Restricted values are seen in the query

I have restricted few values in the query. when i execute the query those restricted values are displayed on the top. can any one tell me how to remove it.

As Paveen suggested, Open the Analyzer...instead of opening a query, open a workbook(the one you have saved already). Here, you van change the variable also and execute. It wont have restrivted value.
Thanks...
Shambhu

Similar Messages

  • Decimals not seen in the query...

    Hi Guys,
    I have a problem with the query..
    I have loaded a KF with 2 decimal places in the cube.
    But when I run a query created on the cube, the digits after the decimal place are not seen in the query.
    For e.g.  the value of the KF in the cube is 9.85...but in the query, it is seen as 9
    please let me know where do i need to make the changes.
    FYI..the unit of the KF is %. Has this got anything to do with the problem ?
    thanks in advance,
    Punkuj...

    Hi Aby,
    Sorry, i just missed to mention this imp point :
    I had done the operation that you have suggested :
    I am getting the following output :
    In the Cube : 9.85
    in the query ( after the decimal selection) : 9.00
    I hope that clears my problem..
    Thanks..
    Punkuj

  • Content Tab: None of the fact tables are compatible with the query request

    Hi All,
    **One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
    I have made a rpd the joins in physical layer as shown below:
    https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
    And the BMM layer as:
    https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
    Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
    Dim - Comment Code Details
    Fact - Complaint
    Dim - Service Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
    I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
    When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
    Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
    Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
    Thanks in advance,
    Dev

    Hi Deepak,
    Option 1:
    My tables in physical layer are joined as below:
    D1--> F1 <--D2--> F2 <--D3
    Same way i model it in BMM
    D1--> F1 <-- D2--> F2 <--D3
    Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
    I go Sources>content tab of Fact F1 I set
    Dimensions----------- Logical level
    D1---------------------- D1 Detail
    D2---------------------- D2 Detail
    D3---------------------- D3 Total
    then, I go Sources>content tab of Fact F2 I set
    Dimensions----------- Logical level
    D1---------------------- D1 Total
    D2---------------------- D2 Detail
    D3---------------------- D3 Detail
    Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
    I need to know whether the way I have modeled it in BMM is right,
    Option 2:
    I can combine the two facts in a single Logical Fact or the above design should also work.
    (F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
    what will be the content tab details?
    Thanks,
    Dev

  • Essbase answers - None of the fact tables are compatible with the query request "member"

    Hi,
    I have modelled an Essbase database into the repository.
    If I pull the measure, period and year dimension in and filter on the year (member) and display the year (member) along with the period (alias) and measure it errors with =>
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Fiscal Year.Fiscal Year Code. (HY000)
    However, all other things being equal if I change the year displayed to the alias then it works.
    Anyone tell me why??
    Is there a limitation that Essbase brings through that you cannot view what you filter on?
    thanks,
    Robert.

    Hi
    i have done the content level setting in each of the table, D1,F1 and F2(LTS), now i am getting the following error..
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Gl Sets Of Books) does not contain mapping for [Code Combinations.Code Combinations.Affiliate, GL Balances.GL Balances.Currency Code, GL Balances.GL Balances.PTD_Balance, Gl Sets Of Books.Gl Sets Of Books .SoB Name]. (HY000)
    Gl Balances : D1
    Code Commbination: F1
    Gl Sets Of Books : F2
    I have checked the joins in physical and BMM layer..all are fine..

  • Fact tables are compatible with the query request

    Hi,
    i am using 11g.In 10g working fine without any error.After migrate 10g into 11g below error will returning. What is the problem and How we will fix.Could you pls let me know.Thanks
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request FACT_AGENT_TIME_STATISTICS.FKEY. (HY000)
    SQL Issued: SELECT s_0, s_1, s_2, s_3, s_4, s_5, s_6, s_7, s_8, s_9, s_10 FROM ( SELECT 0 s_0, "Team Performance"."DIMENSION - LOCATION"."COUNTRY CODE" s_1, "Team Performance"."DIMENSION - TIME"."BUSINESS DATE" s_2, CASE WHEN "Team Performance"."DIMENSION - TEAM"."ROLE" ='TEAM LEADER' THEN 'Team Leader' ELSE "Team Performance"."DIMENSION - TEAM"."TEAM" END s_3, CASE WHEN '30 Mins Interval' ='15 Mins Interval' THEN "Team Performance"."DIMENSION - TIME"."15 Mins Interval" ELSE "Team Performance"."DIMENSION - TIME"."30 Mins Interval" END s_4, ((SUM("Team Performance"."FACT - AGENT CALL STATISTICS"."TIME - ACD CALL HANDLING"+"Team Performance"."FACT - AGENT CALL STATISTICS"."TIME - AFTER CALL WORK (ACW)")+SUM("Team Performance"."FACT - AGENT TIME STATISTICS"."AVAILABLE TIME"))/60)/(COUNT(DISTINCT "Team Performance"."FACT - AGENT TIME STATISTICS"."DATE ID")*"Team Performance"."FACT - AGENT TIME STATISTICS"."INTERVAL TYPE") s_5, (SUM("Team Performance"."FACT - AGENT TIME STATISTICS"."AUX3 - TRAINING"+"Team Performance"."FACT - AGENT TIME STATISTICS"."AUX4 - MEETING"+"Team Performance"."FACT - AGENT TIME STATISTICS"."AUX5 - PROJECT"+"Team Performance"."FACT - AGENT TIME STATISTICS"."AUX6 - COACHING")/60)/(COUNT(DISTINCT "Team Performance"."FACT - AGENT TIME STATISTICS"."DATE ID")*"Team Performance"."FACT - AGENT TIME STATISTICS"."INTERVAL TYPE") s_6, (SUM("Team Performance"."FACT - AGENT TIME STATISTICS"."STAFFED TIME")/60)/(COUNT(DISTINCT "Team Performance"."FACT - AGENT TIME STATISTICS"."DATE ID")*"Team Performance"."FACT - AGENT TIME STATISTICS"."INTERVAL TYPE") s_7, COUNT(DISTINCT "Team Performance"."FACT - AGENT TIME STATISTICS"."DATE ID")*"Team Performance"."FACT - AGENT TIME STATISTICS"."INTERVAL TYPE" s_8, MIN("Team Performance"."DIMENSION - TIME"."FULL DATE TIME") s_9, REPORT_AGGREGATE(((SUM("Team Performance"."FACT - AGENT CALL STATISTICS"."TIME - ACD CALL HANDLING"+"Team Performance"."FACT - AGENT CALL STATISTICS"."TIME - AFTER CALL WORK (ACW)")+SUM("Team Performance"."FACT - AGENT TIME STATISTICS"."AVAILABLE TIME"))/60)/(COUNT(DISTINCT "Team Performance"."FACT - AGENT TIME STATISTICS"."DATE ID")*"Team Performance"."FACT - AGENT TIME STATISTICS"."INTERVAL TYPE") BY CASE WHEN '30 Mins Interval' ='15 Mins Interval' THEN "Team Performance"."DIMENSION - TIME"."15 Mins Interval" ELSE "Team Performance"."DIMENSION - TIME"."30 Mins Interval" END, CASE WHEN "Team Performance"."DIMENSION - TEAM"."ROLE" ='TEAM LEADER' THEN 'Team Leader' ELSE "Team Performance"."DIMENSION - TEAM"."TEAM" END) s_10 FROM "Team Performance" WHERE (("DIMENSION - TIME"."BUSINESS DATE" BETWEEN timestamp '2012-11-23 00:00:00' AND timestamp '2012-11-23 00:00:00') AND ("DIMENSION - LOCATION"."COUNTRY CODE" = 'US') AND ("DIMENSION - LOCATION".DEPARTMENT = 'CSG')) ) djm FETCH FIRST 65001 ROWS ONLY

    Back up your repository before following these steps:
    1 Reduce the problem report to minimum number of columns required to generate the error. This will usually identify which dimension and which fact are incompatible.
    2 Open the repository in the Administration tool and verify that the dimension and fact table join at the physical layer of the repository
    3 Verify that there is a complex join between the dimension and the fact in the business layer.
    4 Check the logical table sources for the fact table. At least one of them must have the Content tab set to a level in the hierarchy that represents the problem dimension. This is usually the detailed level.
    5 Check the logical table source Content tab for the dimension table. Unless there is a valid reason, this should be set to blank.
    6. Save any changes to the repository.

  • Error: None of the fact tables are compatible with the query request

    Hi experts,
    I have one confirm dimension D1 and other two fact table F1 and F2 (F1 and F2 are connected to D1)
    when i create a report from D1 and F1 the report is running fine. But pull the column from F2 also in this report i am getting the following error
    None of the fact tables are compatible with the query request Code Combinations
    please suggest on the same.
    Regards,
    S

    Hi
    i have done the content level setting in each of the table, D1,F1 and F2(LTS), now i am getting the following error..
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Gl Sets Of Books) does not contain mapping for [Code Combinations.Code Combinations.Affiliate, GL Balances.GL Balances.Currency Code, GL Balances.GL Balances.PTD_Balance, Gl Sets Of Books.Gl Sets Of Books .SoB Name]. (HY000)
    Gl Balances : D1
    Code Commbination: F1
    Gl Sets Of Books : F2
    I have checked the joins in physical and BMM layer..all are fine..

  • None of the dimension tables are compatible with the query request

    Hi,
    i am experiencing the below error while querying columns alone from employee dimension (w_employee_d) in workforce profile SA. There is only one column in my report which is employee number coming from employee dimension. when i query other information like job, region, location etc i am not getting any error. the below error appears only when querying columns from employee dimension. the content tab level for the LTS of employee dimension is set to employee detail.
         View Display Error
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14077] None of the dimension tables are compatible with the query request Dim - Employee.Employee Number. (HY000)
    SQL Issued: SELECT 0 s_0, "Human Resources - Workforce Profile"."Employee Attributes"."Employee Number" s_1 FROM "Human Resources - Workforce Profile" FETCH FIRST 65001 ROWS ONLY.
    couldn't able to know the exact reason. Any suggestions would be highly appreciated.
    Regards.

    hi user582149,
    It is difficult to answer you question with such a little amount of details. Could you specify:
    - how many facts/dimensions are you using in the query?
    - what is the structure of your Business Model?
    - which version of OBI are you using?
    - what does your log say?
    I hope to tell you more having the information above
    Cheers

  • "None of the fact tables are compatible with the query request " error

    I've got a situation where I have two facts(Fact_1, Fact_2) and three dimensions(dim_1,dim_2,dim_3) in 1 subject area. I've got dimension hierarchies setup for all the dimension tables.
    Dim_1 is one to many to Fact_1
    Dim_2 is one to many to Fact_2
    Dim_3 is one to many to both Fact_1 and Fact_2
    I've set up the content levels for the LTS for the Facts so that they are the lowest grain for dimensions they join to and the grand total grain for dimensions they do not join to.
    My rpd is consistent. When I run a report using an attribute from Dim_3 and Dim_1 or Dim_3 and Dim_2, the report comes back fine.
    But if I try to run a report using all three Dim tables, I get an error and the message "None of the fact tables are compatible with the query request ".
    First of all, is it possible to make a report using all three dimensions?
    Second, what's the best way to trouble shoot this error? Why are none of the fact tables compatible? I thought as long as the aggregation levels were set to grand total for non-shared dimensions, Answers would be able to create the report properly.
    Any advise would be greatly appreciated.
    Thanks!
    -Joe

    OBIEE is looking for a fact that can link ALL the dimensions together. This is also known as the implicit fact ... you don't have a fact that can relate all the dimensions - you have 2 facts that together they can. Perhaps you need to great a single logical fact that has both LTS for your physical facts and try it that way.
    Then you'd have Dim1, Dim 2, Dim3 all being able to join to Fact1 (which is made of physical facts 1 & 2).

  • Ipad takes photo every time I close the cover of its case. When I close the cover - it really does take a picture and saves a photo. Luckly, it make a click, and pictures are seen in the photo album, and it does not appear to be forwarding.

    When I close the cover - it really does take a picture and saves a photo. Luckly, it make a click, and pictures are seen in the photo album, and it does not appear to be forwarding. It is just gobbling memory and annoying as I can only delete these pictures one at a time.

    It seems to take a picture of the counter top = I do not see the keyboard.
    I am wondering ....It may be a kids game app that takes pictures of the screen or out the back camera. I am starting to think it may just be a sound effect when placing the iPad on its screen. So many things that may be unrelated but coincedental. It started in May (the sound) and so did the multiple pictures - starting to think they are not related.
    Thanks for the quick tip on deleting multiple pictures.

  • After reinstalling game, the achievements from Game Center doesn't uploaded to the game and starts from the beginning . All the achievements are seen in the Game Center . How could I upload the last progress into the game?

    After reinstalling game, the achievements from Game Center doesn't uploaded to the game and starts from the beginning . All the achievements are seen in the Game Center . How could I upload the last progress into the game?

    Hello there, Elena Lyubina.
    The following Knowledge Base article offers up some great steps for troubleshooting issues with an application not functioning as expected:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • BO XI Desk-I graph The negative values are rising form the lowest value up

    The negative values are rising form the lowest value up. Instead of dropping from the Zero-line. Where is the problem originating?  BO FP2.3.
    The positives values are also rising from the lowest value up.
    The problem only occurs withing Desk-I. Within Web-I this problem does not occur.
    Edited by: A. SMULDERS on Sep 7, 2010 10:35 AM

    Hi
    Try with the following symbol in the field
    &ITAB-NETWR(>)&  - will write the sign  as (100.00-)
    &ITAB-NETWR(<)&  - will write the sign  as (-100.00)
    and based on some field  in the program write like
    If itab-shkzg = 'H'.
      itab-netwr = itab-netwe * -1.
    endif.
    and try to print this field in the form.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • How to hide a single value node hierarchy in the query designer

    Hi,
    I would like to perform a calculation  in the infocube. It concern  a count "Nb of different customers" with the following hierarchy : Country / region / City.
    This KF would be read at the same time by city, region and country, and  certain customers exist in 2 different region, and I have to count them only once by country.
    To do this, I added a new record (at the country level when loading infocube) to deduct a number of customers in doubloons.
    This line added contain only a country code and the number of cutomers in doubloons (- 23 when I have 23 cutomers in doublons) with revrese sign.
    Now, I would like to use this value (-23) to have a right Nb of different customers by country, without showing the not assigned line in the report hierarchy.
    How can I hide, in the query designer or the WAD, a single value node from hierarchy (NOT assigned) but take in account the value (-23) at the country level ?
    Is there another solution (more simple) to perform this in the infocube ?
    For information,
    1) The infocube is loaded once per month, and the KF (Nb of different customers" is also performed by month.
    2) I can't perform this in the report (performance problem with calculated KF).
    thx.

    Hi,
    the short answer is "you can't", the longer is: The ADF Faces tree component is stamped for better performance. This stamping means that nodes are not rendered as JSF objects but copies of an existing component (just with a changed value). For this reason the nodes don't issue their own query for data and thus cannot be refreshed individually
    Frank

  • Virtual Characteristic value not populating in the query output

    Hi Experts,
    I am new to BAPI and I am using this to populate the values of virtual characteristics.
    I wrote the below code to populate if an order status got some status value then i need to populate the flag y if not n.
    I got the order value in the reprot. I need to go to order master data and should get the status and then i have to do the comparision and populate the flag zww_teco in the report.
    The below is the compute method of my implementation class.
    FIELD-SYMBOLS :
    <fs_0cs_order> TYPE ANY,
    <fs_zww_teco> TYPE ANY,
    <fs_status>  TYPE ANY.
    if p_cha_0cs_order > 0.
      ASSIGN COMPONENT p_cha_0cs_order OF STRUCTURE C_S_DATA to <fs_0cs_order>.
    endif.
    if p_cha_zww_teco > 0.
      ASSIGN COMPONENT p_cha_zww_teco OF STRUCTURE C_S_DATA to <fs_zww_teco>.
    endif.
    Select single /BIC/ZSYSTATUS
        from /BI0/PCS_ORDER into <fs_status>
       where CS_ORDER = <fs_cs_order>.
    if <fs_status> CP 'TECO'.
      <fs_zww_teco> = 'Y'.
    else.
        <fs_zww_teco> = 'N'.
    endif.
    But I am not sure why the values are not populated. But when i debug , i could see the values for
    P_cha_0cs_order = 35
    p_cha_zww_teco = 54
    But i could get the values of <fs_0cs_order>, <fs_zww_teco> after assign component statement.
    And it is firing me a dump in select statement. Also when I click c_s_data i am getting S____274, S____505 fields like that in the structure but i could see p_cha_0cs_order
    Can you please guide where i am missing ...
    Thanks
    Vamsi
    Edited by: vamsi talluri on Nov 9, 2011 6:14 PM

    Hi Sushant,
      RSRT --> Enter Query Name
    Click on Technical Information --> If " Virtual Char./Key Figures " = Y
    In my case , even then i clciked generate report,
    even after that P_CHA_0CS_ORDER = 35
    and after assign component P_CHA_0CS_ORDER of structure c_s_data to <FS_0CS_ORDER>.
    the <FS_0CS_ORDER> is nothing , here i should get the value of cs_order value of that record but it is coming empty which i am not able to rectify. How should i change or i need to put any other setting to get the value populated into my <FS_0CS_ORDER>.
    Can you please guide me .
    Thanks
    Vamsi

  • Keyfigure values are incorrect in BEx Query based on infoset

    Hi Experts,
    I have created a infoset using 3 DSO's . 1 main DSO( from which i rquire all the data) is linked with other 2 DSO's using left outer join. DSO is linked with other 2 DSO's with a field return GUID .
    Now when i am executing a query , key figure values are coming incorrectly because suppose if there is 1 record related to
    RETURN GUID in main DSO and there are 4 reords in 2nd DSO with the same RETURN GUID then in infoset data 4 rows are getting created with the replication of all the fields from first DSO against those 4 rows. So in query result amount field is getting 4 times of its original value because of aggregation of all those 4 rows.
    I don't have set of key fields by which i can link the all the DSO's to get unique linking of records.
    How can i get the amount only one time in query result?
    Hope i am clear.
    Please help. I need to create report urgently.
    Regards,
    Ajay

    Hi Ajay:
    Please take a look at the blog series provided by Sunmit Bhandari.
    Infoset Keyfigure multiplicity Part 1
    /people/sunmit.bhandari/blog/2009/04/14/infoset-keyfigure-multiplicity-part-1
    Infoset Keyfigure multiplicity Part 2
    /people/sunmit.bhandari/blog/2009/04/14/infoset-keyfigure-multiplicity-part-2
    Infoset Keyfigure multiplicity Part 3
    /people/sunmit.bhandari/blog/2009/04/14/infoset-keyfigure-multiplicity-part-3
    Regards,
    Francisco Milán.

  • Spem fields are missing In the Query

    Hi this is a FI-Sales Query , under Material Group consists Bags,Caps,wallets ete like these lot of fields but in the query i am not getting all the field. in the query designer every thing is there some fields are not coming like Tie etc,But remeber this is Production Issue.I think u r clear with the issue.
    Any Help

    Hi kumar
    I guess what u are talking about is a values in the infoobject material group are not populating into the query.
    The problem is accordig to me is that the master  data for the material Group is deleted so thats the reason u can t find material group values in the query.
    If i have not understood the problem then restate the problem again in other words.
    If this solves ur problem then kindly assingn the points.

Maybe you are looking for

  • Satellite A100-998: Blue Screen error - nv4_disp.dll infinite loop

    I bought this laptop a month ago and I have a serious problem with 3d applications, 3ds max and video games. I receive a blue screen saying Error message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER nv4_disp.dll STOP: 0x000000EA (0x8408E6B8, 0x88D3

  • Apps wont Install

    Since the AppStore outtage, my apps wont update or install. it gives me error: "This app couldn't be installed, please use the purchase page and try again" which I did yet it gives me the same error! Any help? MBP late 11 13" OSX 10.10.2

  • Reading Contents of URL with Spaces in its Path (+other odd characters)

    Hi, I am looking for a way to get the contents of a webpage that has a pathname with odd characters in it. Here is my "contents reader":     public static String getURLContents(URL u){         try {             Scanner scan = new Scanner((InputStream

  • Compatible replacement hard drive

    My Pavillion Elite HPE-180t (p/n: BN515AV#ABA) has started to crash at random.  Support software is telling me the the HD is failing.  Error code: BIOHD-2 The HD that came installed is a HITACHI HDS721010C.  OS is Windows 7 (64bit) I haven't made any

  • 10g preview : bc4j_framework_installer.jar has 0 bytes

    While searching for a class file in JAR files, the tool I used stumbled onto an empty JAR file (zero bytes): <JDEV_HOME>\jdev\doc\ohj\bc4j_framework_installer.jar I don't know if this is (un)intended or that it may cause problems somewhere, but since