Restructure Purchase Order Form?

Hi all
I am in learning phase of SAP BYD.
I have task to restructure the Purchase order Form.
Contact should be
Purchase request and orders (WC) > Purchase order / Général tab
Buyer responsible field
Below Contact I want to put new label Service
Service->
Purchase request and orders (WC) > Purchase order / General tab
  Double click on Buyer responsible field to display employee Overview and use Reporting Line unit as service.
Can any help me to achieve this?
THanks & Regards
PRAT

Prat,
Follow the steps below to add new field.
1. Go to Purchase Order WC
2. Click on create new purchase order
3. Click on Adapt on the top right corner of your screen-->enter adaptation mode-->yes to the pop up and ok. Click on adapt and edit screen.
4. Highlight General information under Sections and click on extension field-->add--> Type in service in Field label, Tooltip and technical name and save. Leave the rest empty.
5. Tick the displayed box service under fields and publish. If you want the service to be displayed in reports go to further usage--> add the service to the data sources and reports tabs.
6. Publish and overwrite any personalization settings for that screen that user might have saved.
7.Go to adapt and leave adaption mode.
Hope this will help you.
Regards,
Emeka

Similar Messages

  • Open Purchase Order Form in Find Mode

    Hi,
    I have to open the Purchase Order Form in Find Mode.How to open in Find mode?.
    I Used the Following Code in Form_Load  && Action_Success=true
    if(oForm.Mode = SAPbouiCOM.BoFormMode.fm_ADD_MODE)
            oForm.Mode = SAPbouiCOM.BoFormMode.fm_FIND_MODE
    But it is not working.Please help me to solve this.
    Regards,
    M.Dhivya

    call
    ActivateMenuItem( "1281")
    in application object.

  • Driver program for Purchase Order form "/SMB40/MMPO_A"

    Hi All
    Could you please suggest me Driver program for Purchase Order form "/SMB40/MMPO_A" ?
    Driver program "/SMB40/FM06P" does not have the same interface structure as this form, hence can not be used.
    << Text removed>>.
    Regards
    Ansh
    Edited by: Matt on Mar 27, 2009 7:22 AM - Please do not offer points

    Hi Ansh
    see this link
    [Driver program |https://forums.sdn.sap.com/click.jspa?searchID=24089230&messageID=6810108]
    Regards
    HAreesh Menon

  • Purchase Order form in Query only mode for some users

    Hi All,
    I want to make the Purchase Orders form as query only for a single user. I tried by giving 'Query_only=Yes' in the parameters section. I am getting 'FRM-04151: You cannot query records here' message more than 10 time. I know we get this message and this is applicable to all the users. But this message is comming more than 10 times.
    Is there anyway that I can restrict the Query only mode to a single user and please suggest about the message also.
    Thanks in Advance,
    Naresh

    Naresh,
    Since you want to achieve this for one user only, I would suggest you create a new function/menu/responsibility and assign this responsibility to the user.
    Note: 400380.1 - How To Create a QUERY-ONLY FORM
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=400380.1
    For the FRM error, please review the following document.
    Note: 116074.1 - ACCESS LEVEL - REVIEW ONLY - PO
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=116074.1
    Regards,
    Hussein

  • Purchase Orders form in Query Only mode for a single user

    Hi All,
    I want to make the Purchase Orders form as query only for a single user. I tried by giving 'Query_only=Yes' in the parameters section. I am getting 'FRM-04151: You cannot query records here' message more than 10 time. I know we get this message and this is applicable to all the users. But this message is comming more than 10 times.
    Is there anyway that I can restrict the Query only mode to a single user and please suggest about the message also.
    Thanks in Advance,
    Naresh

    Please post this question here: OA Framework
    There are so many special conditions and restrictions for E-Biz Suite that this forum is not the right place to ask these questions. The Apps forum at this location is the right place.

  • Creating a purchase order form that has a flowable layout" Help Tutorial

    Regarding the "Creating a purchase order form that has a flowable layout" Help Tutorial,  I can't seem to get the data to pull in for just the PO in question, is there a secret?
    Ideally, it should create one form for each PO with the detail lines for each PO on the individual forms.  Can we do this?
    Many thanks!

    Hi
    If the smartform purchase order is not available in your system
    means you can download the form IDES and you can upload the form in ur ecc 6.0 system.we faced a similar kind of problem in our system and we did as i said.
    Once you uploaded the things you can easily view the form interface and rest of the things related to smartforms.
    Thanks and Regards
    Arun Joseph

  • MM - Purchase Order Form Setup

    Hi Experts,
    I am from FICO area but unfortunately my client wants me to support on MM module (only in small areas) and I need support on below:
    Currently we are printing Purchase Order form for vendors but now there was change in purchase order form so I copied old form and created new form (used SE71 for form development).
    My current issue is I do not know where to setup to form in MM so that printing is done with new form.
    Looking for your assistance
    thanks & regards,
    prashant rane

    hi..
    Go to
    SPRO- > MM -> Puchasing- > Purchase Order ->Forms for Messages ->Assign Form and Output Program for Purchase Order
    open this and assign the programs name and form name for any particular output type which you want to use for your PO output.
    After that go to me21n. then Goto menu and messages..
    here in the output column assing your output type and ente the communication method button...assign output device there..
    It will work..
    And if you using ouw defind output type then you have to do lot of congig like defien message type and message determination schema....
    Thanks..

  • Purchase order form printing is required in preprinted stationary format

    Dear All,
    I need one VERY URGENT HELP from you.
    Client wants to do printing Purchase order form in preprinted stationary format i.e. using this format they want to print PO document only for certain variable fields each time in our Laser printer,but some fields (which are already) lying will not be printed. (But in the PDF Download of the form for each document number all the fields must appear).
    Could you please guide me what are the sequential steps need to be followed, where & how in order to incorporate "preprinted stationary format" scenario in my
    Purchase order form. Also, if possible, please tell me in brief what is the meaning of preprinted stationary format & why we are using it / purpose of it.
    Awaiting your favorable reply at the earliest.
    FYI. Anyways, I have convinced Client that we will provide PDF attachment of form only to them, not Excel attachment. Thanks very much for encouraging me.
    Thanks & Regards
    Sudipta

    Hi,
    Thank you for your valuable input.
    Please tell me what should be my approach i.e. sequential steps need to be followed & where ( with the related configuration / settings changes, necessary coding changes & where, if possible, please send me one realtime scenario and its related documentation related to my concerned issues at the earliest as it will be very beneficial for mine. I have come across this scenario for the 1st time. Kindly guide me with your documents) in order the incorporate the below requirement:
    After modication of standard Purchase order form using SAPSCRIPT I / Client want to download it into PDF attachment individually corresponding to each PO number. In this PDF attachment all the fields will appear.
    But when I / Client will take Printout of this modified PO form (say for example ZMEDRUCK) only certain important information / certain field values will be getting printed, not all.
    User will be able to give ranges of PO document numbers for printing at a time based on their requirement, here all documents as specified by the user will be getting printed at a time, but one document printout followed by another document printout , and so on.
    We want to print PO sapscript form in "Print output" only. Also, please guide me how many & which output types, message type etc we need to configure & how for the above requirement ( i.e. download of the ZMEDRUCK form into PDF with its all the fields values + printing this ZMEDRUCK form for printing certain important information using "preprinted stationary format".)
    FYI. We are using Laser Printer for printing SAPSCRIPT forms.
    Awaiting your valuable fruitful feedback with necessary documents at the earliest.
    Thanks a lot.
    Have a very nice time ahead.
    Thanks & Regards
    Sudipta

  • SRM Purchase order form?

    Hi
    SRM Purchase order form
    As we are implimenting SRM 7.0  for of the project,We have one of the scenario called :SRM Purchase order form
    So we need to find the actual content of the Po from.?
    Can any one can give the Actual content of the PO form ?

    Hi Rameshwar,
    PO form is something you need to discuss with Business, they will be able to provide you the data which you need to input in the form.
    Generally below things are mentioned in PO form.
    - PO Number
    - Vendor Name & Address
    - Delivery Address
    - Invoice address
    - Terms of Payment/Delivery
    - Contact Person Name & Telephone or email
    - Company Logo
    - Item, Item descirption (material no if you have), quantity, Unit of measurement, net price, tax, total price, currency.
    - General remark like disclaimer....etc...
    Best Regards,
    Anil

  • Purchase Order Form design

    Hi Friends,
    Please help to me to get the information of below requirement,
    List of all the fields we'll need to include in the Purchase Order Form (start with the standard fields). List to contain the Label Name of the Field on the Form with its appropriate technical name (eg.  PO Number = MEPO_TOPLINE-EBELN). where can i find all the field and technical name of Purchase Order?.
    I would assume that we can get most of this information from the standard Smart Form program. Could you please tell me the Smart Form Program name?
    Thanks
    Abdul

    Hi,
    You can refer to the standard form MEDRUCK via t-code SE71 in SAP system, normally in the standard SAP system use the standard form to print out document, not smart form!
    Of course, you can define your own smart form and printout program for the local request, the table EKKO, EKPO can provide enough information for the smart form.
    Good luck
    Tao

  • Purchase order form: external send (mail)

    Hi experts
    when creating a purchase order, if the medium used is external  send, the system generates a mail with the purchase order form. What I would like to know if it is possible to customize the system in order to specify the subject of the mail and the body of the mail (like a brief introduction).
    Best regards

    Yes, it is possible by doinng small config change.

  • Purchase Order Form Personalization

    Dears,
    I want to Personalize the Purchase Order form ,
    i want to disable all the field in the header and lines and including the buttons like
    - Currency ,Shipments.
    I want to Personalize this form for a certain responsiblity.
    Thanks in Advance!
    Rehan

    Rehan,
    Refer to the following documents, it should be helpful.
    Note: 279034.1 - Information About the Oracle Applications Form Personalization Feature in 11i
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=279034.1
    Note: 468657.1 - How To Do Forms Personalization
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468657.1
    Regards,
    Hussein

  • Purchase Order form printing error.

    Hi all experts,
    I am not sure which category I should put this question to. Please guide me if I have raised the question in the wrong category, so that I can raise it at the right category. Sorry!
    I am having some problems in printing Purchase Order form using Simple Mail, let's say I am using output type MAHN. Whenever the PO is generated in Simple Mail, a print preview screen with Output Device is pop up, and require me to key in the details like printer name in order to proceed to next step (which is not necessary for my case).
    Whereas, in normal print preview, there is no such pop up display.
    I am suspecting of it is caused of the setting. But I do not know how to solve it.
    Anyone experienced this before? Please help.
    Thanks in advance.

    Hi Sachin D C,
    I am sorry for the confusing query. Actually what I wanted to say is: -
    1) printing the PO - maintain condition records for output type NEU (working fine)
    2) printing Dunning Deliv Remind - output type MAHN (working fine in manual print out)
    3) printing Dunning Deliv Remind - output type MAHN (not working in simple mail)
    Whenever the Dunning Deliv Remind is generated in Simple Mail, a print preview screen with Output Device is pop up and following by another pop up screen Output Processing analysis.
    Do you have better understanding now?
    Please help.

  • Purchase Order form printout error.

    Hi all experts,
    I am not sure which category I should put this question to. Please guide me if I have raised the question in the wrong category, so that I can raise it at the right category. Sorry!
    I am having some problems in printing Purchase Order form using Simple Mail, let's say I am using output type MAHN. Whenever the PO is generated in Simple Mail, a print preview screen with Output Device is pop up, and require me to key in the details like printer name in order to proceed to next step (which is not necessary for my case).
    Whereas, in normal print preview, there is no such pop up display.
    I am suspecting of it is caused of the setting. But I do not know how to solve it.
    Anyone experienced this before? Please help.
    Thanks in advance.

    Hi Sachin D C,
    I am sorry for the confusing query. Actually what I wanted to say is: -
    1) printing the PO - maintain condition records for output type NEU (working fine)
    2) printing Dunning Deliv Remind - output type MAHN (working fine in manual print out)
    3) printing Dunning Deliv Remind - output type MAHN (not working in simple mail)
    Whenever the Dunning Deliv Remind is generated in Simple Mail, a print preview screen with Output Device is pop up and following by another pop up screen Output Processing analysis.
    Do you have better understanding now?
    Please help.

  • Purchase Order Form Personalization Help

    I am new to form personalizations and I am trying to create a personalization that will automatically display the "last price paid" in the Price field in a Purchase Order form for an Item once the Item No. is entered. Also once the data is pulled up, they need to be able to edit the 'Price' field to enter the current price.
    I am not sure how to setup my form personalization using the SQL view to I have that contains the "last price paid" data. I would really appreciate some help on how to do this in personalizations.
    Thanks
    KG

    Forms Personalization is a feature of the Oracle Enterprise Business Suite (EBS) not a feature of Oracle Forms. Please post your question in the General EBS Discussion forum. If you have a general Forms question, by all means, ask it here! ;-)
    Craig...

Maybe you are looking for