. All values are being populated dynamically. One from list (ddlHospital) and other from tool part properties. For dropdown populated from list, we are storing values in
View State.
WebPart is working fine in development environment (single machine) while on production ( 1 front end, 1 index and 1 db server), drop down values disappear after post back. Below is the code.
protected void Page_Load(object sender, EventArgs e)
try
if (!Page.IsPostBack)
LoadData();
if (!string.IsNullOrEmpty(webPart._rotationDetail))
ddlRotation.Items.Add(new ListItem("All", "0"));
int i = 1;
string[] strRotationDetail = webPart._rotationDetail.Split(':');
foreach (string str in strRotationDetail)
ddlRotation.Items.Add(new ListItem(str, i.ToString()));
i++;
if (!string.IsNullOrEmpty(webPart._onCallTypes))
ddlOnCallType.Items.Add(new ListItem("All", "0"));
int j = 1;
string[] strOnCallTypes = webPart._onCallTypes.Split(':');
foreach (string str in strOnCallTypes)
ddlOnCallType.Items.Add(new ListItem(str, j.ToString()));
j++;
catch (Exception ex)
private void LoadData()
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite spSite = new SPSite("SITE_URL"))
using (SPWeb spWeb = spSite.OpenWeb())
SPList oList = spWeb.Lists[webPart.destListName];
SPListItemCollection setuplistItems = oList.Items;
if (setuplistItems != null && setuplistItems.Count > 0)
DataTable dtSetupData = setuplistItems.GetDataTable();
if (ViewState["SetupData"] != null)
ViewState.Remove("SetupData");
ViewState.Add("SetupData", dtSetupData);
else
ViewState.Add("SetupData", dtSetupData);
LoadHospitalCombo();
dateControl.SelectedDate = DateTime.Now;
else
// some error message
private void LoadHospitalCombo()
if (ViewState["SetupData"] != null)
DataTable dt = (DataTable)ViewState["SetupData"];
DataView dv = dt.DefaultView;
ddlHospital.Items.Clear();
ddlHospital.DataTextField = "TITLE";
ddlHospital.DataValueField = "TITLE";
ddlHospital.DataSource = dv.ToTable(true, "TITLE");
ddlHospital.DataBind();
ddlHospital.Items.Insert(0, "All");
Any help?
http://farhanfaiz.wordpress.comRunning your code in try/catch and doing nothing on exception, is not a good idea. Please try to put logging in your code as I believe your code is throwing exception. It's difficult to say seeing such a code what's wrong. Maybe the list doesn't exist or
exists with different name/title, or viewstate is disabled or webpart properties are not populated... there's so many possibilities. Also if possible refactor your code as shown below:
//Your Code, you are loading all items from database and then counting it
SPListItemCollection setuplistItems = oList.Items;
if (setuplistItems != null && setuplistItems.Count > 0)
//Refactored Code
if (oList.ItemCount > 0)
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com -
SCAC Field Should have Drop Down Values and ASN should have Storage locatio
Hi ,
We have a requirement while creating ASN in which we have to add SCAC ID in the SCAC field ( Carrier) this SCAC ID comes in Shipping details - We want to have drop down values in this field and also if we dont enter value in this field An Error Message should come like " Maintain SCAC code.
And also the PO's coming from ECC are not carrying Storage location information - Is there a specific config / enhancement to be done.
And in ASN can we have Storage location ?
Thanks,
MaheshHi Mahesh
Regarding adding fields to UI
Refer below links
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0b0e544-7a06-2d10-539d-f8648358ba67?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/display/SCM/SAPSupplyNetworkCollaboration%28SAP+SNC%29
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/908c1e69-0a01-2d10-e7a6-98ca00f19aa6?quicklink=index&overridelayout=true
Not sure how to maintain it as a drop down, a developer could help you easily with that.
Regarding Storage location from PO ECC.
If you are using idocs, the standard SAP xml conversion will not be able to transfer this(if you download standard content)
You can find the field in your IDOC ORDERS05, Data records-Segement-E1EDP01FIELDLGORD
In order to transfer this, you need to rewrite the xml format in integration builder of XI/PI and then add some UI fields in Webui
to show.
But xml PurchaseOrderERPReplenishmentOrderCollaborationNotification as of SAP ECC EHP4 can carry this information in its payload document(SXI_MONITOR---INBOUND MESSAGE ---PAYLOADS) Under the node INVENTORY MANAGED LOCATION
Not sure where this field is mapped to .........
I will let you know once i find........Mean while you can ask any developer who worked on webdynpro .
Yes we can have this field once we find where it is mapping, if you are using idocs then even the XML has to be build in PI
accordingly.
Best Regards
Vinod -
Retrieving the drop down value used in wdr_select_options for default
Hello Experts,
I populated drop down using the method add_parameter_field by using WDR_SELECT_OPTIONS component.
Now my requirement is I need to default the value in some other parameter field based on drop down selection value.But the problem is WDDOMODIFY method is not triggreing while selecting the value from this dropdown for defaulting the value and even there is no method or option in the interface if_wd_select_options for creating an action while selecting the drop down like on slect in our manually creation drop down.
Please let me know if there is any solution for this.
Thanks and Regards,
VenkatHi venkatesh,
The eventhandlet ONENTER of WDR_SELECT_OPTIONS wont work for the drop down and also
there is no ONSELECT event of drop down in select options.
So i think there must be some kind of button action.
As you told you need to default the value of selection screen field based on drop down selection
why dont you remove that field from selection screen as you can however use the value later
while executing depending on drop down value. -
Hi experts,
I want to create a Drop down in forms with values from Web dynpro Abap Node(0..N) and enable / disable other fields based on selected Drop down value. I binded the data source to DD but values are not populated in it. Please help me to fill values and do validation on selected dd value ....
-RKHi RK ,
I made an dropdownlist link with a parameter of the interface without trouble, so i thnik the only way to solve your problem is to populate an internal table which is send to the forms thru the interface.
Hope this help you
Regards -
Drop down Values in Adobe form
Dear All,
Greetings.
I am using the Adobe interactive form for E Recruitement(copying the standard and changing it as per the requirement). When i am using the Drop down value for one of the field. Instead of the drop down its showing as a POP-UP with all the possible values.
I am not able to predict what the problem is. I need to have a drop down, instead of the pop up.
Please help me in solving the issue.
Thanks
Ram MHi Ram,
Please use a Enumerated Drop down list ffrom the library, seems currently you have Extended Value selctor in your form.
This will hopefully resolve the issue.
Regards,
Arafat -
Drop down values in Adobe print form, WDA.
Hi All,
I would like to know, how we can dynamically display drop down values in an interactive form developed either through report programme or WD ABAP.
I passed an internal table, but it didnt work.
I tried the ISR way, even then i couldnt get much success.
I even tried using the dynamic properties.
As per my understanding, i need to pass the values as index- text pairs and add some script to the field.
Kindly help on the steps i need to follow. Any suggestions are welcomee [:)]. I require to fetch the DDL values from database tables.
Kind Regards,
- anto.hi,
to populate the dropdown list you can do it...
1). manually or
2). by code
1). <b>manually</b> go to interactive form->edit
go to Object tab->field tab ->
you must see something like
List Items :
Text + x
click on the green + sign...
it promps you to type. type in the value press enter... and so on...
2) <b>by Code...</b>
//set up contents of a drop down list dynamically...
IWDAttributeInfo countryInfo = wdContext.nodeTravelData().getNodeInfo().
getAttributeInfo().getAttribute("DestinationCountry");
ISimpleTypeModifiable countryType =
countryInfo.getModifiableSimpleType();
IModifiableSimpleValueSet countryValueSet =
countryType.getSVServices().getModifiableSimpleValueSet();
countryValueSet.put("1","Germany");
countryValueSet.put("2","UK");
This will work....
regards,
-amol gupta -
Drop down values in Adobe Forms vanishes upon Check and Send in HRAS
Hello
The drop down values in Adobe Forms vanishes upon Check and Send while initiating the process.
I also get the error , u2018 The Entered Value is not on the List of Valid Valuesu2019 when I select the values again and try to SUBMIT.
We are in EHP4u2026 and I am seeing many Notes has been released to address these issues in EHP3 itself..
Request your help and supportu2026.
Thanks
Meena VenkatesanHello
Thanks for the swift response.
We applied the Note 1413209 and 1403266. The fix didnu2019t work.
I noticed the SAP Note 1403266 mentions a prerequisite Note 1346443 which is for SP4.
We are currently in SP5 and our system mentions Note 1346443 as u2018Cannot be Implemented. u2018
Please advise. -
Populate Drop down values to Adobe forms
Hello,
I am in the process of developing the HCM forms for PCR's. This is using old technology. How can I pass values to the Adobe forms based on certain condition selected in previous screen. For eg. Based on Position selected, I should have a certain value in Drop down pre-selected on the next screen and when the user does a drop down a list of the values should be listed. Where should do the coding for the subsequent drop down values?
Appropriate points rewarded.
PrasadHere a change in the question below. Based on Position selected, I should have a certain value in Drop down pre-selected on the next screen from table IT1008
and when job is selected drop down from table T500P should be listed. Does this need to be handled in badi or in the Adove form scripting?
Thanks
Prasad -
Need to delete drop down values of activity in travel request portal
Hi,
We need to hide/delete few of the drop down values from activity in travel request creation in portal, i know that if we delete in R/3 it will effect here, as per the client requirement we need values in R/3 system but that few of the values should not appear drop down list .
Regards
GaneshHi Ganesh,
Try the below code in POSTexit of WDDOMODIFYVIEW( ) method of your view
DATA drp_info TYPE REF TO if_wd_context_node_info.
data lo_node type ref to if_wd_context_node.
DATA drp_value_set TYPE wdr_context_attr_value.
DATA drp_value_list TYPE wdr_context_attr_value_list.
DATA index TYPE n.
DO 5 TIMES.
index = sy-index .
CONCATENATE ' Value ' index INTO drp_value_set-value SEPARATED BY space.
CONCATENATE ' Value ' index INTO drp_value_set-text SEPARATED BY space.
INSERT drp_value_set INTO TABLE drp_value_list.
ENDDO.
SORT drp_value_list BY value.
DELETE ADJACENT DUPLICATES FROM drp_value_list COMPARING value.
lo_node = drp_info->get_child_node('GENERAL_DATA').
drp_info = lo_node->get_node_info( ).
drp_info->set_attribute_value_set(
name = 'T_ACTYPE' value_set = drp_value_list ).
Hope this helps you.
Regards,
Rama -
Technical names for drop down values through webui
Hi All, I have ECC 6.0 (SAPKH61705) transactions being launched in CRM 7.0 (SAPKU71305) through the transaction launcher. We are able to display technical names for values in ECC through the gui, and in CRM in both the gui and webui. Is it possible to display the technical names for ECC through the webui? Apologies if this is not the correct forum, I was not sure where to post. For further clarification of the issue, I hope these screen shots assist: ECC gui with 'display technical names' activated: qui - tech names on.jpg CRM webUI with 'display technical names' activated in both ECC and CRM: webui - tech names not visible.jpg Assistance appreciated.
Hi Amy,
Yes, it's possible.
You can achieve it by coding. Instead of passing only the description to your drop down values, we can send technical name and description simultaneously to your drop down value. That's it.
BR,
RAM.
Maybe you are looking for
-
Header Fields not picked in Http Adapter
Hi , I am sending a few custom header fields that have been set up in the HTTP adapter but for some reason they are not picked. Any suggestions.. -Teresa
-
August 08 imac. Mighty Mouse wont scroll down.
Hey, I have August 2008 iMac and since about Febuary the mighty mouse will not scroll down. I havent been using it much (Had major pc problems... Been working on my pc alot.) and am moving it to somewhere where it will get used more. How can I get th
-
We are having an issue with adding flash demonstration and simulation activities created using Captivate v3. When inserting these flash files, we are setting them to run in a separate browser window. After the module is published, and I am given the
-
Hello, I'm not sure how does the SLA monitoring works... Example: sla monitor 123 type echo protocol ipIcmpEcho 10.0.0.1 interface outside num-packets 3 frequency 10!--- Configure a new monitoring process with the ID 123. Specify the !--- monitoring
-
Using NPOI to open both XLS and XLSX for reading
I am having an issue opening an Excel 2007 (xls) Workbook. I receive the following error: The supplied data appears to be in the Office 2007+ XML. You are calling the part of POI that deals with OLE2 Office Documents. You need to call a different pa