Restriction for  Characteristic in CT04

Dear Experts,
i want to restrict the characteristics which only certain user can access those characteristic. i already follow the http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d22ea5-7643-2c10-97a1-fd9e6e5683ef?quicklink=index&overridelayout=true documentation. i already create role which have authorization object    
C_CABN_GRP ,C_KLAH_BKL, C_TCLS_BER , C_TCLS_MNT . when i login with user which have those authorization, i still can change others characteristics. can you help me, in order i only can access one characteristic.
Regards,
dinie.

Hi Smily,
It means that these values are excluded from the selection. So all values except these ones will be retunred in the report. Generally we try to avoid exclusion as perf is bad and we try to exclude the values simply by including all others...need to balance with total # of values and # of values to be excluded.
Hope this helps...

Similar Messages

  • How to create a change request for characteristic(CT04)

    Hello ,
    I have crated a Characteristic using CT04 transaction in development system and I want to Transport to Test system....Is it possible or not??
    Thanks in Advance
    Preethi
    Message was edited by:
            preethi d

    Hi Preeti,
    No way you can transport  that, develop a uplaod program using BAPI other wise give me your mail id , i will send the code and the flat file, so that you can change according to your requirement.
    Thanks,
    Anitha

  • SID does not exist for Characteristic

    Hi All,
    We are getting SQL/SID error when we execute the query "Age inventory report by
    source plant" on Material Movement Cube.
    When run in RSRT in Debug mode we are getting both errors as mentioned below:
    Error while reading data; navigation is possible
    SQL Error: 0
    Unknown error in SQL interface
    System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE
    or
    ASID = 180 does not exist for characteristic Plant or is not selected              
    I>> Row: 28 Inc: MESSAGE Prog: CL_RSR_BASE                                         
    sometime the workbook runs fine without errors which uses the same
    query. but this is not often. when we run the query it shows SID error.
    I can mail the screen shots if needed,
    This is the Relpy from SAP:
              This kind of issue is often lead by overflow in the kefygures used in query.
              I could verify that query RIC_C03_ZQ06B_DETAIL_SOURCE01 is calculating ahuge amount of data.
              It is a common issue in this situation.
               Kindly check attached notes for extending key figures.
               460652 Extending key figures in BW
               579342 Changing key figures used in InfoProviders
    Just want to know if they are relevant, since most of the columns are Restricted KF or Formulas.
    We just have few keyfigures.
    Has anyone comeaccross such error, Plz suggest any actions.
    Thanks,
    Jo
    Edited by: Joseph Mundru on Jun 25, 2008 11:00 AM

    Hi,
    Check for any customer exit or SAP exit variable in the query...
    Hope this helps....
    Rgs,
    Ravikanth

  • Transaction MM02 - Restriction for the clasification tab

    Hi,
    My client requirement is to restrict the users while accessing the transaction code MM02 for the classification tab.
    Under the classification tab users should not allow to make a new enter and delete the existing entry under class area and Characteristic area.
    And I can able to restrict new entry and deletion of the existing entry under class area with respective of the existing auth.object M_MATE_STA.
    But i cant able to restrict the Characteristic area with respective of its class.
    I mean in the same screen below half of the screen contains Characteristic area and it also contains delete and new entry option which I canu2019t able to de-activate them.
    So please suggest me the best solution.
    Business Process - MM02 - Entry the material and select the basis data 1,2 and classification then go to classification tab and there will contains class area and Characteristic area.
    Thanks & Regards
    SV

    Hi SV,
    Please check the below auth objects, If I understood your issue correctly you can restrict the usage of characteristics through the below objects.Please check the SAP help on these, it has very useful information about characteristics and org areas.
    C_TCLS_BER Authorization for Org. Areas in Classification System
    C_TCLS_MNT Authorization for Characteristics of Org. Area
    Regards,
    Nanda

  • First resolve the inconsistency for characteristic Purchasing Organization

    Hi Experts
    In CT04 I changed the existing document type name.
    In Release Strategy- 02- FX - PO > 0 USD - Classification - Somehow the exiting purchasing organization i removed accidently
    Now when i select from the list to input experienced the below error.
    First resolve the inconsistency for characteristic Purchasing Organization
    Message no. C1813
    I deleted the respective document type in CT04. But still having the same error.
    please advise

    Hi,
    First delete the  the previous release strategy.For that you have to go to t code CL24 and delete old strategy.
    check it once you delete it. Create new release stratagyThen change the document type as your requirement.Give the purchsing organization.
    I hope it will work......

  • Incorrect initial value for characteristic 0fiscyear in i_t_range

    Hi,
    While extracting the data from the source DSO to Target I got an error message like '' Incorrect initial value for characteristic 0fiscyear in i_t_range".
    what is the step should i take to resolve this?
    Thanks in Advance.

    Gurus
    I have the same problem with my ABAP code written in DTP filter.
    Can anyone please help what needs to be done , I am getting this error when I try to load the data to cube.

  • Error while opening Workbook:variables for characteristic cannot be process

    Hi all,
    When I try to open the workbook for a particular query, I am getting the following error. Kindly suggest me in rectifying this information message.
    "Variables for characteristic [ZDVCODE]Dealer code cannot be processed"
    Regards,
    Steve

    I am encountering a very similar warning, so this may shed some light on the matter.  I have a Web Application that runs just fine when it is filtered only by Calendar Day.  However, when I filter the Web Application by Calendar Day and Material Group both, then I get a warning at the top of the output that says "Variables for characteristic [0CALDAY]Calendar Day cannot be processed".
    So, at least in my case, the variable isn't deleted, and it actually works just fine buy will spit out this warning under these circumstances.
    -Owen

  • Issue in IP - Entering value for Characteristic object

    Hi Expert,
    I have a requirement where the input has to be unabled for characteristic objects through IP template.
    I did the development as per the blog:
    http://scn.sap.com/blogs/Christopher.sapbw/2012/12/25/master-data-planning-with-sap-integrated-planning-sap-ip
    The issue is the development should have been done by using Super class CL_RSMD_RS_BW_SPEC. But could not use it as super class as i could not modify the methods in this case. Instead i made a copy of this class and did some modifications to the class. The class is not working for me. Its throwing the following error.
    Please let me know if you have come across similar issue, and how to resolve it.
    Thanks,
    Anupama

    Hi Anass,
    I was able to solve the issue partially. Not getting the error now, but i am still not able to save the entered data back to the real time cube. I am using the analysis office for my development and using the standard save button on Analysis office.
    Please help.
    Thanks,
    Anupama

  • Catalog error : Index of values is missing for characteristic PLANTu0092

    Error" Index of values is missing for characteristic " in mapping 
    Hi
    We are in SRM
    I was trying to transfer Master records to catalog using
    BAdi : BBP_CCM_CHAR_MAINT but I’m getting an error’ Index of values is missing for characteristic PLANT’.
    Plant has multiple value.
    I’ve following code in the method ENHANCE_CTY_DEF
    ls_char_definition-char_name = 'PLANT'.
    ls_char_definition-char_datatype = 'CHAR'.
    ls_char_definition-MULTIVAL_INDICATOR = 'X'.
    APPEND ls_char_definition TO et_char_definition.
    Following code in the method VALUATE_PRODUCT
    **"plant data
    v_index = 1.
      ls_char_valuation-char_name = 'PLANT'.
      LOOP at t_plant into WA_plant.
    ls_char_valuation-char_value = WA_PLANT-PLANT_1.
      IF  WA_plant-PLANT_1 is not initial.
       ls_char_valuation-MULTIVAL_INDEX = v_index.
       APPEND ls_char_valuation TO et_char_valuation.
       v_index = v_index + 1.
      ENDIF.
      ENDLOOP.
    Can anyone tell me how to resolve it. I’ll definitely reward points to any useful answer.
    -Joe

    Hi
    Have you raised any OSS message with SAP yet ? If no, raise one immediately.
    Meanwhile, try this ->
    <u>It seems the Following code in the method VALUATE_PRODUCT
    has some problem -></u>
    **"plant data
    v_index = 1.
    ls_char_valuation-char_name = 'PLANT'.
    LOOP at t_plant into WA_plant.
    ls_char_valuation-char_value = WA_PLANT-PLANT_1.
    IF WA_plant-PLANT_1 is not initial.
    ls_char_valuation-MULTIVAL_INDEX = v_index.
    APPEND ls_char_valuation TO et_char_valuation.
    v_index = v_index + 1.
    ENDIF.
    ENDLOOP.
    Try changing the code - like this ->
    **"plant data
    LOOP at t_plant into WA_plant.
    v_index = sy-tabix.
    ls_char_valuation-char_name = 'PLANT'.
    ls_char_valuation-char_value = WA_PLANT-PLANT_1.
    IF WA_plant-PLANT_1 is not initial.
    ls_char_valuation-MULTIVAL_INDEX = v_index.
    APPEND ls_char_valuation TO et_char_valuation.
    ENDIF.
    ENDLOOP.
    Some SAP OSS notes to refer ->
    <b>Note 850613 - Maintaining the BBP_CCM_CHAR_MAINT BAdI using Customizing
    Note 875039 - BBP_CCM_CHAR_MAINT: Valuating predefined characteristics
    Note 724097 - Search of the comp. in case of structured characteristics</b>
    Do let me know.
    Regards
    - Atul

  • Email name restrictions for icloud

    What are the name restrictions for creating a new name for an iCloud email account.  Can one use some of the keyboard symbols like * # & % ! -  $ __ (   ) or are you restricted to using the alphabet and numbers?

    Hello Tuffy Wuffy,
    This can be done by removing the iCloud account, then readding it.
    On your iOS device’s Home screen, go to Settings > iCloud, then at the bottom of the screen, tap Delete Account.
    iCloud: Change iCloud feature settings
    http://support.apple.com/kb/PH2613
    Cheers,
    Allen

  • G/L Description not showing in Query designer for Characteristic values

    Hi Friends,
    We have developed a report and that we have made two New selections on the object 0GL_account....some GL Account number are grouped in that. While selecting the GL Accounts to new selection, it is showing GL Account number and Description. After that, the selected objects are not showing the Description in the query designer. It is showing GL Account number only for the both Technical name and  Description. I Would like to see Description of the GL Accounts in the Query designer. i have plan to delete certain account based on their dercription.
    And at the Infoobject description in the Business Explorer tab Display feild it is set as Text and Key. And till yesteday it shown the Description for the Account numbers. The daa loads are also .gone fine.
    Can you please guide me in this regards
    Thanks & Regards
    Anand

    Hi Thanks for your reply.
    The accounts which we selected are having Description  and it is showing while selection the selected GL Accounts.
    And the master data also is in active...When i try to activate the master data Agoin it is saying statement "Master data for characteristic 0GL_ACCOUNTactive"
    Any more suggetions..........
    Regards,
    Anand

  • Access restriction for PDF generated with Smartform

    Hi there,
    I am generating a PDF from a Smartform using convert_otf.
    What I would like to do is, add restrictions for the generated document just like in Acrobat Professional.
    For example:
    Printing: yes/no
    saving: yes/no
    cut, copy paste: yes/no
    Is there a way to pass this Parameters to the PDF?
    Thanks in advance
    Uli

    Hello,
    check this thread: Mailing PDF Attachment with Password Protected
    Otto

  • User ID restriction for Project/WBS to create service entry sheet

    Dear All,
    My client requirement is that the user id should be restrict for particular project or WBS to create service entry sheet(ML81N). Can we do it in this manner?
    Further i want to give you my organization structure as given below.
    1. Project :-   20
    2. Plant    :-  Single
    3. Bus. Area:- 2
    4. Co area :- Single.
    Thanx,
    Vishal Kr. Sharma

    Standard restriction is possible for this T code based on document type,purchasing group,purchasing org and plant.
    Others being ruled out I think solution is to restirct using purchasing group which is smaller entity.
    Regards
    Sreenivas

  • Restriction for the use of last_record in 10g forms

    Hi,
    When I was working on Forms 6i with the query in the trigger When_new_form_instance:
    go_block('ABC');
    execute_query;
    last_record;
    first record;
    go_block('DEF');
    execute_query;
    last_record;
    first record;
    It worked and gave correct data on frontend.
    When the same was used in 10g forms, it gave incorrect data.When we removed last_record from the query, it worked.
    Could somebody tell me is there some kind of restriction for the use of last_record in 10g forms? If yes, what kind of?
    Thanks,
    Neha

    When I set Query All records to Yes.
    Surprisingly it gives incorrect data.
    This is what is bothering me.
    As i said earlier i was using last_record for
    navigation purpose to fetch all the records from the
    database and then first_record to highlight the first
    record.
    You don't need to do that, that is poor programming logic. Instead change the block property Query All Records and set it to Yes.
    This will fetch all the records from the database and the highlight will be on the first record;
    Regards,
    Tony

  • Restriction for Profit centers

    Hi All,
    I have an issue here. The client wants the following requirement:
    A set of users needs to be given access to post all the GLS available in FBCJ, wherein the users should get restricted at Profit center level.
    Manual posting through FB50, Fb01 and F-02 should not get affected with this. They have been using validations for this till now.
    How do i go ahead with authorisation object in this scenario. If authorisation object and roles can be used in this, please tell me in detail what all objects i need to use for GLs, PCs, Tcodes and User Names.

    Friends,
             What i found out is we cannot have both hierarchical and flat restriction for one role.The following scenario best explains that..
          let us say we have restricted 0PROFIT_CTR for values P001,P002,P003 and at the same time we have restricted on hierarchy.
          Through this we can succesfully restrict queries which have flat list display of Profit center but for the queries which display result in hierarchy it fails because the query that is framing up for hierarchical display is having the following condition in its select statment
               0PROFIT_CTR=;
            for which we are not authorized.
        So we can have only either Hierarchical restriction or flat list restriction for one role.
         Please if anybody find it incorrect I request them to share their knowledge with me.
    Hansjörg Luzi thanks for the help. 
    Thanks & Regards
    Mrutyunjay

Maybe you are looking for

  • Problem with HUD drawing in Photoshop CC with Mavericks

    I use Photoshop CC on my new iMac with Mavericks, and i can't use the HUD possibilities for changing the size of the brush (Ctrl+Option+Click), instead it move my photoshop window... I try to find something with tweeter, Pierre Courtejoie help me, bu

  • Trouble signing my app

    Hi: I'm trying to use Java Web Start with a simple app. I created the .jnlp and when I try to invoque it from firefox, JavaWS launchs and starts downloading the app. The problem comes when it tries to check the signing. I have a .jar from my app and

  • JDBC Driver for Personal Oracle 7.0

    I have Personal Oracle 7.0 setup on my PC. I need to install JDBC driver for it. Where Can I get it? Thanks.

  • Event handling across unrelated classes

    I have a widget type of package that holds some classes that are basically JPanels with appropriate components on them. Specifically, JCheckBox, JComboBox, that kind of thing. These JPanels are used by multiple applications that describe some graphic

  • What does this mean? "You are running an operating system that Illustrator no longer supports."

    Im trying to download photoshop as my first app with creative cloud and i keep getting this message , "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms."