Restriction of Campaign's in Lead Transaction Screen in IC Role.

Hello,
I am working on a CRM Web Ui project where we create campaigns in the marketing role, when creating the campaign we do have the tab products where the user will enter the product id, the category id which is assigned to it will get defaulted, my requirement is that when the user enter's this category id in the lead transaction in the interaction centre role, only campaigns pertaining to that  particular product or category should be visible in the dropdown when creating the lead.
I also understand that this is a technical requirement and can be done through a user exit, appreciate if anyone knows about this user exit and what code needs to be written in the same, since I do not have any Web Ui technical folks to help.
Appreciate your help on the same.
Kind Regards
Atul

Hi,
The easiest is to not show the version number characteristic.
Create the layout as follows:
'CustGp', 'Biz_Unit', 'sales_Area', 'Prdct_Div', 'Billing2006', 'Target_2007 A10', 'Target_2007 B10', 'Target_2007 A10'.
S1, B1, SA1, Div1, 4500, 5000, 6000, ____ .
From a user point of view, this layout is more intuitive.
After all, why should the billing be shown 3 times.
You could even show the difference between target A10 and target B10 to make it easier for the user to fill column Z10.
You can achieve this by putting the version in the 'data columns' on the first screen of your layout and then create several lines in the 'data columns' tab and enter the correct version (A10, B10, Z10) in the different lines.
You will also need a line for billing and will be obliged to assign a version. Billing generally has no version so enter '#' not assigned.
Please assign points if this helped you,
Best Regards,
Filip

Similar Messages

  • Restricting Follow Up Activities on Lead Transaction

    Hello All,
    I need to restrict certain follow up activities on the lead transaction, I have gone through the forum and found out that the same can be restricted using authorizations
    Following are the posts
    Limit the transaction types by role
    Restrict the transactions type in pop-up when creating a Transaction
    Following are the auth code checks I have performed
    The objects CRM_ORD_LP and CRM_ORD_OP have been set to inactive screen shot attached below
    The transaction type Z002 which needs to be excluded is not maintained in the object CRM_ORD_PR
    For the concerned user only one role is assigned, however when I am creating the follow up activity from the lead transaction, the system is allowing me to create the same, please advice if I am missing some configurations
    I am able to create the activity as per the screen shot below
    Kind Regards
    Atul

    Hi Shobhit,
    Thank you for your prompt reply, I have the following queries appreciate if you could let me know
    For the Object CRM_ORD_LP
    What entry I need to maintain for the activity
    For the object CRM_ORD_OP what entry do I need to maintain for the below three parameters
    a) Activity
    b) Partner Function
    c) Partner Function Category
    Kind Regards
    Atul

  • Creating lead transaction at background after creating BP

    HI experts,
    <b>Scenario:</b>Once we create the BP the system automatically has to generate Lead transaction and activity transaction at the background.
    Can anybody please explain me how can we achieve this scenario?
    Thanks in advance.
    Regards,
    -Rahul.

    Hi Srinivas,
    Thanks for the response and also I've awarded the points to you.
    <b>our scenario</b> is whenever xyz person(first visit) enter into the store the sales employee in the store will give the product demonstration to xyz.
    after product demonstration is done the sales employee will ask xyz which the address and contact numbers etc and also the sales employee asks xyz which product he is looking for? whether he likes the product? if he likes when do he wats to buy etc.
    Then the sales employee will maintain BP master in SAP
    as per our scenario the movement when the sales employee save the BP master the system has to generate Lead transaction and activity transaction at the background.
    <b>Issue:</b>
    1) how do we capture the questionnaire details to generate lead?
    2) where do we capture the questionnaire details?
    I guess there is some BAdi available, but what I dont understand is in order to generate a lead transaction certain data is required like questionnaire, lead group and lead soucre etc.So where do I maintain questionnaire and other data to be passed on as input parameters to generate lead?
    is it necessary to attach questionnaire and other details to BP master record?
    or is there any way where we can display lead transaction screen during creating of BP?
    Please your inputs would be greatly helpful.
    Regards,
    -Rahul.

  • Is there any restriction on Review transaction screen to correct expenditur

    Hello Experts,
    How to correct the error by review transaction screen; "Task Level Transanction control has been violated" while importing transaction using transaction import process. I can able to find out the set of data by using Transaction source and transaction batch in transaction review screen but when I removed the error and saved the record it is not importing the transaction after pressing the import button. Basically it is not setting the record status to "P" in pa_transaction_interface_all.
    So can anyone tell me how to correct such kind of records in transaction review screen?
    Any pointer will be appreciated.
    Thanks
    :-)

    Hi Dina,
    First of all thanks for your response.
    There is task level transaction control voilation occures which I have corrected it also. But the issue is How can I re-import the same transaction through review trasaction screen?
    a) either I need to login from SQL and update the status flag to "P" from "R" b) change the bach name in transaction review screen so that automatically status is changed to "P"
    and I can re-import the transaction by runing PRC transaction import. But the pain is when I dont want to perform the action a) and B) then do you have any other method by which I can re-import the transaction from review transaction screen? that is main issue I want to highlight.
    Thanks :-)

  • Campaign Reference in Lead

    Hi,
    How to determine the campaign in the following process:
    1. Create Campaign --> Assign Target Group --> Release Campaign --> TGrp to Channel (Phone) --> Call List is generated.
    2. Call List activated and assigned to IC Agents --> IC Agents contacts prospect and creates Lead.
    Now how the campaign Id will be referenced in the Lead that is created for the prospect in the call list (generated from campaign).
    Can we automatically determined the Campaign Id in the lead or or do we need to manually search and assign the campaign id.
    Note: I have assigned the object reference profile to the lead transaction we are using.
    Please help.
    Regards,
    Shridhar

    Sridhar,
    integrate this lead into campiagn
    specify communication media (communication strategies consisting of one or more different media) by which you intend to contact business partners within a marketing campaign. You enter the communication medium in the Marketing Planner. The attributes of each communication medium can be transferred to the Business Information Warehouse for evaluation.
    Each communication medium consists of one or more communication methods together with a priority that you assign to a communication method.
    If you want to trigger business transactions (activities for example) on the same screen, assign a business transaction type (defined in customizing) to the relevant communication method.
    Procedure
    1.     Access the activity using the following navigation options:
    Transaction code     SPRO
    SAP CRM IMG menu     Customer Relationship Management  Marketing  Marketing Planning and Campaign Management  Campaign Execution  Define Communication Medium
    2.     Choose New Entries in order to create a new communication medium with the following data:
    Field name     User action and values
    Medium     Y003
    Communication Medium     EN: Lead Generation
    DE: Leadgenerierung
    3.     Choose view Communication Methods and Transaction Types and enter the following data:
    Field name     User action and values
    Priority     1
    Communication Method     Generate Lead
    Transaction Type     YLD
    Result
    You have created a new communication channel for lead generation that generates marketing leads in parallel to lead generation itself.

  • To get code combination in transaction screen -AR

    hi all
    i am using r12
    in AR super user -transactions-in the transactions screen -when it is queried say 10000086 in the field Number
    when distributions tab is clicked we get to see a field named GL account eg 701-100001-1000-0101-1220001-000000-0000-0000
    when i see record history for Transactions screen it says RA_CUSTOMER_TRX_PARTIAL_V
    when i see record  history for gl account   RA_CUST_TRX_LINE_GL_DIST_V  but i don't see the code combinations
    how to join RA_CUSTOMER_TRX_PARTIAL_V and RA_CUST_TRX_LINE_GL_DIST_V
    i did join with customer_trx_id but it gives more number of rows
    kindly guide
    thanking in advance

    Do you want sql script to find GL Code Combinations for a AR transaction?
    If yes, following is the query.
    select rcta.trx_number, gcck.concatenated_segments
    from ra_customer_trx_all rcta, ra_customer_trx_lines_all rctla, RA_CUST_TRX_LINE_GL_DIST rctlgd, gl_code_combinations_kfv gcck
    where rcta.trx_number = '<Give your AR Invoice>'
    and rcta.customer_trx_id = rctla.customer_trx_id
    and rctla.customer_trx_line_id = rctlgd.customer_trx_line_id
    and rctlgd.code_combination_id = gcck.code_combination_id;
    If you are looking for something else, please be clear
    Regards,
    Srini

  • Is it possible to add PERNR field to MIGO or MB1A transaction screens?

    Hi,
    Ours is a service industry with @ 10000 employees and we have implemented SAP with MM & HR module. We issue uniforms to all the employees when they join (new Joinee) and again once in January every year as reissuance. We intend to keep size information in employee masters in HR along with station code, designation, department and cost centers.
    At present we are using two fields goods recipient and unloading point to mention employee code and type of issue (new joinee or reissuance). This is because employee code (PERNR) field is not there in MIGO_GI screen or MB1A screen.
    Is it possible to add PERNR field to any of these transaction screens?
    If added then we can fetch the relevant information about issuance of information along with station code, designation, department in Z report.
    If possible, then how it can be done?
    Thanks in advance,
    Satish

    Hi ,
    as i understand we can add new fields in a transaction through user exit /field exit. so please discuss with your ABAP consultant & try to find out all the exit available for MIGO/ MB1A. then you have to decide which one will suit you. here you have to consider some factors like whether you need to enter values in the field or the field needs to fatch any value from any other table & should populate here.
    the ABAPer can then write the code & add your required logic here.
    i am not very good in this subject. just tried to share what ever i knew.
    regards,
    anubhab

  • How to open a R3 Transaction screen in VC

    Hi There,
    Can anyone tell me how to model VC in such a way that I can open up a R3 transaction screen for the VC.
    I have done this in the course but a an reproduce the example with a other TXcode.
    i put this code in my inputfield url: "pcd!3aportal_content!2fcom.sap.pct!2ftemplates!2fiviews!2fcom.sap.portal.sap_transaction_iview?System=SAP_R3&TCode=PA30&GuiType=WebGui&DynamicParameter=RP50G-PERNR%3D&OkCode=ENT2"
    etc, etc, ...what I want to have is a general coding and some info on where to fill in my TXcode in this line.
    I created a signal out from a tabel ...to get a signal out one level up...i connected the iview with the HTML and compliled...but it gves me (over and over again ) a message that eventis declared but can not be raised..  anybody any ideas
    steven

    I found some extra info on the WIKI page
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/
    Here it is said that 'SAP_R3" must be replace by your system name
    I will try this .....
    Create an iView from a default template of the type SAP GUI for HTML (your system connection to your backend must be configured before). You have to choose the system and the transaction code. Then integrate this iView via a html view and the URL.
    An alternativ is a html view with an URL:
    "http://<portal>:<port>/irj/servlet/prt/portal/prtroot/com.sap.portal.appintegrator.sap.Transaction?System=SAP_R3&TCode=VA02&GuiType=WebGui&DynamicParameter=VBAK-VBELN="&@Order_Number&"&OkCode=ENT2"
    This example is calling transaction VA02 from an ERP backend system. The systemalias is SAP_R3 (you need to replace it with your systemalias),
    skipping first screen and bringing the sales order "Order_number" in change mode.
    The parameter Order_number is filled previously in the Visual Composer model.
    <a href="http://https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/">http://https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/</a>

  • Upload documents from transactional screen - Sale & Purchase Order

    hi All,
    I am trying to have DMS attachment from trx - VA02 directly. I have come across few links which say - this is possible.
    upload documents from user transactional screen to content storage area | LinkedIn
    I am able to get the functionality for CJ20N - 'WBS Element' Object (Screenshot attached). Can someone pl suggest if I am missing something to get the same functionality for Sale Order / PR & PO.
    For Sale Order - I believe the 'Create' icon shall be 'Enabled' once I navigate - Extras -> Documents.
    -thanks

    Hi
    This button is only displayed if you use the new screen logic (see note 1066915) and when you have maintained the necessary customizing for the required document types and objects in transaction DC10.
    So I would kindly ask you to go to transaction DC10 and mark a document type where the necessary object is linked under 'Define object links'. Choose the right object and display its details by double-click. Then you will see the field 'Create document' where you have to enter a value '1' (using transaction) or '2' (simple creation). Please enter a value and flag the 'Additional function' checkbox too.
    /Tilak

  • Link a report with transaction screen

    I am working on Creating Transaction screen. How do I link a report say "Word Document" to my transaction : I need to <b>export</b> the data required in my transaction from the<b> Database Table to the Word Document</b> and link that to the transaction screen so that I can create a Push Button on transaction screen to take the printouts of the required Financial Data

    Hi
    Try to see trx ole: here you should find same examples to manage a word file.
    Max

  • Adding fields/text on standard SAP transaction screens

    Hi,
    How do we add the fields on standard SAP transaction screens?
    For example, if I have to add field on transaction FB01 screen or change text of existing fields, how does it works?
    Please let me know.
    Thanks ,
    Yogita

    hi
    every standard sap transaction have enhancement options you can add fields there
    try this program to find the field-exits of the standard transaction.
    [https://wiki.sdn.sap.com/wiki/display/Snippets/howtogettheuser-exitsofa+transaction]
    regards
    sarves

  • Attaching the documents to customer transaction screen

    Hello Experts,
    Greeting of the day!!
    One of my client wants to attached a scan document of received transaction in a Customer transaction screen, Now i m confuse whether this is possible in oracle Applications R12.1.3 or not?
    If yes then please guide me or give any reference??
    Oracle Application : R12.1.3
    Database : Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    Thanks,
    Atul

    Hi Helios,
    I found the solution on oracle application screen itself.
    Oracle Apps already provided the attachement future in the application itself.
    VIEW ----> ATTACHEMENTS.. here we can attach a any type of document for customer transaction or supplier invoice.
    Thanks,
    Atul Ramteke

  • Adding custom fields to FPE1/2/3 transaction screen

    Hi guys,
    I need to add custom fields from table DFKKOP to transactions FPE1/2/3 under ADDITIONAL DATA area while manually entering NEW BUSINESS PARTNER ITEM.
    The transaction is not BDT enabled and does not have a screen exit. The user exit and BaDI dont seem helpful to me.
    The screenshot below shows the user exits and BaDI for the transaction.
    Link: Exits
    What are my options to add fields to the transaction screen now?
    Please help out!

    Hi,
    Yea i got the functional guys to configure it. Was a unique issue!.....But I know how they did it.
    You can add it through SPRO transaction. Go to the below mentioned path.
    Go to SAP Reference IMG
    Financial Accounting > Contract Accounts Receivable and Payable > Basic Functions > Posting and Documents > Document >
    Screen Preparartions > Include Own Fields in Detail Screens.
    Here you need to enter the details from FPE1 transaction screen.
    Activity Documentation:
    Include Own Fields in Detail Screens
    In this activity you can, if you have added customer fields to the document structures, include these customer fields in the entry screens of the transaction for posting documents.
    For the detail screens (business partner item and G/L account item) you can create a screen that contains your own fields. You must create this screen as a subscreen using the Screen Painter. In addition you have to create modules for the intialization and for data transfer (PBO and PAI).
    Activities
    If you have extended the document strutures to includes customer fields, and you need these fields in the entry screens for posting documents, you must create the screen using the Screen Painter.
    Carry out this step to create the screen and the modules that go with it in the system. You do not have to activate these afterwards.
    Further notes
    Read the field help for each field in the table. This describes the exact procedure.

  • Number range in Lead Transaction

    Hi ,
    In my Sandbox we have created one lead transaction and assigned one number range to that transaction.Now suddenly we figured out that one number of that range is assigned to more than one transactions of the same T type. eg 116 number is assigned to two different lead transactions created at two different times from the same transaction type. Is it usual scenario pls let me know how to debug the problem.
    Thanks,
    Ambrish

    Hi
    Run the archiving program which is by SARA transaction.
    Put the archicing object CRM_LEAD.Its shall pick up all the transactions which are to be archived and put them in a flat file.
    For further information refer to the link:
    http://help.sap.com/saphelp_crm50/helpdata/en/e6/c66f3b6c980c3be10000000a11402f/frameset.htm
    Regards
    Rekha Dadwal

  • Include SAP standard transaction screen in ABAP webdynpro view?

    Hi all,
    Any body have idea on how to create SAP transaction screen in WebDynpro view?
    ex : i have requirement like i need IB52 transaction in webdynpro view, so that it will be called this view from EP iview to do some process.
    Regards,
    Rajesh Yadla

    Hi,
    you can use a IFRAME and run a Portal transaction Iview for IB52 inside the WD-IFRAME.
    For that you first have to create an iview for the Transaktion IB52 inside your Portal.Then call the preview of the Iview. This Preview-URL(or the PCD) you can call as source inside the WD-IFRAME. For me this works fine.
    Regards
    Frank

Maybe you are looking for

  • Novated Purchase orders cannot be changed error

    Hi Experts,     while trying to edit the PO we are getting an error as " Novated Purchase orders cannot be changed" . I am confused that which field is used to differentiate the normal PO to that of novated PO at portal level.  Please let us know why

  • SPOP3 in MAIL ADAPTER

    Hi all! Is it possible to use a SPOP3 connection in mail_sender_adapter in order to get mails? Thank you all! Ignasi

  • HT203433 How to cancel an app download

    Not sure if I want to cancel the app or what I need to do. I already had the app downloaded and it was working fine until I tried to upgrade which definitely was not a good idea. I am away from my laptop and cannot connect my iPad to it. I'm camping

  • Error creating policy with context

    When I try to create a policy: BEGIN ctx_ddl.create_policy('sdoscan.ec_prd_prditmname','sdoscan.ec_prd_summ.prditmname','','','','','','','','','','CTXSYS.DEFAULT_STOPLIST',''); COMMIT; END; I get this error: ORA-20000: ConText error: DRG-10503: Unkn

  • Ejecting installati​on disk

    When I try to eject disk "OJ4500G510g-m A window comes up saying it could not be ejected because "HP installer" is using it even though I installed it and my Printer is working.  My question:  why is this happening?