Restriction for Material Component deletion after PO creation in PS

I want to restrict the material component deletion from the Projects once the PO is created for it. I have done the required configuration settings in OPSG (Change Profile Order Change management) where the system must give an error for material component deletion once the PO is created for it. But still it is not working.
1) Why the configuration in OPSG is not working?
2) Is it required to use user exit CNEX0009 or CNEX0039?
3) Where can I locate uset exit CNEX0039 if required?
Can anyone help on this issue!!!!

Hi,
Please check again the settings in OPSG.It is std functionality in SAP so i think it should work.
Muzamil

Similar Messages

  • MASS UPDATE FOR MATERIAL CODE DELETION

    Dear all ,
    Please  provide the option for material code deletion in mass update .
    Srithar K

    Use T-code: MM17
    Table-Fields:
    MARA-LVORM (Client level)
    MARC-LVORM (Plant level)
    If its your first time, do a test run in sandbox.
    Added
    The above will flag the deletion flag. Then you will have to do a archival. To know the steps, just do a search in this forum or MM forum, you will get a step by step procedure.

  • Process order - material component deleted

    Hi,
    I would like to know where can I check if a material component has been deleted in a created process order. Would there be any history for this?

    Dear,
    in easy easy menu...
    Logistics -> Production -> Shop floor control -> Control -> Order change management ®-> Change process......
    Regards,

  • Material component deleted

    Hi,
    I would like to know where to trace if a material component has been deleted in a process order.

    Hi,
    Before releasing the order, if you delete the material components from the BOM, then this data is not stored anywhere, since you have not started up with actual production. At this stage, if you want to retrive the deleted components, you can read the master data once again into the order (Process order - functions - Read master data)
    After releasing, the data from order is grayed out (and not deleted) with a deletion flag, you can very wel find the data in the order itself.
    Regards,
    Mahesh Patil

  • How to restrict the Material (MRP relevant )from manual creation of Pur Req

    Hi,
    If we have a material "ABC"  which has MRP type as "PD" (MRP relevant) in Material Master.
    If we don't want to give user the option of creating manual Purchase requisition for Materail "ABC", Whether this is possible in Std SAP ? If yes, then How?
    Thanks in advance,
    Pravin

    Hi,
    In standard there is no option to restrict at material level.
    But using BADI ME_PROCESS_REQ_CUST method PROCESS_ITEM you
    meet your requirement easily.
    Regards,
    Sunitha.

  • Update required quantity for material component in Process Order.

    Hello.
    I need update component qty from Z dialog program.
    The famous BAPI_PROCORD_CHANGE doesn't deal with COMPONENT structure but only HEADER. Then I tried to combine it with an enhancement.
    I see that in WORKORDER_UPDATE~BEFORE_UPDATE I can't change values in IT_COMPONENT.
    Anybody have used enhancement for this purpose and how can I transfer my calculated values to order?
    In addition I check ENHANCEMENT-SECTION   CO_BT_ORDER_POST_02 SPOTS ES_SAPLCOBT  to do it.
    What syntax our developers should write if it's possible?
    Thanks
    Alex Davidov

    Kumar.
    What should be copied? The header batch or some/all of the characteristics of the header batch to a new batch for the component?
    Anoop

  • Workflow for Material Master and Vendor Master Creation

    Hi
    Has anyone mapped creation of Material Master & Vendor Master through SAP Workflow.
    Seek your valuable inputs.
    Best Regards
    --Vikas

    You may not get the complete standard form which will match this functionality. But you can develop your business logic in custom code for fetching the data and the interface and use the standard templates for layouts if any template matches your requirement. You can see the complete lest of templates in : "transaction SFP->Form->Layout->Tools->Template Manager
    Most of the common templates are available here.

  • Refresh FAST for Materialized View failed after Partition Operation

    Dear all,
    I have created a Materialized View having a simple join between a Dimension and Fact Table of a Datawarehouse. The MV is REFRESH FAST ON DEMAND.
    However, when a Partition Maintenance Operation (PMOP) was performed on the Master Tables, the MV failed to Refresh giving a ORA-32313 error.
    As suggested on one of the troubleshooting websites, we did a complete refresh of the MV and fixed it temporarily. However, I would like to know the exact cause for this and would like to have a permanent fix for the same.
    Can the DBA for this Database provide me the answers or are there some standard troubleshooting steps for the same?
    Please let me know.
    Best,
    Ketan

    Hello Maurice,
    Here are the answers to your questions.
    1) Database is Oracle 9i.
    2) We have a stored procedure to refresh the MV. The command is dbms_mview.refresh('SALES_FACT_MV','f'). It was working fine daily. Only after a PMOP was done on the Master Tables, it failed to refresh. We have also created indexes on some columns of the MV for performance improvement. We are getting a very good improvement.
    3) We have MV logs for both Master Tables to store the incremental values.
    4) We are not able to get the output from DBMS_MVIEW.EXPLAIN_MVIEW since this can be done only by the DBA. WIll update you once I have the info.
    5) Same as Point 2.
    Let me know if you need any further info.
    Thanks, Ketan

  • Restrict for TextArea Component

    hi,
    im creating a calculator functionality in As3.0 here i'm
    passing the number and also operator as a string to
    TextArea by pressing the particular button like 1,2,3..+.../.
    but i need to restrict the operator
    here i'm using the restrict function for the Text Area
    Component . if typed the number and operator in the TextArea
    componenet instead of pressing the button it's working fine
    Thanks
    Sen

    The restrict property (at least in as2, I assume its the same
    in as3) only works as a typing restriction when the input textfield
    (which is what a TextArea uses) has keyboard focus.
    If you're assigning values by actionscript to your TextArea,
    then the restrict property won't prevent you assigning values that
    are 'restricted'. You need to do that with your actionscript so
    that you only assign values that are 'permitted'.

  • Authorization restriction for material group field in MM02 for user role

    Dear All,
                 My client wants to restrict 'material group' field usage in MM02 for certain users.
                 How to achieve this task?
                 Kindly advice
    Thanks &Regards
    Thangavel Ganesh

    Hi all ,
    You can use authorization object advised by AKPT MM. For related transactions , you can benefit from MM Related Authorization Objects - How to Find out & Assign , thanks to Sudeep A
    Regards.
    M.Ozgur Unal

  • How to prevent PR deletion after PO creation

    How can we prevent PR  from Deletion if PO created.

    Hi Mohamad,
    Set the System Message No. 152 to error message in SPRO--> MM --> Purchasing --> Environment Data --> Define Attributes of System Messages -->  System Message
    Version 00 Appication 06 Message 152 Error Message.
    Hope it helps.
    Regards,
    Bijoy Kumar

  • Assignment of Material Component

    Hi,
    To which activity should we attached material component ( Stock and Nonstock)?
    Please explain both for Internal Activty as well as external activity.
    Muzamil

    Hi,
    To answer your question To which activity should we attached material component ":
    Lets take an example:
    Component "A" is being procured and dispatched to the customer. But before dispatching assume that there is a Factory acceptance test (FAT) for this material, so in your project there would be three activities with FS relation ship:
    Procurement> FAT> Dispatch or the Shipment
    Now you know very well that this material is needed for sure at the end of the procurement activity or at the start of the FAT activity.
    1. Either assign this material to Procurement activity with Allign finish date on the general data tab of the Material "A"
    or assign it to FAT activity with Allign start date on the general data tab of the Material "A"
    2. So when you schedule the proecet the requirement date on the general data tab of the Material "A" is picked up from that particular activity.
    Now to explain your question :When to chose the Stock and non stock:
    1. If you wish to dispatch the material directly from the vendor to customer, assigne this material component--delete the procurement indicator and enter "N" as item categoty (Based on the configuration in OPS8) you wll have two options so choose third party order.
    2. If you wish to dispatch the material after it is received in your own plant then chose "L" as item category and save it..
    Hope it is clear now.
    Reward point if found useful..Revert back if any more doubts.
    Thanks.

  • TPS file is not deleted after FrameMaker creates PDFs via Acrobat 8

    Using FrameMaker 7.2 build 158, and Adobe Acrobat 8, when creating PDF files, the temporary PostScript file (*.tps), which is created before the final PDF, is not deleted after the creation of the PDF is complete.
    This is a big deal for us because we are using a tool which hooks into the PDF-creation of FrameMaker/Distiller, and is reliant on this TPS file being deleted.
    Is this a known bug? Does Adobe know about this? Do any other users have workarounds for this?

    Thomas,
    FWIW, speaking from experience with the Save As route, I've seen
    random "phunnies" in the final PDFs (such as the missing fonts
    issues), a bigger .tps file than the .ps file generated from directly
    printing to file, slower throughput in both the intermediate
    postscript file creation and actual distilling (probably tied in to
    the larger .tps file) and other differences from what the joboptions
    should have been.
    There should not have been any differences in the file sizes being
    created if the same printer instance/configuration was actually being
    used. I also see this on some automated runs with Miramo. It's not
    consistent either - sometimes it works fine and then the next run, the
    process is considerably slower and there are dropouts in the PDFs.
    So far, manually printing to a ps file and distilling always seems to
    work without any issues.
    Your mileage may vary.
    Arnis

  • Network Component  Deletion

    Hi All,
            I want the table from which i get the material component deleted from activity (Released) ie it shows a deletion flag in  RESB table but i also want the time and date on which it is deleted.
    Thanks,

    In CJ20N , click on the component assigned to the network activity , and clik on the blue button "i" either on general Data tab or Proc Param Tab .
    In the next screen ,from the Menu
    Extras --> Change Documents --> for All
    you get the time stamp .
    For the component take the reservation number and pass it to RESB Table .
    If RESB-LOEKZ = X ,
    Pass RESB-OBJNR to JEST-OBJNR for the Status I0013 .
    probably there should be a standard function module or anyother means to identify when the DLT status is active in JEST . Need to explore .
    regards
    Kish

  • User Exit for Material Plan Costs

    I have an escenario where the client needs another option to calculate the material plan costs, but need to identify the correct user exit.
    In transaction OKYF exist the option "U Valuation Price with User Exit" but need the user exit to use.
    Hope to receive information soon...
    Best Regards...

    Hi
    you can use unit costing for material option for this...
    Automatic netowrk costing for material component
    you need to maintain proper costing variant for material component in config.
    in projects assign material then select material -edit - cost - unit costing.
    which will get reflected in network cost in CJ40.
    Venkatesh

Maybe you are looking for