Restructuring Small Bus Network on RV016

Hello. I have been with a fast paced growing business the past 9 years. When we started we maybe had 10 devices or so on the computer network, we now probably have a couple hundred or so. We are planning on expanding even more and I am looking into reconfiguring/reprogramming the entire computer network and hardware. One thing I want to do is more securely house the financial cpus and any other devices that are required to be more secure on the network. I am/was planning on doing this through subnet masking. I have a fairly technical background, not certified in anything but have managed and setup the network here the past nine or so years and learned along the way. Basically right now we have an RV016 and the default lan of 192.168.1.x and SNM of 255.255.255.0. I am testing on my machine which has two nics and I put nic 2 to a snm of 255.240.0.0 and an ip of 172.16.0.2. I manually entered my mac address for the nic and that ip as well into the dhcp and enabled it. My nic shows me connected with the ip, but I cannot get out to the net, or anything at all, is this correct behavior? The financial computer does need to get out to the net for some software communication to occur I believe.
I have done a lot of reading on the net about SNM's and what not but I am still not 100% confident on how to structure/achieve this goal. I guess what I am thinking is the financial cpus and devices would be on a separate subnet and ip that doesn't talk to the standard private lan. If there is an admin or someone internally that needs to access that/those computers from their computer they would then have two nic's one for the private lan and one with the same subnet settings as the financial computer so they can talk. The only missing link is so far with my testing I have not been able to get the financial setup to get outside internet access, it only needs certain port traffic forwarded but I believe the RV016 only allows forwarding on 192.168.1.x addresses as well? Is there a way around this?
Hopefully this makes sense, brain is a little fried today appreciate the help!

wjdenihan,
Unfortunately, none of our Cisco Small Business Routers supply PoE, nor can be powered up using PoE. If you are looking to connect a PoE device to one of our routers, Yes you can use a Power injector to do so, going out bound to the device. e.g. WAP4410n you can use the WAPPOE12. You can find this informaton on the WAP4410n Access Point User Guide
http://www.cisco.com/en/US/docs/wireless/access_point/csbap/wap4410n/administration/guide/WAP4410N_Admin_Guide.pdfhttp://www.cisco.com/en/US/docs/wireless/access_point/csbap/wap4410n/administration/guide/WAP4410N_Admin_Guide.pdfhttp://www.cisco.com/en/US/docs/wireless/access_point/csbap/wap4410n/administration/guide/WAP4410N_Admin_Guide.pdf
I hope this will help.

Similar Messages

How to setup a small office network

Hello,
I am looking to setup a small office network comprising 6 G4 macs (existing computers) that have been upgraded to the newest OS version. What is the best way to go about networking these computers together in terms of being able to share files, internet connection, access to peripherals and also implementing a firewall.
Any suggestions or help would be greatly appreciated.
Thank you

1, Get a cable internet ISP account; depending on your service you should be able to secure a 5Mbps down and 2Mbps up on the cable e.g. Cox or Comcast.
2. Get a good router. The mass market Linksys and Netgear routers aren't very good in terms of reliability. I use a ZyXEL P-330W router is the best I've ever seen. Its reliable and very efficient in terms of throughout. The Apple Airport Extreme is good.
3. Set up the router to support UPnP. This way all computers will be able to share iChatAV video conferencing. If you enabled "port forwarding" only one Mac would be able to use iChatAV video conferencing.
4. Set up your router for DHCP to dynamically issue Internet address to all your computers.
5. Setup the wireless router for encryption such as WPA. This will encrypt wireless communication.
6. Setup the wireless router for only your computers. You'll have to get the MAC/AirPort ID network addresses as expressed in terms of an xx:xx:xx:xx address. You can get this thru your Systems Preferences -> Network window -> AirPort (in the sidebar) -> Advanced button.
7. If you have Ethernet in your office then skip steps 5 and 6 above.
8. On each computer open up the System Preferences -> Sharing and check-off the File Sharing. Set your user access preferences appropriately.
9. Get a Network enabled All-in-one printer and setup Printer Sharing options. Hook-it up to your network and add your printer by clicking on the "+" sign in your "Print and Fax" Preferences.
10. Don't enable Apple Firewall on each Mac. The router will be the Firewall.
Ok. That's the short-hand.. plug it all in and go!

Randomly monitor small office network

Looking for a user-friendly, dummy-proof article on creating a small office network from a total of four Mac's (3 iMacs, one Air), allowing the administrator to randomly monitor without detection the real-time activities taking place on the other two machines. Triple points for iOS monitoring capabilities, as well

Hello, rjbm_exact.
You definitely need a managed switch and a Cisco Small Business (200 or 300 series) can meet your requirements. You can setup separate VLAN to segregate user access level. Are you also looking at expanding your wireless (guest access)?
Let me know if you need more assistance or e-mail ([email protected]) me directly. Kind regards.

Computers on small office network - names getting confused on iChat

We are using bonjour and iChat on the computers on a small airport network in our office as an instant messaging solution in our office - however, 2 of the computers (which are named differently) keep getting confused and both being called the same name.
I have done the fix where you go to System Prefs, Users & Groups and then set the address book card to that particular computer owner, restart the computer and then open iChat (using bonjour) - it saves the name but then my colleague becomes the same name as me on iChat - so we do the same thing to her computer (set address book card etc) and it changes her iChat name, but then also seems to override what I had set for mine previously.
Help!! What can I do to stop these 2 computers seemingly overriding each other? It doesn't happen with the other 4 computers sharing our network...

Hi,
In System Preferences > Sharing is the Name the Computer has.
This does play a part in any Bonjour Connection.
It is this name that appears in Shares in the Finders's Side bar.
Separate for that iChat and Messages that have the Bonjour Account Enabled broadcast the details from the My Card in the Address Book.
Issues can arise with some Server based Logins that create a Global Address book that changes the My Card.
You get similar difficulties on some DiskImage roll outs of updates and the like if the details of the Address Book are copied as well.
I am not sure what you mean by the "fix" in System Preferences > Users and Groups to change the My Card or the Computer's Name.
Yes you can click the Contact Card for that account and it will show you it in the Address Book and it should be th My Card.
Changing the My Card then does not alter which Card is associated with the Mac User Account.
There is no access to the Computer's Name
7:53 PM Wednesday; August 1, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Small business network issues!!!

I am at my wits end with this problem: We have a small business network consisting of 6 Mac Pro computers and 2 Windows PCs. Everything was working fine until we needed to replace one of the WinXP machines with a Windows 7 machine. None of the Macs can see the PCs unless they physically type in the IP address (they used to show up in the finder as the computer name). None of the PCs can access the Macs at all and now shares on one of the Macs are no longer visible by the rest of the network. Any help would be appreciated.
Computers:
Mac Pro 10.7.5
Mac Pro 10.6.8 (x4)
Mac Pro 10.5
Windows 7 64-bit Professional
Windows XP Professional
I have made sure that every computer uses the correct workgroup name and that all file sharing is enabled.

I've seen it take 45 minuyes for a PC to announce it's name on the network, just sayin'.
Anyway, does the PCs IPs ever change?

Small home network using a mini

Hello i'd like to set up a small home network. The component i have are:
A broadband connection via a cable modem
A mac mini which can act as a server (i'd like to provide access to shared photos and music, and connect an external HD for backup and storage)
2 airport wireless routers
2 macbook pro laptops and 1 mini all with wireless
Any suggestions as to the most effective way to link this all together?
Thanks
Tim

Hi Tim,
You've accidentally posted this on the iPod Mini forum, not the Mac Mini!
Mark

Setting up a small business network using mac and windows pcs

Setting up a small business network using mac and windows??

Ok that sounds great. What is your actual question as it relates to AirPort networking? Is it: Can I set up a wired/wireless network with an AirPort base station that support multiple Mac & PC clients? If so the answer is yes.
If, instead, it is how to I configure an AirPort network to support a small business you will have to provide more details on both your networking & computing equipment in order for any of us to help you.

Microsoft Virtual Machine Bus Network Adapter has a yellow !

Hi in my device manager the Microsoft Virtual Machine Bus Network Adapter ? the Microsoft Virtual Machine Bus Network Adapter has a yellow !
Does anyone know how to fix this?

Hi
Firsly try to run Windows updates and see if it can be detected by Windows update and install apprpriate driver ..
Secondly if that did not work try to RIGHT click the Microsoft Virtual Machine Bus Network Adapter and click update driver and choose let Windows look for driver .
Post me your findings
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Cisco small bsuiness Network issues

I have small business network with following equipment
Comcast Providers Internet Router
SA520W Security Appliance
SG300-20-20Port Small Business Switch
From Comcast Router Internetworks fine
after connect SA520W Router I am unable to resolve the host name very quickly its too taking long to resolve host name to IP address while resolving dns is getting failed . I thought there might some issues with Comcast , Comcast tested and no issues their router set to bridge mode .
After that I come to conclusion that SA520w has some firmware issue , I updated the new version of firmware for sa520w
After that connected switch sg300 series after connecting the switch I have similar issue again
Do I need updated the firmware for the switch as well ,can some one provide firmware Link
Or any thoughts on present issue
Thanks
R

Hello,
Im sorry you are having issues with the devices. I really have no idea what could be the problem. Maybe you can try using the DNS servers from google, 8.8.8.8, 4.2.2.1, 4.2.2.2?
Also, here is a link to the firmware upgrade for the SG300-20.
https://software.cisco.com/download/release.html?mdfid=283019616&flowid=18904&softwareid=282463181&release=1.4.0.88&relind=AVAILABLE&rellifecycle=&reltype=latest
When upgrading the firmware, please keep in mind you should step up the upgrade and please don't go straight to the last one as you may break the device.
Starting on firmware 1.3.5.8 you will also need to upgrade the boot code when upgrading the firmware.
Here is a document that explains the process.
http://sbkb.cisco.com/CiscoSB/ukp.aspx?vw=1&docid=08ef98be59904ccc9c4d69a657f5550f_Firmware_Upgrade_via_TFTP_on_200_Series_Switches.xml&pid=2&respid=0&snid=4&dispid=0&cpage=search
Please let us know if you have any more questions

Best practices for setting up users on a small office network?

Hello,
I am setting up a small office and am wondering what the best practices/steps are to setup/manage the admin, user logins and sharing privileges for the below setup:
Users: 5 users on new iMacs (x3) and upgraded G4s (x2)
Video Editing Suite: Want to connect a new iMac and a Mac Pro, on an open login (multiple users)
All machines are to be able to connect to the network, peripherals and external hard drive. Also, I would like to setup drop boxes as well to easily share files between the computers (I was thinking of using the external harddrive for this).
Thank you,

Hi,
Thanks for your posting.
When you install AD DS in the hub or staging site, disconnect the installed domain controller, and then ship the computer to the remote site, you are disconnecting a viable domain controller from the replication topology.
For more and detail information, please refer to:
Best Practices for Adding Domain Controllers in Remote Sites
http://technet.microsoft.com/en-us/library/cc794962(v=ws.10).aspx
Regards.
Vivian Wang

Using Time Capsule to backup a small office network

Hi all,
I am hoping somebody may be able to tell me if this is a good plan or not. I have been really struggling to find a good network backup solution. I've been trying to make a Lacie Ethernet Disc Mini work but have finally given up on that one.
I am trying to find a simple solution to backup a network of 5 macs. 1 is currently plugged straight into my router, another router port extends to switch in another building which has 4 further macs along with other network devices connected. Crucially, there is no wireless access from this building to the router.
Would all macs backup to the Time Capsule, including those that are wired via the switch? If so, at what speed? I have heard suggestions that it can be a very slow process?
I'm not worried about any kind of streaming - purely a good backup device.
All advice very gratefully received,
Regards
Richard

Hi Richard,
I have a small business and chose to use Time Capsule as a backup for my company's network. We have 12 workstations and use all Macs, some wireless and some not. I'm an experienced Mac sys admin and have setup many networks, including designing and installing the network we currently have, which is driven by a Leopard Server.
Based on a year of experience working with Apple's newest airport extreme and capsule products, I would not use them in business and am moving towards a wireless network hd using Carbon Copy Cloner as my software. This is due in part to numerous calls to Apple for support on these items, having to reset them dozens of times, and being told by Apple support that using these products for business is not recommended.
Carbon Copy Cloner is a great tool for a backup, especially for workstations, as you can create partitions for each computer on your HD and CCC will create *bootable* backups of your HD - a great lifesaver if a computer fails and you don't have time to reinstall everything.
I will be putting the capsule and extreme devices on Craigslist for sale and hope to recoup enough to get the wireless network drive, which my research shows is the best way to get network backup solutions for small business.
I hope this helps.

Problem using File sharing in a small office network

I have a problem using File sharing on an Imac and Macbook Pro.
My office has a small network running Windows Small office file server 2003. I have one Windows 2000 PC connected to it and 3 Macs, an 2.4 gHz Intel iMac running Leopard 10.5.6 , a MBP running the same and a Mac Mini running 10.5.
From the Finder Shared window of the Mac Mini, I can see all the computers on the network. It also used to be the case for the iMac, but the MBP could never see the Windows PC’s, not the server or the Win2000. This wasn’t a big problem as I was communicating between the Macs and using the shared printer on the iMac.
On Monday Jan 19 the iMac was suddenly unavailable to the other 2 Macs. It was working normally on the Friday. The iMac can access the Mac Mini and copy files to it. The Mac Mini can see the iMac but cannot access it. Even trying to connect as, ends in a failed connection. I have tried rebooting, turning File sharing off and then on again to no avail.
The iMac now also cannot see the Windows PC’s which it previously could.
To get files from the MBP for printing, I now copy it to the Mac Mini and acces the folder from the iMac, a very tedious procedure. I don’t know why this happened and am scared that the Mac Mini is going to do the same thing.
All three computers are also running VMware 2.0 with Windows XP pro, and from VMware the server is visible on all the computers.
Any help will be much appreciated, I live in a small town in South Africa and the local computer suppliers have no knowledge of the Macs.
I think that the problem with the iMac may have started after a software upgrade to 10.5.6 but I am not entirely sure.
Thank you
ajdk

Well, you're current method sounds pretty good. But if you want to user a file server, hey go ahead.
What you want to do when you centralize project files is to keep track of which one is the newest and becareful not to overwrite files with the same name. So you either have to set up individual spaces on the server (separate AFP/FTP folders maybe), or you'll need to run a file checkout service.
The individual space is cheaper, but it's not much of a difference from backing up to the network drive. Since you have Gigabit connections, you might even opt to save ALL the user files on the server instead of just the project files.
If you want to run a file checkout service, there's two approaches. You can run a service that can host any kind of file, or you can run a version control system for each kind of application (Photoshop, Word, etc.). Please notice, that as you read further and further along, the methods become more and more expensive and complicated. Once you get to this point, it will be necessary to purchase or build software in addition to the Mac OS X Server package.

Newb needs help w small office network setup

Just started a new job at small start-up company that needs their 6-7 macs and a couple of printers networked. I'm just a designer and I'm trying to help but I'm not familiar with osX networking and I hope someone could point me in the right direction. Currently the owner has DSL on all the computers so there is an ethernet cable in each one to a router or hub i believe.
Currently when I try to connect via Go menu to Connect to server, there is no list. If I type in the name of one of the other computers and try to connect I get:
"Connection failed. The server may not exist of it is not operational at this time. Check the server name or IP address and try again."
I don't really know where to start or what questions to ask but I hope having an ethernet cable system already in place is a good thing.
Your help appreciated

I'm starting out with 2 computers near me, G4 HOMER
and G4 MINI. Both are connecting to the net via
ethernet. Personal File Sharing is ON on both.
On G4 MINI, I can see G4 HOMER, but when trying to
connect (Go>Connect to server>G4 HOMER) get
"ConnectionFailed -Server may not exist or is not
operational"
when connecting ot the server try using G4-HOMER.local as the server address.

Setting up a small office network - advice needed

We are to move our small office (3 people) from a shared office environment to our own office space. That has the huge advantage that we´ll finally be Mac-only, but the agreeable disadvantage that there is no longer a networking professional around. And this is where I enter. I now have to find a solution on how to set up the network, and I do not have experience in that field (though I am fairly experienced with OSX).
As of today we have a G5 iMac, a G4 powermac and a G4 iBook. In the not too far future we will be getting a proper G5 powermac as well.
The G4 is used for low key office applications, Word and Mail mostly. The iMac is the workhorse that runs all graphic/video applications. It also is used for presentations once in a while, so that this machine is not always available. The iBook is used for writing and e-mail plus some light-weight field editing.
I would like to find a solution that we could store all important files on one computer, so that it would be easier to make regular back-ups. And everyone could easily access those files.
It would be great if data from iCal and Adress Book could also be stored centrally, such as that addresses are available for everyone, and updated calenders are available for all employees.
As the budget should be as small as possible, I was wondering if we could use the G4 powerbook (867mhz, 1gig memory) to run a sharing service in the background. Then I could also install a second harddisk and use both hdd as a backing-up-raid. Once in a while I would make a backup on a external firewire disk.
Is this a possible solution, or should we rather have one machine dedicated as a server. Would it be sufficient then to use the G4 as that server and buy a MacMini or iMac as the office machine?
Since it is a small network, would I still need an OSX server license, or is the standard OSX enough for this?
iMac G5 20, G4 QS 867mhz, iBook G4, PB 190, and a Pentium that I haven't switched on in months... Mac OS X (10.4.3) Experienced with technology, just not with networking...

There are two ways to set up a network:
1 peer-to-peer
2 client-server
Peer-to-peer is cheaper, but not reliable. Apple supports peer-to-peer in OS X. (In fact, in all versions of the Mac OS since System 7.) You can have up to 10 users connected to any one machine using peer-to-peer. (Warning... if you have more than five users, that machine is going to get slow.) The various peers are used as normal workstations while sharing. You have three peers, and may get one or two more, so you can use peer-to-peer. Just don't overdo it. Your planed usage of a few Word docs and a few graphics files sounds about right.
Under OS X the peers are limited to sharing specific folders only, unless they use 3rd-party software such as SharePoint, which allows the sharing of any and all folders.
It seems that you plan to use the G4 as a 'server' using peer-to-peer. You also seem to be planing to add additional drives, and RAID. I'd get a high end IDE PCI card, or a FireWire card, or a SCSI card, for the G4. Depending on which G4 you have, you can stick up to four hard drives in the case if you go IDE or internal FireWire or SCSI. External SCSI or FireWire drive configuratins are limited only by the drive slots available (7 for low-end SCSI, 15 for high-end SCSI, 63 for FireWIre) and the space available. (And, of course, the budget availanle...) You can get dedicated RAID controllers.
For backup I'd get DVD or tape. Tape holds more and is easier to use, but is expensive (you have no idea how expensive, but I suspect you'll find out) and can be finicky. DVD is a lot cheaper, but it's slow, and someone will have to sit and feed discs into the machine. This will get old really fast. If your backup requirements are modest, DVDs might do, but probably you'll need something else. You could just buy an external hard disk and back up to that...
Apple charges US$500 for OS X Server 10 seat version. (They charge $1000 for the 255-seat version.) OS X Server should run on the G4, and will turn it into a full-fledged server.
Any of the O'Reilly books on OS X Server and/or on Samba should help you get started. O'Reilly's _Using Samba_ has a section devoted specifically to SMB on OS X Server which should be quite helpful.

Creating a small office network with Leopard

Here is the set up. I apologize for the length but I want to explain as much as possible.
I work in a small ad agency that has 6 macs: 1 G4 mini (Tiger), 2 PowerMac G4 Mirrored (Tiger), 1 Cube G4 (Tiger), 1 MacBook (Leopard, 1 iMac CoreDuo (Leopard).
The user names of our home directories are all over the place, some machines have the same user name (two different machines have the same user name "FRED" for example).
Some of us connect to our network wirelessly and some through the ethernet plugs in the walls.
We work off files on an External Hard Drive connected to a MacMini G4 running Leopard.
We have had so much BAD LUCK with this.
Some users can't save files that others worked on because of "insufficient privleges".
SOOOO... we switched the MacMini's OS to Tiger because it worked before we upgraded to Leopard. Now we can't back up the External Hard Drive either by copying the files to a Firewire External Hard Drive or by using something like Carbon Copy cloner.
I have clicked IGNORE PERMISSIONS of the External Hard Drive and the backup Firewire External Hard Drive and still no dice.
SO.... We are starting over. We are getting an Intel MacMini as the brain and two USB externals to set up as a RAID for the file storage. We are then using a third external USB to run time machine.
My questions:
1) Should we create new user accounts on our existing machines to "start over", using unique names? A server guy from another ad agency suggested this.
2) Is there a way to reset all file permissions on the existing external file storage hard drive so that EVERYONE can read and write? I would like to do this before trying to copy all these files to our new RAID External Hard Drives.
Sorry this is so **** long and confusing, but I can't find any straight answers.

jocko homo wrote:
Thanks for the reply. I wish we could get Lepard server but the budget didn't include money to get it unfortunately.
Any chance of looking at the budget again? It seems like an awful lot of work for something that only costs $500.
Does that mean I set the UID for every user to the same Number? I'm not up on what a UID is unfortunately.
It would definitely be a good idea. It probably won't do much to address your problem. It would just remove another layer of complexity. The UID is the user ID. Root is user ID 0. The first user is usually 501, second 502, etc. If you had each machine setup the same way, then user 505 on machine A would have full access to user 505's files on machine B. The actual names are irrelevant. It is the UID that is important.
But again, this does not address your issue at all. You actually need user 505 to access user 501's files. That is something else. Ignoring permissions will work for local file systems, but not for networked file systems. Unfortunately, I'm not really that familiar with network security in an application environment like MacOS X. There are certainly ways to do it and MacOS X server is certainly one way. I don't know the others.

Restructuring Small Bus Network on RV016

Similar Messages

Maybe you are looking for